UN VPN installation in contact?

Hi all...

in fact, I did installed vpn in contact in my iphone 4 and I even signed

through my email but I do not it connected because I didn't know how to do...

but in any case now, I decided to install United Nations and I don't want to use it if I have when I

went into the vpn in touch applications affecting to disconnect it shiws it you would have to

Download other software to close your session and I clicked the logout button after

There's an open page on safari mu saying that some app download.

but I don't him has not downloaded it and went out to the menu and I watched my vpn in

Touch app so it has been disconnected...

so the question is who is she disconnected real-time now that I can install United Nations from my iphone and

It is not mandatory to install another software that is the vpn software were asked to get disconnected?

To remove the application, press on and hold icon of the app until it wiggles, tap the red X at the top left of the icon to remove.

When finished, press the Home button.

Tags: iPhone

Similar Questions

Try to reinstall osx to sell the macbook pro, but when it starts to install I get a window saying 'impossible to find information about this installation machine' "contact applecare".

I erased from my hard drive to sell the macbook pro to my father. "" When I go to install OSX I am invited to install OS X El Capitan and it will check computer and a window pops up saying 'Impossible to find information about this installation machine' "contact AppleCare. I have an APPT with the Apple store Monday, but was hoping I could fix myself first. Anyone have any ideas?

When you disassemble a machine for sale, the only Mac OS X can be installed without providing WHAT YOUR Apple ID is the original version it comes with.

You can not install ElCapitan in this situation, what is left as an exercise for the buyer.

the pix501 vpn Installer

I have a pix 501 6.3 (5), with these features of license:

Failover: disabled

VPN - A: enabled

VPN-3DES-AES: enabled

The maximum physical Interfaces: 2

Maximum Interfaces: 2

Cut - through Proxy: enabled

Guardians: enabled

URL filtering: enabled

Internal hosts: unlimited

Throughput: unlimited

Peer IKE: 10

My questions are, how VPNs can I, vpn site-to-site and remote user or? Finally, how to create the host remote vpn? Do this through the line of cmd or web-based? Or did someone knows a link or a guide explaining configuring vpn on this model. If more info is needed let me know. Thanks in advance.

You can use L2TP over IPSEC to a windows client. Attached is a link to a doc to configure L2TP over IPSEC between a pix firewall and a w2k pc. It should apply to XP as well.

http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a00800942ad.shtml

HTH

Jon

RA VPN doesn't work is not on the second external interface

I've temporarily came from two Internet service providers in our ASA 5510. Which works very well. I tried to configure the VPN to our second outside interface (outside-XO) and who does not. The first/original VPN works great. Can someone look at the config and tell me if I did something wrong. It is not a customer number, because it is able to connect fine on the first interface. Thank you.

ASA Version 7.1 (2)
!
hostname FW01
dot.com domain name
activate the password * encrypted
names of
!
interface Ethernet0/0
nameif outside
security-level 0
IP address *.229.200 255.255.255.192
!
interface Ethernet0/1
Speed 100
full duplex
nameif inside
security-level 100
IP 192.168.2.3 address 255.255.255.0
!
interface Ethernet0/2
nameif outside-XO
security-level 0
IP address *.157.100 255.255.255.192
!
interface Management0/0
nameif management
security-level 100
IP 192.168.14.254 255.255.255.0
management only
!
passwd * encrypted
banner login attention is a private network. Unauthorized intruders will BE prosecuted to the extent of the ACT!
boot system Disk0: / asa712 - k8.bin
passive FTP mode
clock timezone PST - 8
clock summer-time recurring PDT 2 Sun Mar 2:00 1 Sun Nov 02:00
DNS server-group DefaultDNS
dot.com domain name
permit same-security-traffic intra-interface
object-group service tcp Server
HTTPS and www description
EQ object of the https port
port-object eq www
object-group service tcp Mail
SMTP POP3 access description
EQ Port pop3 object
EQ smtp port object
port-object eq 32000
non-standard tcp service object-group
Port Description 1429 and 1431
port-object eq 1431
port-object eq 1429
object-group service DNS tcp - udp
Description to allow outside DNS resolution
area of port-object eq
object-group service FTP tcp
FTP description
port-object eq ftp
SMTPMail tcp service object-group
Description SMTP only access
EQ smtp port object
IQWebServer tcp service object-group
Www and port 8082 description access
port-object eq www
EQ object Port 8082
EQ object of the https port
port-object eq 8999
SFTP tcp service object-group
Description SFTP_SSH
EQ port ssh object
outside_access_in list extended access permit tcp any host *. *.229.201 - a group of Web server objects
outside_access_in list extended access permit tcp any host *. *.229.202 object-group Mail
outside_access_in list extended access permit tcp any host *. *.229.202 - a group of Web server objects
outside_access_in list extended access permit tcp any host *. *.229.202 object-group DNS
outside_access_in list extended access permit tcp any host *. *.229.203 - group of non-standard items
outside_access_in list extended access permit tcp any host *. *.229.204 - a group of Web server objects
outside_access_in list extended access permit tcp any host *. *.229.205 - group of non-standard items
outside_access_in list extended access permit tcp any host *. *.229.208 - a group of Web server objects
outside_access_in list extended access permit tcp any host *. *.157.101 - a group of Web server objects
outside_access_in list extended access permit tcp any host *. *.157.102 object-group Mail
outside_access_in list extended access permit tcp any host *. *.157.102 - a group of Web server objects
outside_access_in list extended access permit tcp any host *. *.157.102 object-group DNS
outside_access_in list extended access permit tcp any host *. *.157.103 - group of non-standard items
outside_access_in list extended access permit tcp any host *. *.157.104 - a group of Web server objects
outside_access_in list extended access permit tcp any host *. *.157.105 - group of non-standard items
outside_access_in list extended access permit tcp any host *. *.157.108 - a group of Web server objects
access-list 150 extended permit tcp any any eq smtp
access-list sheep extended ip 192.168.0.0 allow 255.255.0.0 10.1.1.0 255.255.255.0
access-list sheep extended permits all ip 10.1.1.0 255.255.255.240
Splt_tnl list standard access allowed 192.168.0.0 255.255.0.0
Splt_tnl list standard access allowed 10.1.1.0 255.255.255.0
access-list extended webcap permit tcp any host *. * eq.164.210 smtp
access-list extended webcap permit tcp host * smtp eq.164.210 all
pager lines 24
Enable logging
logging asdm-buffer-size 200
buffered logging critical
exploitation forest asdm errors
Outside 1500 MTU
Within 1500 MTU
management of MTU 1500
outside-XO MTU 1500
mask 10.1.1.1 - 10.1.1.15 255.255.255.0 IP local pool VPNpool
mask 192.168.14.244 - 192.168.14.253 255.255.255.0 IP local pool VPNCisco
ICMP allow any inside
ASDM image disk0: / asdm512.bin
enable ASDM history
ARP timeout 14400
Global (outside) 1 *. *.229.194
Global (outside-XO) 1 *. *. 157.66
NAT (inside) 0 access-list sheep
NAT (inside) 1 192.168.0.0 255.255.0.0
public static tcp (indoor, outdoor) * domaine.229.202 192.168.14.166 netmask 255.255.255.255 area
public static tcp (indoor, outdoor) *.229.202 www 192.168.14.2 www netmask 255.255.255.255
public static tcp (indoor, outdoor) *.229.202 smtp smtp 192.168.14.2 mask 255.255.255.255 subnet
public static tcp (indoor, outdoor) *.229.202 192.168.14.2 pop3 pop3 netmask 255.255.255.255
public static tcp (indoor, outdoor) *.229.202 32000 192.168.14.2 32000 netmask 255.255.255.255
static (inside, outside) *. * 192.168.14.6.229.203 netmask 255.255.255.255
static (inside, outside) *. * 192.168.14.28.229.204 netmask 255.255.255.255
static (inside, outside) *. * 192.168.14.205.229.205 netmask 255.255.255.255
static (inside, outside) *. * 192.168.14.29.229.208 netmask 255.255.255.255
static (inside, outside) *. * 192.168.14.3.229.201 netmask 255.255.255.255
TCP static (inside, outside-XO) *. * domaine.157.102 192.168.14.166 netmask 255.255.255.255 area
TCP static (inside, outside-XO) *. *.157.102 www 192.168.14.2 www netmask 255.255.255.255
TCP static (inside, outside-XO) *. *.157.102 smtp smtp 192.168.14.2 mask 255.255.255.255 subnet
TCP static (inside, outside-XO) *. *.157.102 192.168.14.2 pop3 pop3 netmask 255.255.255.255
TCP static (inside, outside-XO) *. *.157.102 32000 192.168.14.2 32000 netmask 255.255.255.255
static (inside, outside-XO) *. * 192.168.14.3.157.101 netmask 255.255.255.255
static (inside, outside-XO) *. * 192.168.14.6.157.103 netmask 255.255.255.255
static (inside, outside-XO) *. * 192.168.14.28.157.104 netmask 255.255.255.255
static (inside, outside-XO) *. * 192.168.14.205.157.105 netmask 255.255.255.255
static (inside, outside-XO) *. * 192.168.14.29.157.108 netmask 255.255.255.255
Access-group outside_access_in in interface outside
Access-group outside_access_in in interface outside-XO
Route outside 0.0.0.0 0.0.0.0 *. * 1.229.193
Route inside 192.168.0.0 255.255.0.0 192.168.2.1 1
Route outside-XO 0.0.0.0 0.0.0.0 *. * 2.157.65
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00
Timeout mgcp-pat 0:05:00 sip 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
attributes of Group Policy DfltGrpPolicy
No banner
WINS server no
DNS server no
DHCP-network-scope no
VPN-access-hour no
VPN - connections 3
VPN-idle-timeout 480
VPN-session-timeout no
VPN-filter no
Protocol-tunnel-VPN IPSec
disable the password-storage
disable the IP-comp
Re-xauth disable
Group-lock no
disable the PFS
IPSec-udp disable
IPSec-udp-port 10000
Split-tunnel-policy tunnelall
Split-tunnel-network-list no
by default no
Split-dns no
disable secure authentication unit
disable authentication of the user
user-authentication-idle-timeout 30
disable the IP-phone-bypass
disable the leap-bypass
disable the NEM
Dungeon-client-config backup servers
the firewall client no
rule of access-client-none
WebVPN
url-entry functions
HTML-content-filter none
Home page no
4 Keep-alive-ignore
gzip http-comp
no filter
list of URLS no
value of customization DfltCustomization
port - forward, no
port-forward-name value access to applications
SSO-Server no
value of deny message connection succeeded, but because some criteria have not been met, or because of a specific group policy, you are not allowed to use the VPN features. Contact your administrator for more information
SVC no
SVC Dungeon-Installer installed
SVC keepalive no
generate a new key SVC time no
method to generate a new key of SVC no
client of dpd-interval SVC no
dpd-interval SVC bridge no
deflate compression of SVC
Cisco strategy of Group internal
Cisco group policy attributes
value of server WINS 192.168.14.4 192.168.14.11
value of 192.168.14.4 DNS server 192.168.14.11
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list Splt_tnl
field default value *.com
username * password * encrypted
username * password * encrypted privilege 0
username * password * encrypted
username * password * encrypted
username * password * encrypted
username * password * encrypted privilege 15
username * password * encrypted privilege 15
the ssh LOCAL console AAA authentication
Enable http server
http 0.0.0.0 0.0.0.0 outdoors
http 192.168.0.0 255.255.0.0 inside
http 192.168.1.0 255.255.255.0 management
http 192.168.14.0 255.255.255.0 management
http 0.0.0.0 0.0.0.0 outside-XO
SNMP-server host within the public 192.168.14.27 of the community
location of the SNMP server *.
contact SNMP Network Admin Server
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA
dynamic-map of crypto-XO_dyn_map 10 outside the value transform-set ESP-3DES-SHA
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
outside_map interface card crypto outside
outside-XO_map 65535 ipsec-isakmp crypto map outside Dynamics-XO_dyn_map
card crypto outside-XO_map interface outside-XO
ISAKMP allows outside
ISAKMP enable outside-XO
part of pre authentication ISAKMP policy 10
ISAKMP policy 10 3des encryption
ISAKMP policy 10 sha hash
10 2 ISAKMP policy group
ISAKMP life duration strategy 10 86400
ISAKMP nat-traversal 20
IPSec-attributes tunnel-group DefaultL2LGroup
ISAKMP keepalive retry threshold 600 10
IPSec-attributes tunnel-group DefaultRAGroup
ISAKMP keepalive retry threshold 600 10
tunnel-group, type Cisco ipsec-ra
attributes global-tunnel-group Cisco
address pool VPNpool
Group Policy - by default-Cisco
tunnel-group Cisco ipsec-attributes
pre-shared-key *.
ISAKMP keepalive retry threshold 600 10
Telnet 192.168.0.0 255.255.0.0 inside
Telnet 192.168.14.109 255.255.255.255 inside
Telnet 192.168.14.36 255.255.255.255 inside
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 inside
SSH timeout 5
Console timeout 10
management-access inside
dhcpd lease 3600
dhcpd ping_timeout 50
!
INSPECT class-map
class-map inspection_default
match default-inspection-traffic
!
!
Policy-map global_policy
class INSPECT
inspect the dns
inspect the http
inspect the icmp
inspect the tftp
inspect the ftp
inspect the h323 ras
inspect h323 h225
inspect the snmp
inspect the sip
inspect esmtp
class inspection_default
inspect the ftp
!
global service-policy global_policy
TFTP server inside 192.168.14.21 TFTP-root /.
192.168.14.2 SMTP server
Cryptochecksum:5eedeb06395378ed1c308a70d253c1b6
: end

Hello

Should work.

What I think is the routes:

Route outside 0.0.0.0 0.0.0.0 *. * 1.229.193
Route outside-XO 0.0.0.0 0.0.0.0 *. * 2.157.65

If the first interface is ok, the ASA does not go to route packets via the second interface, so VPN will be not through this interface.

On the client, can you PING the two IPs outside of ASA or only the first?

Try to add a static route on the SAA to secondary education outside interface pointing to the address of the customer and try to connect via VPN and see if it works.

Orders:

HS cry isa his

HS cry ips its

Will be a big help as well, when the VPN connection attempt failed.

Federico.

VPN-ASA5505 problem

Hi all

I inherited this VPN and get slowly upward. At least users can connect to it now! I had a few problems. Users can connect to the VPN, but cannot ping or access shared files on the server (192.168.2.3), but the VPN users must be able to make full use of the network.

I removed the NAT rule.

#no nat (inside) 1 0.0.0.0 0.0.0.0)

And after removing that, VPN users have been able to navigate and access to internal resources. However, users in the office now had no internet. I went and added the rule of return and returned internet.

Believe it is related to the split tunneling, what can I do to activate full VPN access and still have internet at Headquarters?

ASA Version 7.2 (4)

!

ciscoasa hostname

domain default.domain.invalid

activate mI3N1CPoxB4FJhZg encrypted password

2KFQnbNIdI.2KYOU encrypted passwd

names of

!

interface Vlan1

nameif inside

security-level 100

IP 192.168.2.1 255.255.255.0

!

interface Vlan2

nameif outside

security-level 0

209.124.X.X 255.255.255.252 IP address

!

interface Ethernet0/0

switchport access vlan 2

!

interface Ethernet0/1

!

interface Ethernet0/2

!

interface Ethernet0/3

!

interface Ethernet0/4

!

interface Ethernet0/5

!

interface Ethernet0/6

!

interface Ethernet0/7

!

passive FTP mode

Server DNS 192.168.2.3 Group

DNS server-group DefaultDNS

domain default.domain.invalid

the Exchange25 object-group network

access-list standard split allow 192.168.2.0 255.255.255.0

access-list extended sheep permit ip 192.168.2.0 255.255.255.0 192.168.2.0 255.255.255.0

access-list extended sheep permit ip 192.168.2.0 255.255.255.0 192.168.10.0 255.255.255.0

out_in of access allowed any ip an extended list

outside_access_in list extended access permit tcp any eq smtp host 192.168.2.3 eq smtp

outside_access_in list extended access permit tcp any host 192.168.2.3 eq https

outside_access_in list extended access permit tcp any host 192.168.2.3 eq www

outside-access allowed extended access list tcp no matter what interface outside eq 7000

outside-access allowed extended access list tcp no matter what interface outside eq 3389

outside-access allowed extended access list tcp no matter what interface outside eq 587

outside-access allowed extended access list tcp no matter what interface outside eq https

LAN_nat0_outbound list of allowed ip extended access any 192.168.10.0 255.255.255.0

pager lines 24

asdm of logging of information

Within 1500 MTU

Outside 1500 MTU

IP local pool vpnpool 192.168.2.31 - 192.168.2.60

ICMP unreachable rate-limit 1 burst-size 1

ICMP allow any inside

ASDM image disk0: / asdm - 524.bin

don't allow no asdm history

ARP timeout 14400

Global 1 interface (outside)

NAT (inside) 0-list of access LAN_nat0_outbound

NAT (inside) 1 0.0.0.0 0.0.0.0

public static tcp (indoor, outdoor) interface 192.168.2.3 smtp smtp netmask 255.255.255.255

public static tcp (indoor, outdoor) interface 7000 192.168.2.80 7000 netmask 255.255.255.255

public static interface 3389 192.168.2.3 (indoor, outdoor) tcp 3389 netmask 255.255.255.255

public static interface 587 587 netmask 255.255.255.255 tcp (indoor, outdoor) 192.168.2.3

public static tcp (indoor, outdoor) interface https 192.168.2.3 https netmask 255.255.255.255

Access-group out_in in interface outside

Route outside 0.0.0.0 0.0.0.0 209.124.192.45 1

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

Enable http server

http 0.0.0.0 255.255.255.255 outside

http 192.168.2.0 255.255.255.0 inside

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown cold start

Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

Crypto-map dynamic dynmap 10 game of transformation-ESP-3DES-SHA

map mymap 65000-isakmp ipsec crypto dynamic dynmap

mymap outside crypto map interface

crypto ISAKMP allow outside

crypto ISAKMP policy 10

preshared authentication

3des encryption

sha hash

Group 2

life 86400

Crypto isakmp nat-traversal 20

Telnet 0.0.0.0 0.0.0.0 inside

Telnet timeout 5

SSH timeout 5

Console timeout 0

management-access inside

dhcpd dns 192.168.2.3

!

attributes of Group Policy DfltGrpPolicy

No banner

WINS server no

value of server DNS 192.168.2.3

DHCP-network-scope no

VPN-access-hour no

VPN - 5 concurrent connections

VPN-idle-timeout 30

VPN-session-timeout no

VPN-filter no

Protocol-tunnel-VPN IPSec l2tp ipsec webvpn

allow password-storage

disable the IP-comp

Re-xauth disable

Group-lock no

disable the PFS

IPSec-udp disable

IPSec-udp-port 10000

Split-tunnel-policy tunnelall

Split-tunnel-network-list no

TMA.local value by default-field

Split-dns no

Disable dhcp Intercept 255.255.255.255

disable secure authentication unit

disable authentication of the user

user-authentication-idle-timeout 10

disable the IP-phone-bypass

disable the leap-bypass

disable the NEM

Dungeon-client-config backup servers

MSIE proxy server no

MSIE-proxy method non - change

Internet Explorer proxy except list - no

Disable Internet Explorer-proxy local-bypass

disable the NAC

NAC-sq-period 300

NAC-reval-period 36000

NAC-by default-acl no

address pools no

enable Smartcard-Removal-disconnect

the firewall client no

rule of access-client-none

WebVPN

url-entry functions

HTML-content-filter none

Home page no

4 Keep-alive-ignore

gzip http-comp

no filter

list of URLS no

value of customization DfltCustomization

port - forward, no

port-forward-name value access to applications

SSO-Server no

value of deny message connection succeeded, but because some criteria have not been met, or because of a specific group policy, you are not allowed to use the VPN features. Contact your administrator for more information

SVC no

SVC Dungeon-Installer installed

SVC keepalive no

generate a new key SVC time no

method to generate a new key of SVC no

client of dpd-interval SVC no

dpd-interval SVC bridge no

deflate compression of SVC

internal TMAgroup group strategy

attributes of Group Policy TMAgroup

Split-tunnel-policy tunnelspecified

Split-tunnel-network-list value split

gene AzJFyGPWta7durW9 encrypted privilege 15 password username

username admin privilege 15 encrypted password hLjunphNGLvrgsRP

username TMAen encrypted password ojCI79mnpWOehEZC

tunnel-group TMAgroup type ipsec-ra

attributes global-tunnel-group TMAgroup

address vpnpool pool

Group Policy - by default-TMAgroup

IPSec-attributes tunnel-group TMAgroup

pre-shared-key *.

!

!

context of prompt hostname

Cryptochecksum:78c4838558d030ac964d2c331deed909

: end

Hello

Please add the following to your configuration:

nonat_inside ip access list allow any 192.168.2.0 255.255.255.0

NAT (inside) 0-list of access nonat_inside

You must keep the "nat (inside) 1 0.0.0.0 0.0.0.0 ' so that your users access to the Internet.

"Nat (inside) 0 nonat_inside access-list" allows to bypass the above rule only for traffic destined to the VPN pool.

In addition, it is to you if you want to use split tunneling or not.

More information on tunneling split:

ASA/PIX: Allow the tunneling split for the VPN Clients on the example of Configuration of ASA

Let me know.

Portu.

Please note all useful posts

Only way ASA Vpn access

Hello:

I have configured ASA 5505 to acept Cisco VPN Clients on IP-SEC and access internal subnet of tuneling (added a rule exempt NAT too) and the VPN Clients can connect and work without problems.

But no internal network or the ASA I can ping or conect to the VPN Clients.

My configuration:

Internal network: 172.26.1.0 255.255.255.0

The VPN Clients network 172.26.2.0 255.255.255.0

Can you help me?

Here is my configuration:

: Saved : ASA Version 7.2(4) ! hostname ciscoasa domain-name ftf.es enable password xxxxxxx encrypted passwd xxxxx encrypted names name 217.125.44.23 IP_publica name 172.26.1.100 Servidor name 192.168.1.3 IP_externa name 192.168.2.3 IP_Externa2 name 172.26.2.0 VPN_Clients ! interface Vlan1 nameif inside security-level 100 ip address 172.26.1.89 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address IP_externa 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 switchport access vlan 12 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 switchport access vlan 13 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name ftf.es same-security-traffic permit inter-interface same-security-traffic permit intra-interface object-group service terminal-server tcp port-object eq 3389 object-group protocol TCPUDP protocol-object udp protocol-object tcp access-list FTFVPN_splitTunnelAcl standard permit 172.26.1.0 255.255.255.0 access-list FTFVPN_Group_splitTunnelAcl standard permit 172.26.1.0 255.255.255.0 access-list outside_access_in extended permit tcp any host IP_externa eq 3389 access-list outside_access_in extended permit object-group TCPUDP any host IP_externa eq www access-list FTF_ADSL2_splitTunnelAcl standard permit any access-list inside_nat0_outbound extended permit ip 172.26.1.0 255.255.255.0 VPN_Clients 255.255.255.0 access-list inside_nat0_outbound extended permit ip 172.26.1.0 255.255.255.0 host 172.26.1.199 access-list outside_nat0_outbound extended permit ip VPN_Clients 255.255.255.0 172.26.1.0 255.255.255.0 pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool vpn 172.26.1.180-172.26.1.200 mask 255.255.255.0 ip local pool vpn2 172.26.2.100-172.26.2.200 mask 255.255.255.0 ip local pool vpn3 172.26.3.100-172.26.4.150 mask 255.255.255.0 ip local pool vpn4 172.26.1.240-172.26.1.250 mask 255.255.255.0 ip local pool FTFVPN_Pool 176.26.1.150-176.26.1.170 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-524.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface 3389 Servidor 3389 netmask 255.255.255.255 static (inside,outside) tcp interface www Servidor www netmask 255.255.255.255 access-group outside_access_in in interface outside route outside 0.0.0.0 0.0.0.0 192.168.1.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute http server enable http 172.26.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto dynamic-map outside_dyn_map 20 set pfs group1 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto dynamic-map outside_dyn_map 40 set pfs group1 crypto dynamic-map outside_dyn_map 40 set transform-set TRANS_ESP_3DES_SHA crypto dynamic-map outside_dyn_map 60 set pfs group1 crypto dynamic-map outside_dyn_map 60 set transform-set ESP-3DES-SHA crypto dynamic-map outside_dyn_map 80 set pfs group1 crypto dynamic-map outside_dyn_map 80 set transform-set TRANS_ESP_3DES_SHA crypto dynamic-map outside_dyn_map 100 set pfs group1 crypto dynamic-map outside_dyn_map 100 set transform-set TRANS_ESP_3DES_SHA crypto dynamic-map outside_dyn_map 120 set pfs group1 crypto dynamic-map outside_dyn_map 120 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp nat-traversal  20 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 172.26.1.90-172.26.1.217 inside ! webvpn enable outside url-list FTFVLC "DYNAMICS" cifs://172.26.1.100 1 port-forward TEST 3389 172.26.1.100 3389 Terminal Server group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes banner value Bienvenido a la red de FTF dns-server value 172.26.1.100 80.58.32.97 vpn-tunnel-protocol IPSec l2tp-ipsec webvpn split-tunnel-policy tunnelall default-domain value ftf.es group-policy DfltGrpPolicy attributes banner none wins-server none dns-server none dhcp-network-scope none vpn-access-hours none vpn-simultaneous-logins 3 vpn-idle-timeout 30 vpn-session-timeout none vpn-filter none vpn-tunnel-protocol IPSec l2tp-ipsec webvpn password-storage disable ip-comp disable re-xauth disable group-lock none pfs disable ipsec-udp disable ipsec-udp-port 10000 split-tunnel-policy tunnelall split-tunnel-network-list none default-domain none split-dns none intercept-dhcp 255.255.255.255 disable secure-unit-authentication disable user-authentication disable user-authentication-idle-timeout 30 ip-phone-bypass disable leap-bypass disable nem disable backup-servers keep-client-config msie-proxy server none msie-proxy method no-modify msie-proxy except-list none msie-proxy local-bypass disable nac disable nac-sq-period 300 nac-reval-period 36000 nac-default-acl none address-pools value vpn2 smartcard-removal-disconnect enable client-firewall none client-access-rule none webvpn   functions url-entry   html-content-filter none   homepage none   keep-alive-ignore 4   http-comp gzip   filter none   url-list none   customization value DfltCustomization   port-forward value TEST   port-forward-name value Acceso a aplicaciones   sso-server none   deny-message value Login was successful, but because certain criteria have not been met or due to some specific group policy, you do not have permission to use any of the VPN features. Contact your IT administrator for more information   svc none   svc keep-installer installed   svc keepalive none   svc rekey time none   svc rekey method none   svc dpd-interval client none   svc dpd-interval gateway none   svc compression deflate group-policy FTFVPN_Group internal group-policy FTFVPN_Group attributes dns-server value 172.26.1.100 vpn-tunnel-protocol IPSec l2tp-ipsec split-tunnel-policy tunnelspecified split-tunnel-network-list value FTFVPN_Group_splitTunnelAcl default-domain value ftf.es address-pools value vpn2 group-policy VPNSSL internal group-policy VPNSSL attributes vpn-tunnel-protocol IPSec l2tp-ipsec webvpn webvpn   functions url-entry file-access file-entry file-browsing mapi port-forward filter http-proxy auto-download citrix username raul password xxxxxx encrypted privilege 0 username raul attributes vpn-group-policy FTFVPN_Group tunnel-group DefaultRAGroup general-attributes address-pool vpn2 default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key * tunnel-group DefaultWEBVPNGroup general-attributes default-group-policy VPNSSL tunnel-group DefaultWEBVPNGroup webvpn-attributes nbns-server Servidor master timeout 5 retry 3 tunnel-group FTFVPN_Group type ipsec-ra tunnel-group FTFVPN_Group general-attributes address-pool vpn2 default-group-policy FTFVPN_Group tunnel-group FTFVPN_Group ipsec-attributes pre-shared-key * ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters   message-length maximum 512 policy-map global_policy class inspection_default   inspect dns preset_dns_map   inspect ftp   inspect h323 h225   inspect h323 ras   inspect rsh   inspect rtsp   inspect esmtp   inspect sqlnet   inspect skinny   inspect sunrpc   inspect xdmcp   inspect sip   inspect netbios   inspect tftp ! service-policy global_policy global prompt hostname context Cryptochecksum:f5e713652d4a2e2623248d7e49086105 : end asdm image disk0:/asdm-524.bin asdm location Servidor 255.255.255.255 inside asdm location IP_publica 255.255.255.255 inside asdm location IP_externa 255.255.255.255 inside asdm location IP_Externa2 255.255.255.255 inside asdm location VPN_Clients 255.255.255.0 inside no asdm history enable

Raul,

I don't see to apply ACLs inside the interface or as vpn-filter that will prevent the PING of the SAA within the intellectual property to the VPN client.

Are you sure that the VPN client does not have the Windows Firewall on or antivirus software that prevents to respond to PING?

Federico.

LAN ASA 5505 VPN client access issue

Hello

I'm no expert in ASA and routing so I ask support the following case.

There is a (running on Windows 7) Cisco VPN client and an ASA5505.

The objectives are client can use the gateway remote on SAA for Skype and able to access devices in SAA within the interface.

The Skype works well, but I can't access devices in the interface inside through a VPN connection.

Can you please check my following config and give me any advice to fix NAT or VPN settings?

ASA Version 7.2 (4)

!

ciscoasa hostname

domain default.domain.invalid

activate wDnglsHo3Tm87.tM encrypted password

2KFQnbNIdI.2KYOU encrypted passwd

names of

!

interface Vlan1

nameif inside

security-level 100

IP 192.168.1.1 255.255.255.0

!

interface Vlan2

nameif outside

security-level 0

IP address dhcp setroute

!

interface Vlan3

prior to interface Vlan1

nameif dmz

security-level 50

no ip address

!

interface Ethernet0/0

switchport access vlan 2

!

interface Ethernet0/1

!

interface Ethernet0/2

!

interface Ethernet0/3

!

interface Ethernet0/4

!

interface Ethernet0/5

!

interface Ethernet0/6

!

interface Ethernet0/7

!

passive FTP mode

DNS server-group DefaultDNS

domain default.domain.invalid

permit same-security-traffic inter-interface

permit same-security-traffic intra-interface

inside_access_in list extended access permitted tcp 192.168.1.0 255.255.255.0 any

inside_access_in list extended access permitted udp 192.168.1.0 255.255.255.0 any

outside_access_in list of allowed ip extended access entire 192.168.1.0 255.255.255.0

pager lines 24

Enable logging

asdm of logging of information

Within 1500 MTU

Outside 1500 MTU

MTU 1500 dmz

local pool VPNPOOL 10.0.0.200 - 10.0.0.220 255.255.255.0 IP mask

ICMP unreachable rate-limit 1 burst-size 1

ASDM image disk0: / asdm - 524.bin

don't allow no asdm history

ARP timeout 14400

NAT-control

Global 1 interface (outside)

NAT (inside) 1 10.0.0.0 255.255.255.0

NAT (inside) 1 192.168.1.0 255.255.255.0

NAT (outside) 1 10.0.0.0 255.255.255.0

inside_access_in access to the interface inside group

Access-group outside_access_in in interface outside

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

the ssh LOCAL console AAA authentication

Enable http server

http 192.168.1.0 255.255.255.0 inside

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown cold start

Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

Crypto-map dynamic outside_dyn_map pfs set 20 Group1

Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA

map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map

outside_map interface card crypto outside

crypto ISAKMP allow outside

crypto ISAKMP policy 10

preshared authentication

3des encryption

sha hash

Group 2

life 86400

Telnet timeout 5

SSH 192.168.1.0 255.255.255.0 inside

SSH timeout 5

SSH version 2

Console timeout 0

dhcpd outside auto_config

!

dhcpd address 192.168.1.2 - 192.168.1.33 inside

dhcpd dns xx.xx.xx.xx interface inside

dhcpd allow inside

!

attributes of Group Policy DfltGrpPolicy

No banner

WINS server no

value of server DNS 84.2.44.1

DHCP-network-scope no

VPN-access-hour no

VPN - connections 3

VPN-idle-timeout 30

VPN-session-timeout no

VPN-filter no

Protocol-tunnel-VPN IPSec l2tp ipsec webvpn

disable the password-storage

disable the IP-comp

Re-xauth disable

Group-lock no

disable the PFS

IPSec-udp disable

IPSec-udp-port 10000

Split-tunnel-policy tunnelall

Split-tunnel-network-list no

by default no

Split-dns no

Disable dhcp Intercept 255.255.255.255

disable secure authentication unit

disable authentication of the user

user-authentication-idle-timeout 30

disable the IP-phone-bypass

disable the leap-bypass

allow to NEM

Dungeon-client-config backup servers

MSIE proxy server no

MSIE-proxy method non - change

Internet Explorer proxy except list - no

Disable Internet Explorer-proxy local-bypass

disable the NAC

NAC-sq-period 300

NAC-reval-period 36000

NAC-by default-acl no

address pools no

enable Smartcard-Removal-disconnect

the firewall client no

rule of access-client-none

WebVPN

url-entry functions

HTML-content-filter none

Home page no

4 Keep-alive-ignore

gzip http-comp

no filter

list of URLS no

value of customization DfltCustomization

port - forward, no

port-forward-name value access to applications

SSO-Server no

value of deny message connection succeeded, but because some criteria have not been met, or because of a specific group policy, you are not allowed to use the VPN features. Contact your administrator for more information

SVC no

SVC Dungeon-Installer installed

SVC keepalive no

generate a new key SVC time no

method to generate a new key of SVC no

client of dpd-interval SVC no

dpd-interval SVC bridge no

deflate compression of SVC

internal group XXXXXX strategy

attributes of XXXXXX group policy

Protocol-tunnel-VPN IPSec

Split-tunnel-policy tunnelall

Split-tunnel-network-list no

XXXXXX G910DDfbV7mNprdR encrypted privilege 15 password username

username password encrypted XXXXXX privilege 0 5p9CbIe7WdF8GZF8

attributes of username XXXXXX

Strategy Group-VPN-XXXXXX

username privilege 15 encrypted password cRQbJhC92XjdFQvb XXXXX

tunnel-group XXXXXX type ipsec-ra

attributes global-tunnel-group XXXXXX

address VPNPOOL pool

Group Policy - by default-XXXXXX

tunnel-group ipsec-attributes XXXXXX

pre-shared-key *.

!

class-map inspection_default

match default-inspection-traffic

!

!

type of policy-card inspect dns preset_dns_map

parameters

message-length maximum 512

Policy-map global_policy

class inspection_default

inspect the preset_dns_map dns

inspect the ftp

inspect h323 h225

inspect the h323 ras

inspect the rsh

inspect the rtsp

inspect esmtp

inspect sqlnet

inspect the skinny

inspect sunrpc

inspect xdmcp

inspect the sip

inspect the netbios

inspect the tftp

inspect the icmp

!

global service-policy global_policy

context of prompt hostname

Cryptochecksum:a8fbb51b0a830a4ae823826b28767f23

: end

ciscoasa #.

Thanks in advance!

fbela

config #no nat (inside) 1 10.0.0.0 255.255.255.0< this="" is="" not="">

Add - config #same-Security-permit intra-interface

#access - extended list allowed sheep ip 192.168.1.0 255.255.255.0 10.0.0.0 255.255.255.0

#nat (inside) 0 access-list sheep

Please add and test it.

Thank you

Ajay

Uninstall software update Apple says error in seller contact package package unstaller

Try to get itunes working to make a backup of my faulty iphone before repair.

First-itunes does not start says error. I'm trying to fix it, who said success but same error when you try to start it.

Then uninstall completely worked. Then reinstall that seemed to be over except for a message "an older version of Apple software update already exists" then he went down and install itunes apparently had not been completed.

Then I try to remove the update from the apple software and executed by an error in the installation program - it says there is an error in the installation and contact the supplier of the installation package. Same error if I run the uninstall command line program.

Try to repair the Apple Software Update of programs & features Control Panel and then try to update iTunes again.

For general advice, see troubleshooting problems with iTunes for Windows updates.

The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

TT2

Displays the error message when download itunes and other updates, not microsoft... says mode without failure or installer problem

Error code is displayed. indicates the mode without failure or installation problem, contact shop etc. where purchased.

Hi PeterLloyd,

(1) what is the complete error message you receive?

(2) what version of Windows you are using on the computer?

(3) updates are you referring?

Method 1: Try to install the program as an administrator do a right click on the program installation files and select run as administrator, click on continue if you are prompted to confirm.

Method 2: Select the boot and then check if the problem persists

Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

Installer Clean up utility

Hello

I'm trying to remove an I have version 9.1 Tunes from Add and remove programs because when I tried to update it kept popping up a window that says it cannot find a path or a folder named itunes.msi and I cannot load the new update or delete the application addition and delete. I was told that I need a 'Windows Install CleanUp'. I'm hoping for some guidance

Thank you

Al

Microsoft removed the Windows Installer Cleanup utility, because apparently there were some cases where things were deleted which shouldn't have been deleted (see below). If you're ready to take a chance (and I would like to, regarding a problem with iTunes), you can always download from MajorGeeks .

This article previously contained a link to the utility Windows Installer Cleanup (MSICUU2.exe). If you have been directed to this article to solve a problem in one product other than Microsoft Office installation, please contact your software manufacturer for installation on the product.

While the utility Windows Installer Cleanup fixed some installation issues, it sometimes damaged other components installed on the computer. For this reason, the tool has been removed from Microsoft Download Center.

Looking for Wireless-N Gigabit Router with VPN

Hi all

I recently bought the WRT310N Wireless - N Gigabit Router and I'm in love! I've updated from an old Netgear router, so now I'm enjoying performance gigabit.

After buying my SIN, I now use VPN to connect to my NAS when I'm remote. I started to look at installing openVPN on my NAS, but it seemed complicated and buggy, so who's got when I read that a large number of routers today include built-in VPN features.

I searched but did not find any Wireless-N Gigabit router that also included the VPN features. I found 10/100 routers with VPN, but not Gigabit Wireless-N.

Linksys Wireless - N Gigabit routers with VPN integrated? If Yes, can you tell me what model should I buy?

In summary, I like to keep my Wireless-N Gigabit performance and (hopefullly!) the use of the VPN on the Linksys router so that I don't have to worry about the complex and buggy software VPN installs on my NAS. How can I do this?

Thank you!

As far as I know model onlyh 1 that is suited to your requirement is WRVS4400N. Its a Wireless Gigabit router.

Quick VPN compatibility with Windows 7 and Windows 7 VPN configuration connection.

Cisco VPN fast compatible with Windows 7 or not? I have studied several documents that claim their fix works, but not of that actually work. I do not understand how fast VPN installs without problem and connects all the way up to the "check network". Win7 must have some problems with the way it treats an echo request because non of the suggestions work online. It may also not be a problem of firewall because that when the firewall is off the same problem occurs.

Another question the utility of VPN in Windows 7 will work with Cisco VPN routers? What are the requirements of compatibility or the settings to make it work?

Any specific comments would be appreciated.

Hey,.

Thank you for visiting the Microsoft answers community site. The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

For your reference:

http://TechNet.Microsoft.com/en-us/network/bb545442

http://TechNet.Microsoft.com/en-us/library/dd787668 (WS.10) .aspx

Kind regards

Savan - Microsoft technical support.

Bluetooth doesn't work does not correctly after the installation of Windows Vista Home Premium Service Pack 2 (SP2) on Dell laptop

I searched this forum and almost all resources on the net for days now nothing works. Give the message to a thread more appropriate that I couldn't find one that is truly representative and am a newb at this.

Summary of the problem: Bluetooth connectivity does not work properly after the window Vista Home Premium Service Pack 1 and 2 installation (SP 1 and 2).

My system:

Laptop Dell Inspiron E1705, 32-bit Winows Vista Home Premium SP2, Dell Wireless Bluetooth 355 Module + EDR 2.0

* My system was purchased in 2006 with Windows XP, but was not entitled to a free Windows Vista Home Premium Upgrade I did. I installed Windows Service Pack 1 and 2 about a week ago.

Problem: After downloading and installing the Windows Vista Home Premium Service Pack 1 and 2 (SP 1 and 2), my system does not recognize my Bluetooth (a touch of Sprint also) device known as the HTC Vogue. I stress that I have not had any problems with this device before downloads. I can't revert to the pre - SP State 1 and 2 because my system restore does not have these points more.

I have read several posts on various sites about people having similar problems with Bluetooth connectivity after the Vista SP 1 and 2 facilities. The problem is obviously the need for an updated driver. I went to the site to download driver Dell and the Blueooth only updates available are the following. (Note: these drivers all date from 2006 and 2007).

http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=RC956904&l=en&s=pub&SystemID=INS_PNT_P4_9400&os=WLH&osl=en&servicetag=&catid=-1&impid=-1&deviceid=12084&libid=5&typeid=-1&dateid=-1&formatid=-1&source=-1&releaseid=R159805&formatcnt=1&vercnt=1

I had these installed before the SP 1 and 2 have been installed and they worked very well. After the upgrade, these drivers do not work. They won't recognise BT devices. I tried to upgrade the drivers by using update Broadcom suggested below it, but an error of following installation to contact Dell.

http://www.Broadcom.com/support/Bluetooth/update.php

I contacted Dell via e-mail and on the phone, but they want to charge me $60 for a one time service call just to talk about the problem because my warranty has expired. Provide updated drivers is not a problem of security in my opinion. Even after explaining the situation, their continuous support to just send me the link to download Driver Dell above with out-of-date drivers. I guess that's what they are charged to do, they do not have to admit a problem of compatibility. This obviously the same link they would charge $60 to send. I explained that I need just a Bluetooth Driver from Dell to at least version 6.3. Needless to say, I will never buy another Dell product.

On my end, I tried to uninstall my current drivers and then by installing a newer driver to support Gateway (Version 6.2.1.500 for and Acer). This allows me to install some parts of this update and the update Broadcom. However, it is not a perfect installation and expires after about 90% saying "this update is not for this system" because it is the gateway not Dell to be provided. Displays the version of the driver on my computer is Version 6.3.5.430 after doing this, but it is not a complete installation and some features are not available.

Does anyone have experience with this issue? I would like to have a link with some bluetooth drivers generic Version 6.3 type which will allow me to use the Broadcom link to upgrade to the last version that works with Vista SP 1 and 2.

Thank you for your help.

Support FREE from Microsoft for SP2:

https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

Microsoft free support for Vista SP2 at the link above.

See you soon.

Mick Murphy - Microsoft partner

Access to the LDAP VPN ASA group

Hello, I have configured the access remote vpn on asa with ldap authentication. But I can't limit access vpn with specific ldap group.

Here is my config:

AAA-server AZPBTDC01 (DC_Internal) host 192.168.10.250
LDAP-base-dn dc = company, dc = com
LDAP-scope subtree
LDAP-naming-attribute sAMAccountName
LDAP-login-password *.
LDAP-connection-dn cn = Netuser, OU = Services users, or is ASM HQ, dc is company, dc = com
microsoft server type
LDAP-attribute-map AZPBTDC01

LDAP attribute-map AZPBTDC01
name of the memberOf Group Policy map
map-value memberOf "CN = VPN_Admin, OU = ASM group, OU = ASM HQ, DC = company, DC = com" RA_ADMIN_GP

internal group NOACCESS strategy
NOACCESS group policy attributes
VPN - concurrent connections 0
client ssl-VPN-tunnel-Protocol ikev1
address pools no

internal RA_ADMIN_GP group policy
RA_ADMIN_GP group policy attributes
value of server DNS 192.168.10.251
VPN - connections 3
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list IPSEC_RA_ACL_ADMIN

attributes global-tunnel-group DefaultRAGroup
NOACCESS by default-group-policy

type tunnel-group IPSEC_RA_ADMIN remote access
attributes global-tunnel-group IPSEC_RA_ADMIN
authentication-server-group LOCAL AZPBTDC01
authorization-server-group AZPBTDC01
Group Policy - by default-RA_ADMIN_GP

The problem is all the domen users can connect to the vpn. ASA does not ranking filter in a group, no VPN_Admin group users can connect, but the man should not be able to connect.

If it is possible to make this approach work, I wouldn't do it this way. Use rather DAP (Dynamic Access Policy).

The instructions for this are here:

http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-next-generation-firewalls/108000-DAP-Deploy-Guide.html

Search for "Active Directory group" to jump directly to the corresponding section. Note that you may need two policies DAP. One to match users living in VPN_Admin and another default policy to deny access to everyone.

Note for the default "opt-out" policy, that I often make it pop up a message to the end user, saying that they do not have VPN access and contact xxx if they want to fix it.

Frustration of VPN RV110W

I have two places requiring a site to site VPN tunnel.

I installed 2 routers RV110W at each location.

Trying to make the basic VPN settings, I end up with a non-established IPSEC security association.

I before VPN installation but using Windows Server.

Am I missing something basic?

Thank you.

Hello machater_2000,

Thank you very much for this information. The addressing scheme don't look as if it was a problem with the implementation of the tunnel, unless one of the sites has a private on the Wan address. Newspapers can give us the best information as to why the tunnel does not. Need us the logs on both sides after a connection attempt. I know this may sound ridiculous, but after tunnel configurations, you tried to restart each of the routers and then try to connect again. I have found that sometimes the routers must restart after setting up a VPN for the upcoming tunnel. If you do not feel comfortable here information, you can call 1-866-606-1866 and prosecute with the HWC and they would be able to firmly support networks. Thank you machater_2000.

UN VPN installation in contact?

Similar Questions

Maybe you are looking for