EF 75-300mm f/4-5. 6 III USM

Similar Questions

• Capture the Moon?

  How you don't catch the moon on a DSLR?  I have a Rebel T3 w / a Canon 75-300 4.0 - 5 mm telephoto. 6 III USM...  Unfortunately, it does not offer IS capacity.  It's a less expensive lens, but I thought it would be a good (and affordable) goal to use in learning about the import of images far more closely.

  It's...  I tried to capture the Moon and all I see is really a white blur or glow.  Have I not the wrong lens to see craters on the Moon, or do I need a more powerful lens for?  Is there some settings I should change my Rebel T3 to make it work, or maybe something in the Lr4, I need to do?

  Prodigy9 wrote:

  So, it is possible for me to enter a few details of the moon with my 75-300 mm?

  Altogether.

• MacBook Pro 13 inch mid 2012 model No. A1278. Has he a player SATA or SATA III. What are its write speeds?

  MacBook Pro 13 inch mid 2012 model No. A1278. Has he a player SATA or SATA III. What are its write speeds?

  The following is from http://www.everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core-i5-2.5-13-mid-2012-unibody-usb3-specs.html

  In addition, the 6 Gb/s it is SATA III

  Standard hard drive:

  500 GB (5400 RPM)

  Int. HD Interface:

  Serial ATA (6 Gb/s)

• HP Envy 700-515 CTO: how many SATA III ports

  There are four Sata ports on the motherboard, two currently used for the main hard drive and the DVD player.  Are the other two SATA III ports?

  @oj1

  There are five SATA ports and an mSATA port.

• Portege A600-133 - Slim Port Replicator III does not entirely

  Hello...

  I just got a Slim Port Replicator III (model PA3681E-2PRP) and annexed a number of devices (a VGA monitor, a USB keyboard and a USB mouse), according to the user manual.

  The unit, however, does well with my laptop (a Portege A600-133). Specifically, the laptop battery does not, the devices are not recognized and docking led remains off. However, the laptop turns on and off of the port replicator power switch, and the ethernet port also works very well.

  Clues?

  Thank you!

  Dimitris

  Hello
  I also had problems with the Portege A600 and Slim Port Replikator, when I just connect, works all good! Maybe it's too you, when you try to connect to the port Slim R. you: with your hands the laptop with Slim Port R. extra press together in the Air about where the connector is, one when she makes "Clack" and then a right is connected!
  Sorry for my English

• Tecra W50 - A Replicator III, Audio USB problem

  Hello

  I use a port replicator (Toshiba HI SPEED PORT REPLICATOR III PA5117E-1PRP) with a Toshiba Tecra W50 - A with Windows 7 (64-bit).

  I need to use the audio input to speaker and microphone on the Replicator, but no sound is coming or in.

  When I anchor my port replicator (Toshiba HI SPEED PORT REPLICATOR III PA5117E-1PRP), then an unknown device appears in the Device Manager with then the Advanced USB Audio Driver name.

  I was unable to find a driver on the support pages.

  Can someone direct me to the appropriate download area please?

  Help is very appreciated.

  Concerning
  Christian

  Hello

  It is very interesting how Toshiba cares about the problems of their users.
  I think this is the last time I bought some stuff from them.
  Maybe I'll go back to DELL. They care more.
  My post will be probably deleted now...

  Christian

• Tecra Z50-A-12 X is not properly connected to the Port Replicator III

  Hello

  I just bought a TECRA Z50-A-12 X with HI-speed III 120 replicator Port Replicator.

  It works but the computer is not stable and I fear that this will eventually damage the port see me problems when using.

  Indeed, the PC sits well in the Replicator.

  Is there a solution or did not have this app?

  Thank you for your response.

  Nice day

  Hello

  Please don't get me wrong, but you should clarify this with Toshiba directly. Here on this forum, you can hear some useful opinions and comments, but I think you should get info straight from Toshiba directly.

  You can also do is to contact the nearest Toshiba service provider and ask for help. You can visit ASP and demonstrate how it works and I hope that you will get a professional opinion on this problem.

  Long ago I had a Tecra laptop with port replicator, and he was well in place and really does so port replicator he not there no danger of damage to the small port located in the lower corner.

• Portege M750 on plu III Advanced Port Replicator

  The Portege M750 works on Advanced Port Replicator III more (PA3474E-1PRP)?

  Hello

  I discovered that the Express II port replicator is compatible with the Portege M750.

  I searched a bit on google and found this link to an Advanced Port Replicator III over the datasheet. But it s only in German.
  http://www2.inmac.de/inmac_assets/PDF/German/e569412_datasheet.PDF

  However, the M750 Poretge is not listed as a unit compatible and taken in charge.
  So I guess that more Advanced Port Replicator III cannot be used with protected M750 toghterer

  Welcome them

• Portege Z30T - two monitors external PR III possible?

  All, I have a Z30T in a Port Replicator III, connected to an external display Samsung via Displayport. I noticed that there is an unused DVI port on the back of the duplicator. Does anyone know if it'll work to connect to another port DVI Samsung, to operate two external displays simultaneously?
  Thank you.

  There are two sections of video:
  1 vga / dvi / displayport
  2 hdmi / displayport

  You can connect on each display a section and use them at the same time.
  So if you count the internal display, you can use up to three displays simultaneously.

  * edit *.
  I think that one of the external screens must be connected via displayport if you plan to use two external displays. At least I didn't test, so on article 1 dvi and hdmi on article 2 work at the same time. In your case, this is no problem because you're already using DP for a sceen.

• Portege Z30-A-12N with Port Replicator Port Hi-Speed USB III problems

  Hi all

  I have a big problem with my new Portege Z30-A-12N and Hi-Speed Port Replicator III.

  I connected the power, DVI, LAN, mouse and keyboard to the Port Replicator.
  Power, DVI and LAN are okay, but none will be found if I connect something to the USB Ports 2.0 or 3.0.
  No mouse, no keyboard, and no USB key.

  When I start my Portege I must enter a password after you press the power button.
  These password, I could enter with the external keyboard, but in windows, no keyboard has been found.

  If I connect the keyboard and mouse to the USB Ports of the Portege instead of Port Replicator, the two has been found.

  I ran Windows 7 Enterprise on the Portege.
  BIOS version is 3.30

  Do you have a solution for me?

  Hello

  The HI-SPEED PORT REPLICATOR III PA5116E-1PRP supports 2 x USB 2.0 and 4 x USB 3.0 ports.
  You n t special need Win 7 drivers in order to be able to use the USB ports or other interfaces such as VGA, DVI, audio, etc.

  Sound problems, make sure that the audio device has been selected in the right panel-> sound-> playback tab

  By the way: Win 7 needs USB driver 3.0 which is preinstalled when the laptop was equipped with USB 3.0 ports. My knowledge if your mobile phone does not support USB 3.0, you will be able to use the port replicator USB 3.0 ports.

  Finally and above all devices must be connected before you start the computer. The decision supported and compatible specifications: Portégé R30 - A, Tecra Z40 - A, Tecra Z50 - A, Portégé Z30-A/Z30t-A, Tecra A50 - has

• Toshiba high speed Port Replicator III - use of 2 x 4 k monitors on 60 Hz

  Dear Toshiba support.

  Is it possible to run 2 x 4 monitors k on 60 Hz on the Port Replicator Port Hi-speed Toshiba III (dockingsation)?
  He says he has Display port 1.3 (supports 4 k monitor the 60 Hz.) and a 2.0 HDMI (which also supports monitor k 4 on 60 Hz.).

  With sincere friendships.
  Augurkie

  PauPau wrote in this thread on the high speed Port Replicator III
  https://Forum.Toshiba.EU/showthread.php?83052

  DisplayPort supports the following resolutions:

  Resolution - Refresh Rate (HZ)
  640 x 480 - 60,72,75,85
  720 x 480-85
  800 x 600 - 56,60,72,75,85
  848 x 480-60
  1024 x 768 - 60,70,75,85
  1152 x 864-75
  1280 x 720 - 50,60
  1280 x 768 - 60,75,85
  1280 x 800-60
  1280 x 960 - 60,85
  1280 x 1024 - 60,75,85
  1360 x 768-60
  1366 x 768-60
  1400 x 1050 - 60,75
  1440 x 900 - 60,75,85
  1600 x 1200-60
  1680 x 1050-60
  1920 x 1080 - 24,25,30,50,60
  1920 x 1200-60
  2560 x 1600-60
  3200 x 2000-60

  But it seems the resolution also depends on the GPU built in the notebook

• Driver Toshiba Hi speed Port Replicator III

  Hello.

  I can't find a driver for Toshiba Hi speed Port Replicator III driver on your driver page.

  These need drivers or they are plug-and-play? The port replicator USB ports do not work.

  Thank you.

  I'm not 100% sure but I think you should be able to use all phones compatible with this port replicator.
  What model of laptop do you have?
  Do you use it with the original OS that you got with it?

• Portege Z30 16 GB with high speed Port Replicator III and two monitors - resolution

  I have a Portege Z30 with 16 GB of Ram, connected to a Toshiba high speed Port Replicator III which is connected to two monitors running in mode extended.

  The monitor attached to the first section of the video is 1920 x 1200 running.
  However the second monitor is only show support for a maximum of 1280 x 1084.

  The monitors are identical, and both are connected by DisplayPort cables.

  I tried to lower the resolution and save the settings on the first monitor to see if it offered options on the second monitor, but the options remained the same.

  At this point, I have narrowed down to 1280 x 1024 so that it conforms to all the monitors but would like to a plus-res solution.

  Does anyone know if there is a fix/work-around for this?
  If this is a hardware limitation, has anyone tried a USB 3 to DisplayPort adapter in a similar configuration?

  Thank you!

  At the same time using two displayports?
  I wonder how it is possible, because of my knowledge it is not possible... as far as I know the Port Replicator III supports two DisplayPorts but you could choose and use one of them...

  In any case, you can use both with a lower resolution, I guess that this problem can be caused due to incompatible display drivers.
  I suggest you to uninstall reinstall or update the display drivers and check if it helps

• Tecra Z40-A-176 - how to get support for high speed Port Replicator III?

  Hello

  a customer garage bougt some Tecra Z40 A 176 with high speed Port Replicator III. Unfortunally to either the displayport Port replicators is not working properly and I want to have the support so.

  What I found was the support for laptops page itself, but not for the port replicator.

  With regard to:
  Klaus

  I want to have the support so.

  What do you mean by support and what is the problem with the display port?

  If you have hardware problems, you can contact your dealer or contact the Toshiba authorized service provider that is available in your country.

• Portage Z30-A-13W connected to the high speed Port Replicator III - USB problems

  Hi all.

  We recently bought a new Portage Z30-A-13W and Hi-Speed Port Replicator III.
  Setting network and graphics work correctly with port replicator, but the USB ports don't work at all.

  I tried the port replicator USB 2.0 and USB 3.0 and I can't seem to work with a keyboard, mouse, USB key or a mobile phone.

  In the case of mobile phones, it is also no output power of the ports that the mobile does not start to load.

  At any one another experianced this problem and what was the resolution.

  Thank you very much

  Jonathan Davies

  Hello

  As far as I know additional drivers are not really needed to use the USB ports.
  This is why I m wondering why don t USB ports work.

  It might be possible that ports high speed Port Replicator III USB are faulty, but to be honest, I can't imagine that all 6 USB ports may bad work at the same time.

  So maybe it s a software problem.
  First of all, I would recommend the default BIOS and check the USB legacy support for keyboard and mouse could be activated.
  After access to the Device Manager and remove / delete the USB hubs and controllers in the list of devices.

  Keep high speed Port Replicator III connected to the computer and restart the device.
  Usually, the system should recognize automatically deleted USB ports and must update the drivers of USB ports.

  I hope that the USB ports don't work after this short workaround solution.
  Keep your fingers crossed.