e/s series does not

Similar Questions

• my hp photosmart C4600 Printer series does not work via my bluetooth USB 2.0 Wireless printer adapter, I run windows 7

  my hp photosmart C4600 Printer series does not work via my bluetooth USB 2.0 Wireless printer adapter, I run windows 7

  He ran once before, one of my suggestions of solution was the coil (?)  was incorrectly, but don't know how to adjust it

  Hello
  (1) have you made changes before the start of this issue?
  (2) what is the exact error message/code?
  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print. If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, Spooler subsystem or spooler resources, you might need to change and then restart the print spooler service on your computer.

  To do this, we recommend that you save your work and restart the computer to restart the print spooler service. If you do not want to restart the computer, try these steps.

  To change or restart the print spooler service

  You must be logged on as administrator to perform these steps.

  a. click the Start button, Control Panel, click System and Maintenance and then click Administrative Tools.

  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. right-click on the print spooler service and then click Properties.

  d. on the general tab, next to startup type, make sure that automatic is selected.

  e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Additional reference:
  Open printer troubleshooter.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
  Let us know if that helps.

• Orders series does not work with the string constant

  I have a single serial device, I used.  The device requires no handshake.  Simply send a command to the device and the device responds.  I modified the example labview for simple serial communication and that works when I enter the chain command and click the button to send the command to the device.  But when I tried to put the same example of communication series in a simple state machine where I replace the chain control on the front panel with a string constant on the scheme that the standard equipment does not respond.  Where do I go awry with the constant string and the state machine?

  Thank you

  Control of the working channel is \-codes display, while the constant diagram is in normal display. Once you pass the constant \-codes diagram, you will see that it is in fact "/ 1ZR\\r\\n". Switch to \-codes, re - enter the text you want and see if things improve.

• Have a HP E709N series does not recognize paper size and only prints in color

  original title: have a HP E709N series with 2 numbers.

  (1) fax - does not recognize the format of paper on every page. He feeds a blank page out and I have to press OK to print each page.
  (2) when a print job is qued, it prints in color, not black.  Color cartridges are low, but I am printing black docs.

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  using the information how to use etc. and drivers for your printer, please read the information contained in the links below

  drivers

  Choose vista or vista 64-bit according to your operating system

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3795406&LC=en&cc=us&DLC=en&submit.y=4&submit.x=11&lang=en&cc=us

  and read the information on the use of the manuals troubleshooting etc. for your model below

  http://h10025.www1.HP.com/ewfrf/wc/product?product=3795406&LC=en&cc=us&DLC=en&submit.y=3&submit.x=8&lang=en&cc=us

  If that does not fix it try hp support

  http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=us&lang=en&product=3795406

  or hp support forums

  http://h30434.www3.HP.com/

• After that recommended BIOS upgraded satellite a series does not start

  During the recommended BIOS Flash upgrade of the system came in suspended state.
  I waited 1 h before trying to restart the laptop, I had to do with force by removing the battery.
  Now the system does not even show the bios screen. Is there a way to fix this problem?

  Hi Tom

  Obviously something went wrong with the BIOS update and now BIOS is damaged.
  I'm afraid there is nothing you can do except to authorized more close contact and ask for help.

  I'm sorry. :(

• DVD - RW DVR-K17LF for the Satellite series does not read DVD but only to CD

  Hello

  I have a serious problem with my DVD player.
  He stopped to work. I mean, he's not reading CD but not DVD discs.
  I don't know what the problem is.

  I went on the internet and found no solution.

  Please help me.
  It is not a software problem, because my laptop does not start the DVD, but due to the CD...

  Hello

  The issue could be linked to the anomaly of the player's laser lens.
  Maybe the lens can not handle the DVD because of a physical constraint.
  In most cases, the lens can not calibrate properly and therefore different media would not work.
  In this case there is not much to do in most of the cases that the drive needs to be replaced.

  But maybe you could try to clean the drive s laser lens using a cleaning professional who could be bought from the other computer dealers.
  I don't very well if this will help but it s worth to try m

  PS: Try this:
  Remove the drive from Device Manager, access the registry and remove the filters top and bottom of this key;
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Then restart the laptop and check the functionality of s by car.

• Drive DVD/CD of Satellite a series does not work properly

  My computer sometimes starts fast and when it does recognize the DVD/CD player and functioning.
  However when she takes it the start time, it does not recognize that I have a DVD/CD player, when I look in Device Manager to see if
  There is no probs it simply says that the device is functioning properly?

  Does anyone has any ideas at all the

  Would be nice of you if you could give us MORE details; for example what operating system you have, what kind of machine you have and so on.

  It s hard to help someone, when that person said: my CD does not work, then it works then not again. It is not a description of the error.

  PLEASE MORE DETAILS

  THX

• PowerSaver shortcuts on the Satellite a series does not work

  I have almost everything (except Toshiba assist) installed for XP from the download page, but the shortcuts doesn't work for the brightness with the Fn key... In addition, Toshiba controls does not appear in the start menu or does not start after the installation...

  Can you please exact notebook model poster you have? Your laptop comes with the Vista operating system?

• HP deskjet 3520 software series does not start

  After installing software for my Deskjet 3522 base, the program does not start. He did start on my first install but stop working after a while. Maybe after some updated. Now I reinstalled but still does not, not fromm the shortcut on the desktop or the start menu.

  Cordially Leifs1

  Hello Leifs1

  I suggest copy and paste this link in the browser. Download and install: ftp://ftp.hp. Com/pub/printers/sclitefileassociation/SCLiteFix_299026 .exe

• DeskJet 1050 J410 series does not Excel files print

  My printer does not print Excel files.  I have read some other posts that suggest to reinstall the printer driver I did.  My printer print Excel for awhile and then a few weeks later, it will not print again.  There is no error message.  The print queue displays a document to print, then just disappears.  I guess I will upload once againprint driver, but I don't understand why it keeps doing it.

  Hello

  Please uninstall the driver first by going to control panel-> programs--> programs and features, and then UN-installing from there.

  Download the latest driver full features software (please correspond to the version of the OS system pilot & 32 bit / 64 bit with the system and the PC OS).

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=Al-109412-2&mode=4&IDX=1&JumpID=reg_r1002_usen_c-001_title_r0003

  Re-install the software downloaded and see if the problem still persists.

  I hope this helps.

• My photosmart A710 series does not turn on.

  any ideas of rml

  Your power cord or printer turns off if the printer does not turn on.  Parts for your printer are not made or sold more, so the only option would be to replace the printer.  I'm sorry.

• Number of computer evolution series - does not work

  Hello. I recently bought a new MacBook computer without cd rom port. I need to know how to download and install Adobe Creative Suite Design Standard, I had on my old computer. I have a serial number, but it does not work. Any ideas?

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• Hello my number series does not work... I don't know what I can do:)

  I'll registries my product but my Seriennumber does not work...

  Hello

  Error "serial number is not valid for this product". Creative Suite
  http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-valid-product.html

  Error failed to validate the serial number | CS6
  http://helpx.Adobe.com/Creative-Suite/KB/unable-validate-serial-number-CCM.html

  To locate the serial number:

  http://helpx.Adobe.com/x-productkb/global/find-serial-number.html

• I have Adobe Creative suite 2 premium CS2-series does not work when you try to install on a new computer, help!

  trying to install on my new computer did not work because activation is cancled by adobe. Downloaded the adobe CS2 version (https://www.adobe.com/cfusion/entitlement/index.cfm?e=cs2_downloads) and my serial number does not work.

  What can I do?

  You must use the serial number allowing Adobe to the special download version.

  Error: Unavailable activation server | CS2, Acrobat 7, hearing 3 -.

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

• CS6 'Bought the series' does not

  Hello

  I bought a year ago for CS6 Web Premium Edition. I installed it on my desktop and my laptop.

  Today I trashed PhotoShop, using the Adobe Creative Cloud Cleaner. No idea how it happened.

  So, I wanted to reinstall.

  I could reinstall only that by clicking on "trial". My set has not been accepted.

  Also after installation, that my series is not accepted, the same series that is on my Adobe ID page.

  ??

  All solutions?

  Gr. M

  Mac OS x 10.6.8

  Shame, shame, I thought I had purchased a full license, but it is was just valid for one year. I renew my subscription. (higher education)

  Not yet used to this business model.

  Sorry for the inconveience.