e9280t restart of Eve

Similar Questions

• 32AV933G - switch on the problems

  It works TV normally start from standby mode, but after maybe 30 minutes of operation and then put it to sleep.

  During the restart of Eve forward LED lights green but TV refuses to lights
  5v standby is still present the SMPS and map main during this period.
  You suspect the failure of main microprocessor Board?
  Any ideas please?

  All electrolytic caps have been changed in the diet.

  Please don t get me wrong, but I think that this is the case for service of Toshiba. I mean, you know that there are not many possibilities that any owner of TV can do. You can just update firmware, play with the settings and that s.

  In my opinion, you should contact the nearest Toshiba service provider, explain the situation and ask for help.

• Internal keyboard and mouse do not randomly respond time forcing me to restart my laptop 15 times until it works again

  1. sometimes this feedback haptic on the mouse is not triggered, leaving me by clicking on the mouse, while feeling against nature - something that is not supposed to happen

  2. after I close my laptop / closing of the lid/Eve (do not turn it off) the keyboard and the mouse literally don't work - it forces me to restart my laptop several times (sometimes around 15, take me 5-10 minutes just to get my laptop to work)

  Additional details:

  -J' tested a USB keyboard and mouse with my laptop and it works perfectly, even when the internal don't - maybe it's a hardware problem?

  -I went to the apple store a few weeks ago and spoke to someone at the "Genius Bar," which really helped at all - he told me I have to restart my laptop every time I open and I should do another user account - although I was skeptical about the logic used to arrive at these "solutions" I tried them anyway , here we are with the same problem - also, I don't have to close my laptop down 15 times every time I want to use, it's ridiculous, and that's why I bought a mac rather than a pc.

  -I'm not running any software/battery intensive programs on my laptop - especially just the word and the Google Chrome, which is not a lot

  -Here is a link to a video I downloaded from google reader showing how ridiculous, it's... https://drive.Google.com/open?ID=0B4oQ4C8NCLcWTWo5aVlrbDE1QmM

  Questions

  -I don't think that a fix is quite likely, but any suggestions are welcome!

  -Can I bring to the apple store and require a replacement? I left two years of care of apple

  This is probably in the wrong category, I apologize in advance - but it is a really weird problem that I don't think has a solution. Nevertheless, thank you for the reading of my rants and seizure of your advice!

  One thing that causes the mouse further trolling, is if your CPU is completely consumed by something. This can be checked in activity monitor CPU (all processes).

  Two other things can keep your Mac to be properly adjusted:

  GPU is suspended. These are cases where the GPU is no longer and can usually be seen in the console log, with symptoms such as GPU hang or WindowServer does not.

  Disk crashes.

  For the rotation of the discs, this can be a sign of imminent death of player.

  For SSDS of spare parts, this can be caused by the accumulation of deleted blocks, used in activating do not trim for your third-party SSD drive.

  -------

  The reason of suggests that you create a new user id is as a check against the clogging of a particular userid with junk that keeps things from being reactive. [a new user id will not have it clutter accumulated, so can react differently. He is not really a solution, it's a diagnosis.]

• Satego X 200 - 21U - after Eve: fan at maximum speed

  Hello

  I have a Toshiba Satego x 200 - 21u.
  I often use the mode "Eve". I close the screen with a wink, and the next day I still.
  Sometimes the fan goes crazy. It runs with maximum speed, as if it was too hot.
  When I stopped (no restart) and turn it on again, everything is fine.

  Is there a problem with a driver?
  Is it lack of Microsoft?
  Or is it really too hot? Y at - it a tool that shows me the temperatures?

  Thx for reading!

  Good day

  pAT

  You close the Notepad application with open or closed?
  This occurs if you close all applications before you use mode 'sleep'?

  When you write sometimes it is not easy to say why this is happening.
  Do some tests and try to find out when this happen.

• I was at step 1 for 20 hours, should I stop and restart or is this normal

  He will lose the progress she has made or is this not Marie-Eve progress and I have to restart?

  Hello

  It would seem that the matching process has stalled. You must restart - you shouldn't lose progress. While it may restart from the beginning, to remember previous progress.

  Jim

• Power saving mode stops my PC after a few minutes of play Eve, an online game. How can I fix this?

  Power save comes into play after a few minutes of play Eve, an online game.   I then have to manually turn off the PC before it can be restarted.  I adjusted the power settings on the PC and it happens to sleep.  I contacted Dell and downloaded a difficulty that has not worked.  I have a question pending for Eve support staff, but thought that I can get a fix here.

  Check power Panel ctrl if win xp, and together turn it off hard drive option never, you can also disable the screen saver, disable standby of the system or in Hibernate besides.

• restart of the computer from standby when I press start on the system unit, but not when a scheduled task is started

  Windows XP Professional SP3, updates, motherboard Asus P4P800 series (2006). The original system dates back to 2002, but there have been many additions and replacement upgrade. More recently, 2011, two old hard drives have been replaced (XP had destroyed itself requiring a reinstallation), with a much larger and HD, and the cpu has been replaced by a 3 GHz one.

  I've configured the BIOS to enable the use of standby mode (standby). I wanted to be able to run scheduled backup jobs early in the morning, a little before I wake up normally. The goal was to conserve energy. Whenever I leave the computer for more than an hour or two, I put it in sleep mode. In recent years, that it worked well.

  Scheduled tasks are still, in fact, more surely than ever. But now, when I press the Start button on the system unit, the operating system is restarted rather than restore the State of the system at the time of Eve. This happened almost constantly for maybe a week. I was always a guard never enter sleep mode when I'm aware of any application running who has not completed a requested operation (save a file, defragment a disk, etc.).

  I searched on the basis of knowledge, but not found any problems like that. There has been no hardware changes, no new devices; only change of important software (but it is difficult to see how it might be relevant) was the resettlement of Java Runtime Environment 6.x to support the help of OpenOffice. Although I have not checked, I am reasonably sure that all drivers are up-to-date.

  No idea why this should suddenly become a problem or how to fix?

  Hello

  I suggest you follow these methods and check.

  Method 1: View the steps suggested in the following link.

  How to solve the problems of hibernation and standby in Windows XP

  http://support.Microsoft.com/kb/907477

  Method 2: Use the Powercfg.exe utility to restore the default power mode

  You can use the Powercfg.exe utility to copy the power mode of the user by default to the currently logged user profile. You can do this because eating patterns are only related to individual user accounts. To copy the default user schema using the Powercfg.exe utility, follow these steps:

  1. click on Start, click run, type cmdand then click OK.

  2. at the command prompt, type the following command and press ENTER:
  powercfg /RestoreDefaultPolicies

  Method 3: How to perform the check and clean boot if the problem persists.

  http://support.Microsoft.com/kb/310353

  NOTE: Once you check the functionality, follow the suggestions under steps to configure Windows to use a Normal startup state.

  I hope this helps!

• Pavilion 17-F001dx: my laptop backlight is something really weird + hang on restart/shutdown

  This laptop is by far (on paper) more powerful than my previous E1 AMD processor powered notebook; but since I got it (it is refurbished, but in the warantey of 90 days as I've had it less than 2 weeks) it was much less responsive than my laptop prior. I get weird popups as follows:

  

  And even the tabs in internet explore crashing and reloading for the basic sites like the google home page.

  Every time I restart there are several applications, I've never seen on my laptop prior "prevents me to restart"; including just a file Explorer window and there are always abnormally slow restart and shutdown. He also takes his sweet time of mode "Eve".

  And earlier, my screen faded very bright and blinking then black a few times. For now, I fixed it to the maximum brightness and it looks like a medium brightness. It is after the restart after this strange behavior out of the blue backlight.

  BIOS version: F.33-11/21/2014

  @Quintix256 ,

  Hello and thanks for the display on the HP support forums.  If you are having a hardware problem question and system performance of a refurbishment purchased from a third-party supplier 3rd unit.  Although it is under warranty I would contact HP support by phone for repair options.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  If this is not the case, contact the supplier for replacement options.

  Thanks again for posting and have a great day.

• restarts repeatedly

  Restart the system after start. Saves the settings, deadline.  It has a picture of Eve or desktop screen but no icons and no bar start-up.  It closes very quickly. F8, known last good configuration and safe mode does not work. You press '0' for Toshiba rebooting, no luck.  Don't have a CD to reboot. any ideas?

  Because he cannot start in safe mode, your only option is to call Toshiba support or your local PC support specialist.

  In the meantime, you can try to boot from a WinPE/BartPE CD to recover your files.

• My pc will not boot mode "Eve". black screen, reboot reboot safe mode then anouther and all is well.

  Turning on my PC after the mode 'sleep' or when it was completely off my PC does not start until... White screen.  If I reboot and select Safe mode it loads. If I can restart in safe mode, and then it starts and everything works.

  I tried a lot of bugs, power, the settings of the mouse settings, and cd to repair vista, reformat and clean install and I still have this problem

  My recent attempts to fix it have wondered if this might be a problem with my USB drivers. My mouse is USB and when I boot I hear the sound that plays when I plug in our remove something from one of my USB connectors. just a quess.

  Any help would be appreciated.

  Thank you

  Dave

  My pc = Windows vista service pack 2

  MB = Gigabyte p35-s3g x 64-based pc

  Is Intel (r) Core (TM) 2 Duo CPU E8400 @3. 00 GHz

  = ram 4 GB

  ATI Radeon HD 4870 1 concert =

  = X Fi Xtreme Gamer Sound blaster Creative

  Hi Dave,.

  You can try to disconnect all external devices, including network card and put the computer in mode "Eve" and check if it comes back.

  You can also try to update the graphics card and check if it helps

  http://www.AMD.com/us/products/desktop/graphics/ATI-Radeon-HD-4000/pages/ATI-Radeon-HD-4000-series.aspx

  http://support.AMD.com/us/psearch/pages/psearch.aspx?type=2.4.1&product=2.4.1.3.36.3.6&ContentType=KB+article&OSType=&keywords=&items=20

  Also check out the link:

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

• Programs can not be started, or no response after the computer was not awake mode "Eve"

  Dear Sir.

  My lap top is under the VISTA system. Now the problem is that all programs can not be started or no response after the computer was not awake mode "Eve". I have to restart the computer to recover the computer to normal state.

  Please please let me have your advice to return to my email address: * email address is removed from the privacy *.

  Thank you very much!

  Eric

  Hi Eric,.

  You can follow these steps:

  Step 1: perform a clean boot to verify if an application or service is causing the problem.

  See this article for more information on the clean boot:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
   http://support.Microsoft.com/kb/929135

  Steps to perform a clean boot:
  a. click the ORB start on your desktop
  b. type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  c. in the general tab, click Selective startup.
  d. under Selective startup, clear the check box load startup items.
  e. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
  f. click OK.
  g. When prompted, click on restart.

  NOTE: Please check that you start the computer in normal mode after a repair. Follow step 7 article.

  Step 2: Configure the power settings for keyboard, mouse, and other devices.

  a. Click Start, click Control Panel, hardware and sound, and then click keyboard.
  b. click on the Hardware tab, and then click the properties button.
  c. click Change settings.
  d. click the power management tab and verify that the allow this device to wake the computer is selected.
  e. If "Allow this device to wake the computer" was not selected, select it and click OK.
  Follow the same steps for the mouse as well.

  If the problem persists, disconnect all non-essential devices (printers, scanners, USB drives). Restart the computer with only the original mouse, monitor, and
  connected keyboard. If this solves the problem of sleep/wake, one of the devices was causing the problem. Replace a device at a time and test to see if the
  problem occurs again. Continue adding devices and testing until you find the device that causes the problem.

  Refer to this article for additional troubleshooting steps.

  
  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista:
  http://support.Microsoft.com/kb/950686

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pavilion e9280t: the graphics card upgrade

  I had to spend my original GeForce GT220 graphics card to use at least three 3 monitors so I bought EVGA GeForce GT 640.  When I installed the card, everything was fine until the computer, install the driver and start then computer began to stop and start several times and then stopped at c prompt and siad it is impossible to find a bootable.  Long story short, I had to use my emergency disk and restart the computer.

  Then, I started reading Blogs about the HP graphics card chain and one of technology pointed out I should buy Nvidia GeForce GTX 660 and this card will work without upgrading PSU, so I did.  Now, with the GTX 660 computer card keep start and stop and I can't seem to stop.  I spoke with a few outside tech and they said that I need to improve my diet.  If this is the case, then the HP expertise technology was not entirely accurate or I have another problem.

  The UPE recommended are: (1) Corsair HX650 and (2) RS-650.  I also read that this MB Pegatron IPMTB-TK does not many power supplies above 550-650 watts.

  Can someone tell me what is my computer problem?  Need to pass the power supply and if I do what PSU I can use?  Model and Type to fit properly in the case?

  HP Pavilion e9280t Truckee-UL8E

  Chipset: Intel X 58 Express

  Original power output power: 460 Watt

  Hello

  The differences between the reference models and variants will vary according to the manufacturer.  See the image below and notice number 6 power connectors that are necessary.  Depending on the configuration of your PC, a GTX 660 can't get enough power to the 460 watt power supply in your PC. As I said earlier, I didn't have a question of power using the EVGA GTX 660.  Graphics NVIDIA GTX 660 cards are border line with some power supplies according to the design of the PSU and the loading PC.

  The Corsair CX500, or CX600 would be excellent choices. Note: the power supply fan is mounted upward toward the top of the Cabinet because it will shoot in the air fresh from along the edge of the top side entries.

  

• My mouse no longer works 2 days ago... I restored my pc on the eve, it works... but that did not help my mouse. This mouse works on another pc... I am getting error usb? I removed & charged all under the usb tab__

  My mouse no longer works 2 days ago... I restored my pc on the eve, it works... but that did not help my mouse.   This mouse works on another pc... I am getting error usb?  I removed & charged all the usb tab

  Hello

  You may need assistance from a real store tech computer (no leeks and glances at a BestBuy or)
  other BigBox stores) or the manufacturer of your system Support.

  What is the error of USB?

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Please make these now even though you might have tried this before:

  Remove the mouse if indicated in the Manager of devices - devices of score - click right on - UNINSTALL.

  Then lets refresh the USB stack

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• 1034 error connection received on the eve - yes another

  Environment:

  Oracle 11.2.0.4 EE on Solaris

  I have 3 three databases primary on 3 three servers different each with a physical Standby on the backup site.

  They work very well together for several years.

  We had a major power outage in the primary datacenter yesterday and now my primary databases sending files to archive for standby databases.

  I get the above error message in the primary alerts log.

  I am able to "tnsping" of the primary on the eve and the day before at the elementary level in all cases.

  I recreated password files and copied to the standby server.

  I bounced the standby databases and restarted MRP.

  I am able to "connect sys / < password > @primary as sysdba" the previous day.

  When I try to do the same to the primary as ' connect sys / < password > @standby as sysdba "I get ' ORA-01017: name of user and password invalid;" denied login '

  Other suggestions are welcome!

  -gary

  ADMIN_RESTRICTIONS_APSMDMP1STBY = WE

  During the review, I saw the setting you put on standby and primary school as well. With this setting, there will be no changes/modifications will be accepted up to except if you reload the listener after having changed in the listener.ora file.

  I suggest you to reload or remove the setting for the time being to test.

  I asked you for all configured parameters in sqlnet.ora, so none of them available please paste here.

  Please confirm which is the service_name used in Oracle net service of Eve? have you returned? Because we follow the thread on earlier suggestions, but not from the beginning.

  Thank you.

• Impossible to analyze the eve: Please help

  Impossible to analyze the day before: / applications/adobe dreamweaver 2014.1/configuration/dialogs/eve/titanoptionaldialog.eve cc

  Help, please

  Hello

  Please, try the following:

  1. Force to leave Dreamweaver so its opening.
  2. Please go to/applications/adobe dreamweaver 2014.1/configuration/dialogs/eve cc location
  3. Take backup of the titanoptionaldialog.eve file and move it to the trash. Remove it from the trash as well.
  4. Restart the DW and check if it works.

  If that don't work then please uninstall and re-install Dreamweaver (also remove preferences) and then check.

  Concerning

  Vivek