Similar Questions

• Smart camera - choice of a profile

  Can someone tell me if it is possible to use the IO pins smart cameras 17XX NOR for the "Product Selection" or "profile"? If so, which of these pins can be used and how?

  For example, if there are 2 pins, this means that I can store 4 different inspections on the smart camera. Based on the input bits, the number of specific Inspection will be launched during the restart of the smart camera.

  As the IO smart camera returns Boolean values and State of product selection requires a number or a string to choose which product to choose, you might use a Global Variable at the end of each of your inspections and system date with the State of the input on the smart camera lines. Then, in the State of product selection, you can read the value of these two Globals system during the stage of LabVIEW to run home (which has already been compiled for the smart camera). This VI converts two Boolean values into a number (from 0 to 3) which can be used to select products.

  Hope this helps,

  Brad

• change the variables in a smart camera by a remote computer

  Hello

  I have a smart camera NI1722 and I want to change some variables inside the camera by a computer which is connected to the camera.

  Is it possible to change the variables inside the camera from a computer outside? On the computer we program with CVI. We have a RS232 and TCP/IP connection.

  Anybody can help us?

  Thank you

  Oliver

  Hi Oliver,.

  You use a LabVIEW or Vision Builder AI program the smart camera?

  There are several ways to Exchange data between a smart camera and CVI on the host computer.

  The easiest way is probably to use shared variables.

  If you use LabVIEW to program the smart camera, the following article explains how to create and deploy shared on the target variables.

  http://zone.NI.com/DevZone/CDA/tut/p/ID/4679

  If you use Vision Builder AI, first connect to the smart camera, then select Tools > Variable Manager...

  Select the tag System Variables, and then click Add to create the variable for the data you want to share. Be sure to select publish it on the network box.

  You can set the value of these variables in Vision Builder, using the step set the Variable, located in the tools palette.

  And a lot of steps allow for use directly in their configuration page, clicking the arrow to the bottom of some digital controls.

  Now, on the side of the CVI, this example shows how to connect, read and write variables that you created on the smart camera.

  https://decibel.NI.com/content/docs/doc-3806

  I hope this helps.

  Best regards

  -Christophe

• The smart camera target

  Hello!

  I've tried to sort, the abundance of information, it is possible to install the necessary software (CVI RT DURATION, etc.) for cameras 17xx OR program then with CVI?

  Currently, I only installed the software recommended to the target and don't see the CVI runtimes in the installation wizard. The CVI environment reports that I have the correct version of Labwindows CVI Run-Time Engine for installed RT.

  Thank you!

  You can not install a RTE of LabWindows/CVI on a smart or 17xx camera.  If you read the user manual, you can install the software below to target the smart camera.

  Manual smart camera NOR 17xx

  

  If you want to develop in LabWindows/CVI, you will first need to make a script VBAI to deploy it to the target.  Then, you can call the smart camera using the API C VBAI.

• communication problem with smart cameras

  Hello
  I am currently using VBAI 2010 with my smart camera and for the exchange of variables I use the function CNVCreateWriter to contact CVI 2010. It works fine when I'm in the configuration interface. I can use and modify all the variables with no problems.

  But when I switch to the control interface I can't modify variables more. By using the CNVCreateWriter function, I get the error message: RUN-TIME ERROR NO FATALE: "Camera_Api.c", line 130, col 14, 0x0000107C thread id: CNVCreateWriter function: (is-6345 return value [0xffffe737]). Cannot complete the operation within the specified time

  Someone know why it works in the configuration interface, but not in control in the real world interface?

  by the way: I can't use VBAI 2011 right now because we do not yet have a license for it

  Thanks in advance
  Oliver

  In configuration mode, things run slower on the smart camera because synchronize us execution with the update of Windows information on execution of State step, etc. When you run in inspection mode, it runs as fast as possible, so it may not be as many processor available time to process access requests to your application of C variables. Is the acquisition of your inspection triggered images or go faster the smart camera can possibly go (i.e. not triggered immediate mode)? If you're in free run mode, what happens if you change to wait next... This can give the processor a little more time to update the variables requests while he's waiting for the image to be acquired. Another way to test this theory would be to put one step behind in your inspection and see if it works (starting with 100ms and if it works, check out how small you can do).

  Something that could also help is to define the variables on your host machine and in VBAI a variable of network that binds to the variables defined on your PC. In this way, the variable engine shared on RT doesn't have to manage the updates from your PC, as well as updates of VBAI, as well as the execution of the inspection as soon as possible, and your C application should not have problems to access the variables on the same machine. This means that your PC needs to be up and running when your control is running on the smart camera or there is time-out errors to access variables... but this may be good for your application. Here is a nice document that speaks in depth of shared variables.

  http://zone.NI.com/DevZone/CDA/tut/p/ID/4679

  Another option could be to use TCP, series, Ethernet/IP, or some other variable VBAI read/write Protocol.

  Hope this helps,

  Brad

• Want to 700-021eo. : 15-one smart card reader will not work or show after upgrade to Win10

  15-one smart card reader worked fine under WIN 8.1 but after that upgrade to Win10 it does not appear in the list of devices. I have tried to find drivers but don't know if it's a unit of HP or Realtek or whatever. Any suggestions?

  Kind regards

  Eyvind

  Hello @Eyka,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you have a problem with the smart card reader and wanted to help you!  I see that this problem started after the upgrade of OS Windows 10.

  It seems that there are no Windows 10 drivers available for your product on the HP site.  It seems that Windows 10 drivers can be pushed through Windows Update.  Alternatively, you can try to check this site as well:

  HP products - where to find Windows 10 drivers and software for my model?

  If you have problems to install the drivers, you can use the tool on the following site:

  Open the Windows Update troubleshooting tool

  It is possible that the drivers are not available for your product.  If this is the case, or the drivers you found do not work, try to use the solutions on this site to work around the problem and let me know how it goes: how: install and update drivers in Windows 10

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great weekend!

• 1774 C Smart Camera Zoom?

  Hello - I have a 1774C smart camera and I wonder if he has a zoom/depth of field control of the MAX software or if there is only a manual control.

  Thank you
  Olivia

  I check the manual
  There isn't any point of the ability to lend this optical zoom
  your answer is negative

  This camera use C-frame series without automatic optical zoom

• User interface of smart camera on VGA monitor?

  For smart cameras that have a VGA output (NI 177 x), is it possible to get the UI custom embedded in the Vision allows AI 2011, to display on the monitor (VGA) output?

  Or are you limited by being only able to display the inspection on the VGA monitor image screen?

  Unfortunately, this is not possible. Technical, for those interested, it is because that the public Service. Get the Image method only is not supported on RT.

  The custom user Interface is designed to interact with Vision Builder running on the target. It will appear in the mode of inspection on the Vision Builder running on the host machine or on a web browser if you enable the web server on the target and connect from a web browser from another machine.

  This application note gives more details: http://zone.ni.com/devzone/cda/tut/p/id/6714

  There is a way to achieve a similar result, that is to draw overlays in the image using the Custom Overlay stage located in the palette to use additional tools.

  Christophe

• cRIO and smart camera working simultaneously

  How can I get my smart camera to operate their screws simultaneously on the same ethernet with a hub port? It gives me an error if I run the smart cameras and Crio VI.

  double post, already answered here

• Acquisition & savings with smart camera

  I couldn't find an example on the recording of the images of the sequence to hard drive with Ximea smart cameras.

  I have a RL50C smart camera. I want to acquire and store images on the hard drive. Because I don't have a LabVIEW installed in this unit, I need to program it in a development computer and then build aplications for DURATION. I created a VI with the webcam on my laptop.

  I wonder how can I modify this to work with my smart camera VI.

  Alejandro,

  Thanks for your help.

  I build my application with the manufacturer libraries. And I learned that this smart camera has no support of IMAQdx functions.

• smart camera of the trigger of the time-out value of the error - VBAI 3.6

  Hello that tal?, el tema are that I have a problem with the Smart camera're tengo una fotocelula conectada has the patilla of trigger and (2), el u Trigger-(12) masa in las patillas del conector DB15 of the smart camera para as cuando PASE una pieza realice the fotografia. The cuestion are el solo time-out error me already poner 60000 ms, y for example, so una pieza soon en pasar 60000 ms en el paso of the closing of imagen mas me pone time-out error, y sigue por el diagrama of blocking como if would Fall the imagen. In principio imported me that salga el time-out error, pero me gustaria that esperase has the following pieza sin avanzar por el diagrama of blocking, not so to me explico very well.

  If alguien tiene alguna idea como el problama delivery could be lo agradeceria mucho.

  Cordially, is muchas gracias of photos. David.

  Hey David,

  entonces Perfecto. If the respond you vale marcala como tal in el foro o con UN kudo en knew defecto para as other users themselves can the answer is beneficiar.

  Duro con ello!

  Jesus.

• Link crio smart camera

  Hello

  I want to use my smart camera 1744 just to manage the acquisition and the Crio-9023 to manage the entire treatment. Problem is that I have 1 ethernet port on my PC. I used a hub to connect both Crio and smart cam, but I can't connect and run these two VI with my ethernet hub simulatous.

  • Is there another way to connect them, as to connect the smart camera for the crio instead of the hub? If Yes, what is the procedure step by step?
  • Or how I can acquire images of the smart camera as if it were just a regular ip camera?

  Thankz in advance?

  OK thanks I found the problem - the ethernet hub that I used was old and may only support 10 MB/s instead of 10/100. So that's why I was getting crashes and why I wasn't able to connect to these two devices simulateously.

  Thanks for your help

  Kind regards

  Ritesh

• Run a smart camera without computer

  What is the procedure to run a smart camera without a PC?  I would like to turn it on and it runs automatically.  The software was developed on the device itself, and it emits signals of success/failure in a continuous loop.  But if I do not have the program grew up on the host PC, or if the ethernet cable is disconnected, it does not work - even if the ACQ IMG light flashes as if it is running a program.

  I have a 1722 smart camera.

  Hi jblc,

  Assuming that you have developed your inspection in VBAI, the following KB should describe how to get it to run automatically at startup.

  How can I configure my Inspection VBAI to run at startup on my CV, EVS or smart camera?
  http://digital.NI.com/public.nsf/allkb/F79D691691FE564A86257141007A1B93?OpenDocument

• selection by tcp/ip and labview 1742 smart camera inspection

  Hello everyone!

  I m working with two smart cameras NI1742 where I have an inspection for various products, I m try via tcp/ip and view lab 2010 select inspection for each product. I configured the tcp/ip connection and test it with the vision builder ethernet Terminal, this part works fine, but I can´t do this with Labview where I show images of smart cameras via shared variables.

  If anyone knows how I can do? Please, I will be grateful.

  It's my code, but there is something that's not going to.

  Thanks and greetings

  Hello! Brad

  Thank you, you have all the reason, I ve tested and works but also I need to send a command to run the selected control, isn´t it?

  Yes, you´re great Brad, now I have to just organize all my code, thank you very much.

  Greetings from the Mexico

• ftp smart camera settings

  How can I configure camera smart (1742) users and passwords ftp server?

  Hi TiKo,

  How you get a protection password for FTP for all of our time real targets is to lock the controller configuration and the configuration of the assign a password. This is done by right-clicking on the smart camera to the MAX on remote systems and selecting "Lock". Once the RT controller has a password will not allow you to FTP it unless the password is entered correctly. See also the following Developer area document that describes how to enter the user name and password for the different ways to use the FTP:

  Options of FTP with LabVIEW Real-time

  http://zone.NI.com/DevZone/CDA/tut/p/ID/3365

  I hope this information is useful for you.

  Veikko