El Capitan not reading my seagate SSD!

Similar Questions

• USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.

  USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.

  It's a new 12 '' MacBook

• Portege R500 - after what ODD hardware upgrade will not read

  Recently, I bought a vintage 2008 Toshiba R500-11Z laptop ultraportable. He needed a new keyboard, because most of the keys are dead, so I bought a new replacement (exact same keyboard, an eBay seller). I also decided to give a new breath of life by installing a SSD drive. The old keyboard was attached to the frame with some sort of sticky back plastic, which is not reusable, so for the new keyboard, I used a strong adhesive tape double-sided. Before you screw the plastic rear landing gear I installed Windows 7, with the loosely adapted landing gear up. Installation of Windows is complete and everything seemed fine. After screwing in the landing gear, I discovered that optics player his original "open-top" mat * a DVD-RAM UJ - 844-S would not read disks. He just made a noise 3 times but does not spin then upward as it normally would. Drive is visible in Explorer solutions and Device Manager.

  After unscrewing the undercarriage, the relocation of the optical drive and rescrewing several times, I was not able to get the optical drive to play all discs. What I created is that the disc must be catching on the ceiling, thus signalling the reader to turns don't not upward; leaving the screws each side of the lander was allowed to create a gap, so there is more room between the optical drive and the ceiling of the laptop. Disks will then turn upward and Windows AutoPlay will open to them. What I can't work, it's what has changed in regard to the way in which the drive is mounted and its position relative to the ceiling above him. Or if the reader is now trying to turn a corner. There are two blocking screws that hold the drive in place, so that the reader must be at the same place its always been.

  I was wondering if anyone has come across this problem before, and if there is an easy solution. According to me, I hit a wall of bricks on this one!

  Thanks in advance.

  Just to say, after a lot of head scratching, I worked on the problem. I had made a mistake by attaching the clamp metal Assembly at the rear of the optical drive.

  I had screwed the clip outside the Orange connector when he had to be inside (between the optical drive and the orange connector). It seems that it must have pushed the player to place just enough to prevent it from functioning properly.

• Mac Pro can not read SD cards more

  Hello

  I need help with a strong issue with my Mac Pro, who can not read SD cards more. Gluing of any player on any USB, an SD card is not recognized more. Strange also when I put a CF card in the same drive, it works and I can see the CF card on my desk.

  Someone at - it a response?

  (Mac Pro 3.1, latest El Capitan, several players used, same problem)

  What do say to recognize?

  Finder?

  Disk utility?

  System Profiler?

  OS X: about system information and System Profiler - Apple Support

  Have SD readers that you have linked?

  When it is connected with an SD card lists what System Profiler under USB?

  You should see the reader and the card.

• I have iPhotos on external hard drive, but can not read on my Yosemite

  My old mac is 2008 updated to lion. All my photos are on iPhoto and I was saving to external hard drive. My new computer which has the Photo can not read the photos. Is it possible without downloading to my computer.  My computer's OS X El Capitan 21.5 inch end of 2015. 10.11.3 worm. Processor 2.8 GHz intel core i5 8 GB 1867 MHZ DDR3

  What format is the external hard drive?

• Satellite L650 - ODD does not read most of the CD or DVD after BIOS update

  While DVD copy, asked me to do an upgrade of the bios for the included software on my laptop, so I thought that coming from toshibsa, it must be safe. I closed all my apps and let the update occur, restarted my pc and tried to continue to copy my dvd.

  Now my dvd writer does not read most of my CD or DVD, original as well.
  I managed to get hold of my previous Bios version after a battle before the update to see if I can go back to my old version, but the executable file runs a program that says the version is older then the one I use, so it will not load it.

  Any help would be greatly appreciated I have two days to copy 100 DVDs for a customer and I can't do it now,

  I have a laptop Toshiba Satellite L650 running windows 7 64 bit 8 GB memory with a SSD hard drive

  > I can return to my old version, but the executable file runs a program that says the version is older then the one I use, so it will not load it

  I don t think that the BIOS is the problem here, the point is that CD and DVD support details are stored in the firmware of the CD/DVD drive and NOT in the BIOS of the laptop.
  So in my opinion the update of the BIOS is not the reason for your problem.

  I think you should check if cleaning the laser lens allows you to read discs.
  Use a fluid wadding tip and alcohol to gently clean the laser lens.

• Bootcamp does not read my Mac OS partition

  I have not used Bootcamp for awhile but today I need to work on windows, it works fine but when I try to access my files on the Mac OS partition, it is said that it can not read and it must be formatted, but it is not damaged or something like that...

  How can I fix it? I serchead for some updates, but I've not found anything.

  Mac OSX, El Capitan, Bootcamp 6.0, Windows 10.

  If OS X Terminal shows all the outputs for the following command.

  Cs diskutil list

  so you can not read OS X files from Windows. There may be a workaround solution, if you post production.

• El Capitan, not propagating on share permissions

  El Capitan, not propagating on share permissions

  Hello readers. I have a shared folder on my iMac 5 k

  Macintosh HD/users/shared/Enterprise Server

  Myself and two users with read/write privileges to save files and folders to this share

  When we create folders and saving documents in this folder structure that they retain ownership of the creator/client rather than inheriting them from the folder enclosing

  It is therefore difficult to collaborate.

  I have re-spread permissions command start + R which corrects the possession to the records and current files but does not solve the issue of inheritance for the newly created elements

  I found similar stories on the web

  It seems that POSIX is allowing for a legacy and that ACL is just missing

  I was able to explicitly create ACL using handyman tool and all works well on a part of the test. It reminded me the tools in the Apple server.

  Surely, I shouldn't need to do this, use a third-party application. Am I missing something? I ask a large part of the operating system, the server right?

  I'll take a stab here (and possibly wrong) and suggest that he might have something to do with the new SIP functionality in El Capitan:

  On the Protection of the integrity of the system on your Mac - Apple Support

  (click play / the user root on the link as well)

  If you do a search for "disable sip" on these forums, there was some discussion with instructions on how to disable SIP in the terminal.

• Account Internet preferences system does not recognize the password for my AOL account... and so mail does not read the email in my AOL account

  Account preferences Internet system does not recognize the password for my AOL (Internet) account... and so Mail does not read the email in my AOL account

  Mail asking me to "Enter your password for [my AOL account] in Internet accounts."

  When I enter my password Internet accounts says it is "Impossible to verify the account name or password."

  iMac (24 inch, early 2009)

  Processor clocked at 2.66 GHz Intel Core 2 Duo

  Memory 8 GB 1067 MHz DDR3

  OS X 10.11.1 (B 15, 42) El Capitan

  Remove the password in Keychain Access (Applications/Utilities). While there, menu Keychain Access of relief.

  The problems of Keychain - see post of khati

• How migrations (El Capitan) not come to the photo library?

  Hello

  I want to use the Migration Wizard to move my user account for my MacMini BUT put the photo library on a separate hard disk from the system drive.

  My MacMini has two internal drives, the library is huge.

  The MacBook (early 2008 - running Snow Leopard) old a MacMini (late 2009 - El Capitan cool running).

  How migrations (El Capitan) not come to the photo library? It seems to only be set for the entire account.

  If I do this, put the library on a separate disk. How to use Time Machine to back up the library?

  The separate HARD disk transfer photo library, and then delete the disk that you are migrating.

  Time Machine backup disks all connected, unless you put them in the list of exclusions.

• My star bookmark icon does not show my favorites already recorded. My Favorites still exist just unordered, bookmarks section that the star icon does not read the

  Hello. My Bookmark star icon does not read my favorites. I can always use it to record the new bookmarks, but I don't see the 'old'. My Favorites are still there, but the star remains white when I open them and shows them as not saved. Thanks in advance for any help!

  Some added addons toolbar and anti-virus are known to cause
  Firefox issues. Disable all of them.

  When the star is to check the Bookmarks Manager, he must control
  all the entries in the file. It could be that the bookmark of the webpage has been deleted.
  Or the sea address have changed. I'm not aware of entries to the
  bookmarks being blocked, unless you have something blocking the changes.

• Cross-origin request blocked: the same political origin does not read the remote resource

  while trying to perform the CORS get request I get this error:
  Cross-origin request blocked: the same political origin does not read the remote resource
  In chrome it works fine.
  I'm using firfox version 29

  A good place to ask for advice on web development is the forum mozillaZine 'Web Standards Development/evangelism'.

  • http://forums.mozillazine.org/viewforum.php?f=25

  Aid to this forum are better informed on issues related to web development.
  
  You must register on mozillaZine forum site to post in this forum.

• Optical drive will not read anything else professional films

  So, I am owner of a 2012 MacBook Pro 13 ". The computer comes with Intel Core i7 processor and has the maximum of 8 GB of Ram. The problem is that the optical drive that is built into the computer will read nothing else done professionally movies. It can read disks of movies like the Lord of the rings and Wargames, to name a few, I tested, but it will not read any DVD-R disc or to a CD. I tried the CDs as Metallica music... And Justice for all after try in another computer and a radio and get good results when it just won't play on my Mac.

  I have had this problem in the past , but at the time the optical drive not read anything at all. This occurred in early December and I fixed it on 20 December. To solve the problem, I went to the Apple Store and they can Reset the P - RAM. The Apple guy he told me to make sure to disable every night. I did this because it's what I did in the past. After that, I was able to play any CD or DVD and burn them. I also tested it every two weeks by playing a DVD in there to check that it still works. But I discovered that it was broken again when tried to insert a DVD-R to burn things on it and the computer only it spun and then ejected it. I've known this current problem since around mid-April.

  I did some research on it and what I have read I believe that I must buy a cleaning disc and run it in my optical drive to clean the lens of the eye out, but I don't understand how I am able to read some disks and not others if that is the problem.

  Can I take it again in the Apple Store and get it looked like or should I buy a cleaning disc and run it through my optical drive, and then decide what to do next? I'm in no hurry to get this problem fixed because my guarantee does not expire until the end of July this year.

  I don't know why you want to put some words in BOLD and a few words in normal font. Frankly I find it a bit annoying when someone does something like that, but oh well... what you could do is to try a cleaning disc (the one with little brushes this topic) or a good breath of air compressed. In addition, some brands of DVD - R Virgin do not work as well as others. I found verbatim to be good, maybe maxell or Taiyo Yuden. Your mileage may vary...

  If this still does not work, feel free to zap the pram x 2-3) and do an smc reset. Shut down the computer, plug power adapter, hold down the left shift, control, option, and button works / stop for about 45 seconds, let go of all of them, then press the power button to restart. If none of this works, then by all means to make a genius bar appointment and bring it in to your local Apple store. Hey, if you have an extended warranty, might as well use it, right?

  Good luck

  JB

• My iMac does not read DVD

  Hello

  My iMac does not read DVD. Every time when I put in DVD (free or with content), it runs for a while and that he died. CD works for most very well, but sometimes they go inside and the drive is not recognized. And also sometimes the DVD drive is not recognized in ¨informations on system"in the Apple menu.

  Thank you

  Matouš PIkous

  Did you use a cleaning CD in the optical drive?

• Attached to a letter from Apple is not read by windows computer

  Attached to a letter from Apple is not read by windows computer.  No current attachment.

  If you plan to support, you must provide much more information. Tell us exactly what you are doing and what is happening, including at the receiving end.