enable ICMP on cisco acs1120
Hi all
We have downgraded cisco device acs ACS 5.0 to ACS 4.2.1.15 1120, when we demand ICMP ping to the device of GBA his does not, but I do test ping device acs console mode not the GUI mode.
Y at - it an option to enable ICMP Ping response on cisco acs 1120. otherwise a patch to upgrade to run this action, my requirement is to enable ICMP ping on acs device for troubleshooting. Instead, always check with telnet x.x.x.x 2002 for service responds
Hi Santosh,
The pathc available on the download page of cisco.com.
The path is the following:
www.Cisco.com > support > download software > Products > Security > Identity Management > Cisco Secure Access Control Server Solution Engine > Cisco Secure Access Control Server Solution engine 4.2 > Secure Access Control Server (ACS) Solution engine > 4.2.0.124.
the fixes are:
appl_Acs4.x_PingTurnOff_With_CSAgentUpdate_1_Patch.zip
appl_Acs4.x_PingTurnOn_With_CSAgentUpdate_1_Patch.zip
You'll need software valid contract of download to download the patches.
I hope this helps.
Kind regards
Anisha
P.S.: Please mark this thread as answered if you feel that your query is resolved. Note the useful messages.
Tags: Cisco Security
Similar Questions
-
AAA to circumvent the password to enable on the Cisco ASA
Hi all. I'm having a problem where I get authenticated by the AAA server, but after authentication, that I am placed in user mode. AAA admin (I have no access to the AAA server) told me that he had all the users configured with priv level 15, which will lead them directly in the mode privilege on routers.
My question is how can I configure my Cisco ASA to get around using a password to enable. See below the configuration of my
AAA-server protocol Ganymede MYGROUP +.
Max - a failed attempts 4
AAA-server host 2.2.2.2 MYGROUP (inside)
timeout 3
key *.
Console Telnet AAA authentication LOCAL MYGROUP
Console to enable AAA authentication LOCAL MYGROUP
privilege MYGROUP 15 AAA accounting commandLooks like you want to directly access the exec privileges mode. This feature is not supported by the ASA. This is only possible on IOS devices.
Rgds, jousset
Note the useful questions.
-
Dear team,
I have a Cisco asa firewall, I would enable remote vpn (ssl vpn or customer).
Please check the joint view version and suggest which are missing or need to enable them.
Therefore, I will obtain concrete results and enable VPN.
concerning
SecIT
With the license and the software version you have, you can only run the existing IPsec VPN client.
To run AnyConnect SSL VPN client-based, you must acquire a license AnyConnect Essentials. For your platform that would be L-ASA-AC-E -5550=. (Clientless SSL VPN would be a different reference number.)
I also suggest upgrading your system beyond 8.2 software (2) the current recommended release would be 9.0 (3). (9.1 (5) is the last on the 5550.)
-
I have more than 20 SF 300 - 24 p 10/100 switches managed switch deployed and running in my business network. All these switches have activated the web configuration utility. We want to activate telnet too. But for this I know I have to visit a site, connect the switch manually with a laptop computer and enable the telnet option.
I'm looking for how can I activate telnet in these swithches using the switch web-based configuration utility.
Can someone please help...
Wrong forum, try it ' small business - switches. You can move your message by using the panle to Actions on the right.
-
Cisco IOS device - password enable
Y at - there a trick to getting the password to enable working on Cisco's IOS device?
I created my first workflow to connect to a Cisco IOS device recently and initially could not do the work of enable mode.
Using activity "Send commands to the Interface", I run the command "enable."
From there on, the activity times out.
The goal is to use the Cisco IOS expect model, I noticed the option 'raising command privilege '.
How is it used? Should expect model automatically detect the order of lifting and then use awaits below?
If so, it doesn't seem to work.
The only way I could make it work was to add my own manual expect activity "send commands to the Interface. I used the targets 'Elevation of privilege command' variable reference as await them and sent the password for admin users in response.
It is to open the model waiting for you to use an order of elevation. If you select not those expect the models and you run an 'enable' command and you command prompt, turned to the sign ' # ', then it would not be all wait would expire models and additional orders and not work.
-shaun
-
Cisco forwarding port does not
Dear experts, I got a production Firewall (Cisco Pix 515e 6.3 (1)) and I have set up to allow access to the outside on a server (SSH only).
The server is 10.0.5.200.
External IP is a.b.c.d. (should I use the FW outside the IP address of the interface?)
Here's the sanitized output:
6.3 (1) version PIX
interface ethernet0 100full
interface ethernet1 100full
Auto interface ethernet2
interface ethernet3 100full
Automatic stop of interface ethernet4
Automatic stop of interface ethernet5
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
nameif ethernet2 provider interieure4
nameif dmz security99 ethernet3
nameif ethernet4 intf4 security8
ethernet5 intf5 security10 nameif
activate the encrypted password of XXXXXXXXXXXXXXXX
passwd encrypted XXXXXXXXXXXXXXXXXX
IP address outside a.b.c.d 255.255.255.240
IP address inside 10.0.1.254 255.255.255.0
provider address IP X.X.X.X 255.255.255.0
dmz X.X.X.X 255.255.255.0 IP address
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0 access-list sheep
NAT (inside) 1 10.0.1.0 255.255.255.0 0 0
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
RADIUS Protocol RADIUS AAA server
AAA-server local LOCAL Protocol
the ssh LOCAL console AAA authentication
NTP server 192.43.244.18 prefer external source
NTP server 128.102.16.2 source outdoors
Enable http server
6.3 (1) version PIX
interface ethernet0 100full
interface ethernet1 100full
Auto interface ethernet2
interface ethernet3 100full
Automatic stop of interface ethernet4
Automatic stop of interface ethernet5
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
nameif ethernet2 provider interieure4
nameif dmz security99 ethernet3
nameif ethernet4 intf4 security8
ethernet5 intf5 security10 nameif
activate pnxJXWf9kU.x7YfY encrypted password
WL6KtWnsAjAQS2yI encrypted passwd
outside_access_in ip access list allow a whole
access list outside-access enable icmp a whole
access-list DMZ_access_in allow icmp a whole
IP address outside a.b.c.d 255.255.255.240
IP address inside 10.0.1.254 255.255.255.0
provider address IP X.X.X.X 255.255.255.0
dmz X.X.X.X 255.255.255.0 IP addressARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0 access-list sheep
NAT (inside) 1 10.0.1.0 255.255.255.0 0 0Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
RADIUS Protocol RADIUS AAA server
AAA-server local LOCAL Protocol
the ssh LOCAL console AAA authentication
NTP server 192.43.244.18 prefer external source
NTP server 128.102.16.2 source outdoors
Enable http serverThose in bold are the commands that I added:
static (inside, outside) tcp a.b.c.d 2022 10.0.5.200 ssh netmask 255.255.255.255 0.0
access-list 100 permit tcp any host a.b.c.d eq 2022
Allow Access - list 101 tcp 10.0.5.200 eq 22 a
Access-group 100 in external interface
Access-group 101 in the interface inside
When you access from the Wan, I used putty SSH port 2022 a.b.c.d IP in and he gave me of waiting times. I used the:
Capture interface capo outside access-group 100
The results were (that I can remember that I am not on site):
My WAN IP-> a.b.c.d (R)
My WAN IP-> a.b.c.d (S)
My WAN IP-> a.b.c.d (S)
My WAN IP-> a.b.c.d (S)
The server on the internal LAN access is great and I can access port 22 on the server on the local network (Note: there is a L3 switch in the environment and inside the IP segments are 10.0.1.0/24 and 10.0.5.0/24 routable both.)
This is what I did so far and would like more ideas on this subject that I am currently facing to. thanks!
Hello
Configuring static PAT (Port Forward) seemed correct to me.
If you use the IP address of ' outside ' interface you would generally configure the parameter "interface" , and not the IP address.
public static interface 2022 22 netmask 255.255.255.255 tcp (indoor, outdoor) 10.0.5.200
Of course if you can/want to save a public IP address for this server only you could configure static NAT
public static 10.0.5.200 (inside, outside) subnet mask 255.255.255.255
That would bind essentially those 2 IP addresses, and you can allow services that are needed for the current server. Naturally, you will also need to allow traffic in the external ACL to the new public IP address.
But it should also work with your configurations. If you want to use the IP address or a separate public IP's to you.
If you are missing the 'road' to the 10.0.5.0/24 subnet in your PIX configuration so it is an obvious problem in why the server is inaccessible from the Internet. So, I would start by adding the "itinerary" necessary and retest. If it does not then would be good to verify that the routing between the server and the PIX is fine. For example, there is a route to the PIX server, and the server has a default route takes traffic to the PIX.
Hope this helps
-Jouni
-
Cisco ipsec Vpn connects but cannot communicate with lan
I have a version of cisco 1921 15.2 (4) M3 I install vpn ipsec and may have customers to connect but cannot ping anything inside. A glimpse of what could be wrong with my config would be greatly appreciated. I posted the configuration as well as running a few outings of ipsec. I also tried with multiple operating systems using cisco vpn client and shrewsoft. I am able to connect to the other VPN ipsec running 1921 both of these computers by using a client.
Thanks for any assistance
SH run
!
AAA new-model
!
!
AAA authentication login radius_auth local radius group
connection of AAA VPN_AUTHEN group local RADIUS authentication
AAA authorization network_vpn_author LAN
!
!
!
!
!
AAA - the id of the joint session
clock timezone PST - 8 0
clock to summer time recurring PST
!
no ip source route
decline of the IP options
IP cef
!
!
!
!
!
!
no ip bootp Server
no ip domain search
domain IP XXX.local
inspect the high IP 3000 max-incomplete
inspect the low IP 2800 max-incomplete
IP inspect a low minute 2800
IP inspect a high minute 3000
inspect the IP icmp SDM_LOW name
inspect the IP name SDM_LOW esmtp
inspect the tcp IP SDM_LOW name
inspect the IP udp SDM_LOW name
IP inspect name SDM_LOW ssh
No ipv6 cef
!
Authenticated MultiLink bundle-name Panel
!
!
Crypto pki trustpoint TP-self-signed-2909270577
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 2909270577
revocation checking no
rsakeypair TP-self-signed-2909270577
!
!
TP-self-signed-2909270577 crypto pki certificate chain
certificate self-signed 01
license udi pid CISCO1921/K9 sn FTX1715818R
!
!
Archives
The config log
Enable logging
size of logging 1000
notify the contenttype in clear syslog
the ADMIN_HOSTS object-group network
71.X.X.X 71.X.X.X range
!
name of user name1 secret privilege 15 4 XXXXXXX!
redundancy
!
!
!
!
!
property intellectual ssh time 60
property intellectual ssh authentication-2 retries
property intellectual ssh event logging
property intellectual ssh version 2
!
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
!
ISAKMP crypto client configuration group roaming_vpn
key XXXXX
DNS 192.168.10.10 10.1.1.1
XXX.local field
pool VPN_POOL_1
ACL client_vpn_traffic
netmask 255.255.255.0
!
!
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
tunnel mode
!
!
!
crypto dynamic-map VPN_DYNMAP_1 1
Set the security association idle time 1800
game of transformation-ESP-3DES-SHA
market arriere-route
!
!
list of authentication of card crypto SDM_CMAP_1 client VPN_AUTHEN
map SDM_CMAP_1 isakmp authorization list network_vpn_author crypto
client configuration address map SDM_CMAP_1 crypto answer
map SDM_CMAP_1 65535-isakmp dynamic VPN_DYNMAP_1 ipsec crypto
!
!
!
!
!
the Embedded-Service-Engine0/0 interface
no ip address
Shutdown
!
interface GigabitEthernet0/0
IP 76.W.E.R 255.255.255.248
IP access-group ATT_Outside_In in
no ip redirection
no ip unreachable
no ip proxy-arp
NAT outside IP
inspect the SDM_LOW over IP
IP virtual-reassembly in
load-interval 30
automatic duplex
automatic speed
No cdp enable
No mop enabled
map SDM_CMAP_1 crypto
!
interface GigabitEthernet0/1
no ip address
load-interval 30
automatic duplex
automatic speed
!
interface GigabitEthernet0/1.10
encapsulation dot1Q 1 native
IP 192.168.10.1 255.255.255.0
no ip redirection
no ip unreachable
no ip proxy-arp
property intellectual accounting-access violations
IP nat inside
IP virtual-reassembly in
!
interface GigabitEthernet0/1.100
encapsulation dot1Q 100
10.1.1.254 IP address 255.255.255.0
no ip redirection
no ip unreachable
no ip proxy-arp
IP nat inside
IP virtual-reassembly in
!
interface GigabitEthernet0/1,200
encapsulation dot1Q 200
IP 10.1.2.254 255.255.255.0
no ip redirection
no ip unreachable
no ip proxy-arp
IP nat inside
IP virtual-reassembly in
IP tcp adjust-mss 1452
!
local IP VPN_POOL_1 192.168.168.193 pool 192.168.168.254
IP forward-Protocol ND
!
IP http server
IP http authentication aaa-authentication of connection ADMIN_AUTHEN
IP http secure server
IP http timeout policy slowed down 60 life 86400 request 10000
!
IP nat inside source map route ATT_NAT_LIST interface GigabitEthernet0/0 overload
IP nat inside source static tcp 192.168.10.10 25 expandable 25 76.W.E.R
IP nat inside source static tcp 192.168.10.10 80 76.W.E.R 80 extensible
IP nat inside source static tcp 192.168.10.10 76.W.E.R expandable 443 443
IP nat inside source static tcp 192.168.10.10 76.W.E.R expandable 987 987
IP route 0.0.0.0 0.0.0.0 76.W.E.F
!
ATT_Outside_In extended IP access list
permit tcp object-group ADMIN_HOSTS any eq 22
allow any host 76.W.E.R eq www tcp
allow any host 76.W.E.R eq 443 tcp
allow 987 tcp any host 76.W.E.R eq
allow any host 76.W.E.R eq tcp smtp
permit any any icmp echo response
allow icmp a whole
allow udp any any eq isakmp
allow an esp
allow a whole ahp
permit any any eq non500-isakmp udp
deny ip 10.0.0.0 0.255.255.255 everything
deny ip 172.16.0.0 0.15.255.255 all
deny ip 192.168.0.0 0.0.255.255 everything
deny ip 127.0.0.0 0.255.255.255 everything
refuse the ip 255.255.255.255 host everything
refuse the host ip 0.0.0.0 everything
NAT_LIST extended IP access list
IP 10.1.0.0 allow 0.0.255.255 everything
permit ip 192.168.10.0 0.0.0.255 any
deny ip 192.168.10.0 0.0.0.255 192.168.168.192 0.0.0.63
refuse the 10.1.1.0 ip 0.0.0.255 192.168.168.192 0.0.0.63
deny ip 10.1.2.0 0.0.0.255 192.168.168.192 0.0.0.63
client_vpn_traffic extended IP access list
permit ip 192.168.10.0 0.0.0.255 192.168.168.192 0.0.0.63
ip licensing 10.1.1.0 0.0.0.255 192.168.168.192 0.0.0.63
IP 10.1.2.0 allow 0.0.0.255 10.1.1.0 0.0.0.255
!
radius of the IP source-interface GigabitEthernet0/1.10
Logging trap errors
logging source hostname id
logging source-interface GigabitEthernet0/1.10
!
ATT_NAT_LIST allowed 20 route map
corresponds to the IP NAT_LIST
is the interface GigabitEthernet0/0
!
!
SNMP-server community [email protected] / * /! s RO
Server enable SNMP traps snmp authentication linkdown, linkup warmstart cold start
Server enable SNMP traps vrrp
Server SNMP enable transceiver traps all the
Server enable SNMP traps ds1
Enable SNMP-Server intercepts the message-send-call failed remote server failure
Enable SNMP-Server intercepts ATS
Server enable SNMP traps eigrp
Server enable SNMP traps ospf-change of State
Enable SNMP-Server intercepts ospf errors
SNMP Server enable ospf retransmit traps
Server enable SNMP traps ospf lsa
Server enable SNMP traps ospf nssa-trans-changes state cisco-change specific
SNMP server activate interface specific cisco-ospf traps shamlink state change
SNMP Server enable neighbor traps cisco-specific ospf to the State shamlink change
Enable SNMP-Server intercepts specific to cisco ospf errors
SNMP server activate specific cisco ospf retransmit traps
Server enable SNMP traps ospf cisco specific lsa
SNMP server activate license traps
Server enable SNMP traps envmon
traps to enable SNMP-Server ethernet cfm cc mep-top low-mep Dispatcher loop config
Enable SNMP-Server intercepts ethernet cfm overlap missing mep mep-unknown service-up
Server enable SNMP traps auth framework sec-violation
Server enable SNMP traps c3g
entity-sensor threshold traps SNMP-server enable
Server enable SNMP traps adslline
Server enable SNMP traps vdsl2line
Server enable SNMP traps icsudsu
Server enable SNMP traps ISDN call-information
Server enable SNMP traps ISDN layer2
Server enable SNMP traps ISDN chan-not-available
Server enable SNMP traps ISDN ietf
Server enable SNMP traps ds0-busyout
Server enable SNMP traps ds1-loopback
SNMP-Server enable traps energywise
Server enable SNMP traps vstack
SNMP traps enable mac-notification server
Server enable SNMP traps bgp cbgp2
Enable SNMP-Server intercepts isis
Server enable SNMP traps ospfv3-change of State
Enable SNMP-Server intercepts ospfv3 errors
Server enable SNMP traps aaa_server
Server enable SNMP traps atm subif
Server enable SNMP traps cef resources-failure-change of State peer peer-fib-state-change inconsistency
Server enable SNMP traps memory bufferpeak
Server enable SNMP traps cnpd
Server enable SNMP traps config-copy
config SNMP-server enable traps
Server enable SNMP traps config-ctid
entity of traps activate SNMP Server
Server enable SNMP traps fru-ctrl
SNMP traps-policy resources enable server
Server SNMP enable traps-Manager of event
Server enable SNMP traps frames multi-links bundle-incompatibility
SNMP traps-frame relay enable server
Server enable SNMP traps subif frame relay
Server enable SNMP traps hsrp
Server enable SNMP traps ipmulticast
Server enable SNMP traps msdp
Server enable SNMP traps mvpn
Server enable SNMP traps PNDH nhs
Server enable SNMP traps PNDH nhc
Server enable SNMP traps PNDH PSN
Server enable SNMP traps PNDH exceeded quota
Server enable SNMP traps pim neighbor-rp-mapping-change invalid-pim-message of change
Server enable SNMP traps pppoe
Enable SNMP-server holds the CPU threshold
SNMP Server enable rsvp traps
Server enable SNMP traps syslog
Server enable SNMP traps l2tun session
Server enable SNMP traps l2tun pseudowire status
Server enable SNMP traps vtp
Enable SNMP-Server intercepts waas
Server enable SNMP traps ipsla
Server enable SNMP traps bfd
Server enable SNMP traps gdoi gm-early-registration
Server enable SNMP traps gdoi full-save-gm
Server enable SNMP traps gdoi gm-re-register
Server enable SNMP traps gdoi gm - generate a new key-rcvd
Server enable SNMP traps gdoi gm - generate a new key-fail
Server enable SNMP traps gdoi ks - generate a new key-pushed
Enable SNMP traps gdoi gm-incomplete-cfg Server
Enable SNMP-Server intercepts gdoi ks-No.-rsa-keys
Server enable SNMP traps gdoi ks-new-registration
Server enable SNMP traps gdoi ks-reg-complete
Enable SNMP-Server Firewall state of traps
SNMP-Server enable traps ike policy add
Enable SNMP-Server intercepts removal of ike policy
Enable SNMP-Server intercepts start ike tunnel
Enable SNMP-Server intercepts stop ike tunnel
SNMP server activate ipsec cryptomap add traps
SNMP server activate ipsec cryptomap remove traps
SNMP server activate ipsec cryptomap attach traps
SNMP server activate ipsec cryptomap detach traps
Server SNMP traps enable ipsec tunnel beginning
SNMP-Server enable traps stop ipsec tunnel
Enable SNMP-server holds too many associations of ipsec security
Enable SNMP-Server intercepts alarm ethernet cfm
Enable SNMP-Server intercepts rf
Server enable SNMP traps vrfmib vrf - up low-vrf vnet-trunk-up low-trunk-vnet
Server RADIUS dead-criteria life 2
RADIUS-server host 192.168.10.10
Server RADIUS 2 timeout
Server RADIUS XXXXXXX key
!
!
!
control plan
!
!Line con 0
privilege level 15
connection of authentication radius_auth
line to 0
line 2
no activation-character
No exec
preferred no transport
transport of entry all
transport output pad rlogin lapb - your MOP v120 udptn ssh telnet
StopBits 1
line vty 0 4
privilege level 15
connection of authentication radius_auth
entry ssh transport
line vty 5 15
privilege level 15
connection of authentication radius_auth
entry ssh transport
!
Scheduler allocate 20000 1000
NTP-Calendar Update
Server NTP 192.168.10.10
NTP 64.250.229.100 Server
!
endRouter ipsec crypto #sh her
Interface: GigabitEthernet0/0
Tag crypto map: SDM_CMAP_1, local addr 76.W.E.Rprotégé of the vrf: (none)
local ident (addr, mask, prot, port): (0.0.0.0/0.0.0.0/0/0)
Remote ident (addr, mask, prot, port): (192.168.168.213/255.255.255.255/0/0)
current_peer 75.X.X.X port 2642
LICENCE, flags is {}
#pkts program: 1953, #pkts encrypt: 1953, #pkts digest: 1953
#pkts decaps: 1963, #pkts decrypt: 1963, #pkts check: 1963
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
Errors #send 0, #recv 0 errorslocal crypto endpt. : 76.W.E.R, remote Start crypto. : 75.X.X.X
Path mtu 1500, mtu 1500 ip, ip mtu IDB GigabitEthernet0/0
current outbound SPI: 0x5D423270 (1564619376)
PFS (Y/N): N, Diffie-Hellman group: noSAS of the esp on arrival:
SPI: 0x2A5177DD (709982173)
transform: esp-3des esp-sha-hmac.
running parameters = {Tunnel UDP-program}
Conn ID: 2115, flow_id: VPN:115 on board, sibling_flags 80000040, crypto card: SDM_CMAP_1
calendar of his: service life remaining (k/s) key: (4301748/2809)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVE (ACTIVE)the arrival ah sas:
SAS of the CFP on arrival:
outgoing esp sas:
SPI: 0x5D423270 (1564619376)
transform: esp-3des esp-sha-hmac.
running parameters = {Tunnel UDP-program}
Conn ID: 2116, flow_id: VPN:116 on board, sibling_flags 80000040, crypto card: SDM_CMAP_1
calendar of his: service life remaining (k/s) key: (4301637/2809)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVE (ACTIVE)outgoing ah sas:
outgoing CFP sas:
Routing crypto isakmp #sh its
IPv4 Crypto ISAKMP Security Association
DST CBC conn-State id
76.W.E.R 75.X.X.X QM_IDLE 1055 ACTIVEIPv6 Crypto ISAKMP Security Association
In your acl, nat, you will need to refuse your VPN traffic before you allow the subnet at all. Just put all the declarations of refusal before the declarations of licence.
Sent by Cisco Support technique iPhone App
-
Cisco Connect 'advanced settings '.
I have a Linksys E1000, firmware 2.1.02 Build 5. Everything works fine. I wish I could turn off and turn on Wi - Fi. I can't have a simple way of Cisco Connect to do. Is there a way?
Before installing Cisco Connect, I did it by browsing to 192.168.1.1, logging and the wireless tab, I chose 'Disabled' or 'Active '. Now, I think I need to go to Cisco Connect > router settings > change > advanced settings. But, he says: "... to change the advanced settings may prevent you from using Cisco Connect.
My question, if I turn off the Wi - Fi using the advanced settings of Cisco Connect, I eventually will be able to activate Wi - Fi using Cisco Connect advanced or I'd lose Cisco Connect altogether? Thank you.
Yes, it possible to disable, and then click Enable wireless by Cisco Connect. Cisco Connect will be still functional even after following the steps listed above. Later, when you want to enable wireless on your router, please ensure that you activate via Cisco connect itself.
-
OSPF between 6224 and Cisco please!
It is easily possible to Exchange routes using a 6224 for a Cisco 7204 OSPF? My cisco has always been eigrp between all other routers.
I have OSPF enabled on the cisco as follows:
router ospf 100
Log-adjacency-changes
redistribute subnets eigrp 1
network 172.0.0.0 0.0.0.0 area 1What should I exactly say the 6224 to accept the cisco roads?
I can find samples for the 6024, but not the 6224
-
Cisco ASA 5515 two asa firewall ipsec vpn tunnel is not coming
HelloW everyone.
I configured ipsec vpn tunnel between Singapore and Malaysia with asa firewall.
but the vpn does not come to the top. can someone tell me what can be the root cause?
Here is the configuration of twa asa: (I changed the ip address all the)
Singapore:
See the race
ASA 2.0000 Version 4
!
ASA5515-SSG520M hostname
activate the encrypted password of PVSASRJovmamnVkD
names of
!
interface GigabitEthernet0/0
nameif inside
security-level 100
IP 192.168.15.4 255.255.255.0
!
interface GigabitEthernet0/1
nameif DMZ
security-level 50
IP 192.168.5.3 255.255.255.0
!
interface GigabitEthernet0/2
nameif outside
security-level 0
IP 160.83.172.8 255.255.255.224
<--- more="" ---="">
!
<--- more="" ---="">
interface GigabitEthernet0/3
<--- more="" ---="">
Shutdown
<--- more="" ---="">
No nameif
<--- more="" ---="">
no level of security
<--- more="" ---="">
no ip address
!
interface GigabitEthernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/5
nameif test
security-level 100
IP 192.168.168.219 255.255.255.0
!
interface Management0/0
management only
nameif management
security-level 100
IP 192.168.1.1 255.255.255.0
!
connection of the banner ^ C please disconnect if you are unauthorized access ^ C
connection of the banner please disconnect if you are unauthorized access
boot system Disk0: / asa922-4-smp - k8.bin
passive FTP mode
network of the SG object
<--- more="" ---="">
192.168.15.0 subnet 255.255.255.0
network of the MK object
192.168.6.0 subnet 255.255.255.0
service of the TCP_5938 object
Service tcp destination eq 5938
Team Viewer description
service tcp_3306 object
Service tcp destination eq 3306
service tcp_465 object
tcp destination eq 465 service
service tcp_587 object
Service tcp destination eq 587
service tcp_995 object
tcp destination eq 995 service
service of the TCP_9000 object
tcp destination eq 9000 service
network of the Inside_host object
Home 192.168.15.202
service tcp_1111 object
Service tcp destination eq 1111
service tcp_7878 object
Service tcp destination eq 7878
service tcp_5060 object
SIP, service tcp destination eq
<--- more="" ---="">
service tcp_5080 object
Service tcp destination eq 5080
network of the NETWORK_OBJ_192.168.15.0_24 object
192.168.15.0 subnet 255.255.255.0
inside_access_in list extended access allowed object SG ip everything
OUTSIDE_IN list extended access permit tcp any newspaper EQ 9000 Inside_host object
access extensive list ip 192.168.15.0 outside_cryptomap allow 255.255.255.0 object MK
pager lines 24
Enable logging
timestamp of the record
exploitation forest-size of the buffer of 30000
debug logging in buffered memory
recording of debug trap
debugging in the history record
asdm of logging of information
host test 192.168.168.231 record
host test 192.168.168.203 record
Within 1500 MTU
MTU 1500 DMZ
Outside 1500 MTU
test MTU 1500
management of MTU 1500
no failover
<--- more="" ---="">
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 7221.bin
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
NAT (inside, outside) static source SG SG static destination MK MK non-proxy-arp-search to itinerary
!
network of the SG object
NAT dynamic interface (indoor, outdoor)
network of the Inside_host object
NAT (inside, outside) interface static 9000 9000 tcp service
inside_access_in access to the interface inside group
Access-group OUTSIDE_IN in interface outside
Route outside 0.0.0.0 0.0.0.0 160.83.172.x 1
Route inside 10.0.1.0 255.255.255.0 192.168.15.199 1
Route inside 10.0.2.0 255.255.255.0 192.168.15.199 1
Route inside 10.0.11.0 255.255.255.0 192.168.15.199 1
Route inside 10.1.0.0 255.255.0.0 192.168.15.199 1
Route inside 10.8.0.0 255.255.0.0 192.168.15.199 1
Route inside 10.104.0.0 255.255.0.0 192.168.15.199 1
Route inside 192.168.8.0 255.255.255.0 192.168.15.199 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
<--- more="" ---="">
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
the ssh LOCAL console AAA authentication
Enable http serverCommunity trap SNMP-server host test 192.168.168.231 *.
No snmp server location
No snmp Server contact
Server enable SNMP traps syslog
Crypto ipsec transform-set ikev1 VPN-TRANSFORM esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
<--- more="" ---="">
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
<--- more="" ---="">
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
Crypto ipsec pmtu aging infinite - the security association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
crypto CRYPTO - map 2 map corresponds to the address outside_cryptomap
card crypto CRYPTO-map 2 set peer 103.246.3.54
card crypto CRYPTO-map 2 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto CRYPTO-map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
CRYPTO-card interface card crypto outside
trustpool crypto ca policy
Crypto ikev1 allow outside
IKEv1 crypto policy 10
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400Console timeout 0
management of 192.168.1.2 - dhcpd address 192.168.1.254
enable dhcpd management
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
SSL encryption rc4-aes128-sha1 aes256-3des-sha1 sha1 sha1
internal GroupPolicy1 group strategy
attributes of Group Policy GroupPolicy1
Ikev1 VPN-tunnel-Protocol
username, password admin eY/fQXw7Ure8Qrz7 encrypted privilege 15
username gmsadmin password HS/VyK0jtJ/PANQT encrypted privilege 15
tunnel-group 143.216.30.7 type ipsec-l2l
tunnel-group 143.216.30.7 General-attributes
Group Policy - by default-GroupPolicy1
<--- more="" ---="">
IPSec-attributes tunnel-group 143.216.30.7
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
Overall description
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
<--- more="" ---="">
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:ccce9a600b491c8db30143590825c01d
: endMalaysia:
:
ASA 2.0000 Version 4
!
hostname ASA5515-SSG5-MK
activate the encrypted password of PVSASRJovmamnVkD
names of
!
interface GigabitEthernet0/0
nameif inside
security-level 100
IP 192.168.6.70 255.255.255.0
!
interface GigabitEthernet0/1
nameif DMZ
security-level 50
IP 192.168.12.2 255.255.255.0
!
interface GigabitEthernet0/2
nameif outside
security-level 0
IP 143.216.30.7 255.255.255.248
<--- more="" ---="">
!
interface GigabitEthernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/5
nameif test
security-level 100
IP 192.168.168.218 255.255.255.0
!
interface Management0/0
management only
nameif management
security-level 100
IP 192.168.1.1 255.255.255.0
!
<--- more="" ---="">
Interface Port - Channel 1
No nameif
no level of security
IP 1.1.1.1 255.255.255.0
!
boot system Disk0: / asa922-4-smp - k8.bin
passive FTP mode
clock timezone GMT + 8 8
network of the SG object
192.168.15.0 subnet 255.255.255.0
network of the MK object
192.168.6.0 subnet 255.255.255.0
service of the TCP_5938 object
Service tcp destination eq 5938
Team Viewer description
service tcp_3306 object
Service tcp destination eq 3306
service tcp_465 object
tcp destination eq 465 service
service tcp_587 object
Service tcp destination eq 587
service tcp_995 object
tcp destination eq 995 service
service of the TCP_9000 object
<--- more="" ---="">
tcp destination eq 9000 service
network of the Inside_host object
Home 192.168.6.23
service tcp_1111 object
Service tcp destination eq 1111
service tcp_7878 object
Service tcp destination eq 7878
service tcp_5060 object
SIP, service tcp destination eq
service tcp_5080 object
Service tcp destination eq 5080
network of the NETWORK_OBJ_192.168.2.0_24 object
192.168.6.0 subnet 255.255.255.0
inside_access_in list extended access allowed object SG ip everything
VPN-INTERESTING-TRAFFIC extended access list permit ip object MK SG
OUTSIDE_IN list extended access permit tcp any newspaper EQ 9000 Inside_host object
outside_cryptomap to access extended list ip 192.168.6.0 allow 255.255.255.0 object SG
pager lines 24
Enable logging
timestamp of the record
exploitation forest-size of the buffer of 30000
debug logging in buffered memory
recording of debug trap
asdm of logging of information
<--- more="" ---="">
host test 192.168.168.231 record
host test 192.168.168.203 record
Within 1500 MTU
MTU 1500 DMZ
Outside 1500 MTU
test MTU 1500
management of MTU 1500
reverse IP check management interface path
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 7221.bin
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
NAT (inside, outside) static source MK MK static destination SG SG route no-proxy-arp-search
NAT (inside, outside) static source NETWORK_OBJ_192.168.2.0_24 NETWORK_OBJ_192.168.2.0_24 static destination SG SG route no-proxy-arp-search
!
network of the MK object
NAT dynamic interface (indoor, outdoor)
network of the Inside_host object
NAT (inside, outside) interface static 9000 9000 tcp service
inside_access_in access to the interface inside group
Access-group OUTSIDE_IN in interface outside
Route outside 0.0.0.0 0.0.0.0 143.216.30.x 1
<--- more="" ---="">
Route inside 10.2.0.0 255.255.0.0 192.168.6.200 1
Route inside 10.6.0.0 255.255.0.0 192.168.6.200 1
Route inside 192.168.254.0 255.255.255.0 192.168.6.200 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
AAA authentication http LOCAL console
the ssh LOCAL console AAA authentication
Enable http serverNo snmp server location
No snmp Server contact
Crypto ipsec transform-set ikev1 VPN-TRANSFORM esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
<--- more="" ---="">
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
<--- more="" ---="">
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
Crypto ipsec pmtu aging infinite - the security association
crypto CRYPTO - map 2 map corresponds to the address outside_cryptomap
card crypto CRYPTO-map 2 set peer 160.83.172.8
card crypto CRYPTO-map 2 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
CRYPTO-card interface card crypto outside
trustpool crypto ca policy
Crypto ikev1 allow outside
IKEv1 crypto policy 10
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
SSH timeout 60
SSH group dh-Group1-sha1 key exchange
Console timeout 0
management of 192.168.1.2 - dhcpd address 192.168.1.254
enable dhcpd management
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
SSL encryption rc4-aes128-sha1 aes256-3des-sha1 sha1 sha1
attributes of Group Policy DfltGrpPolicy
Ikev1 VPN-tunnel-Protocol l2tp ipsec without ssl-client
internal GroupPolicy1 group strategy
attributes of Group Policy GroupPolicy1
Ikev1 VPN-tunnel-Protocol
username, password admin eY/fQXw7Ure8Qrz7 encrypted privilege 15
username gmsadmin password HS/VyK0jtJ/PANQT encrypted privilege 15
<--- more="" ---="">
tunnel-group MK SG type ipsec-l2l
IPSec-attributes tunnel-group MK-to-SG
IKEv1 pre-shared-key *.
tunnel-group 160.83.172.8 type ipsec-l2l
tunnel-group 160.83.172.8 General-attributes
Group Policy - by default-GroupPolicy1
IPSec-attributes tunnel-group 160.83.172.8
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
<--- more="" ---="">
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:d41d8cd98f00b204e9800998ecf8427e
: endGood news, that VPN has been implemented!
According to the ping problem, my suggestion is to check, if some type of firewall based on host computers on both sides block ICMP requests.
Anyway, you can still use the capture of packets on the inside of the interfaces of the two ASAs, to check if the ICMP traffic is to reach the ASA.
In addition, you can try to enable ICMP inspection:
Policy-map global_policy
class inspection_defaultinspect the icmp
inspect the icmp error
-
Recover the password enable on 506
Hello
Could someone tell me please how I could overcome the password to enable on the Cisco PIX 506
I would be really grateful to you
Best regards
JAI Prakash
HI -.
I assume you mean recovery of password for PIX, if yes then please follow the instructions in the following document:
http://www.Cisco.com/warp/public/110/34.shtml
Hope this helps,
-
Block the specific IP traffic in ASA 5505
Hi, we have an ASA 5505 in transparent mode and run a web service online. However, we notice a number of attempts to intrution from China and Korea and we need to block these IP traffic can anyone help please?
config script is
transparent firewall
hostname xxyyASA
Select msi14F/SlH4ZLjHH of encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface Ethernet0/0
Description - the Internet-
switchport access vlan 2
!
interface Ethernet0/1
Description - connected to the LAN-
!
interface Ethernet0/2
!
interface Ethernet0/3
Shutdown
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
Bridge-Group 1
security-level 100
!
interface Vlan2
nameif outside
Bridge-Group 1
security-level 0
!
interface BVI1
Description - for management only-
IP address xxx.yyy.zzz.uuu 255.255.xxx.yyy
!
passive FTP mode
network of the WWW-SERVER-OBJ object
Home xxx.yyy.zzz.jjj
Description - webserver-
WWW-SERVER-SERVICES-TCP-OBJ tcp service object-group
Description - Services published on the WEB server-
WWW-SERVER-SERVICES-UDP-OBJ udp service object-group
Description - Services published on the WEB server - UDP
Beach of port-object 221 225
1719-1740 object-port Beach
OUTSIDE-IN-ACL scope tcp access list deny any any eq 3306
OUTSIDE-IN-ACL scope tcp access list deny any any eq telnet
OUTSIDE-IN-ACL scopes allowed icmp an entire access list
OUTSIDE-IN-ACL scopes permitted tcp access list any object WWW-SERVER-OBJ object-group WWW-SERVER-SERVICES-TCP-OBJ
access list OUTSIDE-IN-ACL scopes permit tcp host xxx.yyy.zzz.uuu object WWW-SERVER-OBJ eq 3306
OUTSIDE-IN-ACL scopes permitted udp access list any object WWW-SERVER-OBJ object-group WWW-SERVER-SERVICES-UDP-OBJ
We need to block access of host say 64.15.152.208
Just need the best step to follow and block access, without affecting the service or other host
Thank you
Insert a line like:
OUTSIDE-IN-ACL scope access list deny host ip 64.15.152.208 all
in front of your 3rd line "... to enable icmp a whole."
If you have many of them, maybe do:
object-group network blacklist
host of the object-Network 64.15.152.208
network-host another.bad.ip.here object
object-network entire.dubious.subnet.here 255.255.255.0
...
OUTSIDE-IN-ACL scope object-group BLACKLIST ip deny access list all
If you want to take in scores of reputation on the outside, or the blacklist changes a lot, you might look into the Cisco ASA IPS module.
Note that fleeing bad hosts help with targeted attacks, but not with denial of service; only, he moves to point decline since the application for the firewall server, without much effect on the net on your uplink bandwidth consumption.
-Jim Leinweber, WI State Lab of hygiene
-
Problem with PIX 501-> L2L 1721 VPN
I am setting up a site to site vpn according to the http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a008051a69a.shtml.
I want to connect 192.168.105.0/24 and 192.168.106.0/24.
PIX01 is 192.168.106.1, with dynamic external IP (B.B.B.B)
RTR01 is 192.168.105.1, with dynamic external IP address (I'm just using DHCP current address of the ISP as A.A.A.A in the config of PIX01 - this is a temporary application, not critical where I can update the address if necessary)
It seems that the VPN tunnel is established but traffic does not return the router to the pix. I temporarily hosted all of the traffic on indoor/outdoor PIX interfaces (and icmp).
If I enable icmp debug I see ping requests from the client to 192.168.106.100 internal interface of the router (192.168.105.1), but no return icmp:
On PIX01:
180:-Interior ICMP echo request: 192.168.105.1 ID = 1 length = 40 seq = 298 192.168.106.100
181:-Interior ICMP echo request: 192.168.105.1 ID = 1 length = 40 seq = 299 192.168.106.100
182:-Interior ICMP echo request: 192.168.105.1 ID = 1 length = 40 seq = 300 192.168.106.100
183:-Interior ICMP echo request: 192.168.105.1 ID = 1 seq = length 301 = 40 192.168.106.100On RTR01:
* 03:40:46.885 22 dec: ICMP: echo responded, 192.168.105.1 src, dst 192.168.106.100
* 03:40:51.713 22 dec: ICMP: echo responded, 192.168.105.1 src, dst 192.168.106.100
* 03:40:56.713 22 dec: ICMP: echo responded, 192.168.105.1 src, dst 192.168.106.100
* 03:41:01.709 22 dec: ICMP: echo responded, 192.168.105.1 src, dst 192.168.106.100Output of running sh crypto isakmp his:
PIX01 (config) # sh crypto isakmp his
Total: 1
Embryonic: 0
Src DST in the meantime created State
A.A.A.A B.B.B.B 0 1 QM_IDLERTR01 #sh crypto isakmp his
status of DST CBC State conn-id slot
A.A.A.A B.B.B.B QM_IDLE 1 0 ACTIVEOut of HS crypto ipsec his:
PIX01 (config) # sh crypto ipsec his
Interface: outside
Crypto map tag: IPSEC, local addr. B.B.B.Blocal ident (addr, mask, prot, port): (192.168.106.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (192.168.105.0/255.255.255.0/0/0)
current_peer: A.A.A.A:500
LICENCE, flags is {origin_is_acl},
#pkts program: 103, #pkts encrypt: collection of #pkts 103, 103
#pkts decaps: 0, #pkts decrypt: 0, #pkts check 0
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0, #pkts decompress failed: 0
#send 12, #recv errors 0local crypto endpt. : B.B.B.B, remote Start crypto. : A.A.A.A
Path mtu 1500, overload ipsec 56, media, mtu 1500
current outbound SPI: 7cb75998SAS of the esp on arrival:
SPI: 0xb896f6c6 (3096901318)
transform: esp - esp-md5-hmac.
running parameters = {Tunnel}
slot: 0, conn id: 1, crypto card: IPSEC
calendar of his: service life remaining (k/s) key: (4608000/3151)
Size IV: 8 bytes
support for replay detection: Ythe arrival ah sas:
SAS of the CFP on arrival:
outgoing esp sas:
SPI: 0x7cb75998 (2092390808)
transform: esp - esp-md5-hmac.
running parameters = {Tunnel}
slot: 0, conn id: 2, crypto card: IPSEC
calendar of his: service life remaining (k/s) key: (4607999/3151)
Size IV: 8 bytes
support for replay detection: Youtgoing ah sas:
outgoing CFP sas:
RTR01 #sh crypto ipsec his
Interface: Vlan600
Crypto map tag: IPSEC, local addr A.A.A.Aprotégé of the vrf: (none)
local ident (addr, mask, prot, port): (192.168.105.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (192.168.106.0/255.255.255.0/0/0)
current_peer B.B.B.B port 500
LICENCE, flags is {}
program #pkts: 10, #pkts encrypt: 10, #pkts digest: 10
decaps #pkts: 10, #pkts decrypt: 10, #pkts check: 10
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
Errors #send 0, #recv 0 errorslocal crypto endpt. : A.A.A.A, remote Start crypto. : B.B.B.B
Path mtu 1500, mtu 1500 ip, ip mtu BID Vlan600
current outbound SPI: 0xB896F6C6 (3096901318)SAS of the esp on arrival:
SPI: 0x7CB75998 (2092390808)
transform: esp - esp-md5-hmac.
running parameters = {Tunnel}
Conn ID: 2002, flow_id: SW:2, crypto card: IPSEC
calendar of his: service life remaining (k/s) key: (4556997/3076)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVEthe arrival ah sas:
SAS of the CFP on arrival:
outgoing esp sas:
SPI: 0xB896F6C6 (3096901318)
transform: esp - esp-md5-hmac.
running parameters = {Tunnel}
Conn ID: 2001, flow_id: SW:1, crypto card: IPSEC
calendar of his: service life remaining (k/s) key: (4556997/3076)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVEoutgoing ah sas:
outgoing CFP sas:
I can provide more information if necessary.
Thanks in advance for any help,
CJ
ISAKMP uses UDP/500 and it is true he helped through phase 1 being upwards (QM_IDLE).
IPSec uses ESP or UDP/4500, and this is what must be authorized by the FW.
-
I have two problems with IPSEC VPN, using the cisco client, and a third, which I think could answer here if this isn't strictly associated with VPN.
1. cannot access the internet, while VPN is in place. This can be a problem of client as I * think * I've split tunneling to install correctly.
2. cannot access other networks except the network associated with the inside interface natively.
3. I can not ping to the internet from inside, be it on the VPN or not.
I tend to use the SMDA; Please, if possible, keep the answer to this kindof of entry.
Here is the config:
Output of the command: "sh run".
: Saved
:
ASA Version 8.4 (1)
!
hostname BVGW
domain blueVector.com
activate qWxO.XjLGf3hYkQ1 encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface Ethernet0/0
nameif outside
security-level 10
IP 5.29.79.10 255.255.255.248
!
interface Ethernet0/1
nameif inside
security-level 100
IP 172.17.1.2 255.255.255.0
!
interface Ethernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
nameif management
security-level 100
IP 172.19.1.1 255.255.255.0
management only
!
passive FTP mode
DNS server-group DefaultDNS
domain blueVector.com
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
the subject of WiFi network
172.17.100.0 subnet 255.255.255.0
WiFi description
the object to the Interior-net network
172.17.1.0 subnet 255.255.255.0
network of the NOSPAM object
Home 172.17.1.60
network of the BH2 object
Home 172.17.1.60
the EX2 object network
Home 172.17.1.61
Description internal Exchange / SMTP outgoing
the Mail2 object network
Home 5.29.79.11
Description Ext EX2
network of the NETWORK_OBJ_172.17.1.240_28 object
subnet 172.17.1.240 255.255.255.240
network of the NETWORK_OBJ_172.17.200.0_24 object
172.17.200.0 subnet 255.255.255.0
DM_INLINE_TCP_1 tcp service object-group
port-object eq www
EQ object of the https port
the DM_INLINE_NETWORK_1 object-group network
network-object BH2
network-object NOSPAM
Outside_access_in list extended access permit tcp any eq smtp DM_INLINE_NETWORK_1 object-group
Outside_access_in list extended access permit tcp any object object-group DM_INLINE_TCP_1 BH2
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
management of MTU 1500
mask pool local 172.17.1.240 - 172.17.1.250 VPN IP 255.255.255.0
mask pool local 172.17.200.100 - 172.17.200.200 VPN2 IP 255.255.255.0
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
NAT (inside, outside) static source EX2 Mail2
NAT (inside, outside) static source all all NETWORK_OBJ_172.17.1.240_28 of NETWORK_OBJ_172.17.1.240_28 static destination
NAT (inside, outside) static source all all NETWORK_OBJ_172.17.200.0_24 of NETWORK_OBJ_172.17.200.0_24 static destination
NAT (inside, outside) static source to the Interior-NET Interior-net destination static NETWORK_OBJ_172.17.1.240_28 NETWORK_OBJ_172.17.1.240_28
!
the object to the Interior-net network
NAT (inside, outside) dynamic interface
network of the NOSPAM object
NAT (inside, outside) static 5.29.79.12
Access-group Outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 5.29.79.9 1
Route inside 10.2.0.0 255.255.255.0 172.17.1.1 1
Route inside 10.3.0.0 255.255.255.128 172.17.1.1 1
Route inside 10.10.10.0 255.255.255.0 172.17.1.1 1
Route inside 172.17.100.0 255.255.255.0 172.17.1.3 1
Route inside 172.18.1.0 255.255.255.0 172.17.1.1 1
Route inside 192.168.1.0 255.255.255.0 172.17.1.1 1
Route inside 192.168.11.0 255.255.255.0 172.17.1.1 1
Route inside 192.168.30.0 255.255.255.0 172.17.1.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
AAA-server blueVec protocol ldap
blueVec AAA-server (inside) host 172.17.1.41
LDAP-base-dn DC = adrs1, DC = net
LDAP-group-base-dn DC = EIM, DC = net
LDAP-scope subtree
LDAP-naming-attribute sAMAccountName
LDAP-login-password *.
LDAP-connection-dn CN = Hanna\, Roger, OU = human, or = WPLAdministrator, DC = adrs1, DC = net
microsoft server type
Enable http server
http 192.168.1.0 255.255.255.0 management
http 172.17.1.0 255.255.255.0 inside
http 24.32.208.223 255.255.255.255 outside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto Outside_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
Outside_map interface card crypto outside
Crypto ikev1 allow outside
IKEv1 crypto policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
authentication crack
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 172.17.1.0 255.255.255.0 inside
SSH timeout 5
Console timeout 0
dhcpd address 172.17.1.100 - 172.17.1.200 inside
dhcpd 4.2.2.2 dns 8.8.8.8 interface inside
dhcpd lease interface 100000 inside
dhcpd adrs1.net area inside interface
!
a basic threat threat detection
threat detection statistics
a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
WebVPN
internal blueV group policy
attributes of the strategy of group blueV
value of server WINS 172.17.1.41
value of 172.17.1.41 DNS server 172.17.1.42
Ikev1 VPN-tunnel-Protocol
value by default-field ADRS1.NET
internal blueV_1 group policy
attributes of the strategy of group blueV_1
value of server WINS 172.17.1.41
value of 172.17.1.41 DNS server 172.17.1.42
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
adrs1.NET value by default-field
username gwhitten encrypted password privilege 0 8fLfC1TTV35zytjA
username gwhitten attributes
VPN-group-policy blueV
rparker encrypted FnbvAdOZxk4r40E5 privilege 15 password username
attributes of username rparker
VPN-group-policy blueV
username mhale encrypted password privilege 0 2reWKpsLC5em3o1P
username mhale attributes
VPN-group-policy blueV
VpnUser2 SlHbkDWqPQLgylxJ encrypted privilege 0 username password
username VpnUser2 attributes
VPN-group-policy blueV
Vpnuser3 R6zHxBM9chjqBPHl encrypted privilege 0 username password
username Vpnuser3 attributes
VPN-group-policy blueV
username VpnUser1 encrypted password privilege 0 mLHXwxsjJEIziFgb
username VpnUser1 attributes
VPN-group-policy blueV
username dcoletto encrypted password privilege 0 g53yRiEqpcYkSyYS
username dcoletto attributes
VPN-group-policy blueV
username, password jmcleod aSV6RHsq7Wn/YJ7X encrypted privilege 0
username jmcleod attributes
VPN-group-policy blueV
rhanna encrypted Pd3E3vqnGmV84Ds2 privilege 15 password username
rhanna attributes username
VPN-group-policy blueV
username rheimann encrypted password privilege 0 tHH5ZYDXJ0qKyxnk
username rheimann attributes
VPN-group-policy blueV
username jwoosley encrypted password privilege 0 yBOc8ubzzbeBXmuo
username jwoosley attributes
VPN-group-policy blueV
2DBQVSUbfTBuxC8u encrypted password privilege 0 kdavis username
kdavis username attributes
VPN-group-policy blueV
username mbell encrypted password privilege 0 adskOOsnVPnw6eJD
username mbell attributes
VPN-group-policy blueV
bmiller dpqK9cKk50J7TuPN encrypted password privilege 0 username
bmiller username attributes
VPN-group-policy blueV
type tunnel-group blueV remote access
tunnel-group blueV General-attributes
address VPN2 pool
authentication-server-group blueVec
Group Policy - by default-blueV_1
blueV group of tunnel ipsec-attributes
IKEv1 pre-shablue-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
HPM topN enable
Cryptochecksum:2491a825fb8a81439a6c80288f33818e
: end
Any help is appreciated!
-Roger
Hey,.
Unfortunately, I do not use ASDM myself but will always mention things that could be done.
You do not split tunneling. All traffic either tunnel to the ASA, while VPN is active
You have the following line under the "group policy"
Split-tunnel-policy tunnelspecified
You will also need this line
Split-tunnel-network-list value
Defines the destination for the VPN Client networks. If you go in on the side of the ASDM group policy settings, you should see that no ACL is selected. You don't really seem to have an ACL in the configuration above, for the split tunneling?
To activate access Internet via the VPN Client now in the current configuration, I would say the following configuration of NAT
VPN-CLIENT-PAT-SOURCE network object-group
object-network 172.17.200.0 255.255.255.0
NAT (outside, outdoor) automatic interface after dynamic source VPN-CLIENT-PAT-SOURCE
In regards to the traffic does not for other networks, I'm not really sure. I guess they aren't hitting the rule NAT that are configured. I think they should, but I guess they aren't because its does not work
I could myself try the following configuration of NAT
object-group, network LAN-NETWORKS
object-network 10.2.0.0 255.255.255.0
object-network 10.3.0.0 255.255.255.128
object-network 10.10.10.0 255.255.255.0
object-network 172.17.100.0 255.255.255.0
object-network 172.18.1.0 255.255.255.0
object-network 192.168.1.0 255.255.255.0
object-network 192.168.11.0 255.255.255.0
object-network 192.168.30.0 255.255.255.0
object-group, network VPN-POOL
object-network 172.17.200.0 255.255.255.0
NAT (inside, outside) static static source of destination LAN-LAN-NETWORK VPN-VPN-POOL
Add ICMP ICMP Inspection
Policy-map global_policy
class inspection_default
inspect the icmp
or alternatively
fixup protocol icmp
This will allow automatically response to ICMP echo messages pass through the firewall. I assume that they are is blocked by the firewall now since you did not previously enable ICMP Inspection.
-Jouni
-
AnyConnect VPN connected but not in LAN access
Hello
I just connfigured an ASA to remote VPN. I think everything works but I do not have access
for customers in the Local LAN behind the ASA.
PC <==internet==>outside of the SAA inside<=LAN=> PC
After AnyConnect has established the connection I can ping inside the Interface of the ASA
but I can't Ping the PC behind the inside Interface.
Here is the config of the ASA5505:
: Saved
:
ASA Version 8.2 (1)
!
asa5505 hostname
activate 8Ry2YjIyt7RRXU24 encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP 192.168.178.254 255.255.255.0
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
Shutdown
!
interface Ethernet0/3
Shutdown
!
interface Ethernet0/4
Shutdown
!
interface Ethernet0/5
Shutdown
!
interface Ethernet0/6
Shutdown
!
interface Ethernet0/7
Shutdown
!
passive FTP mode
Inside_ICMP list extended access permit icmp any any echo response
Inside_ICMP list extended access permit icmp any any source-quench
Inside_ICMP list extended access allow all unreachable icmp
Inside_ICMP list extended access permit icmp any one time exceed
access-list outside_cryptomap_2 note ACL traffic von ASA5505 zur ASA5510
outside_cryptomap_2 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.10.0 255.255.255.0
no_NAT to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.10.0 255.255.255.0
no_NAT to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.178.0 255.255.255.0
tunnel of splitting allowed access list standard 192.168.1.0 255.255.255.0
pager lines 24
Within 1500 MTU
Outside 1500 MTU
mask 192.168.1.10 - 192.168.1.15 255.255.255.0 IP local pool SSLClientPool
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access no_NAT
NAT (inside) 1 192.168.1.0 255.255.255.0
Access-group Inside_ICMP in interface outside
Route outside 0.0.0.0 0.0.0.0 192.168.178.1 1
Route outside 192.168.10.0 255.255.255.0 192.168.178.230 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
AAA authentication http LOCAL console
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set-3DESSHA FRA esp-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
card crypto outside_map 2 match address outside_cryptomap_2
peer set card crypto outside_map 2 192.168.178.230
card crypto outside_map 2 game of transformation-FRA-3DESSHA
outside_map interface card crypto outside
Crypto ca trustpoint localtrust
registration auto
domain name full cisco - asa5505.fritz.box
name of the object CN = cisco - asa5505.fritz.box
sslvpnkeypair key pair
Configure CRL
Crypto ca certificate chain localtrust
certificate fa647850
3082020b a0030201 30820174 020204fa 0d06092a 64785030 864886f7 0d 010104
0500304 06035504 03131763 6973636f 617361 35353035 2e667269 2d 3120301e a
747a2e62 6f783126 30240609 2a 864886 f70d0109 02161763 6973636f 2d 617361
2e667269 35353035 747a2e62 6f78301e 170d 3132 31303132 31383434 31305a 17
323231 30313031 38343431 06035504 03131763 6973636f 3120301e 305a304a 0d
617361 35353035 2e667269 747a2e62 6f783126 2a 864886 30240609 f70d0109 2D
6973636f 02161763 2d 617361 35353035 2e667269 747a2e62 6f783081 9f300d06
d6279e1c 8181009f 092a 8648 86f70d01 01010500 03818d 30818902 00 38454fc 9
705e1e58 762edc35 e64262fb ee55f47b 8d62dda2 102c8a22 c97e395f 2a9c0ebb
f2881528 beb6e9c3 89d91dda f7fe77a4 2a1fda55 f8d930b8 3310a05f 622dfc8f
d48ea749 7bbc4520 68 has 06392 d65d3b87 0270e41b 512a4e89 94e60167 e2fa854a
87ec04fa e95df04f 3ff3336e c7437e30 ffbd90b5 47308502 03010001 300 d 0609
2a 864886 04050003 81810065 cc9e6414 3c322d1d b191983c 97b474a8 f70d0101
2e5c7774 9d54d3ec fc4ee92d c72eef27 a79ce95a da83424f b05721c0 9119e7ea
c5431998 e6cd8272 de17b5ff 5b1839b5 795fb2a0 2d10b479 056478fa 041555dd
bfe3960a 4fe596ec de54d58b a5fa187e 5967789a a26872ef a33b73ec 7d7673b9
c8af6eb0 46425cd 2 765f667d 4022c 6
quit smoking
crypto ISAKMP allow outside
crypto ISAKMP policy 1
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
management-access inside
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
localtrust point of trust SSL outdoors
WebVPN
allow outside
SVC disk0:/anyconnect-win-2.3.0254-k9.pkg 1 image
SVC disk0:/anyconnect-wince-ARMv4I-2.3.0254-k9.pkg 2 image
enable SVC
tunnel-group-list activate
internal SSLClientPolicy group strategy
attributes of Group Policy SSLClientPolicy
VPN-tunnel-Protocol svc
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value split tunnel
the address value SSLClientPool pools
WebVPN
SVC Dungeon-Installer installed
time to generate a new key of SVC 30
SVC generate a new method ssl key
SVC request no svc default
username password asdm privilege Yvx83jxa2WCRAZ/m number 15
hajo 2w8CnP1hHKVozsC1 encrypted password username
hajo attributes username
type of remote access service
tunnel-group 192.168.178.230 type ipsec-l2l
IPSec-attributes tunnel-group 192.168.178.230
pre-shared-key *.
type tunnel-group SSLClientProfile remote access
attributes global-tunnel-group SSLClientProfile
Group Policy - by default-SSLClientPolicy
tunnel-group SSLClientProfile webvpn-attributes
enable SSLVPNClient group-alias
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:0008564b545500650840cf27eb06b957
: end
What wrong with my setup.
Concerning
Hans-Jürgen Guenter
Hello Hans,.
You should change your VPN pool to be a different subnet within the network, for example: 192.168.5.0/24
Then configure NAT exemption for traffic between the Interior and the pool of vpn.
Based on your current configuration, the following changes:
mask 192.168.5.10 - 192.168.5.15 255.255.255.0 IP local pool SSLClientPool
no_NAT to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.5.0 255.255.255.0
And then also to enable icmp inspection:
Policy-map global_policy
class inspection_default
inspect the icmp
Maybe you are looking for
-
The key traits appear as different characters in FireFox.
Before a letter, the number or letter shows a different symbol in Firefox in the address field or field of research. I DataMask by AOL which shows the different characters in his field, but the correct information seems to display in Internet Explore
-
It is DEME past in FireFox, the 'L' key is like a 't' and the key encoding ';' is coding as an "f". At first, I thought that my keyboard came out, but Firefox is the only program that does this. All other keys seem to work correctly. This question re
-
Reprint of the old questions about daily management print app
Can I reprint already old issues of the daily managers print app? How to do this? I agree with managers Daily app impression, then she left issue 510. I want to get them all since the first issue until the current issue.
-
Why my wireless adapter has stop working on my brand new hp pavilion g7-1338dx.
I ran the wizard network without success and reset my router several times. When I get it to connect, it will stay connected until I stopped. Then when I turn on the computer the next time it doesn, t want yo connect. It, s a new brand Paviloion HP g
-
I need to send a library template. How can I define roles (Particpiant1, Participant2... etc) of the signatory. I try something whats below but I get error of invalid role:{'documentCreationInfo': {}'name': "MyTest""signatureType": "ESIGN""beneficiar