ENVY of HP dv7 7230us repair - HELP!
Hello
I am trying to replace my screen and processor, motherboard and having all kinds of problems. First my camera fell. During the re-booting I noticed the screen turned white, but the cooling fan has been executed and the charging light was still on. I also noticed that the cover lock blinking continuously and the wifi was on but orange. Since she was an ssd that I couldn't tell if the drive worked except the small led on the side front right was on. I then shut the machine down, not connected the power adapter, took out battery and not connected to the RTC battery. Then, I pressed the power button down for 30 seconds to erase all stored tension. I then reconnected the battery RTC, the AC adapter and the battery. After re-booting, the screen turn black. The caps lock blinking continuously and the wifi was on but orange. Essentially the description above. I bought a new view compatible, used ENVY dv7 7000 series motherboard and a processor AMD A10. The original processor was an A8. I then reinstalled everything and even put the hard drive installed in the factory, Toshiba 750 g, I got the same results as before. This time, I could actually hear spinning drive. If everything worked. I even tested the ram original in another machine and found it was good. I also plugged in a monitor and nothing. I am at a loss. I'm trying to send the Commission in Exchange for another. Anyone know what is happening here? I missed something? Would appreciate any input. Thank you
Al Hebert
In addition, the original processor, AMD A8-4500 Series, has 2 functions? CPU and GPU or is it just a GPU or CPU. I do not understand how it differs from the older processors. Thanks again
The relocation of the CROWD? I'm sorry what is a MOB. Yes, I remove the RTC battery. I tried to start it with and without the RTC.
Tags: Notebooks
Similar Questions
-
ENVY of HP dv7-7230us: HP DV7 disc includes six partitions - are they all necessary?
I am trying to create a system image to save laptop my mother using Macrium after receiving a SMART disk error. It is to show that the hard drive has 6 partitions:
1, WinRE (none)
Primary NTFS
235.3 MB
400,0 MB
2. NO NAME (none)
Primary FAT32 (LBA)
104.6 MB
260,0 MB
3. (none)
Unformatted primary
128.0 MB
128.0 MB
4 (C
Primary NTFS
541.21 GB
670.92 GB
5 (none)
Primary NTFS
274,6 MB
350.0 MB
6 RECOVERY (D
Primary NTFS
22.86 GB
26.60 GB
Are these really necessary? I understand that one or possibly many may have to do with Bitlocker, but the #3 partition in particular looks like it's just foreign. It's not like she's taking a lot of space, but it seems unnecessary.
Thank you
ENVY of HP dv7-7230us Notebook PC
Model: C2N66UA
Hi there @infohack
Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.
I can certainly understand your concern about this mix of partitions, and I am happy to help you with this.
As a first step, this page: partitioning and naming of readers (Windows 8)
There is also this post of @Daniel_Potyrala , even if reference is made to windows 7, it is loaded with useful information that applies to windows 8 as well. Its theme is more on the preparation of another drive with partitions, but this part of the update, there is information on the purpose of most of the partitions that you ask the subject.
How to repartition the disk HARD of HP notebook with pre-installed Windows 7
Since some of the partitions you listed are not labeled, it is difficult to tell what some of them are, but in a UEFI environment, it is possible one of those is a part of this environment. The recovery partition would have your plant to install the image. I would recommend you do a CD set of recovery as well via the recovery manager. You can make only one series.
I hope this helps a little.
-
Envy of HP dv7-7230us: Microsoft Updates
After the installation of Win 8 x 64 and reboot the PC so that he could finish and configure updates, it stopped at 12% and gave me one, message "can't set updates, goes back to the files please do not turn off computer. He remained in a loop of reboot and shutdown at 12%.
I used partition magic to delete a partition off my dying HDD which had 8.1 installed and copied on a new HARD drive. The reason for this, I tried to install Win 8 at the new disk of six disks I made from when I first bought the laptop. I couldn't install it for nothing, I tried the 'prompt com' approach to fix the mbr, tried to start options, auto repair, etc. I noticed 8.1 had an extra partition which was the same size with different data, use percentage, so I thought it was to win 8 before I upgraded to 8.1. I copied on a new hard drive and the installation disc started to load, and history was made.
-
ENVY of HP dv7-7230us: DOUBLE BOOT 8.0 and 8.1?
Is it possible to dual boot Windows 8.1 with Windows 8?
not_to_happy wrote:
Is it possible to dual boot Windows 8.1 with Windows 8?
Hello
Windows 8.1 is more or less updated to Windows 8. The only way how to make a dual boot these two is to buy a license retail of Windows to get a new system with the OEM installed by default in. The version of Windows 8 must have disabled Windows updates in order to ensure that it does not refresh to Windows 8.1. I see no logical reason why having a dual boot like this. It's like a dual boot with Windows 7 and Windows 7 SP1.
-
Envy of HP dv7-7230us Notebook: \EFI\MICROSOFT\Boot\BCD
I did 6 recovery disks for win 8 installed at the factory. I upgraded to 8.1, HDD started failing so I tried: external cloning, cloning of 2nd HARD drive in the Bay from 2nd and two of these operations failed. I formatted the HDD new and loaded my original win 8 and it says 100% installed then rebooted and said that he could not find \EFI\MICROSOFT\Boot\BCD. Please, I need one direction other than jumping off a cliff.
For the reason that there is no problem without a solution, you can try this thread(even if Windows 7), but apply the same principles? Good luck and do not skip!
-
How to remove an HP Envy dv7-7230us bezel?
Recently, I cracked the screen on my computer laptop dv7-7230us of HP Envy and wonder how to remove the bezel to change my screen. I see no screws to screw to replace the broken screen.
A video tutorial is usually the best way to go.
The best way to find a way to do is to go to youtube.com and search for replacement of the HP Envy dv7 screen.
You can also usually find at insidemylaptop.com.
-
Envy of HP dv7 7073ca Windows Recovery Environment help!
- Envy of HP dv7 Notebook PC running on Windows 8
- Product number: C2H79UA #ABL
When I'm on the HP Recovery Manager screen I want to do a factory restore, but it says (disabled: recovery Partition is removed) but when I check the partitions on my laptop, there is a partition that says RECOVERY (D and Local disc (C.)) How can I do a factory restore?
Ok. Sorry to hear that you did not have serial or usb disk recovery recovery media.
This means that, unfortunately, in your case, than to buy a set of HP or send to drive hard reimage is your less expensive options.
It would be wise to buy a set of recovery disks or to ask if an instant multimedia usb HP rcovery disc is available for your laptop. At least this way, you would be not dependent on any other repair of your PC. You could do it yourself after reading a tutorial or watch a video on using the recovery media.
-
Want DV7-7230us: HP Envy DV7-7230us dual band wireless compatibility
Hi all -
I have a DV7-7230us that I've updated massively since the purchase at a great price about 3 years - new display, 500 GB SDD, Win10-Pro, memory maxed out, etc..
This laptop has all the abilities and raw power I need a laptop, but one thing that bothers me is the minimap original wireless in - it's single-channel video, 2.4 GHz a/b/g.
I would like to replace it with the Intel Dual Band Wireless-AC 7260 2 x 2 Networok/Bluetooth adapter (7260.HMWWB. (R), but I just want to ensure compatibility before you start down this path here - anyone had success and/or advice I should on this? If not compatible, does anyone know card dual band wireless compatible AC that works?
Thank you!
Hello
Your machine was built long before mid-2014, so the chance to upgrade the wifi card is slim to zero. There is a list on page 7 of the following document:
http://h10032.www1.HP.com/CTG/manual/c03591253.PDF
Option: AC USB wireless card is the way to go.
Kind regards.
-
ENVY of HP DV7 - replacing the screen 7230us
Just a few questions if you let it. Unfortunlsoately my laptop fell on the floor and the screen cracked. I have a new replacement on the way. Mind you, I replaced the screens of laptops before gently and smoothly. On each of them, in the place where the cable Ribbon which extends from the motherboard and attaches to the screen he is and was a warning label 'do not touch'. Take this warning seriously I've always avoided this and do not touch. On the WANT DV7-7230us the place where the ribbon cable connection is made it is difficult, but not impossible, to do not touch this area. It is a possibility, I might have to hold a small area to re - attach the cable on the new screen. My question is why he cannot be touched? I somehow damage the new screen if I accidentally touch or hold this area? Just one simple answer other than 'just don't touch' would be great. Thank you.
Al Hebert
ahebert wrote:
Just a few questions if you let it. Unfortunlsoately my laptop fell on the floor and the screen cracked. I have a new replacement on the way. Mind you, I replaced the screens of laptops before gently and smoothly. On each of them, in the place where the cable Ribbon which extends from the motherboard and attaches to the screen he is and was a warning label 'do not touch'. Take this warning seriously I've always avoided this and do not touch. On the WANT DV7-7230us the place where the ribbon cable connection is made it is difficult, but not impossible, to do not touch this area. It is a possibility, I might have to hold a small area to re - attach the cable on the new screen. My question is why he cannot be touched? I somehow damage the new screen if I accidentally touch or hold this area? Just one simple answer other than 'just don't touch' would be great. Thank you.
Al Hebert
Hello
I think that the warning "do not touch" is intended for the Board of LCD screen.
-
Dv7-7230us envy: envy dv7-7230us hard drive and drive cables
Hi, I'm a dv7-7230us which came with two bays for HARD drives and no secondary cable or caddy. Where can I get these items. Thank you
Hello
You can buy:
http://www.newmodeus.com/shop/index.php?Main_Page=product_info&products_id=498
Kind regards.
-
HP Dv7-7230us: all compatible APUs for Dv7-7230us
Hello, I've searched for APUs all compatible for my laptop which is a Dv7-7230us, and nothing helps I couldn't find. I just like a list of all compatible APU for her. I don't care if it is really long, it'll be really useful for me and I'm sure that for some institutions. AFAIK the A10 - 4600 m is compatible, but I would like to know if there is more than one, thank you for your time.
See page 1 of the HP ENVY dv7 Notebook PC Maintenance and Service of Guide for the list.
http://h10032.www1.HP.com/CTG/manual/c03591253.PDF
From the manual
-
I currently have the wireless Centrino 2230 adater. I would use the double band Centrino 6235. Is my cell phone compatible?
As the bus interface for these two devices is even, to my knowledge, it should be compatible. Here is a link that has the process to remove and replace the wireless adapter:
ENVY of HP dv7 Notebook PC Maintenance and Service of Guide -
Envy of HP dv7 7255dx: universal Bus controller and SM Bus controller
ENVY of HP dv7-7255dx Notebook PC
Model No.: C6N73UA serial number: (deleted content)
I installed Windows 7 Ultimate and now in Device Manager
SM Bus controller is missing
And no universal serial Bus controller is also missing.
How can I get back them?
Please contact me at:
(content removed)
Thank you
Joe
Hi, Joe:
You need these drivers to the SMBus and USB3 controllers...
This package contains the driver and Intel Chipset Installation Utility for the notebook models and operating systems. This utility allows the operating system to show the correct name for the Intel hardware that is installed in the Microsoft Windows Device Manager.
File name: sp56156.exe
This package provides the driver for the Intel USB 3.0 controller host for the notebook models and operating systems. The driver allows USB 3.0 devices.
File name: sp56164.exe
-
I have a request when it runs I get an error as follows:
"Display driver stopped responding and has recovered display Intel graphics driver Excelerator for Windows 7 (R) driver stopped responding and has successfully recovered."
Is it possible to assign this application for Nvidia graphic card instead of 4000 GPU Intel. If yes how to do this assignment.
Thank you
Here's what I had to do to get the graphics Performance at a level that would allow the Surfcam CAM application traditional 2015 work correctly:
Envy of HP dv7 - 7373ca required parameters for 2015 Surfcam traditional
Right-click on it to office;
Select the Nvidia Control Panel
- Setting the parameters of the Image: use the settings of the 3D Image.
- Manage 3D settings: NVIDIA High Performance processor
- Physx Config set: GeForce 650 M Graphics
Select the graphic properties (it comes to GPU Intel HD 4000)
- Media: Preferred 3D Performance
- Power: Max Performance
-
ENVY of HP dv7-7301eo Notebook PC: help please
Hi, I accidentally uninstalled Synaptics Touchpad Driver from the control panel because I tried to fix it because it was not answer all of a sudden. Please help, how can I redownload/reinstall Synaptics?
Hello:
You can obtain the driver from the support page of your laptop on the link below under the section keyboard drivers.
Maybe you are looking for
-
Old Airport Express lost after reset of the router, the connection cannot be seen/accessed
the train: -Mid 2009 Macbook Pro, OS Yosemite airport 6.3.5 10.10.5, utility -Existing wifi network via a former Ubiquiti AC wifi or router which gets internet radio antenna on the roof of the local ISP. -old (1st gen.) A1084 Airport Express used onl
-
Tecra S2 - resolution for external monitor on NVIDIA GeForce Go 6600
Hello! I'm new here... I have a Tecra S2 with Windows XP SP2 and a NVIDIA GeForce Go 6600 graphics card. Internal (laptop screen) resolution is 1024 x 768. His job very well. But I work with an external VGA monitor with function "DualView". It is a S
-
Satellite A200 - how to check the temperature of the processor fan?
Hi all I have a Satellite A200 that my teenagers use a little, or abuse a little! Recently, it would not start up. I suspect the fan and pulled out the fan cleaned and tested the fan on a PSU, worked out well. He put it back together, ran startup rep
-
DV7 - 6B 57 nr does not start from welcome screen
My labtop frozen so I tried to restart but it gets stuck, after taking my password on the Welcome screen. I tried to leave, he never another mode but with the same result. I've backed up lately, so I'd rather not restore. Don't know what else to do.
-
QML preview window is missing from the NDK Beta 2 (Linux)
Hey guys! Has encountered a problem. After NDK update to the latest version Beta 2 Preview QML window is no longer available for me. All was well with the previous version of NDK, so I guess that it isn't a problem with libglapi-mesa, libgl1-mesa-glx