Envy of HP dv7: lack of factory reset. Freeze and crash device not found Boot

Similar Questions

• HP Envy Ultrabook 4-1112TX: start the device not found

  Hi, the water had spilled on my laptop when it is turned off and disconnect with fees. After I try to dry it in the Sun after it dries I try to turn it on. But I saw this post about it not found 'Boot device. Please install an operating system on your hard drive. "HDD (3fo) F2 diagnostics system for more information, please visit:www.hp.com/go/techcenter/startup '. I just want to know if the laptop is really damaged or not my laptop is the hp envy ultrabook 4-1112TX

  peggyups

  Sorry to be the bearer of bad news, but any TIME you spill water on your laptop, it will do SOME damage ‑‑ the only question is, how much!

  You can work through the details in this thread to see if something helps you: you just spilled water or coffee on your laptop - what you need to do here is

  You should also try the steps in this thread to see if the hard drive has failed: test a hard drive in the BIOS. HP® customer support

  If nothing helps, your only recourse is to take the laptop to HP Service Center where they can disassemble, assess the damage and see what is involved in repairing it. Here is information on Service Centers: HP Notebook PC - use a repair center certified HP to repair a laptop | HP® customer support

  Good luck

  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the symbol of the thumbs-up to the left of the answer key to say thank you.
  If my message solved your problem please click on "Accept as Solution" - to help others to find the solution.
  ========================================================================

• Dv7 - 7333cl envy: Boot Device not found (3FO) after 8 of Windows Restalling of recovery disks

  Hello

  The hard drive on my dv7 desire - 7333cl just died after upgrading my windows 8.1 to 10. I bought a new SSD and I replaced the drive. I could not find the recovery discs, that I did when I got the PC, so I ordered new HP according to the recommendations of other threads with the understanding that they would be able to reinstall windows on the new drive.

  Given the shipping time would take a long time, until I tried to reinstall Windows 8.1 using the file .iso Windows 8.1 image official of Microsoft. It seemed to install properly, read the product automatically key and everything, but I could not get the machine to start, so I decided to wait for the HP recovery discs.

  Well I had the disc a few days ago and reinstalled the original image on the new drive. Problem is that when the computer reboots, I get error no matter what I try. The errors vary according to which of the steps I tried below, but I was never able to start Windows, except once when the Windows 8 BSOD loops and restarts automatically before I can even read.

  Here are the steps I've already tried:

  -Performed a hard reset (power adapter and battery removed, taking the power for 30 seconds button)

  -Run the diagnostic system HP based on the SSD (spent) and memory (spent)

  -Secure boot disabled (and re-enabled, cleared the keys, keys reloaded, etc.)

  -Enabled legacy support (and disabled)

  -Bios reset to original settings (F9) is then repeat above steps in various orders

  -Reinstalled two times more than original image

  At this point, I was wondering if the drive has not been formatted from the recovery disk and multiple files to start causing problems, so I started in Parted Magic with UBCD and reformatted the entire hard drive (0 s to write to disc) and again reinstalled original image. Still nothing so I told all the steps above in random orders to try to turn it on.

  If I start in the boot options, I can see the SSD, but it still won't start. Does anyone have more ideas for me to try? The fact that it passes all the tests and that it is running the Linux of Parted Magic environment suggests that everything works fine, but for some reason any Boot file does not load.

  Did I lose money on the HP recovery discs and he just bought my own Windows OEM license?

  I'm going crazy trying to figure this out. I am relatively experienced with the PC, but it's my first time work with the architecture of the UEFI Windows 8 so maybe there is something obvious that I'm missing?

  Thanks for any help.

  FINALLY SUCCESS!

  After a lot of frustration and several reboots, partitions, reinstall, and trips to Best Buy, that I care to remember I'm typing this from my stable work feel LIKE to the point Windows 8.1. Currently 10 Windows to download and install all updates, but everything seems to be stable.

  To make a long story short:

  -Be sure to carefully read the product manual

  I never would have guessed that this system would support only a 160 or 180 GB SSD. If I had of known that I would have probably never had any serious problems.

  -Instead of order recovery HP discs just to download the ISO of Windows 8

  I'm not the first person to have problems with these discs (search this forum for the many complaints), so unless desperately want the included HP tools and bloat, just to get a file from Microsoft (FREE!). There is no reason why it shouldn't work and I wish I would have went with my gut here and saved a bit of money.

  -Be persistent if you can't find the question

  I was told, many people, that the machine was bricked up. At that time, I was obsessed with the implementation because no one could tell me why it would not.

  Thanks for reading! And if you encounter a similar error, good luck.

• EliteBook 8570p can not find the reset disk and recovery plant not compatible hp, it's windows 7. Current mine is windows 7 Professional

  My computer specs

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/KB/docDisplay?docid=c03393945&AC.admitted=1414219581798.876444892.199480143

  OK, the corrupt laptop. With the help of windows 7 recovery disk to fix the computer, but it wont let me put mines microsoft windows 7 Professional.

  Rpet not compatible. My disks are friendly hp and compaq.

  so I couldn't use discs, then I went to try to make an adjustment, but Alano, default has no option.

  So, how can I go back to the factory settings or use my recovery disc for HP.

  Do not ask what the issues Im having just a question how to do a factory reset or recovery disk usage.

  Knowledge COMPUTING, medium.

  You are welcome.

  See you soon.

• ENVY of HP dv7 w / Win 8.1 freezes after the closing and re-opening of lid

  Computer: HP dv7 ENVY

  Processor: Intel Core i7-3820 QM 2.7 GHz

  OS: Windows 8.1

  Graphics Card & Driver: NVIDIA GeForce GT 650 M (worm 331.82)

  Since the passage of Win 8.0 to 8.1, my laptop does not respond to the new entry after the closing and reopening of the cover.  As an attempt to circumvent the problem, in Control Panel (Control Panel > hardware and sound > Power Options > System Settings) I selected 'doing nothing' for preferences "when I close the lid.  After having opened the lid, tab browser fail to loa, windows cannot be enabled/disabled and CTRL-ALT-DEL gives no answer (preventing access to even the Task Manager).  The computer must be restarted to continue in force.

  This solution seems to have worked, even if I do not know why the four actions that were "resolved" by the resolution of the problems of power would cause the issue.

  Thank you!

• ENVY of HP dv7-7265er - USB ports on the right side does not

  Test of the UEFI BIOS (after update F.10 F.29)

  Check USB port: FAILURE

  FAILURE ID: QWB664-6GX74K-QFPK0K-8D1W03

  PRODUCT ID: C6D03EA #ACB

  Hello

  Please find the link manual below the part number is USB card (includes cable) 681986-001 & check the page numbers 73 component replacement procedures.

  http://h10032.www1.HP.com/CTG/manual/c03591253.PDF

• HP Envy 15 t-as000: brand new HP Envy w / SSD: "Boot Device not found".

  Hello

  I have a brand new (less than 1 week) HP Envy 15 t-as000 w / a 256 GB SSD.  After the impeccable behavior for 1 week, the laptop can be started is no longer.  No boot device is detected.  If I try to run a diagnostic on the hard disk, the BIOS I was informed that it can not detect even a current hard drive (see image)

  I don't know what happened.  I'm very careful with my machines.  He has not been abandoned. It has not been dropped on, or taken any sort of somehow.  I just pressed the power button one day (yesterday) and I see this:

  

  Thanks for the tips. I followed your recommendations and sent the laptop to HP for replacement (I bought this unit directly to the output from the HP website).

  However, I am frustrated because after all taxes and transportation costs, I had to pay an additional amount of $10.  The total general of the replacement order was $739,79 against $730,90 for the original purchase.  Why am I penalized $ 10 ($8,89 to be exact) for a mistake that was not even my fault?

  Also, I had to pay $24,83 FedEx packaging to send the laptop back.  How was I supposed to know I should have brought the Moose with me to Seattle, WA in Ithaca, NY packaging because the SSD was going to fail in my college dorm?

  So in the end, my HP Envy $730,90 now goes to the identical replacement of cost unit $739,79 + packaging from FedEx $24,83 phone = $ 764,62.

  Bottom line: screw - up HP cost me $33,72!  Not the end of the world but still a ringing sound nice when you're not yet a career with a cushy salary of mickael elite.

• 810-160 Phoenix envy: envy phoenix 810-160: try to install Win10 after BSOD and format; drivers not found

  A few weeks ago, I got the BSOD and could only reformat without saving. After a data recovery service ravaged my hard drive, I bought a new drive. My recovery disk is not found (my guess is the woman she pitched in one of his fits of cleaning). Of course, I have to re - install the operating system and bought Win10 home.

  I plugged the USB and started the installation, but now get a message that no driver device were found. It is a pain, but it makes sense. Went to the website of HP drivers on your laptop and downloaded all the drivers, it produces for my specific model.

  Where I'm stuck:

  I have a pop up that says "Windows Setup" and "Select the driver to install", with a window not populated. I plugged my USB key containing the drivers and found him - USB key (H.) I chose this drive and the folder where I placed the drivers. Click OK and I get the message "no device driver has been found. Make sure that the installation media contains the correct drivers, and then click OK. »

  If I have the drivers provided by HP and they are not recognized, how do I proceed?

  Hello:

  Make sure that you dΘmarrez from a USB 2 port.

  You will not be able to install Windows from a port USB3.

  If you have the W10 installation media in a USB 2 port, windows can you are looking for the sata controller driver, so see if it works...

  Download the drivers from this link below (first or second listed file - 1 file listed (64-bit).

  https://Downloadcenter.Intel.com/download/25165/Intel-rapid-storage-technology-Intel-RST-RAID-driver

  Extract (copy) the files on a USB FlashDrive without all records.

  With the flash player and the installation media W10 plugged into the machine, boot from the W10 installation media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and I hope, W10 will install.

• HP Envy M4 1115dx: Qualcomm QCA Atheros Driver Installation error | Device not found wireless adapter

  I just replaced my old HD with a new SSHD Seagate. Everything is going well until I tried to connect to internet in wifi wireless mode with. I think it was a pilot error because I just do a blank Windows 8 install on my new SSHD (hybrid drive SSD). So I went to find the Driver for the WLAN Module.

  HP is automatically detected my laptop model number and gave me a list of drivers. I selected "Qualcomm Atheros QCA90000 series Wireless LAN Driver for Microsoft Windows" under the list of Driver Network in the menu dropdown.

  In the middle of the installation of this driver, I was arrested and met a titled error message, "802.11a/b/g/n Wireless adapter device not found". Just below this title was a big red circle with a white X sign. Besides, he said: "the device may not be present or could have been ejected unplugged from the system. Abortieng the installation, please insert the card and try again the Setup program. »

  Below is a screenshot of what I mean.

  

  Problem solved. I uninstalled all the drivers but the Ralink. Think I know what may have caused this.
  
  The recommended for WLAN driver was based on a misinterpretation on behalf of HP. HP auto detected my laptop as a 1150la instead of the 1115dx model.
  
  I'm not sure why HP thinks that my model is another, but it may have something to do with the SSHD and thermal fan replacement I did before this error WiFi.

• Audio no longer working showing Audio device not found on new HP ENVY 15 Notebook PC TS

  HP Audio CODEC high definition

  Windows 8 bit of b64

  Any audio just stopped working watch on mute, as most any audio device.

  Any chance to try before returning

  Problem has been resolved. By installing Windows 8.1 who come back a little and then installation of beats audio for Windows 8.1 solved the problem.

• Pavilion DV7 6c50eb: Boot Device not found

  Hi all

  I just change the HD of my laptop and after booting with the Win 7 DVD and install the operating system, I get this screen "Boot Device" not found.

  I am able to boot with the DVD, but I can't the normal HD boot.

  This is a new HD, it's all clean and working, I re-install after the first failure but still the same issue.

  Please let me know your thoughts

  Thank you very much

  FX

  I change the port on the motherboard, everythings works now... I believe that the port was not active and I have found no opportunity to change the option in the bios... duration of the other port have solved the problem.

  See you soon

• Re: Factory Reset on AT200 but always ICS

  Hi all

  I bought an AT200 a few months ago and updated to ICS a few weeks ago. I did a factory reset today and after that ICS is always running on my tablet.

  I thought after resetting my device it will be Android 2.3 race as he did after that I bought it, or am I wrong?

  Hello

  Resetting the data does not change the system software that you are running.
  He re - installs all simply what you have on your device "fresh."
  So, if you had ICS and a data factory reset you would just again a new installation of ICS.

• RNDU2000 problem after factory reset

  Hi all

  A friend of mine gave me his RNDU2000.

  I tried a factory reset. RAIDar find to restart and gave me the choice. I chose XRAID2.

  After several minutes (test drives, intallatation...) device reboot and stuck with these configuration LED: Power On, Bill, 1, 2 flashing.

  RAIDar is more and I had no access to admin frontview.

  I changed hard drives, are doing a factory reset again and got the same results...

  Ping device response.

  Any idea?

  The firmware on the flash has been corrupted, so I put the latest firmware on the flash.

• ReadyNAS Pro 2 - Can't access after the factory reset/install

  Hey all,.

  Have a Pro 2, which responds more recently. I can factory reset it and start the installation process in RAIDar. But when he sets up the discs that it disappears in RAIDar and I can't access the web interface (responds to the pings, however).

  Problem of firmware or RAM?

  You came across a problem that we see in some cases, when do a factory reset. It should now be fixed.

• HP Pavilion p7-1012: factory reset

  I try to do a factory reset on my HP pavilion p7-1012 I bought by Aaron, when I go to the system recovery I get the message "your computer does not have a recovery partition. So I tried to burn the recovery disk and it says "not found recovery Partition. How can I do to reset my pc, or I have to order the software drivers and media? Any help would be appreciated...

  Uneekbrother, welcome to the forum.

  It seems that the recovery partition has been removed from the car.  The System Recovery / backup / restore section for the computer should help you make this dertermination.  Here is a guide to help you order the recovery of system for computer media, if you do not find the partition.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.