envy dv7 product # 2H77UA #ABA: 32 GB WSSD and Windows 10

Similar Questions

• Envy dv7 Motherboard upgrade successful... sort of.

  Hi all

  I'm working on a laptop HP Envy dv7 - 7227cl.  I replaced the motherboard and have now two questions... one is that the system requires an activation again.

  The other is that the new motherboard will not charge the battery... It wasn't a problem on the old motherboard...

  Battery test told me that the battery failed the test when you use hardware diagnostics from the bios.

  I don't have another battery to test with.

  I know that the original motherboard is a 682220-501 (part number of HP), and the news he gave me is a 682220-001... Could it be the problem?

  Any other ideas on what to check?

  Hello

  Definitely Yes, it's the problem. The original card is for portable following products/models:

  HP DV7-7234NR ENVY LAPTOP PC
  HP DV7-7238NR ENVY LAPTOP PC
  HP ENVY DV7 LAPTOP PC - 7333CL
  ENVY of HP dv7 - 7223cl NOTEBOOK PC
  ENVY of HP dv7 - 7227cl NOTEBOOK PC
  ENVY of HP dv7-7230us NOTEBOOK PC
  ENVY of HP dv7-7233nr NOTEBOOK PC

  and the second card of mother is for models following/products

  HP PAVILION DV7-7010US LAPTOP
  LAPTOP HP PAVILION DV7 - 7023CL
  HP PAVILION DV7-7115NR LAPTOP
  HP PAVILION DV7-7121NR LAPTOP

  They are all DV7 but the first series are all models of envy and the second series all models Pavilion.

  Kind regards.

• HP Pavilion dv7 Notebook PC: dual band wifi adapter card required for HP Pavilion DV7 - 6157cl, product # LW465UA #ABA

  I would like to replace an a single band with a dual band wifi wifi adapter card for HP Pavilion DV7 products - 6157cl # LW465UA #ABA.  A6 - 3400M = AMD processor.

  Help?

  Thank you.

  Hey @dct1954 ,

  I called support and they confirm that even if it shows that it will be compatible, there will be a problem. They recommend using a USB dongle to give you the 5 GHz, you need.

  Thank you.

• HP ENVY DV7-7212nr motherboard Possible failure?

  HP DV7-7212nr ENVY

  ------------------------

  • Windows 8 (factory) upgraded to Windows Pro 8.1 thru Windows Store.
  • 8 GB RAM DDR3
  • NVIDIA GeForce GT 650M 2 GB GDDR5
  • 750 GB HARD drive with 32 GB WSSD Cache
  • Ralink RT3290 wireless card (beginning to remove connections a few days before this happened)

  Last night, I was using my laptop normally and he sat to play a game. During the game, he's dead, and not even think, I just returned it to my office for the next day.

  Well, today, I rebooted it and went to turn it on and I have almost nothing! The power light stays on and the hard disk activity is solid for about 2 seconds then turn off. The screen is blank, there is no blinking or beep codes and the WiFi light does not change color indicating that the computer has at least started.

  Being a computer scientist, I removed the RAM and reinstalled it. That did not help. I also tried to boot without the hard drive is connected. That does not help either. I also tried the Win + B BIOS recovery with my hard drive and a USB drive and no luck there dry. The last (possibly) worst part is... I removed the RAM and lit without it and still, no code blink or beep.

  At this point, I believe that my laptop has a failed motherboard, but I'm just checking from now until I have the chance to call HP support if there is anything else I can try. My warranty expires in three weeks only, if at least it happened before, not after.

  In addition, no one knows the direct phone number to the HP support which is on the ground in the USA. I never had a good turn-out speaking with the support of offshore and would like to work with someone who can help me better right off the bat.

  Thank you!

  --------------------
  Please click on "Bravo" to show your appreciation for me.

  If this response worked, please mark this reply as an answer.

  I agree, not getting an error with ram removed is a disturbing sign. With regard to the contact options I suggest filling out the form at the bottom of page. That should give you the choice of phone number or the Chat option to contact Technical Support.

  https://support.HP.com/us-en/contact-HP/product/HP-envy-dv7-7200-notebook-PC-series/5296050/model/5309490

• HP Envy Dv7-7255dx could not use records to Support HP; All testing equipment

  Hi all

  I'm trying to fix my friend computer that crashed about 2 weeks ago.

  My current problem is that the system recovery disks did not work at all on the 3 times I tried the system restore on this device.

  I think there may be a BIOS problem, because it's the only option in addition to the hardware failure I try hard.  I contacted HP support to try to get the BIOS update file or a file of recovery, and they said that they cannot provide for me, so my only option with HP is to send in support and the unit is out of warranty.

  The main thing I am looking for is the BIOS file so that I can reinstall the BIOS to see if it's actually the question before having to spend money to get this repaired laptop.

  I searched a lot and have been unable to find any BIOS file for this exact model, so if anyone has any ideas as to where I could find it, or should I try, it would be greatly appreciated.

  Model: HP ENVY dv7 Notebook PC

  Product ID: C6N73UA #ABA

  BIOS Date: 03/10/2013

  BIOS version: F.29

  Thank you!

  Install fresh new windows, removing all partitions, and you will have 0 problems.

• DV7 - 4087CL; WQ637UA #ABA: 582564-001 issue of card Broadcom WiFi?

  Need help on compatibility & WiFi cards please:: work number HP 582564-001 - Broadcom 43224agn - Mini Pci-e card network in my laptop? I have a DV7 - 4087CL; WQ637UA #ABA...   I see this part listed in my service manual, 4322 Broadcom 802.11a/b/g/n WLAN module ... However, there are No. appearing beside it in the manual part number... It is indeed 582564-001?

  Thanks, Frank

  Hello:

  You can find the list of cards supported with HP part numbers in Chapter 3 of the service wireless manual pp 25-26.

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us & dlc = in & lc = in & product = 4221685 &

• Want DV7 7255 DX: Can I put RAM in HP Envy DV7 7255 DX

  I have a HP DV7 want 7255 DX, and I look to updrade significantly the amount of RAM. I don't know if I can even update, and if I can improve, how much more I can put in. Here are the specs curent:

  Laptop product #: C6N73UA #ABA

  Curent RAM: 6 GB DDR3 SDRAM (2 DIMM)

  Slot 1: 2 GB Samsung 1600 MHz

  Slot 2: 4 GB Samsung 1600 MHz

  I would like to replace the very minimum, current 2 GB with a 4 GB key (the same as the current 4 GB in there), to have a total of 8 GB. I would also consider that, by replacing the two slots with 8 GB sticks for a total of 16 GB. It looks like my OS is fine with that, just do not know if the motherboard would be able to use it. (IE: I don't want to put in more can be used and only waste money on it, if 8 GB is the maximum).

  I recently installed Avid editing software and it says I need a minimum of 8 GB to operate effectively. I also have Virtual PC installed to run a hidden player XP for old software that I still use, and I noticed a considerable delay in all that done in windows 8.1 while virtual drive is running simultaneously. I suspect that this could be also related to the not enough RAM.

  Bottom line: is it possible to put the amount of RAM, and if so, how can I put it? Thanks in advance for your help.

  I understand that in the certified modules like the original HP or Kingston, manufacturers already proposed this setting, so it's very unlikely for 16 GB hot much more than 6 GB original.

• SSD for HP ENVY dv7 Notebook PC

  Product name: HP ENVY dv7 Notebook PC

  Product number: D1A32UA #ABL

  64-bit Windows 8

  I would replace the C drive with an SSD (size 256G). Recommendations on disc compatible or recommended? Thank you.

  Jake1700 wrote:

  Thank you very much for the reply. Problems of compatibility with resection I expect the drive size (in GB)? Thank you.

  I don't think so. The only problem, what could happen is that the recovery disks don't work because the original hard drive was too big. However, this is not a problem. You can perform a new installation using the original version of Windows and the product key from the sticker on the laptop. In this case do not activate it online but wait for an activation message (activate by phone) who wakes up early after the new installation.

• HP pavilion product # BK462AA #ABA need new hard drive

  I have hp pavilion product # BK462AA #ABA Model P6517c which is a failure to the smart test. I need to replace the hard drive but I'm having a hard time finding one. Can you tell me what hard drive could run to replace this model? It may be an improved version of what I have have(500gb) now. Never had this problem with Sony computers...

  Hello:

  You can install any desktop hard drive SATA II/III 7 200 rpm of 500 GB to 1 TB.

  Some recommendations...

  Best - Western Digital Caviar Black

  Good - Western Digital Caviar Blue

  http://www.Newegg.com/product/ProductList.aspx?submit=Ene & N = 100007603% 2050001306% 20600003340 & IsNodeId = 1 & name = 7200% 20RPM

  Paul

• laptop WQ671UA #ABA: wireless driver for model: G72-260US product: WQ671UA #ABA Windows 7

  Could guide you please download driver wireless for the G72-260US model, product: WQ671UA #ABA, whose number for wi - fi?

  Hello:

  The list of the parts for your model indicates that it is a Realtek RTL8191SE 802.11b/g/n WiFi adapt.

  Therefore, you should use this driver for this card:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102574-2 & CC = US & DLC = in & LC = on & os = 4063 & Product = 4217273 & sw_lang =

• Product #: H5Q13AA #ABA, bad driver for hp device. CdRom SATA DVD has DS8A9SH

  Hello, my HP Pavilion 23 (product #: H5Q13AA #ABA) suddenly had his CD/DVD-Rom stop working.

  It's an hp device. CdRom SATA DVD has DS8A9SH.  I tried uninstalling the driver and using the HP troubleshooting tool.  Nothing seems to work.  Any suggestions?  The player is acting normally, apart from the computer not recognize (the disc spins when you put it in, etc.).

  I am running Windows 8.1 with all updated.

  When I try to update the driver, Windows says that it is up-to-date.  It gives me this error message in Device Manager:

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Thanks in advance!

  Hello:

  Please read the info at the link below.

  One of the steps of resolution, 2, 3, 4 or 5 should solve the problem.

  http://support.Microsoft.com/kb/314060

• Envy dv7: SimplePass Windows 10 Finger Scanner does not

  I installed Windows 10 months. I recently installed a "critical" update  After the installation of the system, my icon 'start' at the bottom left of my screen don't work anymore. My SimplePass is no longer turned on or worked.

  I did a system restore on the eve of the critical update.   I still can't use SimplePass.

  Is this a known bug?  Any suggestions?

  Thank you.

  HP ENVY dv7 Notebook PC model system

  System Type x 64-based PC

  System SKU B6B75AV

  Processor Intel Core i7-3630QM CPU @ 2.40 GHz, 2401 Mhz, 4 Lossnay 8 logical processors

  BIOS Version/Date Insyde F.29, 10/03/2013

  SMBIOS Version 2.7

  Embedded Controller Version 52.24

  UEFI BIOS mode

  PCR7 Configuration binding is not Possible

  Windows C:\WINDOWS directory

  System directory C:\WINDOWS\system32

  Boot Device \Device\HarddiskVolume2

  Hardware Abstraction Layer Version = "10.0.10240.16392".

  Physical memory (RAM) installed 12.0 GB

  11.9 GB total physical memory

  9,08 GB available physical memory

  13.7 GB total virtual memory

  10.7 GB available virtual memory

  I typed "SimplePass" in research on the information system, and this is what was posted:

  Path C:\ProgramData\Oracle\Java\javapath; C:\Program Files (x 86) \HP SimplePass\x64; C:\Program Files (x 86) \HP SimplePass\; C:\Program Files (x 86) \NVIDIA Corporation\PhysX\Common; C:\Program Files (x 86) \Intel\iCLS Client\; C:\Program Files\Intel\iCLS Client\. C:\Windows\System32; C:\Windows; C:\Windows\System32\Wbem; C:\Windows\system32\WindowsPowerShell\v1.0\; C:\Program Files (x 86) \Windows Live\Shared; C:\Program Files\Intel\Intel (R) engine management Components\DAL; C:\Program Files\Intel\Intel (R) engine management Components\IPT; C:\Program Files (x 86) \Intel\Intel(R) Components\DAL to engine management; C:\Program Files (x 86) \Intel\Intel(R) Components\IPT to engine management; C:\Program Files (x 86) \Intel\OpenCL SDK\2.0\bin\x86; C:\Program Files (x 86) \Intel\OpenCL SDK\2.0\bin\x64; C:\Users\Sally\AppData\Local\Smartbar\Application\;%SystemRoot%\System32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SystemRoot%\system32\WindowsPowerShell\v1.0\

  Hello @SymKat,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I stumbled upon your post on the fingerprint reader and wanted to help!

  Try uninstalling the driver and let your search system to a compatible driver.  You can use this link to help you, if needed: how: install and update drivers in Windows 10

  If you're still having problems, then try to review the following document and let me know how it goes: HP Notebook PC - a (Windows 8) fingerprint reader troubleshooting

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Kind regards!

• HP ProBook 640 G1: Upgraded hardware Hp ProBook 640 G1, product: K4L16UT #ABA

  Laptop Hp ProBook 640 G1, product: K4L16UT #ABA
  
  Hi, I want to know 3 things:
  
  (1) can I upgrade my hardware like processor, graphics card, etc?
  
  (2) I have 4 GB of ram in 1 memory, if I buy 8 GB wan and add in the second port I get directly 12 GB?
  
  (3) if I upgrade my ram memory, help for my graphics memory?
  
  Answer in order and for number please
  
  Thank you very much! I appreciate your help!

  Saraiva.

  1 graphics no, yes processor. "Page 32 in your manual. »

  Yes 2. memory. " Page 4 of your guide. »

  3 so it's not going to help.

  Go into your BIOS and make sure you have 512 MB active.

  

  Your manual here.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/manualsResults/?sp4ts.oid=5405392&spf_p.tpst=psiContentResults&spf_p.prp_psiContentResults=wsrp-navigationalState%3Daction%253Dmanualslist%257Ccontentid%253DService-and-maintenance%257Clang%253Den&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  REO

• Dv7 - 7333cl envy: Boot Device not found (3FO) after 8 of Windows Restalling of recovery disks

  Hello

  The hard drive on my dv7 desire - 7333cl just died after upgrading my windows 8.1 to 10. I bought a new SSD and I replaced the drive. I could not find the recovery discs, that I did when I got the PC, so I ordered new HP according to the recommendations of other threads with the understanding that they would be able to reinstall windows on the new drive.

  Given the shipping time would take a long time, until I tried to reinstall Windows 8.1 using the file .iso Windows 8.1 image official of Microsoft. It seemed to install properly, read the product automatically key and everything, but I could not get the machine to start, so I decided to wait for the HP recovery discs.

  Well I had the disc a few days ago and reinstalled the original image on the new drive. Problem is that when the computer reboots, I get error no matter what I try. The errors vary according to which of the steps I tried below, but I was never able to start Windows, except once when the Windows 8 BSOD loops and restarts automatically before I can even read.

  Here are the steps I've already tried:

  -Performed a hard reset (power adapter and battery removed, taking the power for 30 seconds button)

  -Run the diagnostic system HP based on the SSD (spent) and memory (spent)

  -Secure boot disabled (and re-enabled, cleared the keys, keys reloaded, etc.)

  -Enabled legacy support (and disabled)

  -Bios reset to original settings (F9) is then repeat above steps in various orders

  -Reinstalled two times more than original image

  At this point, I was wondering if the drive has not been formatted from the recovery disk and multiple files to start causing problems, so I started in Parted Magic with UBCD and reformatted the entire hard drive (0 s to write to disc) and again reinstalled original image. Still nothing so I told all the steps above in random orders to try to turn it on.

  If I start in the boot options, I can see the SSD, but it still won't start. Does anyone have more ideas for me to try? The fact that it passes all the tests and that it is running the Linux of Parted Magic environment suggests that everything works fine, but for some reason any Boot file does not load.

  Did I lose money on the HP recovery discs and he just bought my own Windows OEM license?

  I'm going crazy trying to figure this out. I am relatively experienced with the PC, but it's my first time work with the architecture of the UEFI Windows 8 so maybe there is something obvious that I'm missing?

  Thanks for any help.

  FINALLY SUCCESS!

  After a lot of frustration and several reboots, partitions, reinstall, and trips to Best Buy, that I care to remember I'm typing this from my stable work feel LIKE to the point Windows 8.1. Currently 10 Windows to download and install all updates, but everything seems to be stable.

  To make a long story short:

  -Be sure to carefully read the product manual

  I never would have guessed that this system would support only a 160 or 180 GB SSD. If I had of known that I would have probably never had any serious problems.

  -Instead of order recovery HP discs just to download the ISO of Windows 8

  I'm not the first person to have problems with these discs (search this forum for the many complaints), so unless desperately want the included HP tools and bloat, just to get a file from Microsoft (FREE!). There is no reason why it shouldn't work and I wish I would have went with my gut here and saved a bit of money.

  -Be persistent if you can't find the question

  I was told, many people, that the machine was bricked up. At that time, I was obsessed with the implementation because no one could tell me why it would not.

  Thanks for reading! And if you encounter a similar error, good luck.

• The HP Envy dv7 - 7323cl has a double hard drive Bay

  The HP Envy dv7 - 7323cl has a double hard drive Bay?

  Hello

  Yes, it can accommodate a second HDD.

  Kind regards.