East touch iphone 5 s work on ios 9.3.1 id?

is touch id iphone 5 s work on ios 9.3.1? new update coming to my settings for Upd 9.3.1 gen but ı m not decide to update my phone?

Colarenza wrote:

is touch id iphone 5 s work on ios 9.3.1? new update coming to my settings for Upd 9.3.1 gen but ı m not decide to update my phone?

Use the ID Touch on iPhone and iPad - Apple Support

Yes, it still works.

Tags: iPhone

Similar Questions

  • Touch ID does not work after that iOS 9.3.2 update - iPhone 6

    Hello

    Last night I updated my operating system iOS 9.3.2. After the update my Touch ID did not work. I have removed all traces of fingers and tried to add that my fingerprints. When I did it I got the following error: I also tried to restart my iPhone but still no luck.

    What happens when you do as he says and try again later?

  • Touch screen no longer works after update to IOS 9.3.1

    MY touch screen of my iphone + 6a stopped working after the update to IOS 9.3.1. I tried force closed all day and it made no difference. does anyone know how to fix this?

    I have exactly the same problem with the same Iphone with IOS 9.3.1 + 6

    The only way I can get to work again for a light moment is to reset the Iphone now deep-set buttons home and power together until it restarts.

    It works for a short period of time, and then it freezes again.

    Started to occur immediately after the update restarted the phone.

  • I still can't get a panoramic photo to work on iOS iPhone 5s 9.2.1

    I still can't get a panoramic photo to work on iOS iPhone 5s 9.2.1.  Any solution (s)?

    How would you like that give us for you solutions when you provide the details, like what happens when you try?

  • has dropped iPhone 5s: touch screen no longer works

    I recently left falling m 5s iPhone and when I pressed the home button to turn on, I noticed a horizontal row of white squares to the bottom of the screen and a big white vertical line near the right side. There was also a lot of other smaller lines, and the screen was very low. The touch screen does not work, but the locking buttons and the House doesn't. I got two downs to restart, but when the logo first appeared, the touchscreen still does not work.

    It can be hardware related to your local Genuis Bar or the service provider authorized Apple. -AJ

  • iMovie has stopped working since iOS 10

    iMovie has stopped working since iOS 10

    Now, all I see is a black screen and then it throws me out of the app however does not close the app and the problem does not improve. I lost my summer and extra time making a super great way to 5 hours difficulty megaforce and now I can't watch it

    Hello iMovie does not work,

    After reviewing your post, it looks like the iMovie app is black and take you to the home on its own screen.
    I recommend you read these articles, there are a few things that we can try to get the application running again.

    Force an application to close on your iPhone, iPad or iPod touch - Apple Support
    Restart your iPhone, iPad or iPod touch - Apple Support

    If an application you have installed unexpectedly closes, unresponsive, or will not open - Apple Support

    Thank you for using communities of Apple Support. Good day.

  • iPhone 6 micro works not during calls

    I have an iPhone 6, 9.3.3 IOS operating system and the microphone does not work when I call. No one can hear me, unless I really scream. However, the microphone works on the speakers and FaceTime. Is there a way to adjust the parameters of the microphone for calls?

    Hey there Ech32

    Welcome aboard! The community of support from Apple is a good place to find a solution to your problem of microphone. It would be really beneficial for the other parties to agree on a call phone, rather than simply FaceTime or pregnant, now wouldn't it?

    Don't worry, here is an incredible resource that will help you made in the right direction:

    Get help with microphones on your iPhone, iPad and iPod touch

    See you soon!

  • Camera front iphone 6a stopped working

    My front camera of my Iphone 6 stopped working yesterday. When I pressed the button "rotate camera", the screen freezes a few seconds, the last image of the rear camera remains and is the screen is black or the screen returns to the camera back. I can either use facetime, the other sees me and I do not see too.  I tried to reset. Does not work for some pictures. When you closed the app and reopened later, will not work. I had to reboot again. I got my iphone on August 17 and worked well on facetime and selfies.

    What is the solution?

    If the reset of the force has not worked, set it back to factory settings, without using the last backup. Test the phone. If it works, restore the backup. In case the problem comes back after the use of the backup, your data backup has been corrupted and cannot be used.

    Use iTunes to restore your device to factory settings - Support Apple iOS

    3. If the factory reset does not help, you will need to get the phone checked by Apple.

    Launch a service request

    Find an Apple authorized service provider

    Make an appointment at the Apple Store

  • My touch screen does not work.

    My touch screen does not work. Sometimes, and other times I have to reboot. I restored my phone, but it still has the same problem. Any suggestions?

    The following information is taken from the HT201406 of the Apple KB article:

    If the screen of your iPhone, iPad or iPod touch does not respond to touch

    If your touch screen responds slowly, inconsistently, or not responding at all, follow these steps.

    Check your touch screen

    Make sure your hands are clean and dry, then try the following steps:

    1. If you have a case or a protective screen on your device, try removing it.
    2. Clean the screen with a soft, slightly damp, lint cloth.
    3. Unplug your unit.
    4. Restart your device. If you are unable to restart it, you can force restart your device.

    If your touch screen is still unresponsive as it should, contact the Support technique Apple or make your tablet in an Apple Store or Apple authorized service provider.

    Adjust your settings for tactile 3D

    If you have an iPhone 6s or later that does not properly respond to tactile 3D press, you can adjust the settings:

    1. Go to settings > general.
    2. Click Accessibility > Touch 3D.
    3. Then set the sensitivity of the setting.

    Get more help

  • my iphone does not work 6.

    my iphone does not work 6. Noting happens.

    I try everyting.

    Hello

    Follow the instructions here, as the case may be:

    If your iPhone, iPad or iPod touch won't turn on - Apple Support

    If your iPhone, iPad or iPod touch won't charge - Apple Support

  • iPhone 6 GPS works not

    Hello

    About a year (like on iOS 9 version), GPS on my phone did not work.  When I would try to use maps from Apple, it seems that my car has been the road somewhere in the grass, and sometimes many roads above.  He could never stay with me while driving.  Also, this happened when using Google Maps, so I knew it wasn't just a problem with the Apple Maps app.

    I tried to restart the phone several times, remove the GPS applications and reinstall them, completely wipe the phone and start from scratch, etc.  The problem still exists.  So for a while, I just dealt with him.  I just use GPS my car if I needed one.  Although it has always bothered me that my 128 GB of 6 GPS iPhone did not work.  However, with the release of the 'Pokémon GO' game that is based on the GPS, I am very disappointed that I get a signal error my GPS is not detected (Yes, I have activated the application location services).

    Is there some app or something that I can use to diagnose my GPS antennas in the phone?  I have the full 5-bar signal (point?), and my phone is in developer/debug mode, so I can also see that the detailed signal is - 81.  I have AT & T as my carrier.  There must be a way to determine if something in my phone is damaged.  I would go to the Apple Store, but the closest is an hour and a half, so I would like to avoid that if possible.

    I have the same problem as well. I noticed when I tried to use the WAZE app for the first time since more than a year and it does not locate my position accurately enough. I've never really cared because I rarely travel too far and my GPS worked well enough for me to navigate when I should not rely on a map. Now that Pokémon GO is out which relies on positioning very accurate since some Pokemon can only be captured in some areas, it is really annoying that my phone takes a lot of time to put me in a general situation or fails to find me at all. I know it's just a game, but it's really annoying because it's the first week of release, and all my friends are playing. Seems my GPS only works pretty well to play when I'm more urban areas in my city (perhaps the buildings help focus signals on my phone) compared to parks and suburban more areas. The phone would make my position in the game by tens of metres offshore and sometimes would be me all about teleport to another whole BLOCK!

    I think it may be a hardware problem because I also noticed that my phone started to worsen to pick up WIFI signals as well. I use to be able to walk my business and maintain a good WIFI signal and now it seems that I can hardly connect to my router unless I'm less than 10 feet of it. Around, I read that this could be a short film of either a bad charging cable, damaged by the heat that damage the WIFI and GPS, modules or an update that fried partial systems.

    Edit: I checked my router with the new iPhone of others and they had really good reception of the WIFI signal like what I had at first, that's why I think it's a hardware problem.

  • Unable to connect the iPhone to my work 6 to 2 (portable) via Bluetooth.

    Hello.

    I had the two work 15 "MacBook Pro (retina, early 2013) Mac OS X v10.10.5/Yosemite) and 64 bit W7 EE SP1 to a Thinkpad Lenovo W530 to pair with the iPhone to work 6 (iOS v9.3), but they do not connect. The iOS from iPhone Bluetooth said no "connected". I want to just copy my files between each image.

    Connection of Mac OS x before trying again to 64 bit W7. If I click on the name of his MacBook, it said "unsuccessful connection - make sure that 'computername' is active and within reach. Mac OS X says 'Not connected' to 'iPhone 6"working device. Double-click on "network is unavailable. Make sure that network access is enabled.

    W7 64 bit, I say its Bluetooth and find matching the iPhone detected 6. I see the iOS device. Yet once, "not connected".  HOWEVER, it says "Connection failed"ComputerName"is not supported." and forget this device. WHY?

    Why orders wireless is so difficult? USB cable was easy.

    Thank you in advance.

    This has never been a feature of the iPhone/ipad/ipod

    I'm sorry.

    Bluetooth is supported for hands-free phone features, speakers/headphones, some keyboards a few apps from the app store and the interest of home - if it is provided by the carrier.

    It doesn't connect to other phones, computers

  • Since upgrading to 9.2 this morning, Touch ID no longer works. I reset everything and now cannot even enter with fingerprints. It's all clean, but nothing happens. Grrrrr... Ideas?

    Touch is no longer works after upgrade to 9.2 this morning. I reset all the settings and can not get readmitted prints. Ideas? THX

    Try resetting your device. This will not erase your data stored on that device.

    • Press and hold the sleep/wake button
    • Press and hold the Home button
    • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

    Alternatively, you can go to settings - general - reset - Reset all settings

    If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

    Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

    As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

    More info here:

    https://support.Apple.com/en-us/HT201263

    If these steps do not work, contact Apple and ask for help.

    https://www.Apple.com/support/iPhone/contact/

  • BlackBerry Smartphones BB Torch 9800 touch screen does not work...

    My BB Torch worked very well... so I took the charger and the touch screen wouldn't work at all.  I deleted the old emails and text messages, and even ensured that all the photos saved on the memroy card to free up RAM memory.  But my touch screen just stopped working and still does not work.  Any ideas?  The phone is more than 1 year old and has served me well.  I have the latest downloaded OS, but don't know if there is somewhere a software error or if the phone is all give up!

    Yes, it was the first thing I tried like 10 times. Turn the data cable that connects the upper part of the cursor to the bottom of the phone was the culprit. This also is attached to the 'mouse' trackpad and causes the work does not correctly. I was told that it is a problem that is typical with most slider phones and not difficult to solve. Fortunately for me to be here in the Middle East there is a lot of available mobile phone shops, and I fixed it in about 6 hours to include a new hard plastic protective case, a new trackpad mouse and a screen for about 80 $ US protector.

  • Free Siri eyes not working after iOS 10

    iPhone 6 s 64GB running iOS 10 - Ford Kuga 2016

    I had problems with Siri eyes free of charge since the upgrade to iOS10. Before the upgrade, I could see what Siri was referring to on the screen of the iPhone. For example if I choose a destination for navigation.

    Now when I press the voice button on my steering wheel I can hear Siri speak but the iPhone is still locked and the black screen. Even when I unlock the phone, there is no display of Siri (only the icons normal/splash page is displayed). The only thing that changes is the bar at the top of the phone (time signal etc.) turns to purple.

    This is a new feature of iOS 10 or something is broken?

    I noticed this same problem in my 2016 Toyota Tacoma this week. I can press the button home on my phone and use Siri, but not on my steering wheel talk button. Can't find anything about it on the web.

Maybe you are looking for