Equium A200-1v0 powering on after it has been closed

Similar Questions

• Equium A200-1V0 - freezes after plug power supply AC?

  Hi all

  I'm trying to find the solution of the problem:

  My laptop Equium A200 1V0 freezes as soon as I plug the power running. I tried the new battery and new AC adapter after reading some solutions of the internet but so far without success. It works fine without the plug'in ac, but as soon as I join to food it freezes and I have to force the shutdown of the machine which is not good.

  I would be very grateful if someone can give me please the solution in detail the problem mentioned above and also let me know the cause of this disorder as well?

  Thanks for reading this thread and for your efforts.

  Kind regards

  pat3l

  Hey,.

  You use an AC/DC to original Toshiba adapter? In my view the problem must be related to AC/DC adapter or the motherboard itself

  Important is that you use Toshiba parts only to test with an AC/DC to original Toshiba adapter. If it doesn't work, it seems that the motherboard is faulty. These serious physical issues can only be set to an authorized service then you should contact the guy and ask for help. ;)

• Equium A200-1V0 - service the user profile Service has no connection

  Hey, wonder if anyone can help me.

  My laptop is not letting me log in the profiles of each user, a message keeps coming up saying 'the user profile Service service has no connection. User profile cannot be loaded. »

  I can fix anyone know? A got a Toshiba Equium A200-1V0 if that helps.

  See you soon.

  See this MS knowledge base article:

  + Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. User profile cannot be loaded.
  http://support.Microsoft.com/kb/947215

  This seems to be a known issue of Windows and you can correct that running the Microsoft Fix this problem Microsoft Fix it 50446

  Welcome them

• Equium A200-1V0 does not start after recovery

  Hi all

  I have Toshiba Equium A200-1V0.

  I wanted to restore Vista back to the factory settings and used the recovery disc - everything seems to go well, selected 'no' on the disc Add on to the end, as I don't seem to have one. When you restart the laptop, it goes beyond the post screen, then darkness... nothing happens at all.

  Now, I thought that maybe there was a hardware problem, so I tested it using a copy of Windows XP I - installs fine, no problem. I noticed that the recovery partition "Winre" was 1.5 GB in size and 1.37 GB free. I guess that's complete, it contains a file called "boot.sdi" and the folder called 'sources' in the 'sources' folder there is a file called "boot.wim" and that's, I don't know if this is right.

  Whatever it is, I can't get the thing to work with the recovery disk (Vista Home Premium) and there seems to be no hardware issues that XP is fine.

  Any ideas would be greatly appreciated.

  Thank you

  Danny

  Try to remove all partitions on the HARD disk and re-run recovery.

  You can use FDISK on a BACK (www.bootdisk.com) boot disk to delete partitions non-dos.

• Equium A200 - 1V0 DVD Player error impossible of video output to an external device

  Hello
  I use my Equium A200 1V0 laptop with Vista Home Premium, and whenever I try to watch a DVD using the preinstalled Toshiba DVD Player software, I get the following error...

  "Unable to video output to an external device. Please spend your
  display the buttons on the unit by pressing the Fn + F5 after the end of the application. »

  I do not have an external monitor, and have never had a. (By pressing the Fn + F5 buttons does not work, because...) I have not attached external devices!)
  The software used to work properly, and I have not changed the settings at all.

  I have now tried to reinstall with the latest download from Toshiba, but the problem remains.

  Any thoughts would be accepted with gratitude.

  Bufster

  Hello

  I found a boyfriend of the solution.
  How?

  I searched simply here in the forum and found this thread!
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=114726

  Jack Black has posted a link to a useful Toshiba doc that says that this error is related to the Realteck sound driver.

  Update the audio driver and you must solve this problem!

• Equium A200-1V0 using XP - recent conversion issues.

  * Hi, *.

  * I recently inherited my laptop the girls, he had vista installed on it. I'm not a big fan so decided to install xp. I found a great guide on the forum, see below, (the topic is now locked) *.

  The original guide:

  + How to install XP Home on the following Vista laptop. 05/01/08 +.
  + PSAF5E + Toshiba Equium A200-1V0

  + Introduction
  + Here are the measures taken by us to remove our Toshiba laptop Vista and replace it with XP Home. There may be inconsistencies in our methods and we cannot have all the correct drivers installed, but everything seems to work OK for us. +
  + Our laptop now runs much faster, opens and closes more quickly and is more stable. +

  + This isn't a 5 minute operation. It should not be attempted by anyone with only a knowledge of passage of computers because it is very easy to screw things. The shop you bought your PC against them will load a lot to fix things and they will probably insist reinstall Vista! +
  + Be prepared that this would also probably negate your warranty. +

  + Luckily, I have a 2nd PC under XP, which allows me to access the web. This is very useful because it means that when your Vista machine is "broken" you can always find help and download the driver files. I also used my 2nd PC to create the XP installation updated the CD discussed later. +
  + You must have access to the web via a PC or another to get the necessary drivers. +

  + Method +.
  + First, even if you have Vista on your laptop, download and run a program of interrogation as "Belarc advisor" that lists all the drivers and software installed on your laptop. Print it out for future reference. It will be useful later when searching on the web for all drivers that may require updating. +
  + Now, make sure that you noted on all the necessary settings for your Internet connection. +
  + Also, back up the files that you may have placed on the hard drive you will lose the lot, including emails and the address books and web bookmarks etc. +

  + Unfortunately, the Toshiba disk that comes with this laptop does not appear to have all the required drivers with it. Instead, I think it relies on Vista keeping copy on your hard drive. It's not very bright that when the disk fails, you have lost everything! +
  + This means to go on the web and the search of all the required drivers run the XP successfully. +
  + Some we have found, for example the wireless network adapter, however this was not a problem because once we had installed XP and connected to the Internet through an Ethernet cable to our router, we were able to run 'Update Driver' for each missing item. +
  + Go to "Device Manager" via "Control Panel" then "System" and then "hardware". Then look for any yellow question mark for all the problems. Right-click and run 'Update Driver' for the Hardware Update Wizard and allow the PC to search the web "this time only. +
  + The ones we made in this way were: wireless adapter, Audio adapter. +

  + Unfortunately an original CD of XP SP2 does not contain the required drivers for this laptop. Therefore, when you start the CD it will be, after a few minutes of installation of files, say you have a hardware problem, there is no hard drive. +
  + To remedy this, you will need to download the right drivers Intel ICH8M SATA AHCI Controller. I could not find on the website of Intel, but on the contrary searched on Google for him. and he got to: http://www.alphadownloads.com/downloads/download-hp-intel-sata-ahci-controller-driver-ver--d-3064.html+

  + The other necessary drivers that we found on the web were: +.

  + Intel chipset device software installer +.
  Web page +.
  + http://downloadcenter.intel.com/Detail_Desc.aspx?agr=N&ProductID=816&DwnldID=14528 & strOSs = 45 & OSFullName = Windows * XP Home Edition & lang = eng +.

  + Or if this link does not try this: +.

  + http://support.intel.com/support/chipsets/inf/sb/CS-021273.htm+

  + Select 'Download Intel chipset software installation utility' on the left side, and then select your operating system "XP Home +.
  + Select "INF Update Utility - primarily for Intel 3, 900 chipset series ' +.
  + and download it. +

  + Driver Intel graphics: Mobile Intel (r) 965 Express Chipset +.
  Web page +.
  + http://downloadcenter.intel.com/Detail_Desc.aspx?agr=N&ProductID=2800&DwnldID=1438 8 & strOSs = 45 & OSFullName = Windows * % 20XP % 20Home % 20Edit ion & lang = eng +.

  + Or if this link does not try this: +.
  + http://support.intel.com/support/graphics/intelgm965/+

  + Now, select "software & drivers" on the left side and select your operating system "XP Home +.
  + You will be presented with a list of files. +
  + Select provided? ® Graphics Media Accelerator Driver for Windows * XP (exe) +.
  + and download it. +

  + Marvell Yukon Ethernet Driver +.
  Web page +.
  + http://www.marvell.com/drivers/driverDisplay.do?dId=175+

  + Or if this link does not try this: +.
  + http://www.marvell.com/drivers/search.do?reload=false+
  + On the right side, select ' W2000 / XP/2003/Vista x 86 & x 64 multilingual Installer (32-bit and 64-bit) for Yukon devices +.

  + Create the XP drivers disk +.
  + Add SATA drivers for a copy of your XP install CD using a program such as NLite. +
  + You have enough spare memory hard drive take a copy of your XP (about 700 MB) installation CD. +
  + Launch the program "sp37005.exe" and it will install on your hard drive. Do not install to a floppy disk. +
  + Download "NLite" of: http://www.nliteos.com/download.html+
  + When you run NLite it will probably say that you need to install ".net Framework", if so, quit NLite and go find the program. It is a Microsoft program that you can find by performing a Google search for the corresponding page on the Microsoft Web site. +
  + Now place your drive to install XP in your CD drive, if it autoruns, leave him. +
  + Run Nlite and follow the instructions on the screen. +
  + The program will ask where is your XP disk then it will ask you where you want to save the copy. +
  + On the screen "Task Selection", select "Drivers" and "Bootable ISO". Press "next". +
  + Select "Insert" and then "Folder pilot several" and now go and find your downloaded files of the SATA driver. Now, select 'All' and ' OK. The program will list the available SATA drivers. Select only the two that mention "ICH8M. Now press "next". The display will show the selected drivers. Press 'Next' and then 'Yes' to the prompt and then on "next" when done.
  + You are presented with the "Bootable ISO" screen. +
  + Put it a new inflammable CD in your CD burner, wait for it to be recognized and out any window that might appear to allow you to install files.
  + Now in Nlite, under "Mode", select "Direct Burn" +.
  + Under the 'Label' enter something like "XP for Toshiba Satellite A200" to identify the drive. +
  + Advanced settings to leave alone and now add the other required drivers by clicking on explore and copy them to the root directory to the temporary directory on your hard drive XP. It might be better to create a "Drivers" folder in the root directory to make them easy to find later. +
  + Now, click on the "Burn" button Now follow the remaining instructions to complete. +
  + You have now created an XP installation disc that contains your SATA drivers. +
  + - As you can tell, it of sound altogether, but avoids having to buy a USB floppy drive and it provides a neat solution. +

  + Hasta La Vista! +
  + Now you are ready to start the cleaning process, if you are brave enough to continue... +.

  + First, re-boot your laptop and the all start-up press F12 to change the boot order so that the CD-ROM/DVD-ROM is first. You can also use F2 and then change the Boot order from there. +

  + Now, insert your new XP installation disc in the DVD/CD drive and re-boot the PC, select boot from CD when you are prompted. +

  + The XP CD will now start copying the files and possibly display an options screen.
  + Select this option to install Windows. +
  + And then remove the hard drive C: partition (with Vista on) +.
  + Delete the partition used by Vista also F. +.
  + You will have to follow a lot of warning messages to delete the partitions. +
  + Now follow the instructions to create an NTFS partition on the C drive. +.
  + Now install XP by following the instructions. +

  + Don't worry that the graphics are a bit large as once Windows has finished installing, you can run the graphics driver you copied on the the XP CD to correct this. +

  + Run three driver files: +.
  + win2k_xp14311.exe Intel graphics driver.
  + INFINST_AUTOL.exe Intel chipset software installation utility ' +.
  + Marvell Yukon Ethernet Driver Setup.exe +.

  + Your graphics card must now improve and you should now be able to connect to the web (after the execution of the web Setup Wizard). But do not do this until you have installed your anti-virus software and firewall. +

  + Now go to "Device Manager" by "Control Panel" then "System" and then "hardware". Then look for any yellow question mark for all the problems. Right-click and run 'Update Driver' for the Hardware Update Wizard and allow the PC to search the web "this time only. +

  + If all goes well, everything should work OK now. +

  + Now go and have a drink to celebrate! +

  * After completing the installation, I found that I had no work wlan driver on my laptop. They are here (RTL8187B_WLAN_Adaptor), but with a big yellow question mark. I tried reinstalling them but it made no difference. I don't know why they don't will be will not installed properly.*

  * All went well and seem to work and all the familiar screens were there. I started using it and wanted to transfer some info from the laptop to my office. I copied the files on a disc using Ashampoo Burning Studio 7 and it seems to work, he went through the whole process without a hitch. When he had finished I checked the drive and it was empty he had no files on it at all. I tried several types/brands but the results (or lack of) is the same. The drive reads the discs will not drive write. Any ideas? *

  Thanks for reading this and I would appreciate any help/advice you may have.

  See you soon,.

  Mike

  Hello

  This means that everything is working properly without WLAN connection and burning the discs?

  Well, are you sure that your laptop is equipped with RTL8187B WLAN card? Therefore, you can check the vendor and device ID in Device Manager.
  But for all the portable Toshiba, you can download the driver WLAN here:
  http://APS2.toshiba-tro.de/WLAN/

  In addition, it would be interesting to know which drive you exactly used for the engraving process. I only use high-quality Verbatim and TDK media. I don t use Ashampoo or Nero, I use CD Burner XP because it the freeware tool and I can do anything I want with this program.

  Check it!

• Re: Equium A200-1V0: Vista won't load - system restore does not

  Toshiba Equium A200-1V0, purchased January ' 08
  Vista Home Premium

  Upgrade office 2007, rebooted fine, saved all the files. I went looking for vista security updates & Office including. Net3.0 - pc crashed during installation. F8 to repair pc & system restore to front office installed. everything seemed well & rebooted ok so I have backed up all critical files.

  reinstalled office 2007 & vista hanging on the required reboot.

  Try to load in safe mode & vista hangs at crcdisk.sys. It was suggested to remove all pcmcia & 1394 drivers, but the switches/s/p do not work in command prompt so I can't be sure enough to find them all to delete or rename.

  F8 for pc repair & while the menu appears, it is very slow to get there.
  Startup Repair detects no problem, System Restore won't work, so assuming that restore lost points (there were a few elders before the one I went to). Command prompt will run.

  Toshiba has provided a system restore disc, but crashes after language selection. It was suggested that the disk was duff, so I downloaded the ISO to a disk of vista without the extras toshiba restore & that said it is loading & then sits right on the blue/green screen of vista.

  I have a basic family official OEM of Vista editing copy for a new machine, I do build, so tried to boot from a full installation of windows (without formatitng) - this also hangs on the blue/green screen of vista. This is my first to face with a laptop without a correct installation disc, so if I format & reinstall the will I lose the recovery partition?

  Any other ideas of what to try?

  Hello

  I think that it s nothing wrong with the software, but with the hardware
  If the reinstallation of Vista is not possible then this could be caused by a hardware problem
  I can only suggest on the malfunction of HARD, RAM disk. Everything is possible

  If I you would be then I would format the whole HARD drive I would be to delete all partitions and would try to reinstall the operating system from the recovery CD

  If it is not possible, then you should ask the ASP in your country for a control from laptop s!

  Good luck

• On Equium A200-1V0 unknown BIOS password

  Hello

  I have an Equium A200-1v0 when turned to is ask a password of bios for which I have not so how do I solve this problem.

  markb68

  The BIOS battery has nothing to do with the BIOS password so don t spend your time disassembled. It can happen that do you some damage.
  I put t know how much it costs but if the laptop works well it is a worth paying. This old A200 is not bad machine and works perfectly with Win7 32 bit so that you can use next years without problem.

• Equium A200-1V0 - cannot create the hibernation file

  Equium A200-1V0, Vista Home Premium (SP2)

  Hibernation has disappeared recently. I just did a cleaning disc. I have tried to go to the command prompt and enter powercfg / hibernate on, but I get a message saying that the system could not create the file of hibernation with a specific error code: 0xc0000022.

  Suggestions, please?

  Thank you.

  Hi Peterspragge,

  You have enabled hibernation in Vista power management?
  What happens if you press the FN + F4 key combination to enter hibernation mode?

  I never had a problem with the Hibernate in Windows mode and I think that his Microsoft more related question.
  Have you looked on the forums of Microsoft solution possible?

• Equium A200-1V0 - how to use the Toshiba Recovery CD product?

  I used the reinstall xp on desktop before but do not need to do a reinstall on your laptop (toshiba) with vista with their product recovery disc. With vista, I had to find my own drivers etc. after the OS is installed on a clean drive.

  I want to clean the disc by using a product of drive wipe as Dariks boot and nuke (used on office/xp computers some time and as a very clean before you reinstall drive) on my laptop Toshiba Equium A200-1V0 before inserting the product recovery cd.

  Questions-
  (1) is it ok to erase drive with DBAN - this usually effect the ability of the recovery CD to do its job?
  (2) how can I use the product recovery cd or it is free it is exposed just charge, boot from the cd and follow the instructions online?
  (3) it will return the laptop to the factory shipping status (i.e. don't have no need to look for the drivers, etc.)?

  Thank you very much for your help - just need to be reassured that have not is it a wipe and reinstall on your laptop and vista with a "recovery disc" (always a disc not specify that it is a full copy of the operating system

  James

  Hello James

  The recovery procedure everything is very simple and here are the answers to your questions:

  # You should not do. Before installing recovery starts the disk HARD integer will be automatically formatted, created new partitions and OS will be installed on the first
  # Start Notepad and press F12 repeatedly to enter the boot menu. When the menu is displayed a recovery media in the optical disc drive. In the menu choose the CD/DVD drive and press ENTER. Follow the meny on the screen. After that two or three click OK installation will be implemented.
  # Yes

  When the installation is complete just start computer laptop again and wait until the operating system will be prepared for the first start. It is not necessary to install any additional software.

• Equium A200-1VO - "a disk read error has occurred."

  Hello

  I had my Equium A200-1VO since December 2007 and has never really had any problems with it atall.

  However, last night after a Windows Vista update and restart, my laptop won't start upward. I get a black screen announcing:

  "A disk read error has occurred.

  Please press Ctrl + Alt + Delete to restart»

  I've had no BSOD, and no other suggestion that something was wrong, everything worked perfectly. I checked the HARD drive to see if it had come off his link and reinserted it. But I get the same message.

  I am presented with the only possibility to use the recovery disk, but this means wiping everything out there and start again. I'd rather try to recover my documents before taking radical measures, if it is possible atall.

  If anyone has any suggestions I would be very appreciate.

  Thank you very much

  Mark

  Equium A200-1VO
  -Numtxpackets® Pentiuma® Dual - Core Processor T2310 - genuine Windows® Vista® Home Premium Edition - DVD Super Multi (Double Layer) in car-2 048 (1 024 + 1 024) MB of RAM (667 MHz) - 15.4 "WXGA TFT screen 1 280 x 800

  Hello

  In my view, the error message says a lot: theoretically, your HARD drive may be defective and must be replaced but before that I would test using fitness to drive or another program. Just use Google to find such programs.

  Maybe something was tangled up in your Windows installation. About reinstalling Windows?

  You didn't back up your data to a second drive? I m wondering about this, because the backup should always be made.
  However, if you use an external HARD drive box you can save it on another computer.

  Good luck! :)

• Problems with iTunes sync - Equium A200-1v0

  Hello

  wonder if someone could help with this?

  I have trouble to synchronize my Toshiba Equium A200-1v0 with my iphone in itunes.
  The laptop worked well with an ipod for years are, however, have no joy with the iphone.

  Someone suggested that my drivers may need to be updated.
  How can I find the specific drivers needed?
  Anyone else had a similar problem with itunes?

  Thank you

  Why do you want to update the driver for laptop?
  This has nothing to do with the laptop.
  I guess that this is related to the Apple software and I recommend to reinstall this kind of things together.

  I had also some problems with the iTunes software. I put like that, but I need to synchronize the files with my iphone and I had to reinstall it many times to make it work.

• Equium A200-1V0 - Internet disconnects when I play a game

  I have an Equium A200-1V0, I'm guessin' I don't have to be precise with the form on this page to Toshiba, but its dual core 1.46 GHz, HDD 120 GB, 2 GB RAM and I can't seem to find the graphics of wht there (not very good for games).

  When I surfed net everythings good, usually, when I'm streaming shows and movies everythings good but when I play Runes of Magic of MMORPG after 20 minutes or until the internet disconnects. When you check wireless no possible networks appear, but the computer in the other room is still plugged on the wireless. If I turn off and turn on the connection, he begins to work for another 20 minutes (in game time), or fine for web browsing etc. I don't know what the problem is, but I was wonderinf what a graphics card fault or the network card expires? Is the game download too much data?

  How can I solve this problem, I've been looking at a portable game because I don't feel it's a fault of modem wireless but rather something wrong with the laptop.

  Help, please!

  Hi Huel,

  I can t say much about it because I've never heard of this game and I think that you should contact the manufacture of the game. Maybe it s a known issue and it s caused by the game.
  Check this box!

  Just the idea that I have right now is updated the WLAN driver. You can download the latest version here:
  http://APS2.toshiba-tro.de/WLAN/

• Equium A200-1V0: can not play Holy gold game

  I just bought an Equium A200-1V0 and installed the sacred gold game but when I try to play the game it comes up with the error message that there is no disc in the disc drive.

  Even when I try to start the game from the disc instead of the shortcut on the laptop.
  Someone has encountered similar problems and found a solution?

  Have you installed it correctly?
  How about you, the possibilities of support from manufacturers of game?
  Maybe it's a known issue and a patch is available

• Equium A200-1V0 and sacred gold problem

  I just bought an Equium A200-1V0 and installed the sacred gold game but when I try to play the game it comes up with the error message that there is no disc in the disc drive.

  Even when I try to start the game from the disc instead of the shortcut on the laptop.
  Someone has encountered similar problems and found a solution?

  It seems that you have already posted this question in the beginning thread:
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=106693#106693

  It s advisable to say in thread and follow the a start to start the different views.