Enable analysis for computer - Communication error

Similar Questions

• HP AIO 7640: Scan-to-computer Envy 7640 means communication error

  Many scan-to-computer malfunction. Start w wireless mode, will have to remove/reinstall the software. Amended in ethernet mode, was fairly reliable (v HP 39.0) later. Printing from Mac & iPhone AirPrint to 7640 is OK. Manual scan from Mac to 7640 OK. Under: HP Utility w / devices /Scan to computer = try to activate the analysis, then the computer Scan is disabled. If check enable scan of the computer, then get communication error. I would like to address this problem, otherwise there are other brands that work.

  Hello @RWGIL,

  It is a great place to get help! I read your post and see that
  I want to help you solve this problem.

  It looks more like a software problem, try the following steps: Scan network connection is lost (Mac).

  Should help to repair disk permissions and reset the printing system.

  You can click on the "accept as a Solution" If the problem is resolved and the 'Thumbs Up' for my effort. Please hold me. Good luck!

• OfficeJet 5740: officejet 5740 - scan of the computer cannot be activated - cause communication error

  2 weeks ago, I bought a HP officejet 5740 - installed the software and everything worked well. Unfortunately, the printer is dead, and I just got a new.  In order to start to 'clean up', I removed all HP on the Mac software - and then installed the printer. I can print - and scan using progtram analysis. The printer is connect via ethernet.

  This left me with 2 numbers

  (1) for installation, Setup fails when I reached the setting of alerts (communication error - please restart the program) try to configure alerts in HP utility fail - even once to the criticism fail - restart program

  (2) I'm not able to activate the scan of the computer on the Mac.  I get "communication failed" when I try to turn on the feature in HP utillity

  What I tried

  Delete all HP software (several times) and reinstall it again - still the same problem

  I removed the HP software and used the diskutillity to fix the rights - and reinstalled him brand new - still same problem.

  I have reset the printingsystem on the mac - still the same problem

  I still think it's weird - because everything worked great with the first printer I had! -replace it with a similar one caused the problem.  And this isn't the printer - because scan to computer works with my wife PC

  I have run out of ideas - and hopes that someone can solve this problem!

  Carsten

  Thank you for your reply - the problem is now resolved.  It seems that when you run Uninstall HP also something with the printerdrives provided by Apple update. I noticed that version 3.1 was installed on March 2, when I installed the first printer, I bought (the one who broke down) in all my tests, uninstalling and installing the drivers, I have checked apple update, it says no new updates, but last night he said suddenly that there was an update and then it reienstalled the 3.1 drivers HP again - and surpirice the problem has been solved.

  Thank you for your quick response!

  Carsten

• Cannot install my printer/error message-unable to create the object print dell v505, that the printer is not compatible with a polcy enabled on your computer that blocks NT 4.0 drivers (1930)

  Original title: cannot install my printer error message

  I am trying to install my printer to dell v505 from the factory disc and get this error message: failed to create the object print dell v505 printer is not compatible with a polcy enabled on your computer that blocks NT 4.0 drivers (1930)

  Any help, need a lot.

  Hello

   
  1. what version of Windows are you using?
  2 did you the chnages in the computer before this problem?
   
  I would suggest trying the following methods and check.
   
  Method 1: Run the fix, install the printer and check
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
   
  Method 2:
  Error message when you try to connect to a printer in Windows Vista: "the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.
  http://support.Microsoft.com/kb/931719
  Method 3: Install the printer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.
  http://support.Microsoft.com/kb/929135
  Note: Please, go to step 7 of the Kb to maintain the computer to normal startup.
   
  You can download the latest driver for your printer from the link below.
  http://www.Dell.com/support/drivers/us/en/04
   
   
  You can also check:
  Printer driver is not Compatible if a policy is enabled on your computer.
  http://support.Microsoft.com/kb/282011
   
  Error message when you try to connect to a printer in Windows Vista: "the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.
  http://support.Microsoft.com/kb/931719

• communication error with the server. callback failed for the data entry page

  Hello
  
  We have recently applied the corrective update EMP on EMP 11.1.2.0 111.2.1.
  We have following the architecture,
  
  database server: sql server 2005
  Server Foundation (OS = windows server 2008): HSS, EPMA, Manager Calc, EAS, EIS, provider's server, planning
  Essbase Server (OS = windows server 2008): essbase
  
  After you apply the patching EMP 11.1.2.1, we apply after Electrodes for IE 9 compactibility i.e EMP 11.1.2.1.600 patches
  
  1. patch 14119724 (Workspace)
  2 14142678 patch (Shared services)
  3 patch 14224664 (EPMA)
  4 patch 14464109 (planning)
  
  After you apply above patches, all users get error when opening planning web form through the workspace of all client computer.
  
  "* error communication with the server. callback failed for the data entry page. "
  
  
  
  
  When restore us only planning patch 14464109 , issue of "communication error with the server. callback failed for the data entry page "get resolved for all users, but failed for a single user IE"user xyz" "
  
  the user xyz have OS = windows 7 and IE 8
  user xyz can take foundation server RDP can open any form of planning successfully in vain get when doing the basic machine.
  
  I have following question:
  1. Why do we get error "error communicating with the server. callback failed for the data entry page"after you apply the fixes to IE9
  
  2. after cancellation all patches or planning one patch, why the user xyz always get the error but not other users
  
  
  Thanks in advance
  
  Published by: 922755 on June 7, 2013 16:08

  It might be useful to have a read of the following doc Oracle Support - "error:"error Communication with the server. " "Callback failed for the data entry page" when you open a Web form of planning with the members of the Type of text [ID 1392689.1].

  And then this question should be resolved en.600

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• updated computer then error 'WindowsUpdate_80072EFE' always rises, if that had for months now__and the update itself is "WindowsUpdate_dt000".

  updated computer then error 'WindowsUpdate_80072EFE' always comes if it had for months
  and the update itself is "WindowsUpdate_dt000" Please help me! :)

  Which edition of Windows and what level of Service Pack is now on?

  IF it is Vista or Windows 7, open a command prompt
  Click the start ORB, type cmd in the search box
  Under programs, click on cmd.exe and select 'run as administrator '.
  If a password is used to enter it and then click OK. If no p/w is used, click on the button continue
  At the command prompt type the following and press enter

  netsh winhttp see power of Attorney

  If there is a proxy used then it will show slot next to Server Proxy (s)

  Current WinHTTP Proxy settings:
  Server proxy (s):

  To remove the Proxy Server, at the prompt, type in the following and press enter

  netsh winhttp reset proxy

  Now type exit, press ENTER to close the command prompt.
  See if the system can update now.

  Proxy is sometimes used if a suite of security or the 3rd party firewall (not the native firewall on Vista/Win7) is installed or if the installed antivirus is configured to analyze incoming e-mails.

  MowGreen Services consumer safety update

• How to download MicrosoftFixit50202.msi of the flash player for my not more long computer work - error 0 x 80070002

  How to download MicrosoftFixit50202.msi of the flash player for my not more long computer work - error 0 x 80070002.   I found the site for download fixit, but I have no desktop feature other than the startup repair options.  I thot I could download fixit from my flash drive solution, but I can't find a command prompt to access.  It is the only page from command prompt I can find... I'm in x:\windows\system32\cmd.exe trying to find the good order for my location flashdrive G:

  I used to go G and get G but it says only that go and get are not internal or external commands and not an executable program or batch file

  HELLLLLLLPPPPPPP!   Thank you!

  x:\ I do not think it is a 'valid' for what you intend. I used a 2nd computer and the original disk, I don't remember tho if I used windows file transfer or just copy, but I had the disc copied to the flash drive and reinstalled windows 7. I have still no working dvd rom (x 2) they open and close (sometimes), but the drivers need to be mounted to something incomplete. repair is absent as well. some other problems too but its been executed in this way for months (apx5). here and there, I get an email from answers, that's how I arived here really (enroute) hope this helps (a bit)

• I'm trying to install updates for computer that are recommended, but they are for Windows Vista and I'm now running Windows 7 and receive errors. How can I fix it?

  I'm trying to install updates for computer that are recommended, but they are for Windows Vista and I'm now running Windows 7 and receive errors. How can I fix it?

  Hi Barcini,

  ·        This error message do you receive when you try to install updates?

  ·        What updates are you inviting to install?

  You can run the Windows Update Troubleshooter & check if the problem persists.

  Open the Windows Update troubleshooting tool

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• A problem is preventing Windows from accurately checking the license for this computer. Error code: 0 x 80090006

  A problem is preventing Windows from accurately checking the license for this computer. Error code: 0 x 80090006

  Error comes when you try to connect.

  -able to login in safe mode

  -J' tried regsvr32 regwizc.dll, regsvr32 licdll.dll from start-> run

  -Tried system restore

  Any other solution?

  Hello

  • What were the changes made before the issue started?
  You can check this link:
  You may receive error code 0 x 80004005 and other error codes when you try to start a Windows XP-based computer
  http://support.Microsoft.com/kb/914232

• I have to shoot for the repair of logmein. My computer application errors a crashes and I can not remove features of logmein.

  As the title explains, I fell for the service repair errors.  They were in my computer for 8 hours.  I cancelled the service, but my computer doesn't work right since the.  I found a logmeinprinter and cannot back up my computer.  Error code 10010, 7000,7009,6008,3013,4104.  Code 0x800700AA and 0x8007001F another failure of the backup.  Another event: the hash map cannot be updated.  Systemindexlog.  I'm trying to figure the comexp.msc, but I don't know who to allow.  East access remotely on a single line.  Please, if anyone can help with 1 or all, Please HELP.

  Hello

  NEVER give anyone a remote access to your computer

  that your system has been compromised, I suggest that you change your information of credit cards and banking passwords and reinstall the operating system

  they wanted or money on your part for programs without value or make an identity theft on you to get even more money and get your internet banking passwords and credit card by obtaining information allows you to download the software to 'fix' or 'test' for your computer or install via remote access

  read this:

  http://www.Microsoft.com/security/online-privacy/msName.aspx

  Microsoft has none of the unsolicited telephone calls to help you fix your computer

  In this type of scam cybercriminals are calling you and claim to be of Support technique Microsoft. They offer help with your computer problems. Once scammers have earned your trust, they try to steal and damage your computer with malicious software, including viruses and spyware.

  Although the law enforcement can trace phone numbers, often authors use pay telephones, disposable cell phones or stolen cellular phone numbers. Better avoid fooling themselves rather than try to repair the damage afterwards.

  Treat all unsolicited sceptically telephone calls. Don't provide personal information.

  If you receive an unsolicited call from someone who claims to be from Technical Support Microsoft, hang up. We do not have such calls.

  If you are a victim of fraud, you can report it. For more information, see: what to do if you think you have been scammed.

  ___________________________________________________________

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Windows could not start the IKE and Authip IPsec keying service modules on the local computer. Error 1075 the dependency service does not exist or has been marked for deletion.

  Hi, I'm trying start the IKE and AUTHOP service from the SERVICES screen but I get this error:

  Windows could not start the IKE and Authip IPsec keying service modules on the local computer.  Error 1075 the dependency service does not exist or has been marked for deletion.

  original title: ike and authip error 1075 the dependency service does not exist or has been marked for deletion

  Hello

  Remember to make changes to the computer before the show?

  You can follow the below methods:

  Method 1: Restart Windows and try to start the Security Center service.

  If you still receive the same error, make sure that the WMI service is launched and running:

  (a) click Start, run , and then type Services.msc

  (b) double-click Windows Management Instrumentation

  (c) set its startup type to Automatic

  (d) click Start to start the service, and then click OK

  (e) restart Windows.

  Method 2: Restart the service

  Windows logs an error if the service IKE and AuthIP IPsec Keying Modules or the driver does not start, or suddenly, they end.

  To restart the IKE and AuthIP IPsec Keying Modules service:

  To perform this procedure, you must have membership in the local Administrators group, or must you have been delegated the appropriate authority.

  (a) restart the service. You can do this from a command prompt or in the snap-snap-in Services Microsoft Management Console (MMC). Do one of the following:

  ·         Start an administrative command prompt. Click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. At the command prompt, run the command net start ikeext.

  ·         Click Start, type services.msc in the Search box and press ENTER. In the column name of the Services snap-in, right-click on IKE and AuthIP IPsec Keying Modulesand then click Start.

  (b) if the attempt to restart the service fails, restart the computer. This forces all related and dependent services to restart.

  (c) if the error persists after restarting the computer, then the executable files for the driver or service may be damaged, and the operating system must be reinstalled.

  Note:

  You can check that the IKE and AuthIP IPsec Keying Modules (IKEEXT) service runs by using the Component Services Microsoft Management Console (MMC) or the net start command line tool.

  You can check the link: http://technet.microsoft.com/en-us/library/cc733299 (WS.10) .aspx

  Method 3: Run a scan of the System File Checker.

  http://support.Microsoft.com/kb/929833

  It will be useful.

• Fix for Crypt32.dll error on a computer running XP SP3

  Where can I download a fix for computer running on professional 64 bit XP SP2

  Hello StefanoGrossi,

  As your particular case involves a server environment, I would recommend that you communicate with TechNet with this question:

  http://social.technet.Microsoft.com/forums/en-us/categories

  Best regards

  Matthew_Ha

• I got a new computer, my photoshop Cs wants to activate me, its already been activated on the old computer. How to enable it for this computer?

  I got a new computer. I installed my photoshop and he wants me to activate. It has been activated on my old computer. How to enable on this computer?

  Well Yes, it applies to CS 1.

  In this case, you will need to download and install version CS 2, and you must use the serial number indicated on the Web page.

  Download Acrobat 7 and CS2 products

• communication error occurred when the power VI

  Hi all

  I have a frustrating situation.  I am trying to run a few screws on a Compact RIO 9073 chassis, and each time I start or stop the VI, I get two pop-up windows: "Communication Error occurred" (spelling is like on the popup) follow-up by ' WARNING: connection to the target in time real (NOR-cRIO9073 blah blah) has been lost.

  If I then go to the project manager, right-click on the cRIO and select Connect, it connects again very well, and the VI is still running.  I then two same popups again when the VI stops.  In the meantime, I can communicate with the VI without any problem.  I tried to reinstall the software on the RIO to the but minimal, OR RIO 3.4.0 it did not help.

  The RIO I NI-VISA and Visa 4.6 LabVIEW time server real 9.0.1 and NOR-RIO 3.4.0.  Same numbers on the computer except that real-time is 9.0.0.

  Any suggestions would be greatly appreciated!

  See you soon,.

  ~ Ben

  : sigh:

  Never mind, I noticed myself when I realized that my RT versions differed.  (Seems that naming scheme would require a little tweaking si.0.1 is quite different for breaking things...).

  Not sure how I managed to get a version more recent of RT on the box as on the pc, but good.

• Ventrilo in world of warcraft runnig vista__Unable to enable DirectSound for some device.__DirectSoundCaptureCreate failed. HR = DSERR_NODRIVER. No sound driver is available for use

  My ventrilo was working fine two months ago, but now for some reason any gives me these errors, "unable to enable DirectSound for the selected device.
  DirectSoundCaptureCreate failed. HR = DSERR_NODRIVER. No sound driver is available for use. On my other computer samething but different error message that reads, "cannot open the input device. Another program, it may have already. RC = - 10"

  Event. worked fine on both computers. have updated and rolled back all the audio drivers, uninstalled event. and reinstalled. What continues?

  I have finnally got the answer that it must be run as administater. For the Horde!