EPrint Restart

Similar Questions

• 5524 photoSmart HP ePrint & misfortunes AirPrint

  Hello

  I recently bought a PhotoSmart 5524 printer to go with a new iPad AirPrint will however not see the printer and HP ePrint will only print the pictures otherwise I get the "Oops, something went wrong, please try again" error message.

  HP printer control panel does not see the printer.

  If I have an e-mail the documents to the printer, everything works fine I just can't print directly to it.

  The printer is connected to a router D-Link DSL-3780 with IGMP active.

  I restarted the router, a printer and the iPad many times without success and that the printer works the latest firmware

  Please help because it makes me crazy.

  Thank you.

  Thank you.

  The only reference I can find for this router will show TalkTalk, so I guess it's done specially for them.  Anyuway, according to the forum of TalkTalk, there's an updated firmware available for your fix.  Usually, when firmware updates are "pushed" to the routers, all you need to do is power of the router and turn it back on so he can install it.  There may also be a way to have control of router for updates.  I don't know how it works in your case, so I would contact them for assistance.

  Here is a link to the thread of TalkTalk: http://community.talktalk.co.uk/t5/Unlimited-Broadband/DSL-3780-and-AirPrint-HP-Deskjet-3050A-Wireless-Printer/m-p/947696

• LasrerJet P2015n: Low error when printing with ePrint to a LaserJet P2015n on iOS supplies

  "Hi, I'm using the HP LaserJet P2015n, which works very well, however try to print using ePrint on iOS 8.3 seems to cause problems. If the application finds the printer on the network, and try to print, it invites a mistake "we have detected you are low on supplies error" obviously is not the case, because it is more than 50% of the full and prints very well using the desktop computer. The printer error LED keeps blinking and won't not even respond to a request for printing office. It must be restarted to work again.

  Tried all kinds of reboot and reset. I also tried to find a solution with no luck, there is no updated firmware for this printer can be found as well.

  Any help will be very appreciated!

  @hussain316

  Thank you, based on the information you provided... the p2015 is not taken care of with ePrint. That's why whenever you send a print job for printing, the printer responds with error messages and you have to pick up then power cycle the computers can be printed successfully on it.

  If you want to start mobile printing, then you will need to upgrade to a new printer with function ePrint. Depending on your price range, the new m277 is a nice little printer and has this ability.

  Sorry

• ePrint does not-Deskjet 3070

  I'm having a lot of trouble to do my printer doesn't work on the side things eprint.

  The IP address is the same on my router/printer/HP eprint website, so I don't know what's wrong.

  My printer is back with "the printer could not connect to the internet. Check the Internet connection.

  The wireless aspect works very well.

  Ubuntu 11.10/HP Deskjet 3070/Virgin Supehub

  Kubuntu 14.04LTS / Photosmart D5460 / 3070 Deskjet / Officejet 4630 / LibreOffice Version: 4.2.7.2 Build ID: 420 m 0 (Build:2) / Netgear WNR2200 / Virgin Media SuperHub 2

  Hi pooky2483,
  
  (On your printer) Reconnect the printer to the network by running the Wireless Setup Wizard and try to restart the web services. If this is not enough, you may need to change some settings of DNS in the EWS (built-in web server) printers
  * To do this, put the IP address in a browser window on your PC.
  
  This should start the integrated Web server. In SAP, select the network on the network tab, select 'network '.
  
  Then select "network address" (IP). Do not change the IP configuration at the top. Go down under "DNS address configuration"and select 'Manual DNS server'. " Under manual DNS server, enter (an 8 in each box on the first line) 8.8.8.8 and 8.8.4.4 on the second line. Press the button 'Apply' at the bottom.
  
  Now try to connect to Web Services again.

• ePrint

  Have an Officejet Pro 8600 more all-in-one.  When I got it that I signed ePrint but now do not remember my email ID or password or the printer in the user.  The standard instructions to use the priner screen will not work.  How can I get the printer email now or at least my username to connect?  I want to connect a Droid M and a Droid 3

  JSF1012

  @JSF1012 - I would like to start with addresses the Ajax forbidden error you get. To come out that error can be user another browser, restart the computer and then go back on the site. Or they can erase their history, cookies and cache on this browser is that they do not want to use another.
  
  After one is able to access the ePrint centre, they should see a forgotten password located under the fields email and password that you can click on and fill their personal email they used to set up the account. It will then send an email with a link to the site where they can reset their password. After that this password is changed, it will keep you in the site where you can look under the status of the printer and see addresses of the printer listed.

• HP Photosmart 5520 cannot connect to ePrint

  I tried the steps that are available on the FAQ page, and they do not appear to have solved the problem. In my view, that it could have a connection at some point I received the claim code printer, but since I entered this ePrint says the printer is offline.

  Help?

  It appears, just affect Google's DNS the DNS and then 'restart' the printer solved the problem...

• HP LaserJet P1102w: I do not know my email address for HP EPrint

  Hello

  I have a HP Google Chromebook 14 and I try to my HP LaserJet P1102w EPrint.  I did not initially set up this printer and I need email EPrint to print.  How to find this e-mail address?

  Such an IP address is wrong and will not allow access to the content, the printer or the printer connected to the network.

  Try turning off the printer, make sure it is not located too far away from your router has HOWEVER also ensure there is no less than 1.5 to 2 meters between the printer and the router.

  Turn off the printer, once it is off restart your router by unplugging its power for 10-15 seconds.

  Once you plug in the back of the router allow it 1 to 2 minutes until all lights turns on and you are able to access internet from your chromebook.

  Only, then turn on the printer and leave it a few moments to connect until the blue light turns blue.

  Then print another check for the difference.

  If you see all these addess that starts with 169.254 once again, please specify your model of router, also make it clear if you have any other computer available (this is in order to understand our options if necessary to reconfigure the connection of the printer wireless as such can be done directly from Chrome OS)

  Please let me know the results,

  Shlomi

• HP ePrint only works for the main e-mail address, does NOT work for the other email address

  I have several e-mail addresses configured in the list of authorized sender, but it seems to work only for e-mail messages sent from the e-mail address (main) of the owner. I get a confirmation email when I use other e-mail addresses, saying that "labor received ePrint" but no dice.

  What gives?

  Thank you

  P

  Hi panchuparayil,

  Thank you for the update.

  Please start with the update of the printer by getting the latest Firmware and updates given that a firmware update available.  After completing the update of the firmware, please restart the printer.  Once the printer has been restarted, please try to send another email to the address of electronic mail of the ePrint printer.

• ePrint - error not connected

  My printer keeps appearing as not connected to the ePrintCenter and do not print.  When the printer is restarted, it seems clear, print some documents, and then later, just go to the offline state.  Any ideas?

  Those of you who have had difficulties, please try a connectivity ePrint, Print Apps and ePrintCenter even now... the maintenance ePrintCenter message was erased and I believe that you can find all of the improved results.

  If you have difficulties, you can try the actions below in order (for example, try #1 and if you continue to have a difficultles, try #2, etc.):

  1. turn off Wifi then on again

  2. power cycle your printer

  3. Remove and then reactivate web services (this will result in your printer, get a new email address)

  Thanks for your comments.

• ePrint stopped working on iPad - new

  I'm frustruated - ePrint services seems to stop working after a few weeks of success, and now I can't restart.

  I have a 4th generation iPad.  The user of the iPad has a HPConnected account with a printer to this topic.  I deleted and added the printer on this account, generate a new code for it.

  When I send an email to the printer, I did not receive the email receipt-it's as if the field does not yet.  Needless to say (but I'll say it anyway), my e-mail does not print.

  Please notify.

  Thank you

  Dan

  Hi Dan,.

  I pulled the following the link post below and maybe it's a bit to relavent to your question.

  It appears in the message that the e-mail message is blocked at the initial entry of HP servers, separating the known areas (such as gmail.com, yahoo.com, etc.) of those does not recognize (like rr.com, cingular.att.com). I have a strong feeling that 'tesco.net' is one of these that it is filtering (but this is speculation because I do not have access to algorithms implemented for the servers).

  Try to send the email from a gmail or yahoo.com email account if you have access to one.  Also, please change your previous posts to the black of any reference to your personal e-mail address where you receive e-mails unsolicited through this public forum.

  http://h30434.www3.HP.com/T5/eprint-print-apps-mobile-printing-and-ePrintCenter/eprint-with-Photosmart-B110a/m-p/776239#M6391

• HP4630: Select printer for ePrint on iPad

  My ePrint has stopped working. She now shows "no printer found airprint." How to recognize my printer?

  Hello

  Sorry to hear that you are experiencing printing problems.

  Try to restart your apple device - it's a simple solution that sometimes allows to restore the connection to the printer.

  Other things to check would be that there has been no recent changes to the wifi password.

• EPrint mail - how to transfer the e-mail address to the new printer

  Hi, I just want to know if it is possible to use the old mail to a new printer eprint?

  My problem: install my new printer-> installed eprint

  then I had some problem and decide to close and restard eprint

  result: my old address eprint (easy to remember) is busy, I get a new email, my printer is the same, just I restarted the service :/

  You could send an email to it is removed but personalized email itself will remain during this period of time until what it is deleted / recycled from the server

• Photosmart 5510 - wifi ok but not ok ePrint

  Hello

  I got a new 5510 e - all - in - one

  It is connected to my modem wifi and my 2 laptops are connected too.

  I can print from my two laptops to the printer, scan is working, etc..

  However, I can't implement the ePrint.

  When I thouch the screen of the printer to install the ePrint, I got:

  "Accept the terms of use and activate Web Services? See the printing Guide.

  If I click 'yes '. Then I got:

  "Periodic updates are necessary. Accept future updates".

  If I click on 'Yes' (even I tried 'no', but same result). Then I got an error message:

  "Download failed. Touch Retry to restart the download or Ok to exit".

  Can someone tell me what is the problem?

  Is my modem wifi that isn't Anick printer go online, but still allows him to converse with both my laptop?

  Thanks for your help and advice on how to procceed that I'm not good at all this electronic stuff...

  See you soon,.

  Roman

  I put the printer in the shop (Office Depot).

  they sent to central technical HP and so during 29 days! While she was a new printer...

  Anyway, now it works, I'm sure there's a software/driver missing in his yard...

• HP Deskjet Ink Advantage 4645: ePrint does not work

  I bought HP Deskjet Ink Advantage 4645. Start ePrint feature is impossible.

  I do the following:

  (1) press (ePrint) buttons at the front.

  ((2) I get a failure... as ' proxy or Internet to check connection settings).

  (3) given that I see the work perfect Internet connection, but on the settings, I found that there is no value of proxy and the port is 0.

  I live in Greece (maybe the functionality is supported by my country?)

  Thank you

  Hello

  I hope that you were trying to save the printer directly from the front of the printers, this is an additional method to enable the web service.

  Once you connect your printer with the cable network, let the printer get the IP address.

  Now plug your laptop or your PC in the same network.

  Type the IP address of your printer in the address bar of the browser and hit enter.

  Now, you will see the embedded Web Services Page.

  Access the Web Service tab and click Activate or click the eprint on the façade of the printers and proceed with the registration process.

  Now, the printer must be turned on and print a sheet with the claim code.

  NOTE: If you don't see the Embedded web services page, try unplugging all other devices out of the laptop and printer, then restart the wifi, the printer should pick up the IP address and connect to the internet.

  Your Internet service provider must be able to provide the settings of proxy for your network if its still does not.

  Kind regards

  Oliver

• EPrint to CP 1525 works with Ipad, but not iPhone

  I have installed on my CP 1525 eprint and it works fine on my WIFI network with my Ipad on direct printing from any application.  On my Iphone, I can send an email to the printer to print, but I can't print directly from an application.  It shows that the printer is available and gives me an indication he was sent and printed correctly, but the work not me never "to the printer.

  Any ideas?

  Hey peoriaps!

  I assume you're talking about Airprint where you can print directly from applications apple Safari right? If this is the case, then it should work for each unit. Make sure that your iPhone is a 3GS or 4, and his version of the iOS is at least 4.2. If this is the case, then try to restart your iPhone. Hold the lock button until you see a red to power off slider, wait 10 seconds, and then press and hold the lock button until you see the apple icon on the phone.

  Let me know if it helps!