ePrint - error not connected

Similar Questions

• ePrint - printer not connected?

  I just plugged my new series of e-all-in-one HP ENVY 110 - D411. I signed up for an e-mail address for my printer. I sent an email to the address of the printer. It comes as pending on the list of the work on the ePrintCenter. I also went in the printer settings to check that ePrint was turned on. This is the case. EPrintCenter! said it is "not connected". Any idea where I should start troubleshooting?

  Hello

  The first thing I would try is turning the printer off and on again.

  The second thing I want to do is to follow step 6 in this document to set a static IP address: http://support.hp.com/us-en/document/c02817031
  When it askes for the DNS information, enter in Google DNS. Preferred DNS = DNS Alt = 8.8.4.4 8.8.8.8

  If it does not help if you could provide me the following information, it would help me to first, which is your ISP (Internet Service Provider, as Comcast, AT & T, Verizon, etc.)? Second, who is the manufacturer of your router? Finally, what is the version of the model number and the firmware on the router?

• HP Laser Jet professional P1102w - error not connected

  Hoping someone out there can give me some advice!

  I had the same printer for years and it has worked reliably until yesterday, when I suddenly started getting a "not connected" and "Printer offline" error messages when you try to print. I wonder if my maid accidentally pressed something? I tried all the usual unplug, turn on/off the printer and computer, and connections.

  Printer is connected to the last Apple Time Capsule and goes up to Mac (current 10.8.4) via my network. Worked fine until yesterday. When I print a free text through the printer, the Network Information section reads "status: not connected. Everything else with Time Capsule works fine: I'm connected to the Internet through Time Capsule, managed to go up to Time Capsule, etc..

  Any ideas on how to fix? Thank you!

  Hello

  Try it reconnect to your network using WPS listed for Time Capsule below:

  https://discussions.Apple.com/message/21555447#21555447

  Once the Airport utility, waiting for a Wi - Fi printer on the printer control panel, press the Wireless button ( ).

  The wireless light starts to blink.

  Wait up to two minutes for the printer establishes a connection with the airport database.

  Shlomi

• I am connected but you get the error: "not connected - connections are available.

  I am able to connect to internet with my HP dm1-3025 x netbook (running Windows 7 Home Edition Premium, SSD 240 GB, 6 GB RAM) but will have the following problems.

  • It takes a long time to connect to a wireless network
  • "I get an error message that says: not connected - connections are available.
  • The network bars appear as grey with an orange asterisk on top
  • The Assistant to "Solve problems" is not able to find problems
  • It takes a lot of time to open the "network and sharing Center." Once opened, it says 'Server execution failed '.
  • Windows Media Player and iTunes take a long time to load (approximately 2 minutes or more for each)

  It started about two or three months ago and I lived with her. I went through internet and have not been able to find a solution to this problem. Any ideas or solution would be much appreciated.

  Hello

  I suggest that you want to run system restore to the date it was working fine.

  System restore
  http://Windows.Microsoft.com/en-in/Windows7/products/features/system-restore

  Once you do the system restore, then I suggest you to download and install the updates from the Download Center. http://www.Microsoft.com/en-in/download/default.aspx

• Error: not connected during video chat in Facebook.

  Original title: can someone please help me?

  I am connected to facebook and try to make a video call but when I try, it says im not connected, but I am connected. Help, please

  Hello

  1. what browser you use to access Facebook?

  2. using any application that allows you to use the video call feature?

  3. the question facing you to access all the other sites?

  4. What is the full error message?

  Please provide more information on the issue to help you best.

  If the question is limited to video chat in Facebook, I suggest you port your application to Facebook support.

  http://www.Facebook.com/help/

• iOS 9.3 has downloaded but will not be installed - false says error not connected to the internet

  IOs 9.3 has downloaded to my iPad Air but when I try to install it I get an error message saying verification failed because I'm no longer connected to the Internet - but I am? Someone else? Any ideas?

  Apple pulled iOS 9.3 for your device, so you will have to wait for that Apple is launching a fixed version and you can update your device.

• printer pro 8600 - 2 trays stops printing all nite at 19:00 error not connected printer States

  My pro HP8600 printer has malfunctioned since new right out of the box. HP has been unable to provide the solution. Every evening at 19:00 the printer stop printing and won't return until I restart my PC/laptop. I have a HP 4100 on USB printer that works very well. The 8600 will be fax and copy, but won't scan or print emails or documents. Error state the printer will automatically disengage when it is not. I restarted the printer, but it does not help. All the tests I did on the network IP address of departure etc. PC is running XP

  Okay, I think it's a XP bug that exposes HP software. See the following link for more information:

  http://support.HP.com/us-en/document/c03149924

  Also, even though it is not stated in the article, putting to Vista or 7 would also "resolve" the issue.

• Unable to connect to the net work. Saying error 'not connected connection .no available' in my network icon

  Hi all

  I restarted my PC once with the update finished. But this time on words - Ethernet connection was failed No. my PC. I also checked the connectivity cable and the State in the network connection window. It detects in but not possible to ping with my firewall device and other network device .not get internet also.

  Type the command ipconfig in command prompt, it is show only windows IP configuration

  More about things I did to solve the problem

  • Uninstalled from the PC and once restarted network driver, but automatically install new driver with the same situation
  • Tried with another network driver
  • Checked with another connection of cable network
  • Not updated the driver (previously, I also said do not have Internet access so how!

  I share my system and the OS details below

  OS: windows 7 Professional 64-bit

  System: HP Compaq dx 7380MT

  Connection: Wired

  Please someone share me your idea to solve this problem

  Hi Renon,

  I imagine the inconvenience that you are experiencing. Your efforts to solve this problem is highly appreciated.

  Exactly how you did update the network adapter driver?

  You can follow the steps in these articles the Microsoft KB and check if this may help:

  Why can't connect me to a network?

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-to-network#1TC=Windows-7

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-7

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• ePrint does not connect

  I did everything I know, and then some have updated all the software. I have internet and a good connection. The printer prints wireless but won't connect to the computer (webservices custom engage/connect...so ever, I just can't get a code of request.) Very frustrated... stayed in it for a while now. Can anyone help

  I was referring to the router. You shouldn't have any problems with the router powered off. Sometimes routers must restarted to restore adequate connectivity for some devices.

• Could not connect to command line SQL Oracle XE

  Hello
  I use Oracle Xe on windows XP... I can connect to SQLPLUS using the windows shell with each of them to the account user and password as
  --------------------------------------------------------------------------------------------------------------
  Microsoft Windows XP [Version 5.1.2600]
  Copyright (C) 1985-2001 Microsoft Corp.
  
  H:\ > SQLPLUS MAYA/MARCO
  
  SQL * more: Release 10.2.0.1.0 - Production Thu Jun 30 17:28:12 2011
  Copyright (c) 1982, 2005, Oracle. All rights reserved.
  
  Connected to:
  Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
  SQL >_
  ---------------------------------------------------------------------------------------------------------------
  but when I use the command line SQL Oracle to start-> all programs/Oracle Database 10 g Express Edition / * execute SQL Command Line * it brings the command SQL line with a quick line of SQL, but it connects to the database.
  
  ---------------------------------------------------------------------------------------------------------------
  SQL * more: Release 10.2.0.1.0 - Production Thu Jun 30 17:36:12 2011
  Copyright (c) 1982, 2005, Oracle. All rights reserved.
  
  SQL > Select * from cat.
  SP2-0640: not connected
  SQL >
  ----------------------------------------------------------------------------------------------------------------
  and I met with the error "not connected". I'm sure that the database has already started successfully.
  Can you please let me know I'm doing wrong or what is problem with Oracle SQL Command Line?
  
  Thank you

  Hello

  What is

  connect MAYA/MARCO

  You can issue a query later?

  Kind regards

• OfficeJet6500A more - ePrint Setup error - this printer could not connect to the server

  My 6500 a is connected to the internet and I am able to print wireless.

  When you try to set up ePrint, I go through the following menu path: installing, configuring Web services, the printer email address.

  I get the message error "this printer could not connect to the server.

  I have read and tried the others 'solutions' on the plate that involved turning market eprint, crossing out-lit power cycles, turning wireless on and outside, turning on the printer and wait 5 minutes, restoration of factory settings...   Nothing works.

  Any ideas?

  From one day to the next it printed the ePrint address, so I guess that the problem was with the HP sever.

• HP8600 does not connect to the ePrint Server

  HP8600 does not connect to the ePrint server at all. I double checked all the settings and I can print to it from my applications when you are connected to the same network, but try to access the server of ePrint from the screen of the printer or the web interface cannot establish a connection.

  The printer is connected via a wireless network and can be printed from any device connected to our network.

  Everything indicates that there should be good. But can't seem to make bad connection ePrint. No error message not developed.

  The printer is on a network of b/g/n 2.4 GHz connected to a Netgear N600 DUal Band (WNDR3700 model).

  Version of the firmware of the printer is CLP1CN1232AR

  Any ideas? It does not appear to be blocked by a firewall, so really lost here.

  Hello

  Try to define an alternative DNS and check if that can help you:

  1. Tap the wireless on the top of the screen of the printer and look for the IP address is.
  2. Navigate to throguh IP of the printer, the web browser on your PC.
  3. Click the network tab.
  4. Under, click IPv4 wireless.
  5. Under the DNS Configuration, select manual.
  6. Set the address preferably as 8.8.8.8
  7. Set the e-mail address alternative as 8.8.4.4
  8. Click on apply to confirm the change.

  Now, turn the printer off and turn it back on and check for the difference.

  Shlomi

• Want 4500: Connection error! The printer could not connect to the server

  Connection error! The printer could not connect to the server!

  Cannot set up eprint or update the driver. Ever been on the forums and do not understand what to do!

  I am successfully connected to my router and can print from my pc and my ipad with airprint.

  PC "will not find"the printer either for purposes of updating

  What I need to change the DNS. If so, I don't know what it is or how to do it!

  I went to the ip address but was unable to click on "wireless (802.11)", as recommended by a last response forum, as the next low 'status '.

  Can anyone help?

  Very frustrated customer :-(

  Hi @roopuk,

  Thanks for getting back to me.

  Sometimes the manual DNS 8.8.8.8 / 8.8.4.4 won't work in some configurations of network users.  Try the same steps as described above, but this time use the following parameters:

  Manual preferred DNS Server: 209.244.0.3
  Auxiliary manual DNS server: 209.244.0.4

  If you encounter the error, as before, we take our proverbial gloves off to try a more intensive troubleshooting.

  What is happening, it is that your router allows your printer connection that to enable wireless, but not a secondary connection to Web services.  In order to get these devices to 'shake hands' a second time, you may need to enable DMZ mode on your network through the router's built-in Web server.  HP does usually not this configuration for its customers as errors can cause serious network problems, but I can certainly post the info you need on your router or the ISP of the staff support company so that they could help you directly.

  Here is the information that you need for your provider service to open ports on your router/modem...

  -Multicast must be enabled
  -Hello enabled for AirPrint (relevant for iOS and Mac OS users)
  -Mac filtering should be disabled
  -Also, make sure that your router's firmware to date if
  necessary
  - The dmz on the router mode and turn it on to the printers IP address: _

  Ports to open are: Eprint and Apps

  Incoming Ports.

  UDP
  80
  443
  ------------------
  Outbound ports

  TCP
  5222
  5223
  -------------------
  Once they are open, you should have no problems connecting to services web eprint on your device.

  I would like to know how it works for you.

  Kind regards

• B210A Photosmart - server connection error and does not connect to the wireless router

  I have problems setting up and to connect my router to my new printer b210A. Everything goes well with the initial configuration, and when asked to connect to the network at the start, it works. Then he said that the printer requires updates, downloads of updates, reboots, asks me if I want to activate eprint and as soon as I said 'Ok', I get a "the server connection error" and it is then no longer connected to the network. When I get out of the "server connection error" screen and attempt to reconnect to the network, he says 'Success', prints a Test report wireless, but never connects.

  It's the 2nd printer that I have had in a week, given that the person of HP online chatting told me my first printer had problems of "hardware", after experiencing the same problems and I'll be recommended. So - I did, and now I'm running into the same issues. The number of 800 was NO HELP - after recommended I have unplug and reconnect, then telling me there were server errors (when the printer was not connected to the network).

  We will set an IP address of the printer with a special focus on DNS domains:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). You can find the beach DHCP from the router using its internal settings page or in its manual. Use the CD that came with your router or type the IP address of the router (ends para.1) in a browser.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway

  -For the first DNS 8.8.8.8 and 8.8.4.4 for the second use.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• Difficulty 'Not connected' Error Messages When you try to access Web Services

  If you are running on an error message on your printer stating that it is "not connected" when you try to access ePrint or your applications, but you know that it is connected to the internet, it probably just means that the printer does not connect to the server properly.

  Here's the first set of markets, I will try, as they seem to solve this problem deliver half the time.

  • The first thing I'd like to try in this situation is a reboot of the system.
  • First, unplug the power cord at the back of your router.
  • Then unplug the power either to the back of the printer or the wall without it first turn.
  • Wait about 30 seconds and reconnect the power cord to your router.
  • Wait about another 30 seconds and reconnect the printer. It should start back up automatically, but if it is not moving forward and press the power button.
  • Once everything is back running, try to access ePrint or your applications.

  If these steps do not work for you, the next thing would be to establish a static IP & DNS for the printer. Before doing this, you want to print a Network Setup page. It varies from a model, but usually found under settings wireless or in reports in the Setup menu. After that you have this page, follow these steps.

  Before we begin, we need a network with your current connection settings configuration page. To do this, press the button on the front of your printer wireless and press 'Print Info' or 'print the State. " This example displays on a page of configuration of the network, which provides information on what we have to finish the next few steps.

  • After that you have, we will need to access the built-in Web server (EWS) printers. You can do this by entering the IP address of printers (from the Network Setup page) browser press and the address bar type.
  • Once there, press the 'Network' tab at the top of the page. From there, you'll want to click on the button "IPv4", on the f-side of the page. It will be there for wireless and wired, so make sure you click the one for you, but you are connected. If you do not see "IPv4", you should see 'Networking', press and press "Network Address (IP).
  • Then, you click the small round button next to "Manual"IP address", and then fill in the IP address, subnet mask and default gateway using the information available on the network configuration page.
  • For the primary or the preferred DNS server, you will want to enter 8.8.8.8.
  • For secondary school or another DNS server, you will want to write 8.8.4.4.
  • Click on apply and when the message appears saying that the changes have been applied, press 'OK '.
  • Press the power button on your printer, wait that it completely power off and press it again to power it on.
  • After doing this, go ahead and try to activate ePrint again.

  These measures should fix this for you. If they don't, then something else can cause this problem for you. Reply in this thread if these steps do not work, and I'll see if I can help figure you out what might be causing the problem.