Dynamic text field not display the text even when the font is embedded.

Similar Questions

• Some Web sites do not display the fonts in firefox.

  For a while through a number of updates, I see that on some Web sites, rolling stone and cnbc are two example. If I go to the fonts in my computer and click on restore default settings for fonts, it solved that temporarily the problem. If I go to the settings and disable Web sites use their own fonts, it solves but fonts do not appear as sites intend to make them appear. This does not happen in other browsers, firefox only. I reinstalled windows fonts 7. I tried to disable hardware acceleration... Still has not solved the problem. How can I solve this problem in firefox?

  Do you know if there is a model of policing does not work? If you right click on the text of the problem and choose inspect element (Q), Firefox should open the Inspector tool in the lower part of the tab. On the right side in front of the HTML source code is a box that can usually shows the style rules. Click small heading fonts to show the font used for the text of the problem.

  When I visit the site, the text of the problem is in "Close Gotham" (with more than words displayed in the attached screenshots). These are downloadable fonts.

• The 37 of Firefox for ownwards does not display the fonts correctly and we tried a lot of things but no help

  I have searched a lot on this problem and have made a lot of things about: config and even he had refreshed and clean installed from scratch, but I can't solve the problem happens on a specific style of police and I don't know how to solve this problem at the time where to search about: config I am sorry to say I don't remember really , but I changed something that has eliminated the problem, but some sites have begun to show another problem, the text was not at all like on soundcloud, time has shown during playback of the track on the image of the sound wave has been hiding this is just an example, although I have my firefox restored and refreshed several times even made a new clean install , but not helped so I like to help with this problem embarrassing, I would really go to any new browser just because of this problem
  The screenshot shows an example

  Try resetting the zoom of page on pages that are causing problems.

  • View > Zoom > reset (Ctrl / command + 0 (zero))
  • http://KB.mozillazine.org/Zoom_text_of_web_pages

  You can remove possible user.js and numbered prefs-# .js files and rename (or delete) the file prefs.js to reset all the prefs by default, including the prefs set via user.js and pref which is no longer supported in the current version of Firefox.

  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/Resetting_preferences

  You can use this button to go to the current Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  Windows hides certain default file extensions.
  Among them .html and .ini and .js and .txt and you might see only a file name without file extension.
  You can check the file extension (type) in the file properties in Windows Explorer via the context menu.

• FontExplorerX does not display the fonts correctly in Illustrator 5.5. I use OS 10.10.1 - Yosemite

  I've recently switched to FontExplorerX to manage fonts. Only with Illustrator, fonts can be viewed as a list (not wysiwyg either). FontExplorer support says that it is a matter of Illustrator because I tried all the suggestions and they didn't work.  I have an iMac mid 2011 and use Yosemite

  You are awesome!  This works perfectly. Bless you!

• Is it possible to display the dynamic value in the ToolTip? I tried: this.assist.toolTip.value = this.rawValue; for a text field 'property MouseEnter', but it does not display the current raw value. It displays a previous raw value of the field... Guilty

  Is it possible to display the dynamic value in the ToolTip?

  I tried:

  this.assist.toolTip.value = this.rawValue; for a text field on 'ownership' MouseEnter

  but it does not display the current raw value. It displays a previous raw value of the field...

  I wrote 'YYYY', but is not displaying on the first mouseEnter event

  

  When I show event mouseEnter for the 2nd time it gives good value.

  

  Now, I changed the "BBBB" value but the first mouseEnter event it displays the value previous i.e. "YYYY."

  

  I found the solution. I wrote the script ("this.assist.toolTip.value = this.rawValue ;") on 'property MouseEnter' but the need to write the script to the "Output" of the field event. ")

  

  Thank you.

• Double click on the ios10 lock screen does not display Apple pay even if it is enabled in the settings

  Double click on the ios10 lock screen does not display Apple pay even if it is enabled in the settings.

  Hello JPMain,

  Thank you for using communities of Apple Support. I understand Apple pay is not an option when the double click the Home button. I know access pay Apple for a locked screen can do so useful everyday. I'm happy to help you to get this resolved with you.

  I recommend first restart your iPhone. This can solve many unexpected behaviours. Follow the steps below if necessary.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

  Restart your iPhone, iPad or iPod touch

  If the problem persists, the next option would be to reset all settings. It takes all the defaults, including passwords and Wi - Fi networks, alerts, notifications, brightness, wallpaper and sounds. This will also remove your cards Pay of Apple. Even if no content is lost with this step, it is always a good idea to back up first. If you do not have a recent backup, use the following link for assistance if necessary.

  The backup of your iPhone, iPad and iPod touch

  Once you have correctly saved, reset all settings in settings > general > reset > reset all settings.

  Have a great day!

• The Task Manager does not display the process and tabs, even if the menu can be seen.

  Dear community, I had a serious problem on my task manager. It does not display the process and tabs, although the menu is visible. Also, any time I open a program or system of adjustment, some and especially no option can be seen since there is no specified words.

  Here is a link that you can see a screenshot on my problem.

  http://kepfeltoltes.Hu/121231/592911021Untitled_www.kepfeltoltes.hu_.PNG

  Thanks in advance for your help

  Original title: Task Manager problem

  I managed to solve the problem by looking for alternatives. Apparently, the problem was caused by a dat file (C:\windows\system32 folder called FNTCACHE.) (DAT) I deleted and it worked like a magic. Everything was normal again.
  Deleted it and the work of all the graphical interfaces as it should.

  Thanks for your answer, in any case. I just post the solution here if someone ever faced with such a question in the future.

  Kind regards
  Laszlo

• iPhone messages do not display the coordinates on the lockscreen

  Ive had this problem fo has for a long time now and not been able to find a solution.

  When I receive a message of some people, the phone does not display the contact information for the message, I just get the number. Its a slightly annoying bug.

  Ive tried the backup phone, wiping and then restore from the backup, but the problem still the problem occurs.

  I tried wiping the phone and from scratch, synchronization with icloud for all my contact information, etc.

  He worked and solved the problem, except that now I don't have one of my old text messages (what I really want to keep as there's several years of conversations evidence it.)

  I found a free software called iBackupbot which allows you to restore a backup file messages and copy them to another and you can then restore your phone to this new modified backup.

  It worked. I now have my restored messages (except the attachments are missing, but I can live with that).

  However, I now have a new problem, when I receive a new message that they are appearing in my list of message completely out of use and not at the top of the list of messages. There seems to be no logic to it, they just pop up as if they were a few months old even if theyre unread.

  I'd really like to find a solution to this problem. I have an Iphone 6 and all the latest software update.

  Thank you

  Jonathan

  Hello

  your problem is a new read does not list according to the order of arrival of messages?

• URL address box does not display the current page.

  With the 4.0.1 update, the URL address box does not display the current page.

  All that shows is the text: «Go to web site»

  To now see the url of the current page, you need to make a right click the empty space is the address box and press the button "esc".

  Is there a way to display the url of the current page?

  This problem may be caused by an extension that is not working properly.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• Why will not display the nested div CSS properties?

  I am configuring a zone of activity featured on a home page.  It should show on the slide show images.  I made sure the values of z-index of the event box divs are much higher than the slide show.  The external div (.featuredEvent-wrapper) does NOT display the background color assigned to it, no matter what I try.  The internal div (.boxEvent star) does not - the color of police, police-family or text-shadow, and the only way I could get it to align the text to the Center was by assigning that to the wrapper).

  Here is the page showing the text to the right of the main logo of the event, but lack the background color dark: http://nottoway.com/index-test.htm

  
  

  This is the same page, but when the slideshow is disabled so that you can see where the text is: http://Nottoway.com/index-test-bare.htm

  I have also attached 2 screenshots, one of the design view in Dreamweaver (CC 2015.1), which shows what should look like the box and the second showing what he looks like downloaded online (and also in Live View mode). The HTML and CSS code are below.

  
  

  Any help that anyone can give me on this will be greatly appreciated!

  Thank you very much

  Robin

  

  HTML:
  

  < div class = "wrapperMAIN" >

  < div class = "wrapperTopSection" >

  < div class = "slideshow" >... < / div >

  < div class = "POLYPOLE-BlackBar" >...

  < div class = "wrapperNav-hand" >... < / div >

  < / div ><!-end-POLYPOLE-BlackBar->

  < div class = "logoHome-wrapper" >... < / div >

  "< div class ="featuredEvent-wrapper' > '.

  "< div class ="boxEvent-star"> < br > < strong > MURDER MYSTERY < span style =" font size: 17px "> Theater </span > < / strong > < br > < br > < strong Saturday > < br > < span style =" font size: 17px "> 30 January </span > < / strong > < br > < br > < style ="font-size"em : 16px "> Details < /em > < / div >"

  < / div ><!-end-featuredEvent-wrapper->

  
  < / div ><!-end-wrapperTopSec->

  
  CSS:

  
  

  {.wrapperMAIN}

  float: none;

  height: auto;

  Width: 100%;

  display: block;

  Clear: none;

  left margin: auto;

  margin-right: auto;

  position: relative;

  }

  {.wrapperTopSection}

  margin-right: auto;

  Width: auto;

  height: auto;

  Width: 100%;

  display: block;

  border-width: 0px;

  position: relative;

  float: none;

  Clear: both;

  margin-top: none;

  left margin: auto;

  }

  {.featuredEvent-wrapper

  Width: 1020px;

  height: auto;

  text-decoration: none;

  text-align: center;

  float: none;

  Clear: none;

  display: block;

  position: absolute;

  right: 7%;

  top: 100px;

  top of the margin: 20px;

  z index: 6000;

  }

  {.boxEvent-star

  position: relative;

  Width: 200px;

  height: auto;

  display: block;

  float: right;

  Clear: none;

  Top: 1px;

  z index: 6400;

  top of the margin: 16px;

  padding-top: 25px;

  padding-bottom: 25px;

  color: rgba (255,255,255,1.00);

  Police-family: display playfair, Georgia;

  do-size: 16px;

  text-align: center;

  text-decoration: none;

  text-shadow: 3px 3px 3px rgba (0,0,0,.8);

  background-color: rgba (0,0,0,.8);

  Overflow-y: auto;

  }

  Oh, you did allright. I found class .boxEvent-featured towards the end of the mainStylesheet.css.

  But there's another bug:

  A '} ' missing and, therefore, the browser is not made all the following lines.

  Look here:

  

  Fenja

• After installation or upgrade to Firefox 31, starting Firefox does not display the home page, personalize displays a blank page and the radio button does not work

  I am the admin of Windows for a University Department and install PC with Firefox all the time. This problem does not occur with every PC I would maintain, only a selection bit (model different laptops with Windows and update 1 8.1.) Until today, it has happened with the new user (with admin rights) accounts that I place on laptops for our staff. Today, this happened with the account administrator while setting up a new laptop. In all cases so far, I have install Windows from a registered image that was created by using sysprep.

  I tried many suggestions to reset Firefox, removing the profile of Firefox users, removing the Windows profile users, uninstalling/reinstalling Firefox, uninstall/reinstall of Firefox and the latest Java, but nothing helped. After uninstalling, I run an application to delete the caches and temporary files and even remove manually the keys to register HKLM\SOFTWARE\Mozilla and HKCU\SOFTWARE\Mozilla. I restart and make sure that the installation folder is deleted after uninstalling.

  Results are the same: after installing Firefox 31, the initial settings for migration, IE or Chrome pop up and after having clicked on the button finish, Firefox starts but does not display the home page of the new user, only a blank page. By clicking on the Options (3 bars) button does nothing. Right click in the appropriate box, the shortcut menu appears, so I can choose to customize, but which opens another tab with subject: Customize the URL and the page is blank. In the right click context menu, I can activate the menu bar and get options from that.

  My last attempt helped a little. I uninstalled Firefox 31, cleaned, removed the profile user Firefox, rebooted and then installed Firefox 30. Initial start-up runs and tells me that I'm not up-to-date and the works of button Options. But I can't always customize.

  Then I upgraded to Firefox 31, but then it's back to no start page, no options button and no customization. I can go down to 30 and get customize practically works again.

  Addon only is for McAfee Scriptscan to Firefox 15.1.0, just after installation is disabled.

  Any help would be appreciated. Thank you.

  You can try a different theme of Windows?

  Have you tried to start the computer using Windows safe?

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/

• Navigation toolbar does not display the URL

  When I go to a website, the section of the navigation toolbar that displays the URL of the page is no longer indicates the URL http://www as he always did in the past. The size of the part has been reduced. Has expanded the area where you type URL for search engine. I have no problem with the navigation, history, bookmarks, tabs bar, etc. Only problem is that the URL does not display the page. Even this page has no URL displayed in the navigation bar. It has the logo for mozilla and when I put the cursor on it, it says it all "Web site does not provide identity information." The same shows for each site than go. Yes, I can to bookmark the page without any problem and can use bookmarks to return to the page. But no URL appears in fact as he always did in the past. Oh, I have an IMac and use a keyboard of razor.

  Hello.

  You should be able to resize the address bar, if the search bar is to the right by simply sliding the space between the address bar and the search bar.

  If that does not solve your problems, it is possible that you have a problem with some Add on Firefox which is an obstacle to the normal behavior of your Firefox. Have you tried to disable all add-ons (just to see) to see if Firefox goes back to normal?

  Whenever you have a problem with Firefox, whatever it is, you must make sure that it is not caused by one (or more) of your installed modules, whether an extension, a theme or a plugin. To do this easily and cleanly, start Firefox in safe mode (remember to select disable all add-ons when you start safe mode). If the problem goes away, you know that it's an add-on. Disable them all in normal mode and allow them one by one until you find the source of the problem. See this article for more information on troubleshooting extensions and themes and this one for plugins.

  If you need help with one of your modules, you will need to contact the author.

  If the problem does not disappear when all add-ons are disabled, tell me please, then we can work from there. Please be afraid not to follow my instructions to the line, as everything can be easily undone.

• Save dialog box under does not display the list of files

  Terminal Server R2 of 2012.  Dialog box "Save as" for a user does not display the list of files.  The address bar shows the way, there is a form for the file name box, and the user can save the file successfully.  But the space that would show the files in the selected directory is empty.  There is no form for the list of files box, it's just the grey box dialog box space - that is to say, it is not that it looks like an empty folder, there is simply no display form box.

  The 'Open' dialog box appears normal, showing the list of files in the selected folder.

  I had the user close the session on the Terminal Server and access it from another PC, even if I was not expecting to make a difference, and it didn't.  I have also connected on myself and has not experienced the same problem.  So it seems to be user-specific.

  What a setting, the user has selected by mistake, or a mistake any?

  Thanks for any help.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows does not display the CD-ROM drive

  A week ago, my computer stopped showing me an icon for my DVD player. When I go into the Device Manager there is no option for CD/DVD players. I tried Microsoft Fix It, and he told me that there is no CD drive. I can not re - install a driver because the Device Manager does not display the CD players.

  I did not major changes to my computer I know so I can't imagine what the problem is. Help?

  Trevor

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================================

  After the foregoing:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• BlackBerry Tour 9630 smartphones does not display the name of the caller

  Hello

  I have a Tour 9630, version sw 5.0.0.732.  When the phone rings, it does not display the name of the caller, their telephone number, although this number is in my address book.  Once I answer the call, the name will be displayed.

  Naturally, I would like to know who is the caller before I answer!  :-)

  I found a few messages, ask something similar, although for different model phones.  Some of them suggest that I have to disable protection for the content... but I can't find it in the options.  Even in the User Guide, it contains instructions (go to Options > Security Options > General settings... but there is no "General settings" on my phone.)

  If anyone knows how to solve this problem, I would be very grateful!

  Kind regards

  Options > Security > encryption > include contacts.

  There could be other solutions... Try these:

  1. make sure that you set your own country code to the Phone Dialer screen > Options > smart dialing.
  Set your country code in this format: "+ xx" where xx = country code. Some countries have two or three-digit country Codes. Do not place not the '+' in the entrance of your contact.
  * In the United States, the value of this country as '+ 1' Code and place your local area code in the appropriate box (this normally the default setting in a new BB).

  2. in the same place, change the length of National number for the number of digits corresponding to your country (since some countries have less than 10 as that set by default in the BB). Check out the total numbers, less country code. Do not place not the '+' in the entrance of your contact.
  * For example, some countries have a total number to 8 (more than 3 for the country code). You must enter '8 '.