Equium A200 - continuous beep on startup

Similar Questions

• Satellite Pro A200: A continuous beep on startup top and freezing

  Hello

  It comes to Varun of India. Could someone please help me solve a problem which has been haunting me the last two days. This problem is currently arising in my Pro A200 satellilte. Actually, the problem is that one continuous beep sound from internal speaker at startup is when the name TOSHIBA appers at boot time and more it freezes it right of this screen. But, I still somehow using my system by pressing F5 or F9, and then let it start manually in NORMAL MODE.

  But, I can't keep doing this all the time. And what is more, this beep blows continuously only when the system is started and it will hang up within the same screen until I press F5 or F9. I did restore my system but no use. Could someone please help me in this.

  Sincerely, waiting for the answer...

  Verhoeven...

  Hello

  To be honest, it's very strange question. What is some external device connected to your laptop?
  Have you tried to update the BIOS to the latest version?

  Sorry, but I think that in this case, there is not a lot, you can do it. Perhaps the BIOS update, clean install of the OS. All that s.
  Maybe you should contact the closest service and ask what it can be.

• Computer continuously beeps at startup but is not on (Compaq Mini CQ10-500)

  Hello, if I was about to do a factory restore on my computer later in the day, but I was unlucky that the computer has stopped working when I turn on it beeps continuously and won't turn on, I chose the option "Start windows normally" and even the possibility that files (to fix the problem don't not let me start) controls/Diagnostics , but when he says "loading files" it begins to beep again and the process stops.

  Someone please help me with this?

  I also read that he "might" be a problem with the RAM, but maybe it was for a different problem or if, but if it's a problem with the RAM, so how can I solve this problem?

  Hello Cosmic_Wolf,

  I understand your beeps at startup.

  You can try reinstalling the RAM.

  Remove the ram and then reinsert it.

  Also do a hard reset.
  Turn off the computer.
  Remove the power cable and battery.
  Hold down the power button for 15 sec while booth energy sources are deleted.

  This should reset the hardware in the computer.

  That you put it on press the F10 key. This will load the BIOS setup utility.
  Press F9 to load the default values.
  Press F10 to save and exit.

  When the computer starts up, check if everything is working.

  I would like to know how everything goes.

• continuous beep on startup and the black command screen

  I have problems with the boot on my computer laptop gateway. I bought it last year, and despite the update anti spyware and etc., he refuses to start after a black screen.it command refuses to go into hibernation mode is that drives me crazy. When I try to put it in this mode the red light that usually indicates the hibernation mode flashes 3 times faster and when I open the screen it displays the screen of welcome without a moments notice. is this just a virus? or is it something else. I don't have the keys sticky and I clean them every week and ran the antivirus program several times a week since I bought it.

  Hello

  Sound beeps are error codes that describe a problem with your machine. A continuous beep
  can mean keyboard (loose or bad cable), losing the card, power, a short circuit or other matter according to the
  System/BIOS manufacturer.

  Startup and select CONFIGURATION/SETTINGS (BIOS/CMOS) - usually F2 that you start - look to see BIOS
  Creator, then see here:

  Computer MESSAGE / beep codes
  http://www.computerhope.com/beep.htm

  If my computer beeps and won't start, what do the beeps mean?
  http://KB.IU.edu/data/afzy.html how to troubleshoot Beep Codes
  http://pcsupport.about.com/od/nonworkingcomponent/HT/beepcodestb.htm

  POSTAL Codes beep
  http://www.technick.NET/public/code/cp_dpage.php?aiocp_dp=guide_beep_codes

  Power on Beep Codes post
  http://www.pchell.com/hardware/beepcodes.shtml

  It can be so other check with the manufacturer of the system.

  ----------------------------------------------------------------------------

  Are there any error messages? May be material.

  Check with Support technique Gateway, their documentation and online drivers.

  Gateway drivers and downloads
  http://support.gateway.com/support/drivers/dlcenter.asp

  Technical support Gateway
  http://support.gateway.com/support/?cmpid=topNav

  Door Documents
  http://support.gateway.com/support/SUPINFO/index.asp?cmpid=topNav

  I hope this helps.

• Equium A100-306 beeps at startup

  Hello

  I have an A100-306 which, at startup, beeps for about 30 seconds, then starts up fine and then works perfectly, if I look at the laptop all the ram is recognized and the CPU seems very well, there is no display problem, the only thing that doesn't work is the CD drive doesn t recognize disks but the drive shows on the laptop , but if I remove the CD drive still beeps on startup anyway.

  Any ideas anyone?

  Hello

  The beep code during POST (power on self-test) means that an error has been detected on the motherboard.
  But it of really difficult to say what could be the problem here, you said RAM is recognized correctly hmm try to remove a RAM module and start Notepad using RAM only one in each slot

  All devices are connected to the laptop? If so, unplug everything (all devices) and try again.

• Qosmio G10 - continuous beep on startup

  Hello

  I have a Qosmio G10. It worked well recently again. Now when I start it, I hear a continuous beep. There is also no image on the screen.

  Can anyone help?

  Thank you very much

  Martin

  Hello

  I agree with dfj if you didn t Exchange some hardware components or even added a new one, there must be a hardware problem and you should contact technicians.

  Good bye

• Continuous beep on startup that goes once connected - Satellite 3000

  I just brought a satellite laptop computer opportunity 3000-214, which worked well on the first departure to the top, but I turned it off then decided to turn right back on and now it makes a nosie continuous beep until windows load then stops. The machine then works perfectly since then. Any ideas.

  [Edited by: admin on 5 February 06 12:45]

  Hello

  You said that the unit stops Windows load. Is the unit freezes or stops?
  Have you checked the battery status? Try to remove the battery and after a few minutes trying to plug it in again. Try to start the device again.
  If this doesn't help the Toshiba service should check the laptop.

• Acer Aspire V3-571, a continuous beep on startup

  Hello

  I have an acer aspire v3 - 571 that keep a beep on startup. I can get into Windows 7 by pressing "ESC".

  However, after I enter Windows and use my browser (mozilla firefox), the Web page is scrolled automatically at the end of the page. Despite manually by pressing the scroll bar and bring the scroll bar to the top of the page, just wedpage keep automatic scrolling at the end of the page.

  Initially, I suspect my wireless mouse was defective, but even after changing for wired operation smile, the problem persists.

  Now I am suspecting if the problem is the built-in trackpad or the built-in keyboard key 'END '. Please en; ighten me on what I need to do to solve the problem above.

  If it is a sound signal and go to page END...

  There are many more to check, take a look at your 'End' button, use a cloth with compressed air to clean up a bit.

• Continuous beep on startup to the top and the cursor does not not in HP laptop

  Original title: hp laptop problem

  cursor movments ok but the press function works and the sound beeps is emitted continuously are all in sbooting

  Hi Sumiyav,

  1. Since when are you facing the issue?

  2. are also deal with any other performance issues with the laptop?

  3. What is the number of the model of the laptop?

  4. do you have a security program installed on the computer?

  5 did you a recent software or changes to the material on the computer?

  Provide us with more information so that we are able to help you the best.

  You can also view the article from HP:

  Resolve startup issues (Windows XP, Me and 98)

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=bph07173&cc=us&DLC=en&LC=en&product=57628

  Alternatively, you can contact HP for known problems:

  Contact HP / Customer Service

  http://WWW8.HP.com/us/en/contact-HP/contact.html

• continuous beep on startup top and dysfunction following press set to date. __

  I have a Vaio FE41E with Vista Home Premium.  2 days ago, that he began to beep continuously start and hang until I pressed F12. Then he would start but the touchpad has become inoperative and it started flashing uncontrolled through menus, drop-down boxes and radio buttons.  After that the hours spent trying to solve, including several restorations system several times, I did a full reboot to factory settings.  All right, including the installation of SP2, but today the problem comes back again once.  It could have been caused by another update.  Does anyone know what update could be the cause of this problem?  Or is it something else?  Thank you very much.

  If you have a sound problem, which is normally a sign of hardware problems.

  http://www.pchell.com/hardware/beepcodes.shtml

  http://www.5starsupport.com/info/beep_codes.htm

  See if the foregoing gives you an overview of your beep problem.

  http://pcsupport.about.com/od/nonworkingcomponent/HT/beepcodestb.htm

  "How To Troubleshoot Codes sound"

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  To diagnose issues of update:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Equium A200 - white screen at startup

  Hi all

  I need help. I just turned on my laptop (it has not been used for a few weeks) and it doesn't move on the loading screen, the loading bar scrolled so it collapsed. Its just very annoying. I rebooted several times, tried to take the battery, but still no difference. It has been "loading" now for about 10 minutes, then stopped loading and that a screen is empty. The keys are also beep if I click on them. The laptop is only 4 months and rarely used... could someone please advice?

  Details of the laptop:
  Toshiba SATELLITE A200-1VO

  Thank you! :-)

  Have you tried to reinstall the system?

  I mean you can try to boot from the restore CD that came with the laptop.
  In this case, you could test whether the material is ok

  If you will not be able to boot from the recovery CD and the laptop does not start the system, then you should ask the authorized service provider in your country for assistance of security seems to be valid and that's why everything has to be done for free

  Good luck

• Satellite M30 - continuous beep on startup

  Hello

  I hope someone can help. I have a Satellite M30 - around the age of 18 months. When I turn on is comes up with a black screen and beeps continuous, light blue under the Start button / stop flashes constantly and takes a good 20 seconds or more before loading Windows... Only, this has happened for the last week or two.

  Any ideas on what is the problem?

  See you soon

  Hi Picard

  I presume that there is obviously a hardware problem, but on this path, it is impossible to say why. You did some hardware finally pass as memory upgrade?

• Re: Satellite A200 - sound beep after startup

  Hello world

  Recently my laptop has started to be malfuntioning.
  Yesterday, after the start (or when you take it out of fashion 'sleep'), it started beeping.

  Beep, it's 10 minutes in a row, fast.

  I run a stock standard Satellite A200 Windows Vista Help.
  I don't know what to do, and over the ringtone (which lasts about 10-15 minutes) I can't do anything - the CPU (I think) simply cannot handle all of the processes. The ringtone comes from the right side of the laptop and is fake, but certainly a sign of a problem.

  I believe it has something to do with the motherboard, but I don't know how to diagnose this problem, and after hours of research I have not found someone with a similar problem to mine.

  I'm sorry if I posted this in the wrong forum, also the advice to confused and I just can't find a support technique one.

  Help, please
  Victor11

  Hello

  If I understand your problem, it seems that you are not able to enter the BIOS and you are not able to boot the operating system Window.
  You don't see that the home screen Toshiba so is good?

  Hmm, it seems that this sound signal is related to a hardware malfunction
  Then maybe the POST (power on self-test) cannot be spent properly and so you get this alert beep

  What to say; in most cases it mother s associated with, but it is difficult to say which could be exactly wrong

  Maybe you can try this;
  Remove the battery and unplug the power adapter for a few hours
  Wait and after a while connect the two parts again
  Then try again to turn the unit

  If this does not work, then I would recommend asking a technician help in ASP.

• Satellite A200-1O5 - beep at startup

  Hello

  My satellite makes sometimes a few loud beeps when starting the Bios for about half a minute.
  After that, it starts to boot the OS (Vista) without any problem.
  But something must be wrong (because of the beeps).

  What could this be?

  Thank you very much.

  Gerd

  Hello

  If a stuck keyboard key it can cause these beep codes you have spilled something on the keyboard in the past?

  Everything works correctly if Windows has started, or do you have other problems too?

  As already written Akuma I recommend you contact a service provider authorized too. Guys can check your laptop because it is difficult to say what part is affected without exact diagnosis and it is possible that professional people. You can find a list of all FSA here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)

• Equium A200-15I - random crash & startup problems

  Hello

  I recently experienced a few problems that began with intermittent "block white screen" - keyboard not responding, only one capable of re - start by the power button Manual on my laptop. He spent a few times now and not appear related to any program I use (it crashes just awaiting a response to a program). The screen is usually, but not always, the whites when it occurs (it crossed my mind that color [a uninterrupted tone] seems to be regardless of the predominant color on the screen was just before the accident).

  Since then, despite a few days without error, the problems have intensified: today the computer had problems to feed to the top at all. When she did I had the normal thing "could not start properley last time... check/correct errors. He reappeared, and random crashes.

  I use mainly from Vista, but I don't have a dual-boot option that I put in place because when the system boots (the drive is partitioned), so I also use XP occasionally. The accidents occurred in the two operating systems.

  Here's what I did in the way of diagnosis/fixing the problem:
  -Scan/repair disk returned no error hard drive that I could see.
  -Ditto for the RAM (I also checked to see if it was mounted properley)
  -As far as I can tell the fan is working properley and I cleaned up (I thought that accidents can be related to overheating).
  -J' used service of Toshiba Tempro to search for the drivers and updated and there is no update imprtant absent from my machine.

  I think I can anticipate the advice're - format and restore to factory settings', but I have a very good reason for what in fact a very last resort. I'm due to hand in my thesis at the end of the month and there are a lot of programs and customizations, that I can't afford to lose right now. But if necessity...

  Help! It is massively distracting for me right now...!

  Thank you very much, Richard :-)
  p.s. I might add that I am about six weeks out of warranty (the laptop is just over a year - purchased from Curry). I don't know what the policy is to support and repairs out of warranty, but this should not be happening with an old 1 year machine! Cheers :-)

  How did you test the RAM? Use www.memtest.org

  It could be a motherboard or the failure of the VGA card.