Embeded Web Server is not responding

Similar Questions

• HP Officejet Pro 8500 Plus - embedded Web server 192.168.0.183 does not more open...

  All of a sudden my built-in web server opens not more... not one of my computers. Firewall disabled on PC.

  "This web page is not available.

  What can be wrong?

  Go with 192.168.0.179... It's good to go on the top end, so nothing else it will use!

• Windows SP1 - "the server has not responded.

  Hello!

  I perform a clean installation on the machine of my old mother. In fact, service of the only operation I can install is Windows XP Pro. I downloaded the sp1aexpress_usa.exe file to automatically perform the update.

  After a few checks performed by the program, he prepared to download the Service Pack 1 files. A few seconds/minutes later, the following error message appears: "the server has not responded.

  I spent nearly 3 hours to dig the web to see if I can download SP1 from somewhere within Microsoft, without a bit of luck. Is it possible to upgrade correctly from this machine to SP1 - SP2 - SP3 and thus now or should I format the computer once more and try an operating system open source?

  Thanks for your time

  Pablo

  SP1 (SP1a) is totally useless. All you need to do is to install SP2 and SP3. For more details:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_install/recovery-CDs-and-XP-Home/3256a8db-F1C1-40f5-A6AC-82f4c3c4266a

• My PC does not connect to the Internet, a window opens and says DNS server does not respond.

  Original title: programs network networking Internet site Internet Site Web Web Site URL of the network

  My PC does not connect to the internet, a window opens and says DNS server does not respond.

  Hello

  Follow the steps in the article mentioned below and check if it solves the problem:
  http://support.Microsoft.com/kb/314095

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• "No access to the network" problem in Windows 7 and error message "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."

  Hello, I have a desktop PC and a laptop (DELL Inspiron N-4050).
  I have problem with my internet connection cable which is working fine on my PC, but does not not on my laptop giving an error "no access to the network.

  When I troubleshoot it says "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."
  I said to many technicians of microsoft online response, but they could not solve my problem and said this is my DNS problem and advised me to contact my Internet service provider. Guess it's because of my internet so why it works on my PC not on laptop?

  Yesterday, my ethernet cable pulled out my cell phone and I couldn't connect to the internet more. But on my desktop PC, it works perfectly fine. (I do not use wifi, if this information is also required) I have studied several threads with similar situations, and I have tried different methods to solve the problem to no avail. I did a system restore, but I'm having no luck. Also, I did not of the latest changes with my anti virus software and my LAN card drivers look to date.

  When I remove my cable from the laptop and again connect my cable then it works but only after the PC sat for awhile.
  1.I did flush DNS by typing "ipconfig/flushdns" in the command prompt.
  2. my IP address, DNS, subnet mask etc are set to automatic.
  3.I also added physical address taken from command line giving "ipconfig/all". for the properties of the network driver settings.
  4.I ' installed the drivers to date of 2014 on my laptop.
  5.I did a lot of searching the web, but they do not solve my problem.

  Please help me to solve it.
  I appreciate your help.
  Thank you.

  Hello Hall,

  Please keep us updated on the status of the issue.

  I suggest you to follow the steps in this Microsoft article troubleshooting and check if it helps:

  Error message "your computer seems to be configured correctly, but the device or resource (DNS server) is not responding" in Windows 7

  http://support.Microsoft.com/kb/2779064/en-us

  Hope the helps of information.

  Please reply with the results, in order to help you solve the problem.

  Thank you

• The DNS server does not respond?

  Often my internet connection fails completely. It connects to any kind of Web site when it arrives. I use the option to "solve problems", and discovered that the DNS server is not responding. So he says. It happens all the time and I can't fix it myself. Can I get some advice? Maybe even a complete solution?

  Hi Jim,.

  Did you of recent changes to the computer?

  I suggest that you try the procedure described in the article below.

  Method 1:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-CA/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2:

  Please refer to suggestions of Vinod gwenaëlle replied on 10 March 2012

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-Windows_7/the-DNS-server-ISN

  Additional information:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-CA/Windows/cant-connect-Internet#1TC=Windows-7

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you

• I am fully connected to the Internet, but my DNS server is not responding. How can I connect otherwise?

  I am fully connected to the Internet, but when I click on my home page and even several other pages, including Windows Live Mail, I get an error message that my DNS server is not responding. How can I work around this problem and to connect to the Internet anyway?

  You want to be sure that you use the right setting for your DNS server.  You can move this in your browser using the digital URL for the what you want to access web sites.  You will find them by using the PING command at the command prompt.  Hold the Windows key and press R.  Then type CMD and press ENTER.  Then enter for example to get the address of the web site of MS PING WWW.MICROSOFT.COM.

  Unless otherwise directed by your Internet service provider, you want TCP/IP settings to "obtain an IP address automatically" and "Obtain DNS server address automatically".  To do this click Start-> Control Panel-> Network Center and sharing-> view status.

  Then click on properties.

  From there, click on Internet Version 6 Protocol and properties.

  Click on the two radio buttons to "obtain an IP address automatically" and "Obtain DNS server address automatically".  Click OK.

  Then click Internet Version 4 Protocol and make the same changes in what concerns the version 6.

  I hope this helps.  Good luck.

  Good luck.

• Safari throws "Safari cannot open page because the server is not responding" error for most relationships other than Facebook, Google, Youtube and a few other sites on my Macbook Pro. Can anyone help?

  Safari throws "Safari cannot open page because the server is not responding" while Chrome throws an error "this site is not reachable, connection timed out" for most relationships other than Facebook, Google, Youtube and a few other sites on my Macbook Pro. Sometimes, however, I am able to get the site on Google and access one page other than the home page and everything on the site works fine afterwards. I use a Macbook Pro OS X El Capitan (10.11.5) running. Can anyone help?

  Test in safe mode, if it works back to the normal mode safe mode start-up to test again.

  Try safe mode if your Mac does not end commissioning - Apple Support

  Let us know if the problem occurs in mode without failure or even once after start in normal mode.

• Network troubleshooting is he diagnosed "your computer is correctly configured, but the device dns server is not responding...". How can I fix it

  I get a lot offline on my laptop. After that I ran the network troubleshooting is diagnosed "your computer is set up correctly, but the device dns server does not respond.  How can I fix this problem please?

  Hello

  1. what operating system is installed on your computer?

  2. are you using wired or Wi - Fi?

  3. you will remember to do recent changes on the computer before this problem?

  I suggest you

  Method 1:

  Empty the Cache DNS (Domain Name System) follow the steps below:

  a. click the Start button.

  (b) in the search box, type command prompt.

  c. in the list of results, right-click command prompt, and then click Run as administrator.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  d. at the command prompt, type ipconfig/flushdns.

  Method 2:

  If the previous step fails, follow these steps and check if the problem persists:

  a. click "Start", enter "NCPA. CPL"(without the quotes) and press ENTER.

  b. right-click on the connection you use for the local connection, and then click "Properties".

  c. Click to select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.

  d. in the Internet Protocol window, we will change the "Preferred DNS server" to 208.67.222.222

  e. click 'OK' twice to complete the change.

  f. If the problem persists, please repeat the steps and change the "Preferred DNS server" to 208.67.220.220.

  Method 3:

  If the previous step fails, follow the steps described in the following link:

  http://support.Microsoft.com/kb/928152

  For more information, check the following links:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• While trying to install SP1a for Windows XP, the error is the following: server has not responded (Windows XP SP1a).

  Hello

  Recently, I reformatted and reinstalled windows XP on my old laptop. Looking to obtain service packs for it, I read that you need to start with SP1a... I did some research autour and many people are having the same problem, but nobody responded to the real problem. According to Microsoft, I install SP1a to install any other. The error is as follows: the server did not respond. If the server has been taken down or refuses connections. My internet connection remained active all attempts to access the server.
  Unless the information is wrong on the website, installation of SP3 won't fix it. All responses I've seen to this problem have been installing something you can't until you install first.
  Here is the link, in that it tries to connect:
  Connection to
  http://xpSP1.Microsoft.com/ISAPI/pstream3.dll/XP/SP1.USA.1106a.
  Here's the exact error:
  "The following error occurred during the installation of the Service Pack 1a attempted to download the files from the Service Pack 1 from the internet:
  The server did not respond. »
  Thank you.

  You should be able to download the Service Packs as a standalone installer at the following addresses:

  SP1a: <> http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=19751 >
  SP2 <> http://www.microsoft.com/download/en/details.aspx?id=28 >
  SP3 <> http://www.microsoft.com/download/en/details.aspx?id=24 >

  If you can not download to your computer, then use another machine to download the installation file and move it to your computer.

  You don't need to install SP1A.  XP Gold, you must install SP1A or SP2 before installing SP3.  I recommend that you start with SP2 and then SP3.

  "How to obtain the latest Service Packs for Windows XP"
    <>http://support.Microsoft.com/kb/322389 >

  HTH,
  JW

• XP5.1 SP1a download "the server has not responded.

  I had to reinstall XP 5.1 and I try to install SP1a.  On the attempt to download - I get the message "the server has not responded.  I have an internet connection - I asked the download from the MS. download site  For some reason machines updates do not work and I need to install SP1a to get to SP3. Location that is not responding is 'HTTP:xpSP1.micrsoft.com/isapi/pstream3.dll/xp/SP1.USA.1106a '.

  THX

  I had to reinstall XP 5.1 and I try to install SP1a.  On the attempt to download - I get the message "the server has not responded.  I have an internet connection - I asked the download from the MS. download site  For some reason machines updates do not work and I need to install SP1a to get to SP3. Location that is not responding is 'HTTP:xpSP1.micrsoft.com/isapi/pstream3.dll/xp/SP1.USA.1106a '.

  THX

  Were you recently doing a Clean Install? I ask because you are implying in your installation of Windows XP is in 'gold' or SP0 (i.e., pre - SP1) level. Well sure, automatic updates will not work!
  You can use this path to level – says in passing:
  Gold XP to XP SP2 to XP SP3.
  Note that installing SP1a is TOTALLY USELESS!
  Here are the detailed instructions:

  1. download the installation of SP2, SP3 and IE8 files. I prefer to keep these on a USB key, but this is optional. Here are the links to all the installation of three files:

  http://www.Microsoft.com/download/en/details.aspx?ID=28 (for SP2)

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  And if you wish, download the Setup file of a good anti-virus program. I recommend Avira free Antivirus:

  http://www.Avira.com/en/Avira-free-antivirus

  2. disconnect Internet.

  3. temporarily disable the automatic updates.

  4. install SP2. Reset.

  5 install the SP3. Reset.

  6 switch to IE8. Restart TWICE.

  7 install an Antivirus software.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  8 make sure that firewall Windows is activated (it should be).

  (Now you can physically reconnect to the Internet.)

  9 visit Windows Update to download and install only the critical security updates.

  10 re - enable automatic updates.

  After the back if you need guidance.

• Server did not respond error when you try to install Service Pack 1 for Windows XP.

  I had to do a restore system with xp home edition. Trying to update from sp1 which has been downloaded to the thumb drive and sent to my office at the top of the page. starts to load, and then tells me that the server did not respond. I am connected

  You do not start with a service pack earlier and go to the top. You only download the latest service pack. The latest service pack for Windows XP Home Edition is Service Pack 3.

  Go to Windows Update and see if you can find it there.

  If this isn't the case, then you can manually download it here:

  http://www.Microsoft.com/download/en/details.aspx?ID=25129

  It is a CD image file that requires you to burn to a CD or use a virtual CD/DVD software like Virtual CloneDrive. This allows you to open the ISO file as if it was a real CD inserted into your DVD drive. All you have to do is double-click the ISO file, once you have installed this program. Run the configuration file.

  http://www.SlySoft.com/en/Virtual-CloneDrive.html

• Get "DDE server window not responding do not" message when computer shutdown

  Tell me why when shut down my PC , I got a "DDE SERVER WINDOW NOT RESPONDING... END message NOW? ' I've never had before, and the only way I could stop my PC was to finish the task.
  I am running Windows XP SP3
  Thank you!

  I uninstalled a program called iLike Sidebar & it seems that the DDE server window does not come up during a re-start and or close. I think it was the cause of it occurring first, because now that I remember I never had it happen before you install the Sidebar iLke. I think it was the cause of the problem, and am keeping an eye on, just in case it happens again. I hope I'm right about my prognosis.

  I thank all those who responded to this question, I had, & if he come again I will adhere to all the suggestions that everyone else does.

  Thank you!!

• The DNS server is not responding.

  Just bought this WRT160N a few days ago, I implemented and no problems now, randomly, I can't the internet to work, every once in awhile, he will work for a few minutes, then it will return new.  When I troubleshoot Windows, I have "the DNS server is not responding" * detected * this computer is located on a wired connection to my router, and is currently the only computer connected to my router.  The connection works fine when I run the cable directly from my modem to the computer (which im doing now) any help would be greatly appreciated!

  To upgrade the firmware of your router, you don't need to be connected to Internet... Just connect the Modem to the computer and download the firmware on your router... Once you have downloaded the firmware on your router... Connect the Modem to the router on the Internet Port and connect the computer to the router Linksys on Port n ° 1... Follow the instructions I mentioned in my previous post, how to upgrade the firmware on your router... Once the firmware is upgraded successfully... Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  If your Internet Service is cable follow this link

  If your Internet Service is DSL follow this link

• I can access the internet but can no longer send or receive mail. I get a message that the POP 3 Server has not responded.

  I can access the internet but can no longer send or receive mail. I get a message that the POP 3 Server has not responded. Nor do the SMPT server. 0x800CCC19 error number is given in both cases. I have no help when I type the error number in the help Windows Mail. How can I solve this problem?

  original title: can't send or receive emails.

  Tools > accounts > select your account > properties > Server tab, ensure that 'Connect with password' is not enabled.

  Or you might want to try the new port settings.
  http://www22.Verizon.com/residentialhelp/highspeed/email/setup+and+use/questionsone/124289.htm