Eargently neeed help!

Similar Questions

• SYSTEM RESTORE! NEEED HELP! All the restore points went :(

  I have an Acer Aspire 7730 running Windows Vista and I need help. An attempt to clear up space, I delete my restore points. I decided a few days later I want to restore to an earlier date; Guess who has no conservation is only 27 minutes ago! : D I need to know how to create a new set to ANY point in time restore point. Or at least when I first took it out of the box. Please help? : S

  You cannot use system restore to factory settings.

  And you can not create a Restore Point for yesterday today.

  Restore of yesterday point had to be made, so that you could come back today.

  You must use one of the methods below to return to the factory settings.

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  Contact Acer at the link above and ask them to send you a set of recovery Vista disc/s.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11, and Acer is normally Alt + F10 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Re: Satellite L855 - Intel Core i7 - AMD radeon 7670M - main graphic accidents

  Please please help me.

  I bought this laptop recently not even a month and it starts to become very lag sometimes.
  When you watch videos of random show and offset of the video color square, and all the computer crashes often showing only blue and white lines.

  A few minutes ago, the screen crashed, came back with black lines across my screen and half of the Office was stuck on the other side:)

  Also when playing games it shows the black squares on the screen.

  I have about 400 GB of files and downloaded movies if that can cause this, but who shouldn't because it's a 1 TERA hardrive.

  I tried everything: (!)

  NEEED help please! Please, I beg you! I don't want to use to send to manufacturers because who would take weeks :(

  Hmmmmm... It is not easy to say what the problem is here. Are you using the original pre-installed OS that you got with your laptop?

  Problem is that these questions are not easy to solve. Theoretically, you can either reinstall OS and check with the factory settings or try to check if the new display driver is available.
  Please visit the download page for Toshiba under http://www.toshiba.eu/innovation/download_drivers_bios.jsp and try to install the latest display driver. After this check if the same thing will happen again and, of course, send feedback.

• What does mean gfxui meen?

  When I start my computor the first thing that appears is 'Gfxui' is not running... I can't find what it is... I am computor illiterate and neeed help... can you gimmie so many options...

  Hello

  ·          What version of the operating system is running on the computer?

  Gfxui is part of the Intel graphics drivers. So please update your graphics card with the latest drivers for this problem.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• impossible to install window updates

  Please I neeed help
  I get the error message when I try to install the updates, but everything I tried didn't work. What should I do?
  first the window vista pack 2 was not installed sucsessfully and it blocks the rest available updates

  What are the error codes?

  Open Windows Update and review your history. Locate the update/s that have failed to install (to see the information on the update/s failed - double-click the update). Check each update, if it has error code 800f0826 then continue until you get a different error code. The update with the different error code is probably the one who caused the problem and will be fixed until you can get some other updates.

  Are there additional clues in Windows Update Log?

  %WINDIR%\WindowsUpdate.log (c:\windows\windows Update.log)

  or this log file-

  %windir%\Logs\CBS\CBS.log (recorded all events) (c:\windows\logs\cbs\cbs.log)

• Protect the Z10 bb blackBerry

  Hello, Iam new and have a big problem. My Z10 was not prpperly in working and made a wipebut of security is now asking me for a bb ID, which I do not or the password can be disabled the BBprotect and antithief on the phone by computer function somehow. Please I neeed help

  This is IMPORTANT: do not remove your BBID. Do not reset your BBID. You may well be in a situation where your device is useless unless you get the BBID. And if you remove the BBID while there might be no hope.

  See http://supportforums.blackberry.com/t5/BlackBerry-Device-software/How-to-regain-access-to-your-BBID/... for advice. But, repeat, DO NOT delete the current BBID.

  If you are unable to retrieve the BBID and you are locked out of the unit because of that, BlackBerry has stated that...

  If you purchased your appliance from ShopBlackBerry, Amazon (U.S. / UK) or the Porsche Design Store, please communicate with BlackBerry using the details on our page contact us.

  Contact us blackBerry > http://blck.by/1MxtqPR

  If you bought your device with a wireless service provider, or a retail store in person or online, please contact them for assistance and the State you experience problems with the anti-theft Protection in BlackBerry 10 OS 10.3.2.
   
  Overview of anti-theft Protection > http://blck.by/1Ethg83

  When you contact your point of sale, please have the following prepared;

  DO NOT PUBLISH THIS INFORMATION IN THESE FORUMS

  -Your BlackBerry ID
  -Proof of purchase such as a reception
  -A copy of your wireless bill that shows your phone #.
  -A copy of your ID issued by the Government

• Error 1719: The Windows Installer Service could not be accessed

  Original title: Please help, almost nothing works: video, audio, internet, most of the programs.

  It is a long story and it arrived a bit at random so I have no idea where to start, but I'm going. While trying to install autodesk software, I received the message: Error 1719. Install the WIndows service could not be accessed. This can happen if windows install is not properly installed. Contact your support team. I didn't know what to do so I rebooted and that's where the trouble started. I'm unable to play any audio or video. I am unable to connect to the internet as there is no connection available, but I'd just been connecting to my wireless home network earlier. I am unable to do a system restore because I got the message: System Restore is not working properly on this system. A volume shadow copy Service component has encountered an unexpected error. See the log even application for more information. (0 x 80042302). I think that this problem may have to do with a corrupt registry or some proxy problems or something. I tried to reinstall drivers, but I'm unable to access my cd drive to launch the backup drive drivers provided by microsoft. Please help me, I dual boot ubuntu is how I can access the internet. It must be a software problem if I have my other OS works perfectly. NEEED HELP SO BADLY. THANKS in advance.

  Hi cweb512,

  ·        You have opened a session in normal mode?

  To check that we will follow the tests below:

  (1) you see the mode without fail at the ends of the screen?

  (2) otherwise, and then check the status:

  a. click on start

  (b) in the search box, type msconfig

  c. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  d. under the general tab, make sure a Normal startup is checked.

  e. If not click the option and restart the computer

  Check the status of the Volume shadow copy service and the Windows service install in the services window. Use the following steps to check:

  a. Click Start and type services.msc in the search box

  b. search for services

  c. make sure that the startup type is automatic. Steps to set the auto services

  d. right-click on the service

  e. If the service is stopped and then starts the service

  f. Select Properties

  g and in startup type, select automatic

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I recover my documents and photos after using recovery software?

  Separated from this thread.

  Dear bro

  Today I use lenovo with window 8.1 g50. I used a key to lenovo recovery software and nt could back up, I lost all data and now it's completely new and fresh window. How can I recover my photos only and documenets. Immediate NEEED help please.

  Hi Arif ullahkhan,

  Before I continue with the troubleshooting steps I may need a few more details to better understand the issue.

  1. did you reformat your hard drive during installation?
  2 have. which edition of Windows 8.1 you installed?
  3 Windows operating system you were using before?

  I suggest you try the procedure described in the article and see if it helps.

  How to recover files from windows. Old folder

  http://Windows.Microsoft.com/en-us/Windows-8/restore-files-upgrade-Windows-old

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Var problems!

  Just as I thought I was starting to get the hang of it.

  OK, let me tell you what I got.

  The maintimeline I have the code:

  mov var = 1

  In the main timeline, I also have a movieclip called 'world' (_root.world)

  Inside of the 'world' I have four movieclips called 'pilot' and 'building1' and 'section2' and 'batiments3' ( _root.world.building1 ,_root.world.pilot and _root.world.building4and _root.world.building2 )

  Inside of 'pilot', I have several interpolations on different fames (an interpolation on say frame 1-15, another on say 16-25 etc. etc.)

  Basically, when I click on one of the buildings, I want her to play an interpolation of some all by also changing the var mov to another number - so that when I click on another building after the first, it will play the interpolation depending on what mov is equal. I hope you understand.

  I tried two ways so far is my code for buildings:

  Building1.onRelease = function() {}
  If (_root.mov = 1) {}
  _root. World.Pilot.gotoAndPlay (271);

  _root.mov = 2;
  }
  ElseIf (_root.mov = 2) {}
  _root. World.Pilot.gotoAndPlay (163);
  _root.mov = 3;
  }
  ElseIf (_root.mov = 8) {}
  _root. World.Pilot.gotoAndPlay (163);

  _root.mov = 5;
  }
  ElseIf (_root.mov = 9) {}
  _root. World.Pilot.gotoAndPlay (163);

  _root.mov = 7;
  }
  ElseIf (_root.mov = 13) {}
  _root. World.Pilot.gotoAndPlay (1429);

  _root.mov = 3;
  }
  
  }

  This doesn't seem to work. I have also tried to put the code inside of the moveclip 'pilot', on the top layer interpolations. This is the code:

  Mov var = 1 / / part 1

  then on frame 15

  Stop();

  var = 2 Mov

  When I did it I changed the code on the buildings too:

  Building1.onRelease = function() {}
  If (_root.world.pilot.mov = 1) {}
  _root. World.Pilot.gotoAndPlay (271);

  }

  
  

  ElseIf (_root.world.pilot.mov = 2) {}

  _root. World.Pilot.gotoAndPlay (163);

  }

  ... etc. etc., but it doesn't work, any help pleassseeee, if you don't understand something please ask as I realllyyy neeed help on that.

  Thank you guys

  If you only want a variable named mov, can only declare a.  Using "var" declares a new variable.  Does not use "var" more than once for it.

  But beyond that, you have a larger problem in your conditional statements... Use is when the test for equality and for the assignment of a value =...

  If (_root.mov = 13) should be if (_root.mov is 13), as well as for all others, you have

• Help neeeded on the GaugeField

  Hello

  can someone help me in showing how to add a border color for the GaugeField

  Thank you

  sujithRavindran

  GaugeField percentGauge = new GaugeField("Waiting.... ", 0, 100, 0,GaugeField.PERCENT)
          {
              public void paint(Graphics g)
              {
                  g.setColor(0xFF0000);
                  g.drawRect(0, 0, this.getWidth(), this.getHeight());
                  super.paint(g);
              }
          };
  

• Help keyboard Simulation

  I am trying to use the keyboard to simulate for labview 8.5. There are 2 keys that I can't understand and I neeed to use both.

  The underscore _ and the slash / or is it a back-slash?

  On the simulation vi keyboard keys I need are listed under the reserved name.

  I have looked at the keyboard_event of microsoft office but sorry that was no help.

  I'm sure someone knows how to get these keys to work?

  I have attached the vi keyboard simulation if that helps.

  Thanks for any help.

  Rick.

  Who did the trick. How did you know this?

  Thank you.

• Need help with Personaliztion ofa

  Hi guys,.
  I'm new to personalization Oaf and have some doubts about the same.
  
  I have a value to a bean of choice of the message through default customization. I followed the steps in the guide of the OFA but it doesn't seem to work for messagechoice, for others it does.
  
  I also by default a message of choice bean according to the value of the other beans of choice meesage. Is it possible through customization or we neeed to go for expansion.
  
  Any help will be appreciated

  dear Pierre,

  To set a default value for messageChoice, set the property initial value with the value of the option, not the text you see
  If you see the source code of the web, you will get these
  
  
  Current_Address
  Home
  Address of the identity card
  Home country address primary
  Recruitment
  

  so, to set the default value to the address of the identity card, we put ID_IC in the property of the original value.

  I try failed 'Type' on adding secondary address in HRMS ESS of personal information and she a success, but on the field 'Country', which already has a default value, the customization does not work

  Devguide specify for failing messageChoice or messageRadioGroup

  If the value of the current row of the display attribute is not null, the specified default value is defined as the default selection.
  If the value of the current row of the mode attribute is set to null, the default value in the selection will be determined by the specified default value and apply to the view object.
  Note: If the profile option is not enabled, and the value of the current row of the mode attribute is set to null, the default value in the selection will also be determined by the specified default value and
  not apply to the view object.

• I have a lg 4 k tv (40 "40UH630V TV LG ULTRA HD 4 K) with HDMI 2. 0 and if I buy apple tv 4 can be used with HDMI 2. 0 port or do I HDMI 3 port to use this? Please help me

  I have a lg 4 k tv (40 "40UH630V TV LG ULTRA HD 4 K) with HDMI 2. 0 and if I buy apple tv 4 can be used with HDMI 2. 0 port or do I HDMI 3 port to use this? Please help me

  You can use it with your TV.

• Need help to find an adapter for a third-party monitor

  Hi all! I find myself in need of a little guidance, and I hope that someone out there will have a quick n easy for me...

  I have a Mid-2011 27 'iMac. which has two ports Thunderbolt It is taken with a Wacom tablet that I use constantly, and the other is made by an external hard drive to a solid state, which has a built-in cable to Thunderbolt (no way to hang it on a different port). I also have a 27 "HP monitor that is currently connected via an HDMI USB adapter.

  The problem is that the HP monitor is actual "jiggy" - the USB does not seem fast enough to deal with requests for the monitor. It is almost unusable. I know I should run it via a HDMI adapter Thunderbolt, but as I have already mentioned the two my Thunderbolt ports are already in use.

  Someone at - it ideas? I need sort of three to two ports Thunderbolt hooks, but I can't seem to find anything for less than $300 that would work. (I am illiterate when it comes to the different cables, adapters, ports, etc., so I hope someone can point me in the right direction by using short words... Most of the products that I travel through list specifications that me Chicane).

  The monitor has two HDMIs and a VGA port, and my iMac has a Firewire 800 port, if that helps at all...

  2011 iMac have only 1 Thunderbolt port and there is no such thing as a Mid-2011, you must have an iMac of year later, if it has 2 ports Thunderbolt. All the 27 "iMacs, from 2012 to 2015 the current have 2 ports Thunderbolt.

• Help with Safari!

  My macbook air from apple not to open the Web page like www.investing.com! Help! Different Web pages all okey, but it's not working!

  Works fine for me.

  What extension you have installed and activated?

  Do you have any adware installed on your MBA?