Entrypoint error KsFilterFactoryUpdateCacheData

Similar Questions

• I have a wireless HP printer which I can not complete the installation because I get an error message ' USB 2. OWLAN Code 28 driver for this device is not installed

  I uninstalled and reinstalled the CD for installation on a HPJ610 wireless printer.  I still can't print.  All I get is the error message above? Then I try to find it and it tells me that it is not installed?  What should I do now?  Does anyone know.

  I suggest you to uninstall and reinstall the latest compatible drivers for Windows 7.

  You can also run the troubleshooting of the printer.

  Open the printer Troubleshooter

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems: http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx
   
  Run the printer problems to: http://support.microsoft.com/gp/printing_problems?entrypoint=WHHT

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

• How can I fix C00D199F error code when trying to burn a CD with Windows Media player.

  Original title: How can I fix C00D199F error code

  Error message when trying to burn a cd with Windows Media Player

  Hello

  1. what version of Windows Media Player do you use?

  2. the specific issue of burning CD using WMP?

  3. What is the exact full error message?

  4. what you are trying to burn?

  5. is the specific question on the disk?

  Method 1: You can run the fixit available in the link below and

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/GP/cd_dvd_drive_problems/en-us?EntryPoint=lightbox

  Method 2: Clean the disc

  Clean the CD or the DVD. To do this, use a disc cleaning kit. Or gently wipe the silver side of the disc with a soft and Lint cotton cloth. Do not use cloth of paper which can scratch the plastic and leave streaks. When you clean the disc, wipe from the center of the disc outward. Do not use a circular motion. If the problem persists, clean the disc with a damp cloth or a commercial CD or DVD cleaning solution. Dry the disc thoroughly until you insert the disc in the drive.

  Select a slower recording speed and check if that helps.

  1. in the Tools menu, click Options, and then click the devices tab.
  2. in devices, double-click the CD burner, and then click the recording tab.
  3. in the write speed list, select a slower speed.

  Method 3:

  Perform the clean boot and check:

   

  http://support.Microsoft.com/kb/310353

  Follow the above article.

  
  If you have any third party installed a CD/DVD burning software, uninstall them temporarily for Add / Remove Programs. Subsequently, check if you are able to burn CDs in Windows Media Player.

  Reference: Burn your own custom CDs

  Hope the above information is helpful.

• Wil Error 80070020 # not update

  On the last windows update I get this error and it will not update.  I tried to do the method to fix and be able to install without success.  Someone at - it the same problem?

  Death

  I'm sorry that you are having this problem of death.

  Try to use this Microsoft fix it Solution:
  http://support.Microsoft.com/mats/windows_update/en-us?EntryPoint=lightbox

  AND/OR

  Try to use the Microsoft support article:http://support.microsoft.com/kb/883825?wa=wsignin1.0

• Try to add a printer, get the 0x000003e7 error code, event log indicates block defective hard disk.

  Original title: try to add a printer, get error code OxOOOOO3e7, event log indicates block defective hard disk.

  I have tried disk cleaner, no help

  Hi 2012mike,

  (1) what is the number of brand and model of your printer?

  (2) what has been the result of chkdsk?

  It is sufficient to indicate the complete error message you receive.

  Please provide the details of the event logs.

  Method 1: Run the fixit available in ink below

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/en-us?EntryPoint=lightbox

  Method 2: Clean boot the computer and then try to install the printer

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows host process (Rundll32) has stopped working and the Manager device raises the error code 43

  Original title: Installation files

  I need to know how to reinstall a corrupted file. It's only an individual file which gives me the problem. I don't want to reinstall the entire windows file just to retrieve a single file. The file is the file that controls the video card (rundll32.exe).

  Hi Richstan06,

  Step 1: Run the fixit available in the link below and check if that makes a difference

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/GP/hardware_device_problems/en-us?EntryPoint=lightbox

  Step 2: The computer in the boot and a test

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  If the problem persists, you can consult the documentation of the material for more information on diagnosing the problem.

  See the article below, which deals with a similar question

  Error message when you try to configure an audio playback device disabled in Windows Vista: "Windows host process (Rundll32) has stopped working.

  http://support.Microsoft.com/kb/953916

  Thank you, and in what concerns:
  Ajay K
  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• GlobalEventListener: to distinguish between system module and gui entrypoint

  Hey. I have an application with a system module that should always run and a gui with a EULA entry point. Once accepted the EULA, I want the gui to close application and the module of the system to begin running. (It works on battery pull, but the goal is to avoid asking the user to do).

  eventOccurred in GlobalEventListener fires twice, I guess once for the module of the system and once for the GUI. Two apparently weird things happen. First of all, when I use a global boolean to make a distinction between the sysmod and GUI, GUI screen is stuck and the sysmod seems to be exited. (Or I tried passing the processid of the sysmod and just exit with a different id - the GUI.) Same effect).

  Then when I remove the and check only for the guid of the global event, the eula, the sysmod screen farm stop logging but an icon of the application with the generic blue icon are still there in the app selector (hold the menu button).

  All I want to do is start the system module and close the EULA gui, so that the user need not cold start. Thanks for your time... code below. J.

  class MDB extends UiApplication implements GlobalEventListener 
  
    boolean thisIsSystemModule;
  
      // In main(  )
  
          if (arg0.equals("gui")) {
  
              globalMDB = new MDB();
              globalMDB.SetSystemModuleFlag(false);
              globalMDB.addThatGlobal();
      }
          else if (arg0.equals("activatesysmodandexitgui")) {
  
              MySystemListener msl = new MySystemListener();
              globalMDB = new MDB();
              globalMDB.SetSystemModuleFlag(true);
              globalMDB.addSystemListener(msl);
  
              globalMDB.ScheduleNextBackgroundChange();   
  
                  String logMessage = "MDB has both setup and scheduled a bg change.";
                  EventLogger.logEvent(0x4c9d3452d87922f8L, logMessage.getBytes(), EventLogger.ALWAYS_LOG);
                      System.out.println("\n\n>>" + logMessage);
  
              // post global event for eula to listen to and close
              globalMDB.addThatGlobal(); 
  
          //// Event ID comes from MDB.Start.System.Module.And.Close.EULA.GUI  0x5395aca2ff6df828L
              ApplicationDescriptor appDescriptor = ApplicationDescriptor.currentApplicationDescriptor();
              int smprocessid = ApplicationManager.getApplicationManager().getProcessId(appDescriptor);
  
           ApplicationManager.getApplicationManager().postGlobalEvent(0x5395aca2ff6df828L, smprocessid, 0);
  
              globalMDB.enterEventDispatcher();
      }
      else {
          // code for battery pull
      }
  
      private void SetSystemModuleFlag(boolean flag) {
  
          thisIsSystemModule = flag;
  
      }
  
      private void addThatGlobal() {
  
          addGlobalEventListener(this);   
  
      }
  
      ////  Called when user accepts the eula. EULA is gui entrypoint. I want the gui app to exit and leave just the system module
  
      private static void StartSystemModule() {
  
              int modHandle = CodeModuleManager.getModuleHandle("MDB");
              ApplicationDescriptor[] apDes = CodeModuleManager.getApplicationDescriptors(modHandle);
              ApplicationDescriptor appDescriptor = new ApplicationDescriptor(apDes[1], new String[] {"activatesysmodandexitgui"});  // we want the system module
  
              try
              {
                  ApplicationManager.getApplicationManager().runApplication(appDescriptor);
              }
              catch (Exception e)
              {
                      System.out.println("\n>> Problem starting system mmodule\n");
              }
  
      }
  
  public void eventOccurred( long guid, int data0, int data1, Object object0, Object object1) {
  
          //Is this the GlobalEvent we are waiting for?
          //Long = com.samples.globalEventFiring.GlobalEventFiring
          ApplicationDescriptor appDescriptor = ApplicationDescriptor.currentApplicationDescriptor();
          int thisprocessid = ApplicationManager.getApplicationManager().getProcessId(appDescriptor);
  
          if (guid == 0x5395aca2ff6df828L)  //  !thisIsSystemModule &&         data0 != thisprocessid &&
          {
                  System.out.println("\nEvent received, eula exiting now.");
                  System.exit(1);
          }
  }
  

  Hello. The whole situation turns that arose because despite searching, I was not in the current Modules of the system to start when the application is installed (or opening). I knew only that they were running at startup, then in the absence of a way to start them from code, I asked users to cold start their phones!

  Although I do not understand what caused this error, it might have something to do with the planning of a timer job or adding a listener to an instance of the application system, and then exit the application before the timer is due to run it. Could someone with more understanding fill in us, on what it would do, but unless there is another way, I wouldn't do it.

  The solution was to do nothing. Delete all of the code to start the module of the system. And the other thing of smaller was to detect whether the instance is the module of the system or the gui entry point, Yes, you can use a global var but not a static. In acceptsForeground, you just check this global var defined in the hand and to be sysmod, false return.

  Will seek some of the discovered books recently, in order to aim to post 2 days a week only I think that in the future.

  TKS

  J

• Error message "please connect a device supported" when I click on webcam

  I have a DELL vostro 1015.It was big enough. Only problem is that today ' today I clicked on my webcam because I wanted to use it, and it gives me the error message above. I have NO idea what. Please help me find a solution.

  And if possible, let me know how I can get the games on my laptop - I got zip! Nada! Not even the hearts, one of my favorite special

  Hi EileenCK,

  Step 1: Run the fixit available in the link below to diagnose and fix problems with the webcam automatically

  Hardware devices not detected or does not

  http://support.Microsoft.com/GP/hardware_device_problems/en-us?EntryPoint=lightbox

  Step 2: You can download and install the latest drivers for Webcam and utilityfrom the DELL link below

   

  Link drivers DELL

   

  A similar issue was addressed in the DELL community below link; You can see the steps

  http://en.community.Dell.com/support-forums/laptop/f/3518/p/19271842/19476201.aspx

   

  You can check with DELL to known problems

  http://support.Dell.com/support/index.aspx

   

  With regard to your gambling problem

   

  Game of hearts is available in Windows 7; Follow the steps mentioned in the link below to install Windows games. If you referring to other games, you can download them from the internet, use your search engine preferred to look for the games.

  Install a game in the Games folder

  http://Windows.Microsoft.com/en-us/Windows7/install-a-game-in-the-Games-folder

  Note: Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to print, error message local print spooler service does not spoller restart or reboot machine.

  whenever I hit print, an error message appears "before you can preform task printer for example page put in place or to print a document, you need to install a printer now?" when well even I had an OKI c110 installed. so I tried to reinstall it. I clicked 'YES' then the error message says "windows can't open add printer." the local print spooler service isn't runniong. Please restart the spooler or restart the machine.  I did all the above but only can get it to start.  Please help me, I depend on my printer.

  You can also run the troubleshooting of the printer.

  Open the printer Troubleshooter

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems:

  http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

  Run the printer difficulty of:

  http://support.Microsoft.com/GP/printing_problems?EntryPoint=WHHT

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

• Lexmark X 6675 printer name and there is an error 0 x 00000709

  Dear Sir, I have a printer in his name and the details are below:-

  Name of the printer is lexmark X 6675
  There is an error 0 x 00000709
  so, should I do it please solve the problem.

  I suggest you to uninstall and reinstall the latest compatible drivers for Windows 7.

  You can also run the troubleshooting of the printer.

  Open the printer Troubleshooter

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems: http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

  Run the printer problems to: http://support.microsoft.com/gp/printing_problems?entrypoint=WHHT

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

• error Java install ADR

  upgrade of application of apex 4.2.1 plsql for apex mod 5 and ADR on an installation of OEL 5.9.

  Apex installed 5.  installation of ords.war according to the docs

  https://docs.Oracle.com/CD/E37099_01/doc.20/e25066/install.htm#AELIG7019

  According to the pre-reqs Ive got 1.6 build 20

  Java $ [oracle@orcldub819 ADR] - version

  Java version "1.6.0_29 - ea.

  Java (TM) SE Runtime Environment (build 1.6.0_29 - ea - b08)

  Java for 64-bit Server VM (build 20, 4 - b01, mixed mode)

  [oracle@orcldub819 nico2277] $

  I still get the following error...

  Java $ [oracle@orcldub819 ADR] - jar ords.war

  Exception in thread "main" java.lang.UnsupportedClassVersionError: oracle, dbtools, jarcl, Entrypoint: version unsupported major.minor 51.0

  at java.lang.ClassLoader.defineClass1 (Native Method)

  at java.lang.ClassLoader.defineClassCond (unknown Source)

  at java.lang.ClassLoader.defineClass (unknown Source)

  at java.security.SecureClassLoader.defineClass (unknown Source)

  at java.net.URLClassLoader.defineClass (unknown Source)

  to java.net.URLClassLoader.access$ 000 (unknown Source)

  java.net.URLClassLoader to $1.run (unknown Source)

  at java.security.AccessController.doPrivileged (Native Method)

  at java.net.URLClassLoader.findClass (unknown Source)

  at java.lang.ClassLoader.loadClass (unknown Source)

  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (unknown Source)

  at java.lang.ClassLoader.loadClass (unknown Source)

  The main class is not found: oracle.dbtools.jarcl.Entrypoint. Program ends.

  [oracle@orcldub819 nico2277] $

  
  

  
  

  I tried to run on another machine with a version of the JDK 1.7 and it worked but I want to get on this machine and run side by side for the upgrade of the 4.2.1 existing so am reluicatant draw 1.7 last because he will crush my java version existing prod which I don't want to do until the migration of apex 5 install to production.  Suggestions?
  

  Is not a matter of APEX, you would be better of this Oracle ADR forum post...

  Thank you

  Tony Miller
  Software LuvMuffin
  Salt Lake City, UT

• ADR 3 404 error

  I tried to install 3 ADR and get a 404 not found error. I enabled the debug print to the screen and get the error below (in the stack trace). I get when running in standalone and via Tomcat.

  oracle.dbtools.http.errors.NotFoundException
  at oracle.dbtools.url.mapping.URLMappingsProvider.map(URLMappingsProvider.java:79)
  at oracle.dbtools.url.mapping.filter.URLMappingFilter.doFilter(URLMappingFilter.java:55)
  at oracle.dbtools.http.filters.FilterChainImpl.doFilter(FilterChainImpl.java:51)
  at oracle.dbtools.http.locale.LocaleFilter.doFilter(LocaleFilter.java:60)
  at oracle.dbtools.http.filters.HttpFilter.doFilter(HttpFilter.java:45)
  at oracle.dbtools.http.filters.FilterChainImpl.doFilter(FilterChainImpl.java:51)
  at oracle.dbtools.http.cors.CORSResponseFilter.doFilter(CORSResponseFilter.java:71)
  at oracle.dbtools.http.filters.HttpResponseFilter.doFilter(HttpResponseFilter.java:45)
  at oracle.dbtools.http.filters.FilterChainImpl.doFilter(FilterChainImpl.java:51)
  at oracle.dbtools.http.errors.ErrorPageFilter.doFilter(ErrorPageFilter.java:71)
  at oracle.dbtools.http.filters.HttpFilter.doFilter(HttpFilter.java:45)
  at oracle.dbtools.http.filters.FilterChainImpl.doFilter(FilterChainImpl.java:51)
  at oracle.dbtools.http.ecid.ECIDFilter.doFilter(ECIDFilter.java:35)
  at oracle.dbtools.http.filters.HttpFilter.doFilter(HttpFilter.java:45)
  at oracle.dbtools.http.filters.FilterChainImpl.doFilter(FilterChainImpl.java:51)
  at oracle.dbtools.http.filters.Filters.filter(Filters.java:46)
  at oracle.dbtools.http.entrypoint.EntryPoint.service(EntryPoint.java:74)
  at oracle.dbtools.http.entrypoint.EntryPointServlet.service(EntryPointServlet.java:46)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:790)
  at oracle.dbtools.rt.web.HttpEndpointBase.dispatchableServices(HttpEndpointBase.java:166)
  at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:88)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:790)
  at org.eclipse.jetty.servlet.ServletHolder.handle(ServletHolder.java:751)
  at org.eclipse.jetty.servlet.ServletHandler.doHandle(ServletHandler.java:566)
  at org.eclipse.jetty.server.session.SessionHandler.doHandle(SessionHandler.java:219)
  at org.eclipse.jetty.server.handler.ContextHandler.doHandle(ContextHandler.java:1111)
  at org.eclipse.jetty.servlet.ServletHandler.doScope(ServletHandler.java:498)
  at org.eclipse.jetty.server.session.SessionHandler.doScope(SessionHandler.java:183)
  at org.eclipse.jetty.server.handler.ContextHandler.doScope(ContextHandler.java:1045)
  at org.eclipse.jetty.server.handler.ScopedHandler.handle(ScopedHandler.java:141)
  at org.eclipse.jetty.server.handler.ContextHandlerCollection.handle(ContextHandlerCollection.java:199)
  at org.eclipse.jetty.server.handler.HandlerCollection.handle(HandlerCollection.java:109)
  at org.eclipse.jetty.server.handler.HandlerWrapper.handle(HandlerWrapper.java:98)
  at org.eclipse.jetty.server.Server.handle(Server.java:461)
  at org.eclipse.jetty.server.HttpChannel.handle(HttpChannel.java:284)
  at org.eclipse.jetty.server.HttpConnection.onFillable(HttpConnection.java:244)
  at org.eclipse.jetty.io.AbstractConnection$2.run(AbstractConnection.java:534)
  at org.eclipse.jetty.util.thread.QueuedThreadPool.runJob(QueuedThreadPool.java:607)
  at org.eclipse.jetty.util.thread.QueuedThreadPool$3.run(QueuedThreadPool.java:536)
  at java.lang.Thread.run(Thread.java:745)
  

  Solution:

  Change the params/ords_params.properties file, and then make the following changes:

  Value: rest.services.apex.add = true

  If you don't want to be prompted for passwords, add the following lines:

  User.apex.listener.Password = Oracle

  User.apex.restpublic.Password = Oracle

  Where 'oracle' is the user password. Change accordingly.

• Subject: healthreport, about: preferences, about: newtab all give the same error message: the URL is invalid and cannot be loaded. All this since the last update

  Whenever I select all: preferences? entrypoint = menubar #sync, about: healthreport, about: preferences, about: newtab, I get the same error message: "the URL is invalid and impossible to load. All this since the last update tot 50.0 FF. I have tried refreshing Firefox, but to no avail. Help, please. Best regards, mauver

  Hi FredMcD,

  You are the hero of the day. Well, everything seems to work again with the exception of my best websites (which should open when I click on new-tab). But it's only a minor problem and I can easily restore that manually.

  Thanks for your help,

  Mauver

• error with ConfigureGC.pl script

  Hi I have installed enterprise grid control 10.2.0.5 SUSE 10 (64-bit), I want to configure the installation of control Grid by using the Perl ConfigureGC.pl script, but get the following error:
  
  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  Oracle@gridcontrol:~/product/oms10g/opmn/bin >/opt/oracle/product/oms10g/perl/bin/perl /opt/oracle/product/oms10g/sysman/install/ConfigureGC.pl/opt/oracle/product
  Home directory: / opt/oracle/product
  There is no file. Cannot rename
  
  Run the Configuration Wizards from ito:
  
  Running configuration wizards using the following command:
  /opt/Oracle/product/oms10g/Oui/bin/runConfig.sh INV_PTR_LOC=/opt/oracle/product/oms10g/oraInst.loc ORACLE_HOME = / opt/oracle/product/oms10g ACTION = set MODE = perform COMPONENT_XML = {encap_oms.1_0_0_0_0.xml} RESPONSE_FILE = / opt/oracle/product/agent10g/responsefile
  perform - mode starts for the action: set up
  
  
  perform - mode completed for action: Configure
  
  You can see the log file: /opt/oracle/product/oms10g/cfgtoollogs/oui/configActions2009-12-07_08-44-43-PM.log
  
  Configuration wizards failed with errors. See log above.
  For more details, also check/opt/oracle/product/oms10g/cfgtoollogs/cfgfw/CfmLogger_ < LATEST_TIME_STAMP > .log
  
  
  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  
  
  the log shows this:
  
  ----------------------------------------------------------------------------------
  ions2009-12-07_08-44-43-pm.log
  ###################################################
  The configuration of the action which is in
  ------------------------------------------------------
  The plugin Web Cache Configuration Wizard runs
  
  2
  Smi manipulation() failed.
  A problem occurred reading the configuration and store it in the rep
  physical
  Resolution:
  Please refer with the exception of basis for the resolution, or call Oracle technical support.
  Base exception:
  * / opt/oracle/product/oms10g/Apache/Apache/bin/httpd: error loading shared l
  ibraries: libdb.so.2: cannot open shared object file: no such file or directory *.
  Resolution:
  Please make sure that the values entered in the configuration files of OSH are correct.
  oracle.ias.sysmgmt.exception.InvalidConfigurationException: Base Exception:
  / opt/oracle/product/oms10g/Apache/Apache/bin/httpd: error loading shared l
  ibraries: libdb.so.2: cannot open shared object file: no such file or directory
  Resolution:
  Please make sure that the values entered in the configuration files of OSH are correct.
  to oracle.ias.sysmgmt.repository.plugin.advanced.apache.StateTranslator.
  checkConfigFileValidity (unknown Source)
  at oracle.ias.sysmgmt.repository.plugin.advanced.apache.StateTranslator.validateConfigDuringEvaluate (unknown Source)
  at oracle.ias.sysmgmt.repository.plugin.advanced.apache.PlugInImpl.localConfigValidation (unknown Source)
  at oracle.ias.sysmgmt.repository.DcmPlugin.localConfigValidation (unknown Source)
  at oracle.ias.sysmgmt.repository.RepositoryImpl.performLocalValidation (unknown Source)
  at oracle.ias.sysmgmt.repository.SyncUpHandler._updatePluginConfigData (unknown Source)
  at oracle.ias.sysmgmt.repository.SyncUpHandler.syncUpFromLocalFiles (unknown Source)
  at oracle.ias.sysmgmt.repository.RepositoryImpl.syncUpFromLocalFiles (unknown
  Source)
  at oracle.ias.sysmgmt.utility.editpropagator.PropagateLocalEdit.repositoryInit (unknown Source)
  at oracle.ias.sysmgmt.persistence.utility.PMUtility.initConfiguration (unknown Source)
  at oracle.ias.sysmgmt.task.TaskMaster.initConfiguration (unknown Source)
  at oracle.ias.sysmgmt.task.TaskMaster.sysInit (unknown Source)
  at oracle.ias.sysmgmt.task.TaskMaster.sysInit (unknown Source)
  at oracle.ias.sysmgmt.task.InstanceManager.sysInit (unknown Source)
  at oracle.ias.sysmgmt.task.InstanceManager.init (unknown Source)
  at oracle.ias.sysmgmt.EntryPoint.init (unknown Source)
  at oracle.ias.webcache.config.WebcacheConfig.smiSetup(WebcacheConfig.java:483)
  at oracle.ias.webcache.config.WebcacheConfig.smiEnableWebcache(WebcacheConfig.java:454)
  at oracle.ias.webcache.config.WebcacheConfig.enableConfiguration(WebcacheConfig.java:299)
  at oracle.ias.webcache.config.WebcacheConfig.main(WebcacheConfig.java:87)
  
  The plugin Web Cache Configuration Assistant failed his method
  ------------------------------------------------------
  The configuration of the action doesn't have its method
  ###################################################
  
  Why can not load shared libraries: libdb.so.2?
  
  Thank you for any response

  OK, so I have something:

  In SUSE Yast allows to search packages provides 'libdb.so.2': in my SLES 10 SP2 x84_64 theese are the 'db1' packages and "32-bit db1". "."
  Workaround with link to libgdbm.so.2.0.0 - it is for RedHat and HR clones (CentOS, etc..)

  So, you must install the package db1 for architecture i386 and x86_64 times.

  And you'll see links like this:
  /usr/lib/libdb.so.2-> libdb - 1.85.so
  /usr/lib64/libdb.so.2-> libdb - 1.85.so

  I did my test with SLES 10 SP2 server specifically.

  Good luck.

  ----
  Pavel
  Ghost.DBA at blogspot.com

• Uninstall software update Apple says error in seller contact package package unstaller

  Try to get itunes working to make a backup of my faulty iphone before repair.

  First-itunes does not start says error. I'm trying to fix it, who said success but same error when you try to start it.

  Then uninstall completely worked. Then reinstall that seemed to be over except for a message "an older version of Apple software update already exists" then he went down and install itunes apparently had not been completed.

  Then I try to remove the update from the apple software and executed by an error in the installation program - it says there is an error in the installation and contact the supplier of the installation package. Same error if I run the uninstall command line program.

  Try to repair the Apple Software Update of programs & features Control Panel and then try to update iTunes again.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2