EliteBook 755 g3: elitebook HDD

Similar Questions

• HP EliteBook 745/755/725 G3: Missing 'Label restore electronic tool' to fix the POST error boot in the BIOS 1.08

  The latest BIOS for the HP EliteBook 745/755/725 G3 made reference to a 'restoration tool electronic Label' to remove a MESSAGE error after flashing the BIOS to 1.08.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7815285&swItemId=ob_160552_1&swEnvOid=419...

  According to the release notes: "NOTE: for systems that do not comes with BIOS version 1.05 or later, this utility may be required if the BIOS has been updated.» Visit the page of the BIOS and drivers on www.support.hp.com and follow the instructions using the Restore tool from HP on the electronic label. »

  This tool can be found on the support Web site.

  If flashing the BIOS is causing this problem for systems shipped with a version of BIOS before 1.05 why is the tool not available to correct the problem?

  Better question is why was - this BIOS update published at all if it can cause a system to stop for 15 seconds during POST if you do not have the correction tool POST message as described in the release notes and the POST message?

  Version 1.01 of the electronic Label restore tool has fixed my problem.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_162255_1&lang=en&cc=us&hprpt_id=HPGL_ALERTS_1873677&JumpID=em_alerts_us-us_Mar16_xbu_all_all_641843_1873677_LaptopsandHybrids_routine__/

• update from HDD to SSD on elitebook 8460p

  Hello

  I own the elitebook 8460p.

  I want to upgarde it and replace with a new SSD HARD drive.

  A new SSD SATA3 would work?

  What features should I put my mind in the purchase the SSD?

  Thank you!

  Hello

  SASA3 is backwards compatible so would work. In fact they are standard now, but I would go for Intel, Samsung, SanDisk, Crucial. I have not had luck with Kingston and OCZ.

  Kind regards.

• EliteBook 850: running out of disk space

  I'm running out of disk space on my C drive and I moved what I know I can move safely. Are there other places I can watch I don't know or is there any bloatware that I can remove? My current storage is 220MB and have only 8.5 MB remaining for the updates.

  Hello

  Thanks for posting in the HP Support forum!

  What is your availability/capacity of the HDD/SSD? May be mean you gigabytes by writing that "my current storage is 220 MB and only have 8.5 MB remaining for the updates." - could you elaborate? Is this HP Elitebook 850 and Win 7?

  You can use the free space on the software disc such as the large TreeSize > > http://www.jam-software.com/treesize_free/

  He can tell you what kind of things you have on your computer use the most space.

  You can run programs such as CCleaner (www.piriform.com) or

  the built-in Disk Cleanup to remove unnecessary temporary files

  > > http://www.sevenforums.com/tutorials/818-disk-cleanup-open-use.html

  You can move personal files (e.g. documents, pictures, videos etc.) on an external device (e.g. USB or SD memory card). Please, do not directly move/cut files programs or windows important things unless you're 100% sure what you are doing.

  You can view this article > > http://www.howtogeek.com/125923/7-ways-to-free-up-hard-disk-space-on-windows/

• HP EliteBook 8730w: replacement of SSD for the boot drive not recognized

  I'm trying to install a Samsung SSD 840 EVO 500 GB instead of the original 500 GB HDD in my Elitebook 8730w (product no. VF889PA #ABG). The 8730w has the latest BIOS (F.20) installed and that is running Windows 7 Professional 32-bit (fully patched).

  When it is connected to the laptop through a USB adapter, to clone the HARD disk image. the SSDS works correctly. Cloning through data Migration Samsung is reported as a success, and the image of the C:\ drive occupies approximately 153 GB. The image of the disc does not include the partition of 1 GB dedicated to HP_TOOLS, due to a known limit of the Samsung software supplied.

  When it is installed in the HARD drive Bay. the SSD is not recognized as a drive and does not appear in the list of startup options. The available boot options only shown are the DVD or a network boot.

  would be very grateful for any advice on the steps required to successfully install the Samsung SSD as boot drive.

  Hmmm.
  Honestly no, I'm not happy with this one. If it was my machine, I'd be a little concerned about whats the corner of the street. In view of the age, is not surprising really, things wear out over time, the mere fact of electronics.
  
  Search through everything you have posted, all photos, pdf, all the text double checking. I am absolutely puzzled as to what happened. If you 100% does not reinstall the hard disk between the posts above where no HARD drive is detected in the menu boot options for the post below that where the HARD drive is detected in the same menu. I would say that you have a problem with either, the ssd, the computer motherboard laptop or the small connector on the sata port, I think on these is integrated on the motherboard, so it seems that your advice is doubtful.
  If his works now, great... but be aware that your machine can fail at some point in the near future. And it looks like a defect of the motherboard, other things are probably waiting to fail.
  
  There is no reason whatsoever your laptop must not have seen this ssd at first startup. A HARD drive is a HARD disk, if its compatible sata, then it will work, no doubt. When he is not on an older machine, its probably a sign of a faulty component.
  
  Looking through your bios options, I recommend the following.
  
  On startup options, get rid of internal nic pxe boot, that will only slow your machine at startup as it will seek for a network bootable device. This is the message that you get at startup saying Media Test Failure, this page is preventable with this option disabled.
  Less built lan/wlan switching on enabled in the options of the terminal, also change. This means that if you use wifi at home for example and you decide to plug in a cable network directly to the router to speed up the connection, it will not pass if it is not defined, you will have to do it manually. I work in a large company and the number of people who have this option is unreal. They all assume when they are docked they will on the wired connection.
  
  Because we are here too, if you ever have problems with a flickering screen, first thing to try, is disable the ambient light sensor which is just below this option of switching. Its fine on normally, but its quite common on 8560p for this causes a flickering screen.
  
  Hope that helped. Good luck in what you decide to do with the machine

• EliteBook 8440p: Recover my windows series

  Hello

  I bought a 8440p with a friend here last week, I tried to restore the system from the F11 key at startup, but it seems that this key don't have any function, I googled and I found that I have to download HP protect tools and HDD decryp but without any solution

  https://translate.Google.com/translate?SL=FR & TL = in & js = y & PREV = _T & hl = en & ie = UTF-8 & u = http % 3A % 2F % 2Fh20564...

  I found later that my friend changed the OS and it losts the win 7 license key and I have found the sticker under the laptop

  My question is if I can get the key to my BONES, knowing that I have the serial number of my laptop?

  Thank you that I advance for your help

  You are the very welcome.

  Sorry, the numbers are no longer valid.

  There is a website to contact HP by countries that you can try to navigate around...

  http://welcome.HP.com/country/W1/en/support.html

  On the HP Elitebook 6930p, who was the model that preceded the 8440p and looks exactly the same, the Windows product key is the holder of the card plastic on the bottom of the laptop.

• HP EliteBook Folio 9470 m: HP EliteBook Folio 9470 m SSD upgrade

  I recently bought a Samsung 500 GB SSD and I want to add this drive to my storage on my HP EliteBook Folio 9470 m. The laptop currently has 256 GB SSD stock on this subject and I would add 500 additional GB. I see that there is a link that I'm missing. Someone at - the share exact would be service in this regard?

  

  Or try this link if the photos are not displayed

  Photos of what I mean on my laptop

  Thanks to you all!

  Hello

  It seems that your computer already has 256 GB storage mSATA. You need 702870-001 for the HDD/SSD kit part number in order to use the HARD drive Bay

  

  You can buy

  http://PartSurfer.HP.com/search.aspx?SearchText=702870-001

  or cheaper:

  https://www.Amazon.com/HP-702870-001-i3-3217U-drive-hardware/DP/B014VUIF7E

  Kind regards.

• EliteBook 8740w: HP elitebook 8740w mobileworkstation

  My HP elitebook 8740w mobileworkstation, continues to give me a message unknown device is not a driver & shows the problem with the PnP devices.  Trying to use my laptop to hook a projector, but it will not mirror or even appear on the screen.  Can anyone help?

  Hello:

  I doubt that this missing driver is the cause of the video problem you are experiencing.

  However, you need the driver for this device.

  This package provides HP 3D DriveGuard to the notebook models and operating systems. HP 3D DriveGuard receives notifications of the built-in accelerometer and protects the hard drive (HDD) by automatically "the heads of parking" to reduce the risk of damage if the laptop is accidentally moved or deleted.

  FTP://ftp.HP.com/pub/SoftPaq/sp53501-54000/sp53795.exe

  As much on the PC do not project onto a screen, the only suggestion I can offer is make sure you have installed the driver of graphics for model graphics card that has your laptop.

  There are pilots of 7 cards listed on the support page, so unfortunately, I don't know that you need.

  A missing graphic driver is usually the cause of problems like this.

• M.2 for the elitebook 745 g2 ssd

  Hello

  I would like to know if the WWAN slot (I think it's a PCIE port) in the elitebook 745 g2 (see image) could be used to insert an ssd m2 as extra storage. The only information I have is this forum (http://forum.notebookreview.com/threads/elitebook-700-series-elitebook-725-g2-elitebook-745-g2-and-e... where it says that this operation would be that the system recognizes not the module.) Can someone confirm that your experience?

  It's a shame I can't use this location for that purpose. Is there a way around the problem?

  

  Thanks in advance for your help

  Please see HP EliteBook 745 G2 HP Notebook PC and PC portable G2 EliteBook 755 - Maintenance and Service of Guidefor more information on this model. Based on the MSG, it does not appear that the WWAN slot will support an SSD m2.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• HP Elitebook 8470w/display screen does not

  Hello

  We have a 8470w (XT908UT) computer laptop Elitebook with the screen on the laptop does not.

  Do us get the display on an external monitor but not on the laptop to display itself.

  Check the display settings of the control panel and Device Manager, the external screen is present while the computer screen is not.

  We have unplugged every unnecessary internal element for display (same HDD, keyboard and trackpad)), problem persists

  We changed 2 motherboards, 2 screens and card 1 gfx. Still the same problem persists.

  Can anyone help?

  Thanks in advance.

  After some research in the service manual and hp partsurfer.

  It seems that we have received a gfx NVIDIA instead of one card

  Gfx ATI card. The service manual says its compatible but not. Partsufer mentions only the gfx ATI card when the laptop

  PartNumber is submitted.

  the display is now correct.

  hope this helps future display troubleshooting.

• HP EliteBook 8470P: simple exchange of ssd with hard disk?

  I just bought a 1 t Samsung SSD 850 EVO 2.5 "SATA drive III to replace the hard drive in my Elitebook 8470P. Is that going to be just a simple swap where I remove the old hdd and plug the new ssd? That was the plan, but I have been wrong before passing.

  I have 2 images of system backup if necessary.  I disabled the auto Defrag in my security software. I am completely new to ssd and would have had to ask this before I dropped a bundle on one, but it is what it is. Any help is appreciated.

  Hello

  It is possible and I hope that your backup image is appropriate.

  Kind regards.

• EliteBook 8560w: startup stops at the HP logo

  EliteBook 8560w, 8 MB ram, Intel i5 - 2540M to 2.6 Ghz, AMD over-pants M5950

  Computer was working fine without any problems. Windows Update, now stuck on startup with HP logo on the screen and the text "press the ESC key for startup menu '.

  • ESC key does nothing.
  • Removed the battery, held on substantive residual load lost power button
  • Holding F9 or F11 at startup does nothing.
  • Win7 32 disk turns but will not start.

  Which exhausts my troubleshooting led by Google, any ideas out there?

  Thank you

  Ken

  Try to get the hard drive to see if you can get into the BIOS with F10. If that gets you more far, he can point to hdd bad start to stop.

• HP Elitebook 9480 m: HP Elitebook 9480 m can support disk HARD 1 TB 9.5 mm (height)?

  Dear support,

  I have just bougth HP Elitebook 9480 m which has 180 GB of SSD. I want to upgrade to HDD 1 TB 9.5 mm (height). I have just replace SSD with my old HARD 80 GB drive.  But he can't close the back cover (disk, back cover). The system can detect my new HARD drive.

  I was wondering, my laptop can support HDD normal 9.5 mm (height).

  Can you give me a suggestion?

  Thank you.

  Hello

  Page #39 his manual, looks ONLY 7 mm HDD suported. In theorey, it can support 9.5 mm HARD drive, BUT as you can see, 9.5 mm HARD drive will not fit.

  Kind regards.

• Upgrading processors EliteBook?

  Hey guys' no lags.

  I recently bought a 8770p Elitebook.

  Specifications are

  Chipset mobile Intel QM57 Express, 4 GB RAM, 500 gb HDD, i7 840QM clocked at 1.73 ghz, Intel HD Graphics (GMA) with Nvidia MVS 3100 M.

  Here my question, I want to be able to play better games on this subject, because the processor is not enough powerful im all for the upgrade it but the graphics car is low incredilbly and is integrated (unfortunately). I was able to upgrade the processor and get a more powerful integrated graphics with her card, or am I stuck with it? The RAM can be upgraded to 8 GB so some decent graphics and that would be really sweet. Im not talking bf4 on ultra chart either, just good enough to play some mid level games as Outlast and Dayz.

  Thank you!

  He is a 8440p... 14-inch screen.

  Here is the Service Manual:

  Manual

  You already have the top processor and the laptop can come as a discrete or UMA. There is also a workstation with a slightly more powerful graphics card version. See Page 4-50. None has an MXM video card slot. You could theoretically install the card mother 8440w and have a 512 meg graphics card, Nvidia N10M-GLM, but if you already have the nVidia graphics, the difference between the discreet 8440p and the graphic workstation is negligible. These video cards are for works of civil engineering such as CAD and design in 3D and not for games even if they will be better than an Intel HD3000 game of course. I can't find the motherboard of 8440w on HP site or eBay but much advice discrete 8440p is available on eBay. If you actually have the UMA (Intel only) then your only way to improve video performance is to buy and install the motherboard dedicated graphics processor.

  There is info on the graphics card from nVidia available on 8440 series:

  http://www.nvidia.com/object/product_quadro_fx_380_m_us.html

  http://www.notebookcheck.NET/NVIDIA-Quadro-FX-380M.24737.0.html

  This is an entry level graphics card workstation. What they correspond to the Geforce 310 M, which is at the level of the very bottom of the discrete video cards. This article (above) indicates that the drivers used for the use of the workstation could actually hamper performance of game, so you can see if you can get a consumer game driver type to work for you.

  If it's 'the Answer' please click on 'Accept as SOlution' to help others find it.

• Maximum supported size of HARD drive for HP Elitebook 8440p Windows 7 Pro 64 bit runing

  Hello, I just bought a HP Elitebook 8440p "off lease" of Tigerdirect and seeks to upgrade the two memory (from 4 GB to 8 GB) and put in the eligible of the biggest HARD drive I can. Either a 512 GB SSD or a 1 TB WD hybrid WD BLACK2 (1 TB HDD / 120 GB SSD Combo drive in a single package!). I would like to see more large disk addressable by using Windows 7 Pro 64 Bit OS since I don't seem able to find this info on the web. HP offers only only a 256 GB SSD in its specifications. but I didn't know if it was do limitations of BIOS or availability at the time of production, even for the HARD drive to 512 GB.

  Also, I would like to know if 9.5 mm compliant Bay that it needs to be for the WD drive. Can't find that either, and while the new laptop has not yet happen, all measure exactly the same way regarding what works and what simply cannot be "cheated".

  Thank you for taking the time to read this and NO information to that effect would be Greatl appreciated!

  Essentially the reason why you do not have a maximum size of hard drive is because there is not everything. Between SATA and 64-bit OS', worrying about maximum size of hard drive is a thing of the past. Are the biggest readers found in the manual, as you suspected him, just a function of the market at the time of manufacture. It was a few years ago now, it is so understandable that the offerings were "at the time" more thin than now.

  Here is the Service Manual:

  Manual

  Page 4-9 shows the procedure of the Bay and the replacement of the hard disk. The Bay is made for a 9.5 mm thickness 2.5-inch wide SATA hard but the new 7 mm readers also works. The black hybrid drive requires some software (included in the package) to treat the two drives in Windows and I read a modest amount of disappointment in the documentation about them. If you can afford the 512 GB SSD go in this direction and you will not be sorry. I use a Samsung 840 Evo and it has worked perfectly for me for almost 2 years and the most recent 850 I hear is even better.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.