Equium A300D - microphone and speakers are not working

I have an annoying problem.

With my soundcard on its default pilot, I can't the microphone (taken before) to pick up something.

Yet when I update with the latest drivers I then lose the speakers onboard and cannot get sound by connecting external speakers.

Can anyone help?

Hello!

I put t understand why the speakers on board do not work with the last orders.
Have you downloaded the driver from Toshiba?
http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

In addition, you should check if you have the latest version of the BIOS. There are two versions of the BIOS: one for Vista 64-bit and one for Vista 32 bit. In order to choose the right one do the update.

Good bye

Tags: Toshiba

Similar Questions

  • Microphone and speakers do not work with Skype in my laptop

    Original title: audio and microphone

    My microphone does not work it is built into my laptop. When you use Skype I can't hear the party that I talk and they don't hear me. I don't know if my speakers and microphone are set correct. Help, please.

    Hello
     
    The problem only occurs with Skype?
    Follow the steps mentioned below.
    Step 1:
     
    You can use the connection from your sound card line to connect a portable music player, microphone or other device for audio input to your computer.
     
    Most sound cards have at least a line-out port to connect speakers and a line-in port where you can connect to an audio input device.
     
    However, the line of connection to your sound card is disabled by default. This means that if you plug an audio device into this port, it will not produce any sound on your computer until you enable the sound to connect online.

    To enable sound for the line
     
    a. open Control Panel > click on sounds
    b. click on the playback tab, click speakers and then click Properties.
    c. click the levels tab, and then under online, click the Mute button to turn on the sound for the connection line.
    The line of connection is disabled by default.

    Step 2:
    Check the microphone in the sound recording.
    See also:
     
    Check both links below

    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • Since the upgrade to ios 9.3 on my iphone 6, links in the email and SMS are not working and freeze the apps.

    Since the upgrade to ios 9.3 on my iphone 6, links in the email and SMS are not working and freeze the apps. If anyone has had this problem and if yes, how do solve you this problem?

    There has been a number of similar reports. See also http://osxdaily.com/2016/03/25/troubleshooting-ios-9-3-update-problems/

  • Microphone and speakers won't work - HP Pavilion laptop dv7

    Hello

    Last night I was using Skype and my internal MIC was not working (it's the only microphone that I had). I was confused and he looked in the forums of HP and found this: http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/dv7-Pavilion-integrated-microphone-array-Sk...

    I followed the instructions:

    Check if it works, otherwise you have to uninstall and reinstall the driver.

    1. click on start, type: DEVMGMT. MSC in the search field and then press ENTER. It opens the Device Manager window.
    2. go to the category 'Sound, video and game controllers' and expand it. Right-click on the entry of the IDT high definition Audio Device, and then click on uninstall

    3. click on start-> all programs-online REcovery Manager-> click Dirver Hardware installation, select the Sound Driver entry and click on install.

    For step 3, I am looking for the Recovery Manager and I find the HP Recovery Manager, I then select "drivers and reinstall applications" to the title of immediate assistance. I tried to reinstall the driver for IDT HD Audio Driver. Tried twice and both times it failed.

    Now my computer doesn't have speakers... When I hover over the volume icon in my toolbar, it is said that there is no speakers or headphones installed. I need my speakers... Is this something that can be corrected?

    I don't have the capabilities to mic. When I go into the properties for under sound recording, there are NO MICROPHONES appear. I bought a microphone, external and plugged in, and it does not work as well. The microphone is not as important to me as the issue of the speaker, but I still want this corrected.

    If anyone can help? I know that I probably did something wrong and I'm far from being 'good' with computers... Any help would be appreciated!

    Thank you

    Amanda

    Hi Amanda,.

    Try the following.

    Download IDT Audio Installer on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52658.exe

    One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

    When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

    Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

    Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

    Kind regards

    DP - K

  • product name: Pavilion g6-2255sx problem: speakers are not working correctly

    Sometimes I turn on the computer and the speakers do not work but after reboot they begin to function normally... when I go into the control panel and try to test the speakers a poster error that looks like this

    "This device is used by another application close all devices that are audio playback on this device and try again.

    don't know what that means

    Hello

    Try the following.

    Open windows control panel, open Windows Update, select "View update history" in the left pane and then select "Installed updates" link in the next window.

    Locate the KB2962407 update, right click and choose uninstall.  Once completed, restart the computer, open windows control panel, open Windows Update and select "Check for updates".  You will see the update that you have uninstalled just offered once again - right click and select "Hide update".

    After that you may or may not need to remove and reload the sound driver - if you do, how to use Recovery Manager to reinstall the drivers and software is detailed in the document in question on the link below.

    Recovery Manager - Windows 8.

    Recovery Manager - Windows 7

    Kind regards

    DP - K

  • Trackpad and keyboard are not working windows 7

    I just installed windows 7 and I do the first set upward but my trackpad and keyboard do not work, I tried to use a keyboard usb and bot mouse still the same, any help?

    FC5 drivers are installed? You can find the drivers in the links on installing Windows 7 and previous versions on your Mac with Boot Camp - Apple Support .

  • my microphone and headphones are not found and are connected... Installation of Windows 7 is the new...

    I have just browsed the Forum and see that a lot of people have this problem...
    with me its what... I install win 7... all updates work very well...
    My speakers work when I use the Jack on the back... I use a router, so it goes through my hi fi system...
    now when I plug my head ohones I hear jack pink or green room in the back.,. and at the front of my Tower...
    I did the same checks, everybody does... check his maps updates etc... the window opens on my sound u8p... detects the speakers... no helmet (just says they are not attached?)
    It's cabbaging my head... im on win 7 64 bit... im trying different headphones, still nothing...
    I also try headphones with microphone-a built... Hmmm always says that they are not plugged...
    I have a web cam... althopugh it is say part of the cam is not compatible with win 7 64 bit... because of driver or something... the finding of the microphone on it... This baffles me too because Yes, it is detected, but... I can't hear a dam thing and I can't talk on Skype...
    Grrrrrrrrr... taps his head...
    Any advice would be greatly apreciated please and thank you

    Hi sativa66,

    Try these steps and check if you get the headphones:

    1. open the control panel. (Classic view)

    NOTE: open the start menu and click on the menu button of the control panel.

    2. click on the audio icon.

    3. click on the recording tab.

    NOTE: this also works on the reading tab, but there are usually no hidden audio devices there.

    4. right click on an empty area and click Show disabled devices.

    5. you will now see the audio devices disabled with the arrow pointing down on them.

    NOTE: these audio devices may vary depending on the installed audio card or chip you have.

    6. right-click on each listed off audio device that you want to activate and click Activate.

    7. Once you activate the device, you will see the headset.

    NOTE: you can now change the property settings on these audio devices in the way you want.

    8. click OK to close the sound window.

    Kind regards
    Abdelouahab

  • Re: Satellite C660 - keyboard and touchpad are not working

    Satellite C660 - 28H

    Win7 64 bit

    Kaskpersky antivirus deleted the file 'system32/driver/cekbfilter.sys' for reason of keylogger (Kaspersky Support says error of file anti-virus, Kaspersky is not virus or virused), and after I restarted OS I find keyboard and touchpad not working do not at all.

    Also I already asked to [US Toshiba Forum | http://forums.toshiba.com/t5/Keyboards-Touchpads/satellite-c660-cekbfilter-sys-deleted-and-no-keyboard/td-p/364673] and he has been Advisor to ask here also

    I can't use Windows recovery (have no recovery point) and I don't want full recovery of factory default - there are many flexible and personal data stored.

    So here how to get the drivers? As I have already said to US Toshiba Forum - I already tried to delete the driver of pad touch and installation of synaptic official site and I haven't changed anything.

    I also think that antivirus can remove not only the file, but some patches to remove the pilot "wrone.

    Eh, it's very stupid situation now. I never had such problems, but it will be interesting to find solution to this.

    Have you tried to connect a mouse outside, just to see if this can work? I want to say that it is much easier to use Windows with the mouse and choose different options.

    If it works, try to open the Device Manager and properties for the keyboard. You will find the option to update the driver. Check if you can find some update driver. The keyboard uses the standard Microsoft so f driver, you may be in line that some drivers are.

    Of course the best solution and easiest for you is recovery facility. If you don t want to do this try to find right drivers using this driver update option.

    One last thing: If you have a lot if important saved on the HARD disk you can remove your laptop and plug it into the other PC / laptop as external device and make a backup. After doing this you can install the recovery image and the problem is solved.

  • My WIFI and 4G are not work with specific applications, even though I have access to both?

    After the new update, the applications on my phone are not connected to my 4G or WIFI network home. I tried to reset my phone, but the problem persists. I am still able to call and text, but it's using my data even when I'm at home. I don't know how to solve this problem. This would have something to do with a new application that has appeared in my settings: (null)?

    Hello Mia,.

    I understand that you are having multiple problems with your applications and data connection. You also see an option to Null in the settings app. For me, it looks like you need to restore your iPhone. Let's go over how to do this and then sync thing back above.

    I would like to start with updates on your iPhone. It will be particularly to the research in the App Store, as well as in settings > General > software update. If it's all the goo, then you want to transfer iTunes purchases to have a safe copy of them. Once that is done, is to reset your iPhone in settings > General > reset > erase all content and settings. Let it finish and then start downloading or synchronization of the applications one at a time to test. If it works, you can speed up and synchronize the rest of the file content.

    After erasing and setting up as a new device, your device is now in a factory setting. Try again what you were trying when you first found the question to determine if erasing and setting up a new device solves the problem. Contents of the device could have caused the unexpected behavior.

    • If the problem persists, you can contact the Support technique Apple.
    • If the problem is resolved, a type of synchronization of content both on the device. For example, if you had a problem reading music, add songs to iTunes and confirm that they will play. If your contacts have not been loaded successfully, you can add contacts to the rear. After each sync, test to see if the problem is back.

    Take a look at the article below to learn more in-depth details on how to do this.

    How to clear your iOS device and then set up as a new device or restore from backups
    https://support.Apple.com/en-us/HT204686

    Take care

  • Satellite A80 - 154 - keyboard and Touchpad are not working

    Hello

    I bought a Toshiba Satellite A80 154

    The keyboard doesn t work.
    I see the light, but no key worked. The same thing with the touchpad.
    I can t go into Bios.

    When I plug a keyboard and USB mouse in works fine.
    I am looking for a new Ebay. The best offers $ 24 + $ 6!

    I see in the Windows, the keyboard and the touchpad with one!
    I put t know what the problem is, but it's not a prob of Windows.
    It doesn t work either in Bios.

    Thank you for the help

    Hello

    It looks like a hardware problem.
    If the warranty is valid, you can contact the ASP in your country for a verification of the material.

    If the warranty is not valid, you can first check if the keyboard cable is properly connected to the motherboard.
    If it s properly connected then a keyboard failure is possible and it would be wise to check if a replacement would help solve this problem.

    Compatible parts can be ordered also from the ASP in your country.

  • have a 3 years old, nev er used to have problems with speakers toshiba laptop but now neither speakers are not working and I do not have the built-in speakers for netflix natural

    read the title, I can't get extra added on the speakers to work regularly, drives crazy me, can't hear netflix movies

    Hello

    What version of Windows are you using?

    • If your laptop uses the Realtek HD audio drivers then try to update the Realtek HD audio drivers for the last one is on the site Web of Realtek (who seems to have a lot of later Toshiba support site). After updating to the latest Realtek HD drivers, open the DD Realtek Audio Manager and enable "Loudness equalization.
    • Turn off the laptop (not a hibernation or sleep), Remove the battery and the adapter Plug and press the power on/off (nothing should happen, but it could fulfil all power remaining inside the laptop). Wait five to ten minutes and then reinsert both and reboot the laptop. For some, it seems that putting into hibernation and or "sleep" mode on these laptops cause the audio drivers to behave strangely.

    You can also try to go to Device Manager > click on the< next="" to="">

    Right-click on the driver and update or roll back to the driver

    Contact Toshiba technical support

    http://support.Toshiba.com/support/home

  • Re-buillt and bookmarks are not "working".

    Unfortunately my machine just died, and I have to re - build.

    I'm still not really 100% happy with the way I did things to get Firefox working again, but this isn't the problem.

    The bookmarks menu.

    Fortunately, I have a laptop and his favorites are pretty much the same as the desktop computer. So I imported the.
    Maybe it was the beginning of my problem/s.

    In the list of bookmarks, I have two basic/main sections:
    Internet
    and
    Intranet

    When I was (Note: has) on the site, and wanted to bookmark, I want to 'bookmark this page' and then use the drop down menus to find the directory where I wanted to put it.

    Now... I don't see the imported addresses list.

    What is going on?

    I also have problems on the laptop with the latest version (18) and google, so I want it to 17 at the moment.

    You must open the folder in the bookmarks menu to see other folders inside.

    • The Bookmarks Toolbar folder stores the bookmarks that you see on the (view > toolbars >) Bookmarks Toolbar.
    • The bookmarks Menu folder stores the bookmarks that you see in the menu bookmarks and create via ' bookmarks > bookmark this Page "or" bookmark this link "in the context menu.
    • The Unsorted Bookmarks folder stores created bookmarks by clicking on the star on the right end of the address bar.
  • Standby and Hibernation are not working

    I got my laptop from my college. It was a v7 Aspire 481p with 8 pre-installed windows. I wanted to install linux and the system has failed because of the "Secure Boot" functionality in the UEFI Bios. So I went in "Legacy" mode Now, the system is not started. I had a Windows 8.1 so I used it to start my system using a Bootable usb key with the bios in "legacy" mode

    8.1 windows successfully installed. Use the key that I had extracted from windows 8 using software "produkey" after installing windows 8.1. And 8.1 of windows has been activated. The system has 500 GB HDD + 23 GB SSD. Now, it's almost works very well and the bios is in "Legacy" Mode I have not yet installed linux. At the time current Backed up all my data on an external HARD drive.

    It is:


    I installed some drivers I downloaded at acer for windows 8.1. The problem is that the system does not properly in mode 'sleep' and in hibernation mode. In both cases, the screen turns off leaving power on the system. 

    Here are the screenshots of the list of the installed software before and after:

    Front (with UEFI Bios, windows 8)

    After that, now (present condition)

    The system is still in ' traditional '.

    Apparently, I have installed some drivers because I thought they might not be important, but I'm going to install all drivers and system software in the screenshot before.

    Help me, I would like to know where I am going wrong. I also want to install linux and UEFI with secure boot doesnot allow.

    Also let me know is to "legacy" mode has drawbacks. Speed of the system was unaffected much after the change in legacy mode in the bios.

    Expecting a quicker response.

    Thank you.

    Hello...

  • Satellite A100 - keyboard and Touchpad are not working

    Hello

    Toshiba Satellite Pro A100 to my daughter has developed a few flaws.

    First of all, the keyboard displays random characters like a stuck key. for example, if Google or Wordpad will be randomly type a single character over and over again even when no key is pressed. Sometimes it will also open windows or programs as sank the "enter" key, or scroll through the icons on the desktop.

    Second, the touchpad is inadmissible and cursor operation is not possible since the touchpad or buttons. I don't know if the two are related.

    She assures me that she has not spilled anything on the laptop, so any help would be appreciated to correct these mistakes.

    Thank you
    Brian

    Hello

    Can you notice the same problem with external input devices?

    Otherwise it s time for a service provider allowed. I think the keyboard and the touchpad should be replaced and the technicians can help you.

    On the Toshiba site, you can find a list of authorized service provider.

    Good luck! :)

  • I deleted from the temporary folder and now my microphone and camera do not work, the audio and the video hangs when activated

    C:\Users\John\AppData\Local\Temp and emptied, had like 20 GB of misc * in there, when I deleted it no error came, nothing has been locked. then when I didn't try to use my webcam (creative Webcam live pro v280) the audio and the video freezes as if taken in too much data to be processed during recording, and when I try to speak, it comes out as a big sound introduction text that's noise and videos recorded is accelerated as a 10 x. I bought a new webcam installed and everything went well, and exactly the same thing happened. (microsoft livecam this time) no sound. Anyone have any ideas?

    Hi Johnny,.

    Perform the System Restore to an earlier date and check if it helps.

    System restore

    System Restore can return programs and system files from your PC to a time when everything was working well. This will not affect your documents, images or other data.

    Hope this information helps.

Maybe you are looking for