EA6700 gel / disconnects randomly

Hi all

I recently bought the Linksys EA6700, because my Linksys E1000 wifi signal did not cover the whole House. Unfortunately the EA6700 was not yet able to give me a complete coverage, probably because there are a lot of walls that the signal must pass through, so I decided to use the E1000 to extend the signal of EA6700.

All connections work properly except for an annoying bug which causes both the Wi - Fi signal and disconnects for a few seconds. I can reproduce this disconnect when I do a network scan on my Tablet google nexus. Sometimes it seems just random and at different intervals.

I also feel that it's somehow triggered by the combination of wired connections & wireless or even the number of connections I was able to watch a full movie and the hickups yesterday began when I used my Tablet nexus. This could be a coincidence of course.

No one else has encountered a similar problem with this device or in another configuration maybe?

Here are some of my current setup.

  1. ISP wireless modem is placed in the basement. I disabled the wireless signal is, so he cannot interfere with the signals of linksys. A DMZ for the EA6700 was the installation because I needed an external access to my NAS device.
  2. Wireless modem is connected to a switch in our living room that gives the signal for our digital camera to the tv and to the EA6700 router. The IP address for the router and digital tv are managed by DHCP from the ISP.
  3. The EA6700 is connected to my smart TV, home theater and media player AC Ryan and was also in our basement where another switch. The IP address of all these devices is managed by the DHCP EA6700. A DMZ on my NAS is also handled here. The wireless signal uses 11 channels & 48 as suggested on another forum. I also updated the UMT manually 1472, which was the largest packet size that he could manage. Because I had some problems to reach my NAS device remotely I temporary disabled the firewall here.
  4. The last switch in my network is connected to a NAS, my computer and router E1000.
  5. The router E1000 disabled the DHCP & NAT and used the same SSID & credentials as the EA6700 to obtain a seamless wifi signal. I also disabled the firewall here and setting up channels for the WiFi at 4 & 64, so it doesn't interfere with the signal from the EA6700.

Hello

Since the EA6700 has a dual-band feature, you can try to create a different SSID for the band of 2.4 Ghz and 5.0 Ghz. After you have created it, observe the connection. If it's always the same problem, try to disable SimpleTap. Access your router configuration page then go to Wireless -> SimpleTap -> Turn OFF SimpleTap.

Tags: Linksys Routers

Similar Questions

  • External drive USB disconnects randomly

    Hello

    I use a Mac mini as a server and include two OWC MiniStacks in annex. The Ministacks are connected via USB3 and underneath the Mac mini. The Ministack in the Middle started disconnecting randomly and I have to turn off and on to get it connected.

    The Mac mini is always on and I use the disks USB as server provided the network disks.

    I have Seagate Enterprise drives in the world.

    I get the following output in the Console:

    22/08/16 19:08:19, 000 core [0] USB device 1E91B0B114700000 - reset BOT finished with kIOReturnTimeout.

    22/08/16 19:08:19, 000 core [0] USB device 1E91B0B114700000 - will be reset to zero.

    22/08/16 19:08:20, 000 core [0] 1533181.822274 PRT7@14700000: AppleUSB30XHCIPort::resetAndCreateDevice: could not create the device after tests (1), disabling port

    22/08/16 19:08:21, 000 core [0] USB device 1E91B0B114700000 - fConsecutiveResetCount = 1.

    22/08/16 19:08:21, 000 core [0] disk3s2: device / channel is not attached.

    22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

    22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

    22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

    22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

    22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

    22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

    22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

    22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

    22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

    22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

    22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

    22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

    22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

    22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

    22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

    ...

    22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

    22/08/16 19:08:21, 000 core [0] hfs: err 6 reading VH blk (air = 2 database SERVER)

    22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

    22/08/16 19:08:21, 000 core [0] hfs: err 6 reading VH blk (air = 2 database SERVER)

    22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

    ...

    22/08/16 19:08:22, 000 core [0] hfs: err 6 reading VH blk (air = 2 database SERVER)

    22/08/16 19:08:22, 000 core [0] hfs: disassemble initiated on SERVER 2 DATA on the device disk3s2

    22/08/16 19:08:22, 000 core [0] disk3s2: media is prΘsent.

    22/08/16 19:08:22, 000 core [0] hfs: err 6 reading VH blk (air = 2 database SERVER)

    22/08/16 19:08:22, 000 core [0] disk3s2: media is prΘsent.

    22/08/16 19:08:22, 000 core [0] hfs: err 6 reading VH blk (air = 2 database SERVER)

    22/08/16 19:08:22, 000 core [0] disk3s2: media is prΘsent.

    22/08/16 19:08:22, 000 core [0] jnl: disk3s2: do_jnl_io: strategy err 0 x 6

    22/08/16 19:08:22, 000 core [0] jnl: disk3s2: write_journal_header: error writing to the journal header!

    22/08/16 19:08:22, recorder disc 775 fseventsd [61]: failed to open the output file DATA Volumes/SERVER 2/.fseventsd/00000000088fc0e6 (no such file or directory). Mount point/Volumes/2/.fseventsd database SERVER

    22/08/16 19:08:22, 776 disc fseventsd recorder [61]: failed to open the output file DATA Volumes/SERVER 2/.fseventsd/00000000088fc0e6 (no such file or directory). Mount point/Volumes/2/.fseventsd database SERVER

    22/08/16 19:08:23, 085 deleted [695] normalizeUserMountpoint:791 volRoot failed for SERVER/Volumes of DATA 2

    22/08/16 19:08:23, 085 deleted [695] _validateVolume:813 unable to normalize the volume: ' / SERVER/Volumes of DATA 2 ", flight: (null)

    22/08/16 19:08:26, certadmin 148 [97828] connected to the notification Service

    What is going on?

    HARD drive fault?

    Not pregnant?

    Damn Mac mini?

    I thank very you much in advance!

    He could be sleeping?

    Could it be overheating?

    Have you tried swapping the cables yet?

  • Mouse Bluetooth disconnects randomly the macbook pro

    So, I have a logitech bluetooth mouse (M535) and sometimes it disconnect random for my mac and then reconnect a few moments later... Is there a reason that this is happening, or is it possible to fix it?

    Bluetooth devices no longer meet

    Sources of interference Bluetooth

    Sources of interference of Bluetooth (2)

    Problems of Bluetooth wireless

    If your Wi - Fi connection is able to generate a 5 GHz signal, try this.

    Restart your computer, hold down the option/alt - P - R keys command before the gray screen appears. Continue until you hear the startup chime for the second time.

    Reset the NVRAM EXTRA memory

  • Wireless network problem: disconnects randomly anywhere between 1 and 4 hours.

    I have a wireless network problem, it disconnects randomly anywhere between 1 h and 4 h. The network consists of a Samsung 4 G hotspot and a Linksys AE1000. The signal strength is excellent, the AE1000 is 1 ft of the computer and 1 ft of the HotSpot.  The computer is a Dell Dimension 2400. Any ideas?

    Hi Jack,

    Problem solved.  I did 2 assumptions about the original problem.  I assumed that the 2 Tech that I spoke made the hurt their product. Battery saver has been activated on the hotspot.

    Thanks again

    Greg

  • Program to disconnect randomly with SonicWall

    Hello

    We have a chat program called HUD that belongs to our Trixbox phone server. After the passage of a Zywall Firewall in 215 SonicWall, the program disconnects randomly every 30 seconds to 2 minutes at different intervals for all users. This affects users within our network, but not outside.

    The program uses a TCP port that is transmitted WAN > LAN pointing to the server.

    We also tried adding QOS to the firewall rule for nothing doesn't. We have also tried to add a LAN > WAN, all in all, with QOS and that did not help.

    If we move to our old router, everything is fine.

    Any ideas what could cause this?

    Hello

    In fact, we have fixed it. We simply removed and read via the Server Assistant and he began to work for some reason any.

    Thank you
    Ben

  • The mouse continues to disconnect randomly

    span / / p
    With the help of OS Vist, my husbands mouse continues to disconnect randomly.  He has reinstalled the drivers, did the computer repair.  He changed the mouse to a new with the same result.  It has also changed the cables autour and she always does on other ports.  It seems to be a problem with OS rather than material.

    Problem solved (for me). Resolution-Wrecked TWO mice! Bought again the machine and we like that. I will never use two mouse at the new!

    Question answer.
    Operating system: Win7. (Even if the previous user, the question was under Vista).
    Question started: yesterday. 23 / Feb / 2010.

    Hello, my name is Royce, I have a problem with my mouse on Windows 7.

    Question: The mouse turns off randomly, I hear the device disconnect sound, then the sound of connection device. It disconnects all all three to six seconds, and the mouse power light turns off during this disconnect. I suspect my internal USB Hub is powered off, but do not.

    Cause: I had two mouse plugged in at the same time, so a friend can have control of the screen with me. In a few minutes, this problem started.

    Tried to fix it: I uninstalled the mouse driver, tried different ports, updated windows, different mice, taken the battery out of the motherboard, reset the bios and even entered in DeviceManager and ensured that all usb hubs do NOT go to power saving mode. I don't know what else to try, but then again I'm not all that known with Win7.

    When you first start my PC, the mouse will be OK for about 20 seconds, then the problem is getting worse and worse. If I don't move my mouse, I don't hear the disconnect sound, but it is perhaps more than that.

    When the mouse goes off, I think I can use my keyboard. The CapsLock light is wrong, so I suspect that the keyboard does not meet this problem. Oh, and all of my devices are USB2, so it's all modern. My PC is new, built the House. It's a machine fast quad core with a lot of power to the usb2.

    Help, please!
    Royce Barber

  • NETWORK DISCONNECTS RANDOMLY, I READ EVERYTHING HERE AND NOTHING WORKS, PLEASE HELP ME! :(

    Lenovo G510
    Intel core i5 - 4210M
    Windows 7 ultimate
    Broadcom 802.11n network adapter

    For almost a month I had problems with my laptop because it disconnects randomly the system for some reason, I can't identify.
    It can operate correctly for one hour, then disconnects the wireless network card. Every now and then, or every 10 minutes, depends on the day I guess.
    I had a lot of reading the forums on this topic and found nothing to work up to now
    That's what I tried:
    -everything is on maximum performance
    decliques-i 'allow the computer to turn off this device to save power ".
    -disabled some 'ip helper' in services
    -check all that relates to the router (change channels, interference with other routers or wifi), the hardware part SEEMS very well (the laptop is fairly new, it's like a year and never had any problems with it)
    -verification of updates of drivers, it says I have the latest version
    -fully scanned the laptop for viruses and none has been detected
    n ' install any programs lately that could cause this
    -network, signall is excellent

    And still nothing worked. NOTHING. I'm really desperate now. The only thing that makes the network working again almost instantly (like5-10 sec then that if I let him restart itself it takes 2 minutes for even 30-40 minutes), turn and turn again on the wireless network card (I have it by pressing the airplane mode)
    If no help pleaseeee? I noticed that it happens to many other users also.

    If the steps we have provided above has not resolved the problem with intermittent wireless connectivity, then what Canadian technology said, it is likely that the problem lies in the material.

    Intermittent wireless connectivity are often caused by loose or defective air intakes to the wireless card, or a faulty card as well. This is the reason why Canadian Tech informed on the use of an external USB wireless device.

    Another option is to contact the manufacturer of your device, which is Lenovo, for repair options based on security they provide. You can contact them via this link.

  • Internet disconnects randomly

    OK to give a little history, I've been playing around with the system setting I wasn't suppost to (mac address settings) and my problem started shortly after I did. any ideas? It will connect for a good hour, auto disconnect reconnect and has no internet access to about 15 minutes then has access to the internet

    Hi taylor1210,

    Welcome to the Microsoft community. According to the description of the problem your connection Internet disconnects randomly. Provide the following information:

    ·         You get the error message?

    ·         You use a third-party security software?

    I'll help you with this problem. I suggest you follow these methods.

    Follow these methods.

    Method 1: Temporarily disable the security software .

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2:

    I suggest you to reset the TCP\IP stack and see that if this is useful, the following steps will help you reset the TCP\IP stack.
    1. to open a command prompt, click Start , and then click run. Copy and paste (or type) that follows the command in the Open box, and then press ENTER:
    cmd
    2. at the command prompt, copy and paste (or type) the following command and then press ENTER:
    netsh int ip reset c:\resetlog.txt
    Note If you do not specify a path of the directory for the log file, use the following command:
    netsh int ip reset resetlog.txt
    3. restart the computer.

    See also:

    Why can't I connect to the Internet?

    Windows wireless and wired network connection problems

    I hope this helps. Let us know if you need help with Windows related issues. We will be happy to help you.

  • My toshiba satellite is now gel up randomly from the recent installation of windows 8.1!

    * Original title: freeze

    My toshiba satellite is now gel up randomly from the recent installation of windows 8.1!

    Seems to happen, especially when streaming movies but when to check email or whatever.

    It should stop when it happens because keyboard function used.

    What can I do to fix?

    Hello

    See if this helps you improve performance.

    Search for malicious software with the FREE version of this program.

    And does not accept the option "Pay for the version" trial installation

    Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

    http://www.Malwarebytes.org/products/malwarebytes_free

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    You can clean your hard drive using these two methods.

    "Delete files using Disk Cleanup"

    http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-8

    Using the free CCleaner program:

    http://www.Piriform.com/CCleaner

    In NO case use the registry cleaning Option in CCleaner

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    Make sure you have the latest updated drivers:

    Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    "How to optimize the performance of Windows 8 and 8.1" . "

    http://www.eightforums.com/tutorials/37511-optimize-performance-Windows-8-a.html

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    Worth the read as:

    "How to optimize Windows 8.1 for a desktop PC.

    http://www.howtogeek.com/167013/how-to-optimize-Windows-8.1-for-a-desktop-PC/

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    " " Performance & maintenance"

    http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    And I would check to see if it has damaged system files.

    Each method/step below progresses to another if the first does not all corrupted files which are, etc..

    «Use the System File Checker tool to repair missing or corrupted system files»

    https://support.Microsoft.com/en-us/KB/929833

    _________________________________________________

    And these eightforums.com tutorials are very detailed for the problems resulting from Scan SFC:

    "How to run the command" SFC/scannow"at the start or in Windows 8 and 8.1" . "

    http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html

    Read it in conjunction with the rest of the information they give link above.

    Note

    If SFC could not fix something, then run the new command to see if it can be able to next time. Sometimes, it can take by running the sfc/scannow command 3 times restart the PC after each time completely fix everything what he is capable of.

    If this isn't the case, then run Dism/online/Cleanup-Image /RestoreHealth to repair any corruption component store, restart the PC later and try the sfc/scannow command.

    If still no, then try using ONE OPTION above to run the command sfc/scannow at the start

    If still no, then you could do a Refresh of Windows 8, or run a System Restore using a restore point dated before the wrong file occurred to fix. You may need to repeat doing a restore of the system until you find a restore point that is older that may work.

    If not yet, then you can use the steps in the TIP box in the section THREE OPTION to manually replace the files SFC could not fix.

    See you soon.

  • Laptop disconnects randomly wifi, Windows 8 problem?

    Whenever I use my cell phone it disconnects randomly my wifi, it happened to someone else?

    Whenever I use my cell phone it disconnects randomly my wifi, it happened to someone else?

    Hello

    Check the following settings.

    1. press the Windows key + X to display the system menu, and then click Control Panel.

    2 open the Device Manager and expand network adapters.

    3. right click the installed card and select Properties.

    4. click on the power management tab.

    5. If there is a check mark in the allow the computer to turn off this device to save power, the option to Remove the check mark, and click OK.

    The results of the tests.

    Tell us what you find.

    Concerning

  • Satellite L disconnects randomly WiFi

    My laptop keeps randomly disconnecting from wireless network even if the network has not ceased to issue.

    After what happened, often the laptop will pick up the fact that there are wireless networks but refuses to connect.
    The only way to solve the problem is to restart the laptop, then go through the repair process by ' + * wireless connections * +' where it says then I need to ' * + turn on wireless capability + *' which seems to have broken, even if I deviated _not the switch_ wireless, so it remains in the position we.

    Is there anything I can do to fix this problem without having to restart, because it becomes painful.

    I'd appreciate any help as I start to go slowly insane! Thank you! :)

    Hello

    In most cases these WLan problems can be solved by WLan driver update.
    I can't find an info if you have already tried these updates so I recommend this review in your ad

    http://APS2.toshiba-tro.de/WLAN/

    Alternatively, you can try to disable management feature in Win 7 WLan power supply management.
    The point is that Wlan connection could interrupt because of this energy savings helps extend the battery working but affects the performance of Wlan.

  • WiFi disconnects randomly on Satellite A210

    I have a new satellite A210 with realtek inside wireless adapter. Everything works well except the wifi. It shuts down suddenly and random.

    Sometimes I can use it for hours and nothing happenes, but when I phone or reciving large files via Wifi it usually disconnects after a few minutes.
    I installed the latest drivers and bios and I know the router works well because my other laptop works perfectly. IM close to the router, and I don't have near wireless phone.

    I have tried many things, related to the AC or unplugged, with antivirus and whitout.
    If anyone can help me I would appreciate it a lot.

    Spartan Hello

    Which operating system you are using? Already preinstalled Vista or maybe WXP?

  • ReadyNASOS 6.4.0 - T136 (beta 4) - network actions disconnect randomly

    After you have installed the latest beta version of ReadyNAS (T136) my network shares are randomly falling sporadically.

    Model: ReadyNAS 102

    SW: 6.4.0 T136 Beta 4

    Network connection: CAT6 Ethernet

    -Tired of changing the cables, always randomly disconnects

    -Tired another port on the router, always randomly disconnects

    Protocol: AFP

    Any suggestions? I'd be happy to send the log files. I am not versed in the Netgear ReadyNAS log files, so I haven't looked at them.

    Which firmware you would update go?

    What version of Mac OS X you are running?

    Yes, send logs (see newspapers of sending a link in my signature).

  • ReadyNAS-102 (6.4.1) disconnects randomly

    Hi all

    Over a year ago I bought a NAS readyNAS-102 as replacement for my old configuration by using a media player with external drives. From the beginning I was very happy with the way everything worked, it was so good!

    I was able to access my files across using FTP, I could listen to my Samsung Smart TV and all devices (laptops, ipads, you call it) could access the database, I created.

    This has stopped recently. For some unknown reason my readyNAS-102 with firmware 6.4.1 randomly disconnects after a while to load. It doesn't matter if it is used TV, laptop or tablet.

    For example, when you watch a movie on the TV, the laptop or Tablet the device disconnects from the SIN after a random delay. This may be 3 or 30 minutes in the film. Strange thing is, it is not peripheral wide, so when the laptop is disconnected (I can't access it storage network or via static ip address) I can still access the NAS with my ipad.

    The same thing happens when you look at photos etc. I already tried several things but can't seem to find the missing piece of the puzzle.

    Perhaps people with more knowledge have a hunch where the problem may be.

    Kind regards

    Tomas

    I am pleased to announce that for the moment, the problem disappeared.

    I updated the firmware to the latest version beta 6.4.2 - T72 and tested by watching a movie.

    For 1 hour and 15 minutes the NAS has run smoothly so I am happy again.

    Thanks for the quick and clear answer y ' All!

  • Wireless disconnects randomly on my laptop.

    I have a Dell laptop purchased in 2006. He has XP with SP3. I have a wireless network set up at my house so that I can wireless internet access anywhere in it. When you use my laptop, sometimes, I'll be on a Web site and the following I try to go does not load, and then it will say that the page is not found because I lost the connection. At this point, I can disconnect from the network and then reconnect to it and the internet works perfectly until the next time that this happens. No other laptops or devices home lose the connection like this. I found some suggestions online to disable wireless zero, and I tried for a while. When I did this, at random times just as before, a different symbol wireless jump upward in the task bar (Intel ProWireless I think) telling me that she had lost the connection. With off WZ, I can't look for a network, so I can not disconnect and reconnect. A few minutes later, he will return to full power. This happens often and completely at random, as he has done before. There is another feature I should enable or disable? I have all kinds of specifications, but I don't know who to post. Help, please!

    Hello

    Go to the properties of the network card WIRED on the power management tab, uncheck the box "allow the computer to turn off this device to save power".

    The cause of this is the Wireless Zero Configuration (WZC) service. This feature, enabled by default in Windows XP Service Pack 3, is designed to optimize the use of wireless network technology in constantly looking for other wireless networks. This process has been known to cause clients to randomly drop their Wi - Fi connection. The best method to alleviate this problem is to use third party software to manage your wireless connection. This software will almost always receive with the driver for the wireless card you are using. Once you have this software installed, you want to disable the automatic configuration service to prevent it to load at startup.

    1. 'change advanced settings' in the wireless network connection dialog box
    2. in the tab "wireless", select the network and click Advanced.
    3. change a random setting
    4. click on OK and OK
    5. step 1 and 2 once again
    6. restore the random setting

    In addition, refer to this links:

    Random wireless network disconnect
    http://support.Microsoft.com/kb/910387/en-us

    Hope this helpful Information.

    Kind regards
    Tamim

Maybe you are looking for

  • Why do I get an email every time that I use my browser to access iCloud Info?

    whenever I use a browser to access iCloud, I get an email to tell me that this has happened since MY long held MacBookAir why is it happening?

  • Record of capture in logic ProX 10.2.1 joined automatically Midi regions that overlap

    Hello I recently installed logic X 10.2.1 and have a particular problem, I can't seem to find a preference or an Option for. I always use "Capture recording" to record my takes lunch. However, if I try to capture a record in a track on an existing Mi

  • network flow

    Hello I want to send periodically the data between a host and target in real time via the network stream. the types of data that is sent by the host are unfortunately not scalar, but rather: a cluster of enums, a group of elements different and two a

  • HP Recovery Manager freezes at 33% on laptop DV6

    HP Pavilion DV6235nr Windows Vista 32-bit I am running HP Recovery Manager to a set of recovery disks that I created.  The first phase, "Reformat the partition of your hard drive Windows" works without a hitch.  The second phase, 'Original content re

  • Need help understanding checksur results!

    I downloaded System Update Readiness Tool and looked at my results and he said that he found 8 errors and has listed them under "unavailable repair files." How can I fix it! Here are my results... Help, please! I use a windows vista Home premium sp2