Continuous beep on startup that goes once connected - Satellite 3000

Similar Questions

• Equium A200 - continuous beep on startup

  A colleague has spilled water on an A200 Equium and therefore it emits a continuous beep on startup. In fact, you get one beep, immediately followed another. However, if you press F1 it starts OK and all is well. I ran Diagnostics and found nothing wrong.
  The only problem is that one or two of the keys work fine if you lightly touch them.

  Someone has ideas about resetting the sound signal, or what I could do? Thank you.

  Andy

  Hey,.

  I think that it s is not easy to say why this is happening but maybe the water has damaged the keyboard and there so always will be in a hurry I don t he know exactly.

  I think that it is not so useful for you if we discuss it here without test and we don t have made real for your laptop should be checked by a technician of the laptop. Guys can make a detailed diagnosis and order spare parts.

  On the Toshiba site, you can find a list of good luck of suppliers registered!
  :)

• Satellite Pro A200: A continuous beep on startup top and freezing

  Hello

  It comes to Varun of India. Could someone please help me solve a problem which has been haunting me the last two days. This problem is currently arising in my Pro A200 satellilte. Actually, the problem is that one continuous beep sound from internal speaker at startup is when the name TOSHIBA appers at boot time and more it freezes it right of this screen. But, I still somehow using my system by pressing F5 or F9, and then let it start manually in NORMAL MODE.

  But, I can't keep doing this all the time. And what is more, this beep blows continuously only when the system is started and it will hang up within the same screen until I press F5 or F9. I did restore my system but no use. Could someone please help me in this.

  Sincerely, waiting for the answer...

  Verhoeven...

  Hello

  To be honest, it's very strange question. What is some external device connected to your laptop?
  Have you tried to update the BIOS to the latest version?

  Sorry, but I think that in this case, there is not a lot, you can do it. Perhaps the BIOS update, clean install of the OS. All that s.
  Maybe you should contact the closest service and ask what it can be.

• Computer continuously beeps at startup but is not on (Compaq Mini CQ10-500)

  Hello, if I was about to do a factory restore on my computer later in the day, but I was unlucky that the computer has stopped working when I turn on it beeps continuously and won't turn on, I chose the option "Start windows normally" and even the possibility that files (to fix the problem don't not let me start) controls/Diagnostics , but when he says "loading files" it begins to beep again and the process stops.

  Someone please help me with this?

  I also read that he "might" be a problem with the RAM, but maybe it was for a different problem or if, but if it's a problem with the RAM, so how can I solve this problem?

  Hello Cosmic_Wolf,

  I understand your beeps at startup.

  You can try reinstalling the RAM.

  Remove the ram and then reinsert it.

  Also do a hard reset.
  Turn off the computer.
  Remove the power cable and battery.
  Hold down the power button for 15 sec while booth energy sources are deleted.

  This should reset the hardware in the computer.

  That you put it on press the F10 key. This will load the BIOS setup utility.
  Press F9 to load the default values.
  Press F10 to save and exit.

  When the computer starts up, check if everything is working.

  I would like to know how everything goes.

• continuous beep on startup and the black command screen

  I have problems with the boot on my computer laptop gateway. I bought it last year, and despite the update anti spyware and etc., he refuses to start after a black screen.it command refuses to go into hibernation mode is that drives me crazy. When I try to put it in this mode the red light that usually indicates the hibernation mode flashes 3 times faster and when I open the screen it displays the screen of welcome without a moments notice. is this just a virus? or is it something else. I don't have the keys sticky and I clean them every week and ran the antivirus program several times a week since I bought it.

  Hello

  Sound beeps are error codes that describe a problem with your machine. A continuous beep
  can mean keyboard (loose or bad cable), losing the card, power, a short circuit or other matter according to the
  System/BIOS manufacturer.

  Startup and select CONFIGURATION/SETTINGS (BIOS/CMOS) - usually F2 that you start - look to see BIOS
  Creator, then see here:

  Computer MESSAGE / beep codes
  http://www.computerhope.com/beep.htm

  If my computer beeps and won't start, what do the beeps mean?
  http://KB.IU.edu/data/afzy.html how to troubleshoot Beep Codes
  http://pcsupport.about.com/od/nonworkingcomponent/HT/beepcodestb.htm

  POSTAL Codes beep
  http://www.technick.NET/public/code/cp_dpage.php?aiocp_dp=guide_beep_codes

  Power on Beep Codes post
  http://www.pchell.com/hardware/beepcodes.shtml

  It can be so other check with the manufacturer of the system.

  ----------------------------------------------------------------------------

  Are there any error messages? May be material.

  Check with Support technique Gateway, their documentation and online drivers.

  Gateway drivers and downloads
  http://support.gateway.com/support/drivers/dlcenter.asp

  Technical support Gateway
  http://support.gateway.com/support/?cmpid=topNav

  Door Documents
  http://support.gateway.com/support/SUPINFO/index.asp?cmpid=topNav

  I hope this helps.

• Acer Aspire V3-571, a continuous beep on startup

  Hello

  I have an acer aspire v3 - 571 that keep a beep on startup. I can get into Windows 7 by pressing "ESC".

  However, after I enter Windows and use my browser (mozilla firefox), the Web page is scrolled automatically at the end of the page. Despite manually by pressing the scroll bar and bring the scroll bar to the top of the page, just wedpage keep automatic scrolling at the end of the page.

  Initially, I suspect my wireless mouse was defective, but even after changing for wired operation smile, the problem persists.

  Now I am suspecting if the problem is the built-in trackpad or the built-in keyboard key 'END '. Please en; ighten me on what I need to do to solve the problem above.

  If it is a sound signal and go to page END...

  There are many more to check, take a look at your 'End' button, use a cloth with compressed air to clean up a bit.

• Qosmio G10 - continuous beep on startup

  Hello

  I have a Qosmio G10. It worked well recently again. Now when I start it, I hear a continuous beep. There is also no image on the screen.

  Can anyone help?

  Thank you very much

  Martin

  Hello

  I agree with dfj if you didn t Exchange some hardware components or even added a new one, there must be a hardware problem and you should contact technicians.

  Good bye

• 2 beeps on startup and the white screen - Satellite P300 - 19 p

  Hi guys,.

  I installed an Express card yesterday and he did all sorts of havoc (IRQ conflicts, hook etc.).

  I went to reboot this morning and he is now just give me 2 beeps and nothing on screen. I watched the phoenix bios beep codes, but it is not listed. Any ideas if I do a reset of the BIOS with a rider?

  Of course I tried to remove the Express card!

  Any help would be fantastic

  Thank you

  Owen

  Hey Buddy,

  BIOS resetting is possible only to an authorized service, but I think that the BIOS is the problem because these beep codes mean that a hardware malfunction has been detected

  What you can do is to remove the battery and the AC adapter for an hour and then reconnect the two. Your laptop boot?

  If not it material s serious malfunction and you must contact a technician from laptop to help.

• continuous beep on startup top and dysfunction following press set to date. __

  I have a Vaio FE41E with Vista Home Premium.  2 days ago, that he began to beep continuously start and hang until I pressed F12. Then he would start but the touchpad has become inoperative and it started flashing uncontrolled through menus, drop-down boxes and radio buttons.  After that the hours spent trying to solve, including several restorations system several times, I did a full reboot to factory settings.  All right, including the installation of SP2, but today the problem comes back again once.  It could have been caused by another update.  Does anyone know what update could be the cause of this problem?  Or is it something else?  Thank you very much.

  If you have a sound problem, which is normally a sign of hardware problems.

  http://www.pchell.com/hardware/beepcodes.shtml

  http://www.5starsupport.com/info/beep_codes.htm

  See if the foregoing gives you an overview of your beep problem.

  http://pcsupport.about.com/od/nonworkingcomponent/HT/beepcodestb.htm

  "How To Troubleshoot Codes sound"

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  To diagnose issues of update:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Continuous beep on startup to the top and the cursor does not not in HP laptop

  Original title: hp laptop problem

  cursor movments ok but the press function works and the sound beeps is emitted continuously are all in sbooting

  Hi Sumiyav,

  1. Since when are you facing the issue?

  2. are also deal with any other performance issues with the laptop?

  3. What is the number of the model of the laptop?

  4. do you have a security program installed on the computer?

  5 did you a recent software or changes to the material on the computer?

  Provide us with more information so that we are able to help you the best.

  You can also view the article from HP:

  Resolve startup issues (Windows XP, Me and 98)

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=bph07173&cc=us&DLC=en&LC=en&product=57628

  Alternatively, you can contact HP for known problems:

  Contact HP / Customer Service

  http://WWW8.HP.com/us/en/contact-HP/contact.html

• Satellite M30 - continuous beep on startup

  Hello

  I hope someone can help. I have a Satellite M30 - around the age of 18 months. When I turn on is comes up with a black screen and beeps continuous, light blue under the Start button / stop flashes constantly and takes a good 20 seconds or more before loading Windows... Only, this has happened for the last week or two.

  Any ideas on what is the problem?

  See you soon

  Hi Picard

  I presume that there is obviously a hardware problem, but on this path, it is impossible to say why. You did some hardware finally pass as memory upgrade?

• Satellite A100 beeps at startup and goes straight to the mode without boot failure

  When I turn on my A100 there is a beep and I'll striaght on-screen 'safe start mode.
  I can then load normally in windows XP and everything is OK. Is something missing?

  The computer is less than two years.

  See you soon
  John

  Hello

  > 'safe start mode.
  Do you mean that your Windows operating system starts only in safe mode?

  If yes then it might be something wrong with the system files or the registry.
  How do you reinstall the operating system on your laptop? Is it 2 years ago?
  Eventually it s time for a new OS update?  :|

  If you the problem is only with the software, then a new recovery would solve the problem.

  Good luck my friend

• start up continuous beep and the cursor keeps blinking

  my computer is continuous beep on startup for a few days now, and when it finished start keeps him from the flashing cursor, please any help

  Hello Emeka

  You may have a problem with your keyboard or your mouse.

  Try each and connect it again and see if that fixes it. If your computer starts to make noises beeps at startup upward once again you will need to give your keyboard a thorough clean or replace.
  Hope this helps
  Martin

• Keyboard and beep on startup with Satellite A80 problem

  Satellite A80 continuous beep on startup after the keyboard does not work. He writes only

  Post edited by: habib00

  Hello h,.

  I suggest you to bring your machine to a local service partner, or at least by a technician who is familiar with toshiba laptops, because your question looks quite related to the material.
  Someone pour some liquids above? I had the same problem a few years ago that my sister pours coke on the keyboard of my satellite 2430. :(

  Would like to hear a response from you :)

  Welcome them

• After downloading the update for Yosemite 10.10.5, I got an annoying popup with a beep sound blaring that says that Safari crashed. I've forced to leave Safari, rebooted and popup returned once more. Restarted again and popup went. What was it?

  After downloading the update for Yosemite 10.10.5, I got an annoying popup with a beep sound blaring that says that Safari crashed. I've forced to leave Safari, rebooted and popup returned once more. Restarted again and popup went. What was it?

  Open Safari while holding the SHIFT key

  Try to reset the settings of Safari:

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select the Preferences/Privacy tab

  4. click on remove all data from the Web site

  5. close Safari.

  Remove cache Safari files:

  1. click on finder

  2. look for the menu GO to top

  3. click on GO and hold down the option key. This will show a user library folder.

  4. click library and find the Caches folder

  5. in the folder caches com.apple.Safari Ouvrezledossier

  6. move the Cache.db file Trash.

  This should solve the problem. If it does not help, try to disable the Safari extensions

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select Preferences

  4. find the Extensions tab

  5 disable all extensions of

  6. relaunch Safari