PLAYSTATION 3 and WINDOWS MEDIA PLAYER

Similar Questions

• Problem installing Real Player and Windows Media Player

  I go online and download real player and windows media player. When I try to install, I get a message that tells me that they can not install unless I'm onlline. I'm online. I click try again again and again and re download again and again. Whenever it is the same thing. Just does not recognize that I am online. What can I do?

  Hello

  1. what version of Windows are you using?
  2. What is the exact error message?
  3 did you changes in the computer before this problem?
  4. what version of Windows Media Player you are trying to install?
  I suggest you run the fix it from the following link, restart the computer, try to install a drive and check.
  How to solve problems when you install or uninstall programs on a Windows computer
  http://support.Microsoft.com/kb/2438651

• Windows Media Center and Windows media player 11 will not work on my Gateway (Vista) computer

  On my windows media player, I get the following comment after I try to read the dvd:
  Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card.

  On my media center to windows, I get the following comment:
  The dvd can be used by other players, need to change resolution b/c it is too high.

  But Tuesday, I played the DVD without problem and now, I am confused and I need help to understand what is happening.

  Hello texanbelle,

  Thank you for using the Microsoft answers Forum.

  I am including instructions below a scan to help repair the system files related to some components of Windows, including Windows Media Center, and Windows Media Player.

  Repair Windows Vista Media Center files

  You can use the following steps to repair files that are part of Windows Vista Media Center:

  1. click on the Start menu, choose all programs, then Accessories, then right-click on the item to the command prompt and select run as administrator

  2. click on continue to allow it to open a prompt with administrator privileges

  3. run this command in the cmd prompt: sfc/scannow

  4. the cmd prompt should list text stating "start system analysis. This process will take time. »

  5. wait for the scan to complete (this may take several minutes, so be patient).  This command will scan all protected system files and attempt to replace the incorrect versions by appropriate Microsoft versions

  6. once the analysis is complete, the SFC tool will indicate whether or not it found no problems and whether or not he was able to correct

  7. If any errors are reported that SFC could not resolve, there are steps in this knowledge base article which explain how to locate and attempt to correct errors

  8. after fixing errors that are found, try to use Windows Vista Media Center again.

  Fix Windows Vista Media Center registry entries

  Unfortunately, there is no easy way to fix key/registry values that are installed by Windows Vista, as there are files.  If you want to try to repair the registry values/keys that are part of Windows Vista Media Center, you will need to re-run the installer of Windows Vista operating system and repair the operating system.

  Try this and tell us if it helps with your question.

  Judd
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Using Windows Vista and Windows Media Player with Sanyo R227 Internet Radio

  I just bought a Sanyo R227 Internet Radio wireless.  He has no problem using my home network wireless and find the Internet gateway and play Internet radio stations.

  However, it also has the ability to access and attendance of the media playing on shared Music folders.   The installation instructions are very simple, but again, I have to be able to connect.  (Someone else I know has no problem with XP).  Read the fine print, Sanyo said it is checked with Windows 2000 and Windows XP, but there is no mention of Vista.  When I emailed them, they said that they did not support Vista.  However, I found a few articles to say that they tested it with Vista, just no mention of what they did to make it work.  I don't know that Sanyo is not interested in checking out Vista, because Windows 7 is now available.

  I have a Toshiba laptop running Windows Vista Home Premium SP 2 and Windows Media Player Version 11.  Also, I have Symmatic installed Smart Firewall (Norton) and enabled Windows Media Player and Windows Media Player network sharing service. I got Symmatic take possession of my PC and make sure these settings are correct.

  I turned on the multimedia file sharing, file sharing and network discovery.  Because my PC is to use the Norton Firewall, Windows Firewall is disabled.  The network type is Public.  Privacy requires the Windows Firewall, which confuses the Norton Firewall.

  When I scan to PC on the webradio of Sanyo R227, he never finds my laptop.  I'll try to turn off the Norton Firewall and see what happens, but I don't think that's the problem.

  Anyone out there have experience with this device, media player and Vista?

  Turn off the Norton Firewall and it worked.  Now I have to talk to Symantec and find a way to make it work with the firewall turned on.

• I'm reading a file mpeg and Windows Media Player C00D1199 error. How to get good download of the missing codec?

  I'm reading a file mpeg and Windows Media Player C00D1199 error.  How to get good download of the missing codec?  I have windows 7 x 64 os.

  All is not lost.

  Download and install a pack of codecs, such as K-Lite (Google for it). You can find THAT WMP can then read the file.

  Or

  Download and install a small program called Gspot (Google it)! Drag and drop in its window one of the files, you can't plzy. It will tell you which codecs are used. You can then download and install the only after doing a search on the web for it.

  See you soon,.

  Jerry

• Music in Spotify, iTunes and Windows Media Player

  Well, I tried to use my programs of music on my computer for about a week and a half now, and that they won't play all my music. Not at all.  I went to support these programs, but they did not really help. I also checked to see if any of them were incompatible with my computer, which iTunes was the only one, and I have uninstalled and reinstalled the version 64-bit for Windows 8 and still nothing.

  I don't know if it's the sound of my computer, which I don't think it is, because it works for everything else except these three programs. And I have no idea why, and frankly, it's getting boring. I also checked my device manager and my sound system and everything is working properly.

  Anyone who can help and give me some answers on this as soon as possible, it would be greatly appreciated!

  Hi JennaHarske

  I understand that you have no noise while trying to play your music programs.

  Here's a url with different fixes for this issue that might be useful.

  https://discussions.Apple.com/message/23448027#23448027

  This url allows you to use Windows Media Player and no sound.

  http://www.computerhope.com/issues/ch000682.htm

  Please provide the following information so that I can better help you.

  Did you upgrade to Win8?

  What is the name of the sound card you are using?

  Click Start, type "Device Manager" and press ENTER.
  
  Expand the section "audio, video and game controllers".
  
  Right click on your sound card, and then select "Properties".
  
  Go to the Details tab.
  
  Select "Hardware ID" from the menu drop down.
  
  This post here.

• ARCHOS 8o G9 and Windows Media Player

  ARCHOS 8o G9 will not be related to my pc with Windows Media Player after a few transfers of files. Y at - it an update of the driver USB that will be useful to you? Ah yes and when I look in Device Manager the Archos is listed, but with an exclamation point and says device driver not installed.

  Hello

  -Did you change on your computer before the show?
  -

  Follow these steps and check if they help.

  Step 1:

  I suggest you to update the drivers for your ARCHOS 80 G9 from the manufacturer's Web site (as applicable).

  Step 2:

  Reinstall the drivers and see if that helps.
  http://support.Microsoft.com/kb/283658

• I have about 4500 titles on an external memory that I play in my laptop and Windows Media Player. Towards the end of the reading of a beach, she starts to jump every time.

  Need help with windows media player. I have about 4500 titles on an external memory that I play via my portable media player and windows. Which is annoying, when he's near the end of a track that plays it skips and jumps. It does on all of the tracks I have on it and on exactly the same point to the end. Now, I know that's not the tracks they play all very well through any other media player. The problem with Windows media player and I can not solve it is not a computer enthusiast I am one little loss. Any ideas?

  The following article might be worth a visit:

  Windows Vista-
  How can I stop my music skip or break down when I play?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-stop-my-music-from-skipping-or-breaking-up-when-I-play-it

• Module of persistence and Windows Media Player has stopped working Vista

  I get a message when I reboot the persistence module has stopped working. Windows Media Player has also stopped working.

  Hi Greg,.

  Since when are you facing this problem?

  Method 1: Run the fixit available in the article below

  When I try to use Windows Media Player 11, the program does not start, or some UI elements are blank
  http://support.Microsoft.com/kb/925704

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

   

  Method 3:  Select the boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Your double post, I see you have a codec problem

  Method 4:  Download and install the codec, see the link below to do this:

  Codecs - frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

• Unable to sync music using Windows Media Center and Windows Media Player will not open

  Media Center will not sync music!

  I recently opened Media Center and I had no music in the library. I have constantly played music from the library so I didn't know what is happening. When I try installing the library again once it tells me that a necessary component for Windows Media Center is not available. I have not changed or downloaded something different. I went to check if Windows media Player is the multimedia file sharing. The message I get from that is, basically, that something is missing.  Now my Windows Media Player is not even opened. I wonder if my Zune Player (80 GB) has nothing to do with the problem. I charge my player when this has happened, but I do this all the time so I am at a loss. I went to the page "problem reports and Solution." It is the symbol of the Media Center window and says that the problem is caused by Windows. The solution is to update to windows; which I am fully updated. I tried to restore the system to an earlier date, but that doesn't work anymore. I'm at a loss to know what being of any help would be appreciated.

  As a side note video playback, TV and photos also works very well in Media Center.

  Thank you

  Shay

  Thank you, Shay

  Hi Shay,

  You can try the following steps and check the result:

  Step 1: Run the sfc scan to repair system files missing and corrupt.

  a. Click Start, click programs, accessories principally made, right click Guest and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  b. type the following command and press ENTER: sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information, visit this link:http://support.microsoft.com/kb/929833

  If the problem persists, try the reconstruction of the library:

  Step 2: Library rebuild Windows media player.

  This problem can also occur if the library is corrupted. Rebuild the library and check if this solves the problem.

  Follow these steps:

  1. exit Windows Media Player.

  2. click on start, run, type %LOCALAPPDATA%\Microsoft\Media Player, and then click OK.

  3. Select all the files in the folder and then click on Delete on the file menu.

  Note: You don't have to remove the folders that are in this folder.

  4. restart Windows Media Player.

  Note: Windows Media Player automatically rebuilds the database.

  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  1. exit Windows Media Player.

  2. click on start, run, type % LOCALAPPDATA%\Microsoft, and then click OK.

  3. Select the Media Player folder, and then click on Delete on the file menu.

  4. restart Windows Media Player.

  You can also view the following green button and check if it helps:

  http://thegreenbutton.com/forums/t/38766.aspx

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Only get a white screen with Windows Media Center and Windows Media Player

  My Center & Windows Media Player do not work. Only, I get a blank screen. I would like to reinstall, but I don't want to reinstall all Windows Vista Home Premium. How can I reinstall the only Media Center?

  Hello, Rob Davis,.

  Please check Application, system logs and Event Viewer Security for possible errors for the time that you tried to connect to Windows Media Center. Go to the computer and right click. Select manage. Then select Event Viewer, and then click Windows logs. In addition to this, you can check the newspapers of Media Center under the Application and Services logs. See if you have errors on Media Center.

  Then, update your most current video driver. If you have an OEM computer, go to the site such as Dell or Acer, etc. Download the latest for your computer, such as the graphics drivers or video drivers.

  Please answer back with an update and let us know if it helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Compatibility issue with DVD Maker and Windows Media Player

  I was helping a friend with his DVD Maker and after successfully completing a DVD (music and images) using Windows Media Player music on our second attempt, he indicated that there was a compatibility problem with the music that he snatched from Media Player. He said that it would not accept the ".wma" format.  How do fix us the problem?

  I was helping a friend with his DVD Maker and after successfully completing a DVD (music and images) using Windows Media Player music on our second attempt, he indicated that there was a compatibility problem with the music that he snatched from Media Player. He said that it would not accept the ".wma" format.  How do fix us the problem?

  I'm no expert in this area, but I think that you used the wrong application, namely Windows Media Player.
  A month ago, I did 2 DVD with images and music. Here's what I did...
  Open Windows Movie Maker...
  1. I imported images in the timeline.
  2. I imported the music (wma in your case) file to Audio column / music.
  3. I have synced it so that the images and the music would start and end at the same time.
  Note : If you already have the video file with import loan, then simple music video to the timeline and go to step #4.
  4. I clicked on publish on DVD.
  Windows DVD Maker wil pop up. You know the rest of the steps.

  t-4-2

• Musical colors and windows media player 12

  I am trying to add colors musical back to windows media player 12 and I can go on throughout the regsvr running via the cmd prompt, but when I open the Media Player for music colors file is empty.

  I am running windows 7 Home premium x 64 bit edition

  You don't have to do anything special at all.  Just press Ctrl + 3 to go to the "view is on-air" and do a right click and choose your visualization of music:

  

• Sound and video in youtube and windows media player jerky

  Hi all, hope someone can help me

  right, basically when I watch videos on youtube, they start well, but all throughout the video, the sound starts stuttering / video starts stuttering or cutting don't know what you call and he also stutters my mouse.

  Now this problem as it was the case for some time and I don't know why

  in any case in the last 2 weeks or so, because I watch movies saved on my pc I watch with Windows media player and it is this same like youtube, the sound and video stutters/restless

  now I have some advanced installed package cole2k media codec (iv always used it with no problems so im guessing that isn't the question.)

  I tried to update my sound and drivers in the Graphics Device Manager but he says they are up-to-date,

  I have the latest version of windows media player.

  I have the latest version of the flash player

  the codecs are so far

  all audio enhancements are disabled in the speaker settings

  my system is

  Windows 7 ultimate 64-bit

  Asus p5kc motherboard

  2 GB corsair memory

  Intel quad core q6600

  If you need more information to help me please ask, I just solve this problem, iv never had before

  Ive had to repost this question because I have people stopped talking last time I asked, and I really need to solve this problem please someone help me

  Hello Matt,

  No, sorry, we do not support remotely. If you want, and are able, you can always do a video or take snapshots of your desktop and post a link to them here. A lot of people do.

  Another thing to try that I had some success with is download and install a new set of codecs. This is the 64 Bit freeware game that I use on my bench, give it a try: http://download.cnet.com/K-Lite-Codec-Pack-64-bit/3000-13632_4-75157090.html (make sure to use the Direct download link).

  Keep me posted and let me know how you fare.

  Kind regards

  BearPup

• Sonos and windows media player 12 someone it work?

  I have a sonos system and I was wondering if I can use my windows media player to play songs through my Sonos system?

  Hey Joe,

  According to Sonos, it is compatible with Windows XP SP3 and later versions of the Windows operating system.

  For more information,.

  http://www.Sonos.com/documents/productguides/en/macpcguide_en.PDF

  For more information related to creating multimedia streaming, see the following links.

  Getting started with streaming media

  Windows Media Player network sharing in Windows 7