Edge e530 - 2102 error: error detection in HDD2 - press ESC to continue

Similar Questions

• T530, 2101: Error detection on HDD2 (Sata Mini)

  I started to get this error every time that I reboot my machine. If I press boot ESC is going very well.

  Whats strange is that I watch have a Mini Sata HDD2 and if I do that I've never known about it and I can't put it in the Device Manager, etc..

  How can I get the machine to stop trying to detect this? Very annoying.

  Hi guys,.

  Thanks for the replies. This message was made four months or if there is, and the problem is now resolved. IBM came and replaced care mini sata on the bottom of the laptop. I had no idea I had this card at all, I was not using it. Unfortunately, the message went to replace.

• error detection of 2103 on ssd0 (m2)

  Hello

  I bought a x 1 carbon 3rd gen and it works with no problems until today. I bought the 512 GB ssd option. All of a sudden I get the mentioned error, error detection of 2103 on ssd0 (m2), whenever I turn on the laptop, without the possibility of booting into windows, etc... Is it a failure in the ssd? Any suggestions?

  Any help would be really appreciated.

  Thank you.

  Ok.

  Turn off the battery charger.
  Remove the drive. It's for safety, as I said, to avoid that the system freeze during the process very. Who will save portable to be jailbroken.

  If you have the USB DVD drive, burn the disc, plug it with disc inside, turn on, F12, select the DVD drive to start, follow the information in the form.

  Once the flashing process ends, laptop computer should be powered off of himself.

• Remote Desktop - due to the protocol error detected at the client level (code 0 x 1104), this session will be disconnected

  Original title: Remote Desktop

  I get strange messages when trying to do Remote Desktop (and also connect using Logmein). Sometiems I get this:

  Due to the protocol error detected at the client level (code 0 x 1104), this session will be disconnected.
  Try to reconnect to the remote computer.

  Sometimes:

  Due to an error in data encryption, this session will end.
  Try to reconnect to the remote computer.

  For Logmein, I just get a mismatch. I'm running Windows 7 Pro sp1

  Can someone help here?

  Hi Peter,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  Windows 7 IT Pro category

• Constant error detection - dialog box - Interactive Services

  Starting this morning, that I was bombarded by a dialog box "Interactive Services Detection" - I have never heard of the program and am not sure what to do with it. Him will disappear for minutes about 10 close the dialog box or if, at which it will then return. I got a bluetooth or error detection warning this morning as well (I didn't see what he says before he went).

  I'm running Win7 x 64 on an Alienware Laptop - I've run Mcaffee, as well as a few other security programs and nothing came up with a security issues - so I'm guessing that it is actually a windows program (although I have not heard of it). I went through some of the sites from Microsoft and Google and have yet to find all the information about what the parent program is, what it does, how to disable, etc.

  I bought this new laptop about 6 months ago and this is the first time I have encountered this particular error dialog box /-I do not install, download or change programs recently (within the past, minimum week). So I'm a bit puzzled as to why it rises now - no change in my system. So if someone could provide some help/literature on what this program, it's program of parents and any matter relating to this fact, is, etc. and if this program is actually a virus or a simple program and what I would do with it (delete, repair, etc.) would be greatly appreciated.

  > Win 7 x 64

  > Computer laptop Alienware

  > Most if not all of the drivers, updates, etc. downloaded and applied

  > Router wireless, Bluetooth printer/fax(not connected to this laptop)

  Thanks in advance!

  For more information on the detection of Interactive Services:
  http://wiki.blackviper.com/wiki/Interactive_Services_Detection

  More on Blog MSDN (Microsoft Development Network):
  http://blogs.msdn.com/patricka/archive/2010/04/27/what-is-interactive-services-detection-and-why-is-it-blinking-at-me.aspx 
  Itknowledge24.com

• Error detected while trying to perform the work

  Hello world

  
  

  One of my users tried to run a rule in Hyperion Planning 11.1.1.3 and an error occurred: error detected while trying to perform the work

  
  

  When I went to Essbase, I found that when I launched the rule an error pops up:

  
  

  ERROR - 1006059 - invalid block header: illegal block type - please use the IBH Locate/Fix utilities to find or fix the problem of IBH.

  
  

  I read it could be a problem with corrupt blocks. I'm not familiar with MXL and I read that there are commands that I could run. Someody could give me a help?

  
  

  Kind regards
  

  IBH errors when there is an incompatibility between the .pag file and the index file (.ind). In other words the file pag and .ind file are not synchronized.

  run it separately in maxl

  change the HYPCOLAN database. Invalid_block_headers repair COSTS

  Still the error ibh, then reload metadata and data backups and try to re start batch Scheduler.

  After re - run batch Scheduler the same problem persists, then

  1 save the relational tables of demand in 11.1.1.3

  2 backup essbase objects (rul, otl, CSC, rep)

  Planning enforcement

  (A) create a new planning application

  (B) restore all the 11.1.1.3 relational tables in the newly created application application

  (C) to restart the Services

  (d) copies of objects like .csc, rul, .rep in db (excluding the .otl)

  (e) re - import the data into db

  (f) to run batch Scheduler

  Or you can make use of LCM method

  Try also to optimize your planning applications

  Kind regards

  Sreekumar heraud

• Internal error detected, cannot generate the eBook (11 Robohelp)

  Hello

  I'm new to Robohelp (I've been a user long term of Framemaker for print publications).

  The generation of Ebook of the carrycot single Source Layout has stopped working and I get this message: internal error detected, cannot generate the eBook (11 Robohelp eBook preprocessor 11.0.0.179)

  Compilation G:\Development\Course Development\CONE-online\Characteristics-of-light\Robohelp\Characteristics-of-light\Charac light\ Ta! SSL! \eBook\! epub_tmp_folder_0\Characteristics_of_light. EPUB...

  Preparation create eBook...

  Compensation output folder...

  Preparation of files for eBook...

  Copying files...

  Updating files...

  Finish the preparation in 4 seconds

  Initializing the compiler...

  Generation of output - eBook eBook Manager (11.0.2.240)...

  Transforming XHTML topics...

  About XHTML preparation "Questions_about_light.xhtml"...

  About XHTML preparation "The_Electromagnetic_Spectrum.xhtml"...

  Preparation of subject XHTML ' Using_wave_properties/Interferometry.xhtml '...

  Preparation of subject XHTML ' Using_wave_properties/Mach - Zehnder_modulators.xhtml '...

  Preparation of subject XHTML "Using_wave_properties/The-wave-properties-of - light .xhtml"...

  Preparation of subject XHTML ' Wavelengths_and_Frequencies_in_optical_networks/ITU_bands.xhtml '...

  Preparation of subject XHTML ' Wavelengths_and_Frequencies_in_optical_networks/Light_sources_and_wavelengths.xhtml '...

  Preparation XHTML topic ' Wavelengths_and_Frequencies_in_optical_networks/Wavelengths_and_Frequencies_in_fibre_opt ics.xhtml '...

  Preparing to Table of contents...

  Output EPUB 3...

  EPUB 3 output generation failed.

  Internal error occur, could not generate the eBook.

  Could someone give me advice on what to do to fix? What have I done? I tried to install Adobe digs Eds 4 and it seems stop working after that, but I tried to uninstall that and it is always the same. I also tried to reinstall TCS5. Reactive out of HTML5 still works ok.

  Thanks in advance,

  Sarah

  It could be a longshot, but try to move the project to a place where the path is shorter. I had a similar problem (I think I got the same error a few months ago, but I can't be 100% certain), where the epub was not able to generate, and I tried to move my project to another location where the path to the files was shorter. This solves the problem for me.

• an error has occurred. Please save your work and restart edge animate. -error in windows 8 after t more

  an error has occurred. Please save your work and restart edge animate. -error in windows 8 after more than months of use.

  Someone knows how to fix this? I reinstalled the software and it did not help. I rebooted the computer between uninstal and instal. Software comes from creative cloud with subscription. I'm in the middle of the project, and it is difficult to switch between computers...

  You can try opeing the file .html instead of .a project file?

  Open edge animate.

  File > Open and navigate to the project folder and select the .html.

  If successful, file > save. If successful, I would also recommend file > save to a new folder (other than the current one) as a backup location.

  HTH

  Darrell

• Size of incorrect Page or error detected in Live Preflight Orientation

  Wednesday, November 10, 2010 12:16:40 PM PST

  I am preparing a newsletter created in Adobe InDesign to send to a printer in Germany.  This is the first time I send a document to the press since her arrival in Germany in February and the first time since upgrading my computer and software for:

  MacBookPro: Model 5.3

  Adobe InDesign: version 6.0.6

  Adobe Acrobat Pro: version 9.4.0

  The size of standard paper in Europe is "A4", slightly larger than the size of our 'letter '. Document has been implemented a 'A4' size of the document. A4 is also selected in the print menu.

  Webcam live Preflight shows "size incorrect page or orientation" and wrote:

  Required: 612 PT. x 792 pt.

  Current: 595,276 PT. x 841,89 pt.

  FIX: Choose File / Document configuration to specified the required page size.

  I tried to change the format of the document to the 612 x 792 'compulsory', and the document was tight in the smallest space, ruining the formatting of document! I have undone the damage and looked further for the preferably incorrect setting.

  There is a wrong setting somewhere, but I can't.

  Distiller rejects the document and does not generate a PDF file. The only other errors detected upstream are from the RGB color space.

  All InDesign Menu print and PDF generator preferences settings are set for A4 format, yet Preflight insists on the fact that the Document

  Size and Orientation are incorrect and suggest to change the size to 612 PT. x 792 pt.

  I also noticed that when you configure the PDF file, I did not check "Optimized for Fast Web view," but when I generated the PDF, it "optimized for fast Web view." It seems that there is some preference somewhere is the substitution of my selections. But where...? !

  I was able to generate a PDF from InDesign (without Distiller) and the printer has been able to use the PDF file.  I learned to always use distilled when sending files to printers and to "Pack" the files.  Is there some risks by sending files without using Distiller?

  In addition to the question of size and page orientation, Europe has different standards for space colors and ink printers also. I would be grateful if someone could shed some light on how I should adapt to European standards.

  I was disappointed that Adobe has offered only paid a pension, even if I bought Adobe CS4 less than a year ago. For a pricey

  product, I think that assistance would be available for a minimum of one year.

  ...??? This message to distill indicates you throw your InDesign file on it. Distiller can only distill the PS files.

  Why not use export to PDF?

• LENOVO THINKPAD EDGE 0578-A25, error 0201 stuck touch 28

  Nobody seems to know what to do about it. All the ANSWERS?

  LENOVO THINKPAD EDGE 0578-A25, error 0201 stuck touch 28

  I learned that there was a technical problem, sent to the computer, and they replaced a part, even if my ThinkPad was out of warranty. I appreciate their owner until the problem and treat it with him.

• 0211 keyboard error, press F1 to continue

  I was running a spybot check & when I got back to laptop it was empty. Nothing worked so I let electricity run out & when restart got the error keyboard 0211 press F1 to continue so I did. When I tried to log in to my user account, nothing happens when I press a key. As a system administrator, I get basically the same result when I think I found the solution yet in a few other places system administrator accepts the password. I am able to use, as usual, other user accounts

  MSkey command works with

  Troubleshoot wired keyboards that do not or only the erroneous characters category

  http://support.Microsoft.com/kb/258826

  I have Windows Vista and the command does not work for me, either.

  Use Microsoft Fixit - some devices do not work or are not detected in Windows

  http://support.Microsoft.com/FixIt/

  Software keyboard Test - free to try

  http://www.FileCluster.com/system-utilities/benchmark-Diagnostics/download-KeyboardTest.html

  Test My Hardware utlity is free

  http://testmyhardware.com/test_keyboard.html

  WARNING: I have not used either of the software above the usual warning if you want to. (cma)

• Laptop HP 11-f005TU: error aupdate CPP 1205 and Setup cannot continue

  I downloaded driver broadcom sp 71241 at hp, but when the instalation ran, a short message showed "error updating RPC 1205 and Setup cannot continue." My laptop HP 11-f005tu with windows 8.1 (64-bit) operating system. Could someone help me how to solve this problem because my wifi does not work well. Thank you.

  Hello:

  Try this driver...

  The package contains the Broadcom Wireless LAN driver for the laptop models running a supported operating system. Broadcom wireless LAN driver is necessary to allow the built-in Broadcom wireless LAN adapter.

  FTP://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72927.exe

• Windows XP install error "File\i386\C_437.nls could not be loaded. The error code is 7. Setup cannot continue. Press a key to exit. "

  I've been setting up a windows xp professional operating system, I saw an error message "File\i386\C_437.nls could not be loaded. The error code is 7. Setup cannot continue. Press any key to exit", can anyone help me how can I solve this problem? Thank you.

  Hi HannaAntoun,

  See the article after some troubleshooting for your question:

  http://support.Microsoft.com/kb/330181

  I hope this helps!

• Get 'error, cannot start. Setup can not continue"message when you try to run autorun.exe Fifa 2011

  Original title: error

  In fifa 11 when I run autorun.exe and put the serial key it says: error: could not launch. Setup cannot continue.     What should I do?

  Please help me!

  Hello

  Check if the game is compatible with Windows Vista Compatibility Web site.

  In the meantime, I would suggest you follow these steps and check to see if they help.

  Step 1:

  a. right click on the file and run as administrator.

  Step 2:

  Run the game in Windows compatibility mode and check if that helps.

• Smart hard disk error: "Press enter to continue and it starts OK.

  I have run chkdsk full and sometimes without error, but at startup it says Smart hard disk error. Press ENTER to continue and it starts OK

  Go into the BIOS and run the drive Diagnostics (long version).

  Normally, when you get a SMART disk error this means imminent disk failure.  Smart drive test checks the environment of hard disk and is much more than chkdsk thorugh.

  A cautious soul would replace the disc if the diagnostic test is a failure.

  Is your laptop still under warranty?

  Best regards
  ERICO