EBay and other sites are slow or does not respond, what can I do?

Similar Questions

• Tube videos on Surfline, you and other sites are distributed in two horizontal components, how can I fix? I had a number of accidents and made my computer back

  A month ago, I've added AVG Tune Up (free?) who deleted the registry errors and "optimized" my pc. everything was ok. The or around May 6 I had many accidents of Mozilla Firefox, it would simply close the browser down, this happened for several days. Sometimes he closed a few minutes and sometimes it would not be closed during the session. I sent the accident report that Firefox support has answered with no final solution. It got reset firefox, I have the old settings on the desktop folder, and accidents seems to be stopped. Since the AVG Tune Up has been the only thing that I had added that I have, instead of simply remove machine, made a return back or go back to a date before it had been installed. It is then split horizontal screen that presented themselves, it happens in safari and IE, but Firefox browser is my default.
  I just can't understand what setting needs to be changed, can you help me?

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/

  You can check for problems with the latest version of the Flash plugin and try these:

  • disable an eventual extension of the browser for Firefox Plugin RealPlayer Record and if installed RealPlayer update
  • Disable protected mode in the plugin Flash (Flash 11.3 + on Windows Vista and later versions)
  • turn off hardware acceleration in the Flash plugin
  • http://KB.mozillazine.org/Flash#troubleshooting

• When a Web site is slow or does not load, how can I stop it without leaving Firefox?

  It was easy in the earlier version. This was so frustrating in a year or two that I finally had to ask.

  You can press the ESC key or click on the button Stop/Reload/Go handset which is placed at the far right of the address bar if you want to stop the loading of the page.

  If you want to try again, then you can use the above mentioned F5 or Ctrl + F5.

• Cloud to adobe InDesign download fails with shoing error it can not extract the files in the temporary file.  I tried several times and restarted does not.  What can I do about it?

  Cloud to adobe InDesign download fails with shoing error it can not extract the files in the temporary file.  I tried several times and restarted does not.  What can I do about it?

  To refer to EX11 some:

  Creative cloud (WIP) error codes | Error postal codes of Mylenium

  Mylenium

• IM problems with my wireless connection, it says my DNS server does not respond, what is this, can help to somone, thanks

  IM problems with my wireless connection, it says my DNS server does not respond, what is this, can help to somone, thanks

  Hello

   

  Thanks for posting the question in the Microsoft Community!

  You can't use the wireless connection and the message that the DNS server is not responding.

  The problem may occur if the computer is unable to connect to the DNS server.

  To check, I suggest you follow the steps:

  Method 1: Re-register the DNS

   

  a. Click Start. Type cmd in the search box and press ENTER.

  b. at the command prompt, type the following command and press ENTER:
  ipconfig/flushdns (there is a space between ipconfig and /)

  It will display the message properly emptied the cache of DNS resolution.

  c. at the command prompt, type the following command and press ENTER:
  ipconfig/registerdns (there is a space between ipconfig and /)

  d. at the command prompt, type the following command and press ENTER:

  ipconfig/all (there is a space between ipconfig and /)
  The command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.

  If your IP address of your Local network connection is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer does not receive an IP address from router.
  If this is the case, try this:

  i. enough at the command prompt ipconfig and press ENTER

  II. ipconfig / renew in command prompt and press ENTER

  The test again by typing ipconfig/all to see what is the address? (If you are on a router, it should start by or 192.168.0.x or 192.168.1.x 10.x.x.x)

  Method 2:

  a. click Start and then click Control Panel.

  b. go to the networking and sharing Center and then click on change adapter settings.

  c. right-click on connection to the Local network and select Properties.

  d. Select Internet Protocol Version 6, and then click Properties.

  e. choose the DNS server to obtain an address automatically , then press Ok.

  f. Select obtain IP address automatically.

  g. Repeat steps for Internet Protocol version 4 as well.

  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/2e81fca4-35bb-4af9-86a1-7326d2fe91b3

   

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

   

• HP LaserJet 200 colorMFP M276n slow or does not respond after sleep/wake

  Hi all

  Bought a printer HP Laserjet M276n colorMFP 200. Set up the printer and it's printing of windows and mac computers (also via the local area network (wireless) and even the iPad and iPhone) and scan directly to the pc and mac. Also configured the network folder scan function. Works like charm.

  But... When I try to do something after the machine is in "standby mode" everything goes wrong.

  1 - printing takes longer path to front.

  2 - operation of the toutchscreen (for scanning to network folders, or to photocopy anything) is not feasible. If the machine says it takes about 10 to 15 seconds per order. Sometimes the machine does not respond.

  3 - wireless devices sometimes have trouble with the connection to the device.

  4 - access to the machine via the web interface content (yet) is slower, if not impossible.

  When I manually reboot the printer (using the power button) the machine works fine again.

  But I can't immagine what how HP intends to use the machine.

  Anyone know how to solve this problem, or if it could be a configuration error during my dissertation?

  Also is it possible to disable the sleep mode at all?

  Thanks in advance.

  Kind regards

  By Duringshoff

  The program installation/Specs:

  The printer that is connected to a switch. Connected to the router (wireless).

  Printer is not directly connected to any computer over the network.

  On the printer, I put 'Sleep delay' to '1 hour '.

  On the printer, I set 'Auto Power' down on '' never. ''

  MacBook Pro 13 "under OS X 10.9.1"

  Windows PC and laptop. Both running Windows 7 (Service pack 2, I think)

  IPad IOS 2 7

  IPhone 4 running IOS 6

  router: Cisco EPC3925

  switch: Netgear GS108

  Thanks for letting me know Per_Duringshoff.

  I checked online and the latest version of the firmware is 20140521. But it is not a list for 10.9 update.

  10.8 has the firmware update available. If you have less then 10.9 another Mac or a Windows computer, you can run the update of the firmware in this way. Color HP LaserJet Pro 200 pilot M276nw MFPS.

  Let me know when had time to try the steps listed and if it helped.

  Have a nice weekend!
  Thank you.

• My computer sometimes suddenly restart after disk defragmentation and applied restore.it system still does not work. Can someone help me? : ()

  I need help on my computer, it's a window Vista Home Basic. Sometimes my computer rebooted or encountered problem blue screen. Is it related to my anti virus program or any hardware or software failure? I try to solve it, Defrag disk and system restore, but it still does not work.

  Do you have an antivirus installed? Otherwise download, update and scan with this

  http://www.Microsoft.com/security_essentials/

  Follow these steps

  http://support.Microsoft.com/kb/929135

  and this

  1. Open an elevated command prompt. To do this, click Start, click principally made programs,Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  Type the following command and press ENTER:

  sfc/scannow

  http://support.Microsoft.com/kb/929833
  http://www.howtogeek.com/HOWTO/Windows-Vista/verify-the-integrity-of-Windows-Vista-system-files/

• I am trying to download internet explorer 9 for windows xp 32-bit, and it is said that he does not support what I have... Help please?

  try to upgrade to IE 9 and I have windows xp, it does not support it... help please, says

  If I switch to IE 9 then I need to upgrade to windows 7... and it is probably not a free update for 7

  most likely, you will need to buy win7, before moving on to ie9...

  How much memmory your pc in there?

  I used a dell, Windows XP 32-bit, 4 GB memmory desktop pc, it works fine.

  but, like you, when looking at upgradeing to win7 and because everything today is 64 bits and manufacturers is phaseing on 32-bit almost everything. I chose to tighten teeth to talk and go for win 7 64 bit and a pc with a motherbourd and a chipset that is not obsolete modern day after tomorrow.

• Hello, I have my PC connected to my HDTV and when viewing websites on firefox, Web sites are too small to read. What can I do to solve this problem. I tried dling the add-on no. Squint, but some sites are still distorted. Thanks for your help

  My PC specs:
  Intel Core 2 Quad 2.5 GHz
  NVIDIA 9800GT video card
  600 GB of Seagate hard drive

  The TV is a Philips 720 p (not exactly what model it is)

  You can increase the chain pref layout.css.devPixelsPerPx from 1.0 to 2.0 in 0.1 steps to discover what works best.
  In Firefox 3.6 and later this pref is a string parsed in float value and allows you to adjust the dimensions of all elements more precisely.

  See http://kb.mozillazine.org/about%3Aconfig

• OfficeJet 100: All the lights are flashing, printer does not respond

  Sometimes when I print a document that contains multiple pages, pops up an error. During the print job, the printer stops work on the intermediate page (for example - second page), spits out the rest of the blank page and all the lights flashing. The printer does not any action, only a hard reset (disconnect battery). After that, he will normally for a same day behavior, and suddenly many, same error. Printer is mainly used through Bluetooth, but the same error occurs also in the cable.

  I checked almost everything I could, there is no paper jam, cartridges are placed correctly, battery is fully charged, also this page http://support.hp.com/us-en/document/c02643100, nothing helped. It's really annoying, when it arrives of the exhausts. How can I solve the problem? Any ideas? Thank you very much.

  He gets these events:

  69556: event_dirty_power_up

  69552: event_log_no_media_pick

  Hey @Mar_tin,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I see that your Officejet 100 is having problems with the paper feed. I can help you with that.

  This document describes How to fix paper jams with your printer. If after completing the document, you still get paper jams, the printer will be replaced. You can contact HP support by clicking on this link and fill out the form below to discuss the options based on your warranty.

  Please let me know if this fixes the paper jams or if you have other questions. If not, have a great day!

  If this solves your problem, then please help others find this post by clicking on accept as Solution on my post.

  If you appreciate my help, so please let others know by clicking on the icon below my post thumbs up.

• My iPad mini claims its storage space is full but I use only 10% of the storage. I deleted files and applications but it does not change; What can I do?

  I can't recover any storage and I do not know or cannot find what is using it.

  You probably have an App or a corrupt system and may have to do a restore of the system to be solved. However, it would not hurt to first try a forced reboot. Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears.

  The system restore. First save your device via iTunes. Import your photos on your computer, and then copy all the important data. Reconstruction of the support first test and test. If this does not help, you may need to restore as a new and reconfigure from scratch as the backup may be damaged. It is important to have your photos and your saved data separately from the backup.

  https://support.Apple.com/en-us/HT201252

• Curve of soaked blackBerry Smartphones and does not work - what can I do with it now?

  I went swimming with my curve in my pocket, and naturally, he is now dead.  What can I do with it? send somewhere for refurb? and no, I didn't have insurance, so please don't rub it!

  had the same problem.  people buy it online because they fix them however setting it will cost a lot.  I sold mine on ebay and got 160 for it and put it toward a new phone.

• Just renewed my membership to the Muse and the program does not start, what can I do?

  I changed my billing data, the charge was made, but just Muse does not start. It is for me the survivor of the screen of your subscription again and again and again. What can I do? I have an urgent job to do.

  Refer to this:

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

  Delete the old information in the OOBE and SLStore folders and connect again.

  Mylenium

• I have an old windows laptop, media noise does not. What can I do?

  So, I do not know what that is my laptop. I think it is a Windows XP Professional-2CPU 1, because that's what it says on the bottom. It's an IBM, if that helps.

  I realize that whenever he plays the usual sounds, be it the his error or the sounds of the normal laptop, they are clear or not my headphones are in. However, when I play a video file or music online or in my library, although the set of songs and videos, there is no sound. Even if the headphones are out of the socket.
  I looked to the top of many tutorials, but they are all recent windows computers.
  Help, please.
  Thank you!

  I clicked on multimedia, and then click on Sound Device and nothing showed up. Then I clicked on CD Rom and it shows up

  Drive D:

  Description CD-ROM drive

  Loaded media no.

  Type of CD-ROM media

  Name UJDA755yDVD/CDRW MATSHITA

  Manufacturer (Standard CD-ROM drives)

  Status OK

  Transfer rate is not available

  SCSI Target ID 0

  IDE\CDROMMATSHITA_UJDA755YDVD/CDRW___1.71___\5&3CCF215&0&0.0.0 PNP device ID

  Driver c:\windows\system32\drivers\cdrom.sys (5.1.2600.5512 (xpsp.080413 - 2108), 61,50 KB (62 976 bytes), 03/08/2004 15:59)

  WHAAAAATS HAPPENIIING GAHHHHH

  Make your system and the model is a IBM Thinkpad T40 2373-72U. The audio driver is linked below
  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS013790

  And installation instructions are:

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS013790#install

  Important: To be on the safe side create a restore point before you install the driver, just in case you encounter any problems, you can restore your system to a time before installation.

  How to create a restore point in Windows XP.

  http://support.Microsoft.com/kb/948247

  How to use System Restore in Windows XP.

  http://support.Microsoft.com/kb/306084

  Good luck.

• I can't get updates because of the validation process does not work, what can I do?

  I just formatted my hard drive and need to update my windows xp sp2. i cant get thru because of the genuine validation process that does not work. What can I do next to buy an apple product...

  Hello

  ·         What is the brand and model of the computer?

  ·         You get the error message?

  See this Microsoft KB article and check if it helps to resolve the issue.

  Windows Genuine Advantage does not validate a copy of Windows XP

  http://support.Microsoft.com/kb/916247

  See also:

  How to activate Windows XP

  http://support.Microsoft.com/kb/307890