E709a printer is no longer on the network

Similar Questions

• Is there a problem with the printer on and not on the network

  Hello

  I have a home network wirelessly with a computer (64) of windows 7 and a Photosmart c7280 printer all-in-one.  When I look on the network, I see my network card and at the bottom it says printer cannot be placed on the network.  I then click on see other devices on the network and I can see my computer, router, media player and the same printer - at least of the same name - as a device that could not be placed on the network.   Is this normal and is it a problem to have it.  The name that I see in these two places is the hostname I gave the printer.  Thanks for any help.

  Hi rayjohn,

  I think that what you see is the printer as discovered by Universal Plug and Plug, known as UPnP.  The main feature of this, he seems to find the printer and the host name is part of the same name.  You really can't get rid of it because it comes right away again when Windows find the printer on the network.  It can be ignored as it will not interfere with normal HP software that can be installed on the computer.

• printer cannot be contacted over the network

  I have a HP deskjet 656 printer that I added as a network printer. I installed it on my computer laptop windows 7, which went well. However it does not print. The touble shooter printer tells me to 'the printer cannot be contacted over the network. It works from another laptop I have but not my laptop Windows 7.

  I had a similar problem with my new Windows 7 laptop. After a power failure, the laptop would not recognize my HP printer and the error was that "the printer cannot be contacted over the network" so I spent a lot of time to solve the problem. Finally helped the simplest thing was that I removed this printer in my list of printers and added again using the "Add a printer" Wizard and it worked perfectly!

• HP 8600 printer range is found on the network after you have installed the Dymo printer for processing of credit cards

  HP 8600 printer range is found on the network after you have installed the Dymo 450 Turbo printer for processing of credit cards

  Hello Christina,

  1. What is the IP (Internet Protocol) address, the subnet and default gateway of the printer?

  2 have you tried to Ping to the IP address of the printer?

  Reset the printer can help get the problem solved.

  Perform the steps mentioned below to get the address of IP(Internet Protocol), subnet address, and default gateway.

  a: Type CMD in the search box start and press ENTER.

  b: now, type Ipconfig/all and press ENTER.

  Proceed as for Ping to the IP address of the printer.

  a: Type CMD in the search box start and press ENTER.

  b: type PING (IP address of the printer) , and then press ENTER.

  Reset the printing system:
  a: Go to System Preferences > Print & Fax
  b: Right (or control), click inside the box that lists your printers and select Reset Printing System.

  WARNING- This will remove ALL your printers!
  c: Select the sign more to add a printer. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  Click on the link mentioned below as reference.

  http://Windows.Microsoft.com/en-in/Windows7/install-a-printer-on-a-home-network

  Note: "Check the title that reads" set up a network printer "

  Answer please if you have any questions.

• Error found: iP1600 printer can be connected to the network

  Title: Problem of networking; model of the host is running XP and can not print from computer laptop/WIN 7

  Hi, my host comp. is running WIN XP and laptop WIN 7. I've already updated the printer driver Canon witch is connected to the host model. On the hardware of the laptop I can see the printer is on a network, but... cannot print the test page / troubleshooting of the error found: iP1600 printer can be connected to the network.

  I also downloaded on laptop CanonPrinter add-on driver, this driver necessary?

  Hello

  I suggest you install the drivers for PIXMA iP1600 on both Windows XP computer and check if the problem persists.
  PIXMA iP1600
  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_ip_series/pixma_ip1600#DriversAndSoftware
  Hope this information helps.

• hp 8600 printer cannot be contacted over the network and the printer is not enabled.

  hp 8600 printer cannot be contacted over the network and the printer is not enabled.

  the HP software installed on the PC on the floor. Print wireless from PC upstairs and the PC in the basement on the network for the last month up to yesterday

  Now to receive above - two error messages cannot be contacted ove RL network and the printer is turned off.

  Reality - the printer IS on and the PC on the floor can print to the printer.  Network on the printer symbol says it is connected to the network.

  a reason any PC in the basement all the cant suddenly find the network and the printer?

  Hello

  The first thing I would do is follow step 6 in this document to set a static IP address: http://support.hp.com/us-en/document/c02817031
  When it askes for the DNS information, enter in Google DNS. Preferred DNS = DNS Alt = 8.8.4.4 8.8.8.8

  This could increase the stability of the network connection to the printer downstairs.  If this does not help, let me know what OS is on the computer causing problem, because that could cause a problem?  Other than that, you can check the quality of the signal you get form the network and see if this can be a problem.

• Wireless printer is not connecting to the network of "n". How to connect?

  I have a wireless HP 6980 printer.  Due to interference - our router went to pure "n" for speed.  Connects the wireless printer is no longer through the router.  How to get to the wireless printer or what I have to to get ethernet.  Thanks for the tips.

  Hello

  the printer only supports 802.11n connection...

  http://support.HP.com/us-en/document/c00569571

  Enable mixed mode or connect via ethernet cable. I would use earplugs if necessary...

• Connect my computer is no longer in the network printer.

  MY COMPUTER will BE No. LONGER CONNECT to NETWORK PRINTER - ms virtual wifi miniport adapt has a driver problem (code 31) - cannot LOAD THE REQUIRED DRIVERS - Please HELP - have spent hours

  Hello

  It's a problem with your wifi driver.

  Open Control Panel, click hardware and sound. under devices and printers, click Device Manager. Expand network adapters and then double-click your network adapter. go to the driver tab and then click on set to update driver (leave the pc it automatically searches). Once he did try if everything has worked.
  see this page for more information:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  I hope that helps!

• L7680 JO is no longer on the network

  I have a L7680 all-in-One, since this model is released - I think about 10 years.  It's a great printer.  Suddenly, he "fell off" my network, and I can't put it back on.

  I use a wired Linksys Cisco network and the printer must receive its IP from the router's DNS address.   One day - no known cases happened - the printer is no longer "considered" by our computers.    I went through the following steps to reset it:

  -Reset network

  -Reset the printer to factory settings gradually try the following reset tips: #3, #6, and #9, which none worked.

  -in network settings, it shows the following IP address, which is a mystery to me: IP = 169.254.60.53 (normally it would be something like 192.168.1. #)

  I prefer not to use a fixed IP address, unless it is strongly recommended.

  I don't know if the network card somehow got fried, but am willing to thow it in the trash.  I send you this note as my last effort to save the printer.

  Thanks a lot for your help.

  Thank you for all your help.  I did a complete reset (factory settings) everything from my modem routers and switches and reset the printer (#9) to the factory settings.  It worked.

  I appreciate all the help and follow up on my problem.

• Printer HP C4795 unrecognized by the network

  I have a printer HP C4795 wireless for 2 years.  It worked fine until recently.  It is no longer recognized on my network.  I made no changes to the network in the last 6 months.

  Some other points

  -When I use the USB port to connect the printer directly to the computer, it does not recognize the printer.

  -Wireless Network Test fails repeatedly.  The printer can't find my Home Network.  I have installed and run the program HP Network Diagnostics.  It cannot detect the HP printer.

  -The Diagnostics Summary says the wireless is on and works wireless.  Also, when I do a network scan, HPsetup is recognized.

  -J' unplugged the router for 30 seconds and then turned back on.  No luck.

  -Test report on the summary section of the network configuration, it indicates a network name different than the one I am trying to connect to.  I've never heard of this denomination of network contained in the summary of configuration.

  -J' have turned the printer on and off several times.  The blue light is always on.

  -I know that my network is OK.  I have 6 other devices on the network works fine, including 3 PC, a Mac, a Wii and a device of BluRay.

  OK, using the CD that comes with it, enter the configuration of the router and first check to see that it has the latest firmware.

  In addition, while you are in it make sure that 802.11 g is enabled (this printer is not a 802.11n radio), that MAC filtering is disabled and that you broadcast your network name (SSID).

• Installed at El Capitan and now HP printer does not work via the network

  Installed at El Capitan and now HP printer does not work via wireless network

  Open system preferences > printers and Scanners and select the print tab.

  Then the right or control click on the HP printer on the left then click: reset the printing system

• How can I get to the screen to insert the DNS settings? Printer continues to fall from the network

  Windows 7

  Photosmart 6520

  How can I get to the screen to insert the DNS settings? Wireless network printer continues to fall.

  The screen to manually set the DNS and IP parameters is in the SAP, or shipped to the printer Web server.  To access this page, it will take the IP address of the printer.  This information is found by pressing the icon on the front of the Photosmart 6520 wireless.

  Once again, we have the IP address, and then they could type this information in the address bar of their favorite browser.

  On another thread, you have mentioned the difficulties getting to the Web integrated printer server.  It is possible that the printer has a valid IP address, but still has no "communication" with the router.  Have you tried to enter the menu of the 6520 wireless and default network selection.  After having done that, then we can re - run the Wireless Setup Wizard in the wireless menu to reconnect the printer to the network.

  With this new valid IP address, you can access SAP of the printer?  In addition, make sure that the printer and the PC are connected to the same network access point.  Let me know how it goes.

• printer is not visible on the network

  I have traveled, but could not find anything that matched my problem.

  Here's my problem:

  The HP LaserJet 5200 dtn and PC are both connected to the router through an ethernet cable.
  A configuration page have been print the printer successfully with it's statement of Control Panel
  
  When you install the software, I adapted the printer name and IP address based on this configuration page.
  Always the printer cannot print or be seen from the PC.
  
  * Note: this problem happened ONLY after I formatted my hard drive.

  Problem solved.

  The reason is that the IP address of the printer is attached to 192.168.2.20 while my router is 192.168.1.1.

  So after I changed the IP of the printer 192.168.1.20, it works.

• Can no longer see the network icon in the notification area...

  OK, if one day I had an update alert Active on the lower right corner of my screen of my laptop. It was to download the new version of AIM-we said that your update is available, or something like that. I clicked on 'Install now' and went through the process with the GOAL. When I arrived at the end of the process, he said that everything was installed and I'm ready to go. Then when I restarted my computer, nothing has changed in GOAL it was always exactly the same as it was before I tried to install the software and my Internet connection / network connection icon is missing from the notification area next to where the time is displayed.

  I searched and searched through my computer trying to turn it back on right click on the bar tasks then go to the menu to set the network connection icon to 'active' again, but he wasn't there. I have no idea how to do to reactivate it, and I need in my notification area because I would like to know when and what network I'm connected to. I need help! Any help is greatly appreciated.

  Thank you
  Beth

  Hello

  How to enable or disable the Notification area system icons in Vista
  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html Rob - bicycle - Mark Twain said it is good.

• HP deskjet 5550 printer will print is no longer on the domestic network/work group

  I have a printer deskjet 5550 HP. It is attached through my XP operating system. My laptop is using Vista and has always been able to use this printer through the share system. However, all of a sudden the printer does not read the laptop print requests. I am able to access all other files on the main desktop. So I'm not sure what is happening. Does anyone have any suggestions?

  Hi sweetmyranda,

  1. you remember changes to the computer before the show?

  You can remove the printer in Windows Vista and then try to uninstall all the drivers for the printers of programs and features.

  Method 1:

  a. open Printers by clicking the Start button, clicking Control Panel, hardware and sound and then click Printers.

  b. right-click on the printer you want to remove, and then click on remove.

  If you can't delete the printer, right-click again, click Run as administrator, and then click on remove. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Method 2:

  Uninstall the printer from programs and features (as applicable).

  a. click on start

  b. type appwiz.cpl in search, and then press ENTER.

  c. find the printer driver package, right click and uninstall the package.

  d. restart the computer and check.

  Also check out the link:

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.