Help! Redirection works only not on BEFSR41 V.2 port

Similar Questions

• "Messenger Service, or the Net send command not working only not on the service remote computerhe.

  Messenger Service, or the Net send command not working only not on the remote computer, despite the messenger service is started "it works only if I restart the service.
  operating system is windows xp
  service pack 3

  Hi Charbel,

  Have you done a recent software or hardware changes to the system?

  This problem occurs because the Messenger service is disabled. The Messenger service must run on the destination computer to activate the NET SEND command.

  Because the service is already started, and you must restart the service, you can try to stop the service, change the startup type to automatic and start the service. Check if it helps.

  Please refer to the article to define the service as automatic:

  Programs or services that use the alerts service or the Messenger service do not work as expected after you install Windows XP Service Pack 2

  For more information, see the article:

  The NET SEND command may not work correctly on a computer that is running Windows XP Service Pack 2

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• HP LaserJet M252dw: Airprint works only not on HP LaserJet M252dw

  We have a HP Color Laserjet M252DW in our business that we intend to use Airprint for printing from our Mac machines, but we cannot make it work.

  We use a Cisco wireless with a 2500 WLC. We have configured mDNS and are able to see other printers, but not the M232DW.

  What we have tried so far:

  > Search for the firmware updated (not available)

  > Reset the printer and reconfigure

  > Use the static and DHCP IP addresses

  > Restart the printer, WLC and Mac devices

  The printer is connected to the same network wireless as users. As I said, Airprint works on other printers, it works just not on this one.

  Any ideas of what I may be missing or what I can try?

  Hello

  I got to work. But only after I reset the default printer and it reconfigured.

  I needed to configure mDNS on Cisco WLC, then after I reset and reconfigure the printer, it took a little time to see the recording on the WLC and for Apple devices pick up (about 5-10 minutes).

  It took that long only for this particular model because the other HP printers have been detected immediately, but those are wired, however.

  To accomplish the same thing for devices Meraki see the following link.

  https://documentation.Meraki.com/Mr/Other_Topics/Configuring_Bonjour_Forwarding_for_the_MR_Access_Points

  Let us know if that helps. Just know you may need to reset your default printer, reconfigure, then wait a while.

  Sachin

• Audio & CD/DVD drive not working only not with Vista

  I have a laptop HP V6500 Pressario, with Vista Home Basic installed recently. I have two problems with my laptop:

  1 > there is no sound, and I see the error "no audio device is installed" with a red cross on the "speaker" icon.
  2 > drive CD/DVD is not visible in 'my computer '.

  These two problems are persistent, but begin to work from time to time, say once 20 times when I turn on the laptop, I see the CD drive and also audio works, but these work only for about 10 minutes...

  I tried the Dr.Fixit and it did not help and have also installed the latest drivers for my notebook to the hp site:
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=3550002

  Any help to solve these problems is much appreciated... Thanks in advance

  Hey riri,.
   
  Try these steps and check the result.
  Step 1: Delete the invalid registry keys
  1. Click Start, type regedit and press to enter. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  2. in the navigation pane, find and then click the following registry subkey:
  Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  3. in the right pane, click UpperFilters.
  Note: You may also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters. If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step 6.
  4. in the Edit menu, click on delete.
  5. When you are prompted to confirm the deletion, click Yes.
  6. in the right pane, click LowerFilters.
  Note: If you do not see the LowerFilters registry entry, unfortunately this content cannot help you further.
  7. on the Edit menu, click on delete.
  8. When you are prompted to confirm the deletion, click Yes.
  9. exit the registry editor.
  10. restart the computer.
   
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: see How to back up and restore the registry in Windows
  Step 2: Uninstall any software CD/DVD burning.
  1. Click Start, type appwiz.cpl and press to enter.
  2. from the list of programs, select CD/DVD burning software and click on uninstall.
  3. once the uninstall, restart the computer.
   
  See Uninstall or change a program
  Step 3: Install device drivers in a new user account.
  1. open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.
  2. click on manage another account.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. click on create a new account.
  
  4. type the name you want to assign to the user account, click an account type, and then click on create an account.
   
  See repair a profile user corrupted

  See also device in Windows Vista drivers

  I hope this helps.

   

  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Social sharing links work only not in v26

  We recently rebuilt our app for iPad only v25, v26 with Universal for the web viewer. In our version, v25, our social sharing has been installed and worked perfectly. For some reason, now that we have the v26 version, all our sharing links go to our redirect URL only.

  
  I've seen a few questions about the forum on the "renditions" and naming. If anyone has experienced this? I rechecked and social sharing is enabled in the App generator and Admin account in the box. We use WoodWing publishing so everything is and was not protected by default. This is one of the addresses that it provides:

  http://millennialeye.com?WV=s%2FMillennial%2520Eye%2F13e831a3f9a54b87a0d0669b4a9697d5%2Fco m.brynmawr.millenialeye.ipad%2F114.html

  You have no need to rebuild the app deleting URL accommodation should take a few minutes to take effect.

  Use the hosting URL only if you create a web viewer built-in.

• validation of single key works only not with the update

  Hi all

  I use jdeveloper 12 c on windows internet explore.

  I'm at the following link

  http://www.gabrielsideras.com/2010/09/28/ADF-unique-key-validation/

  It works only if I insert new records. After the update, it does not work. He leaves me no update.

  How to work around it please?

  Kind regards.

  User, tell us your exact jdev version, please!

  It works if yo udefine the unique key in the DB?

  Timo

• Screen Mode shortcut not working only not with the recent update

  Since the update to the latest version of the CC a few days ago, my shortcut to toggle mode screen (F) does not at all. I tried to reset my preferences and I checked my preferences of shortcuts - but nothing seems to fix the problem.

  Any ideas?

  Well, I finally got it working - but not quite how. A combination to reset the preferences, parameters of deleting and re-installing Photoshop. Although I had to reinstall twice before, it made a difference.

  In any case, fixed now fortunately! I appreciate the help.

• British Colombia blog links work only not in mobile view

  The site is http://www/tuckermarcom.com/blog .

  Someone with experience with links not working do not in your blog Business Catalyst, specifically in a mobile view?  I have a responsive model that uses the blog module, but for some unknown reason, the links inline in the blog simply do not work (not type) while in the mobile display (like an iPhone).  The blog titles, link to it is the landing page and system of links work well - it is the I added links that seem to have the question.  Any help would be greatly appreciated!  Thank you

  The hotfix allows the pop up in the General settings of the iPhone.  Minor correction - great results.

• Satellite A130: Fn key not working only not with Vista - only FlashCards

  Hello

  I've been looking around in the forums, but I couldn't find solutions to my problem.

  I have a satellite A130 and I am running a windows VISTA family Basic. I have a problem with my fn functions.
  I can only use flash on the top of my screen cards, just by dragging my mouse upwards on the top of my screen.

  The key works only when I start my computer, at startup, but when the computer is running, there is no other "fn", I could use but my mouse to show my flash cards and use them.

  Is there something else I could do?
  Thank you

  I have same situation, remove the starting windows for the form Flash cards and you have no pictures at the top of the desctop, but keys will work.

• SD card reader not working only not with El Cap.

  The iMac does not recognize the SD card when inserted. Nothing in the Finder. If I leave the card in the slot and restart the iMac, it is recognized. This all started after the upgrade to El Capitan. Anyone?

  Hello leiffromtonsberg,

  Please ask for help in the communities of Support from Apple. Looks like you have problems reading from an SD card with your iMac. Here are the things I would check.

  The first thing that you want to make sure that the data on your Mac is safe. You will need to use Time Machine to backup to an external hard drive. The recommendation is to use an external hard drive twice the size of your hard drive internal. Use this article to help make a backup: use Time Machine to back up or restore your Mac.

  Then, you need to determine what you want to open or to display when you enter the SD card in. If you are looking for pictures to open when you insert the SD card, when you enter the SD card, open the Photos. On the import tab, there is a checkbox "Open pictures for this device". Make sure it is checked. If it is checked, uncheck it and re-check. It is necessary sometimes to get these settings reset.

  If you are looking for only to have a pop up on the desktop image, please go to the Finder, then click the word Finder in the next to the Apple menu bar. Click on Preferences. Make sure that you check the tab general, and that the box for the external drives. If it is checked, uncheck it and re-check. Close the Finder preferences.

  If you are still not able to find the SD card on the desktop or in the Photos, you will want to check if it shows up in disk utility. You can check by opening Finder > Applications > utilities > disk utility. Make sure the SD card is showing correctly in disk utility without having to restart the Mac.

  If you still have the problem, with the insertion of the card and read by the Mac, look for more updates. There may be a new update driver or firmware required to get this working correctly with the new operating system. Use the App Store, updates, or contact the manufacturer of the SD card to see if they can provide updated information.

  Thanks again and have a great rest of your day.

• Scrolling touchpad features work only not on Tecra M3

  I mainly used a USB mouse with my M3 lately but went to use the touchpad, the other day and found the scrolling features (i.e. the right and at the bottom of the pad, used to scroll the active window) worked no longer. In the window options of two points, the functions are enabled. I tried altering the functions of the pad, but each time, the new settings have not been applied and next time, I opened the window settings, they were restored to their previous state.

  Any help would be appreciated!

  Colin

  Hello Colin

  I have Tecra M1 and there is the same as on your M3 Touchpad setting. I really don't understand how this can happen. I also use an external USB wireless mouse, but everything works fine. The only thing I noticed is that this feature is possible if the cursor is inside the window where you want to use this feature.

• Printer redirection works only to a point

  Hello everyone;

  I can't get a redirected printer to print on a client computer.

  RDS host is Windows 7 Professional

  RDS client is Windows 7 Professional

  Symptom: The reports generated on the host computer will not print on the client computer.

  Printer driver installed on the host and the client.

  Printer shows as 'Redirected' printer in the printer selection list

  Test print generated on the host sent to a redirected printer cannot print - no error.

  Break the local print queue (client).

  Test print will appear in the queue on the local computer (client).

  Release the job and it comes out of the queue but nothing prints.

  Looking for suggestions please...

  Thank you.

  Hello

  Thanks for posting your query on the Microsoft Community.

  I suggest you post your query on The TechNet Forums , because we have experts working on this type of questions and for you help the better.

  Check out the link:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Mouse and keyboard not working only not with the ERD in Windows 7 and Windows 7 install disc

  I have a Dell XPS 8700.  I just did an upgrade to an SSD.  The DSS started once with no problems, then it wouldn't start.  I get an error message 1 MBR.

  If I do a F12, I am able to boot from the SSD drive and everything works fine, but if any process requires a reboot it will not work.  IE, windows update that requires a restart does not update because it cannot restart.

  To fix the MBR, use either the repair or install disk to get to the command line.  I have two drives and when I boot with them I get the initial screen of language/keyboard and mouse and keyboard do not work.  I have the keyboard and mouse installed in USB 2.0 ports, their was also in 3.0 ports with the same results.  They work fine until the disc over to install the files, and then they die.  I tried 2 different sets of keyboards and mice with the same results.

  I also tried to use the Dell recovery disk and it did find and supposed to solve a problem when I ran in the beginning.  But I still get the MBR error.  The disc is represented and it did not find any problems and I wanted to reinstall windows back to the factory.

  Suggestions as to how to get my mouse and keyboard work again with the repair and install discs would be greatly appreciated.

  Hi Navneet,

  Thank you for responding.

  Did you change the computer other than the upgrade to an SSD?

  Yes, I have, but that was before the SSD.  I upgraded the video card and added a 1 TB of HARD drive data.

  What is the complete error message you get on the MBR?

  The message reads as follows;

  "MBR 1 error.  Press any key to boot from floppy. »

  There is no floppy drive installed and I even tried to start with only the connected SSD.

  Are you an error code?

  No error code.

  As for changing the BIOS, I am not satisfied with messing with the BIOS, if this isn't an option.

  After thinking about this problem, I think that Dell has disabled somehow able to use disc repair/install "Windows".  I say this because they have disabled the ability to create a disk to repair Windows out of the Dell system and cannot create a Dell recovery disk.  Also because Dell has changed the MBR it wouldn't do any good to reset the MBR to the default value of Windows and the Dell recovery disk does not give you the ability to recover the MBR manually only.

  I decided that the best option was to do a clean reinstall of the OS, and that's what I did.  Everything works great for now.   It is a PITA, but nothing that I have not done before.

  Thanks again for your help...

  Mahalo,

  DEX...

• Treo 750 unlocked GSM works only not abroad

  Hi, if anyone can help me I would greatly appreciate it!

  I have a new Treo 750 GSM unlocked. He worked with T-mobile in the USA, but now that I'm abroad, it does not work in Thailand. When I put in the new SIM card, I get just a no service upper-left.  I tried to pass parameters to GSM only, so far, nothing works. Any thoughts?

  Well, it's working now. I left the phone for a few hours and just re-tried the settings in the preferences to search for all GSM and tried both options to strip again. This time, it worked. Thanks for your help.

  Message is about: Treo 750 (Cingular)

• Problem with the connection works only not with the caterers

  I have a weird problem with logging, and perhaps someone here can point me in the right direction to watch. I have install a FileHandler customized for different newspapers. He worked for a few years. Now it no longer works. Nothing is found in the log file even if it is created.
  
  I have narrowed it down to there's a change in the JVM. If I run application under JDK 1.6.0_05 (what I had in production), it works. If I run the current JDK 1.6.0_22 application, it does not. This is on Solaris 10 and the only change I make is to change the symbolic link 'later' in ' / usr/jdk "to a JDK version or the other. It is reproducible 100% of the time. Use the old JDK and it works, use the JDK again and it's not.
  
  I'm at a loss as to what could be wrong.
  
  Here is the code which implements the Manager and associate it with the newspaper:
  
  Recorder L = Logger.getLogger (loggerName);
  If (null! = level) {}
  l.setLevel (level);
  }
  System.out.println ("logger level is" + l.getLevel ());
  If (null! = useParentHandlers) {}
  l.setUseParentHandlers (useParentHandlers);
  }
  String loggerPattern = logDir + reason;
  Manager: new = FileHandler (loggerPattern, limit, count, append);
  h.setLevel (Level.ALL);
  Formatter F = new UniformLogFormatter();
  h.setFormatter (f);
  l.addHandler (h);
  Logger.info ("FileHandler added [" + loggerPattern + ",]" + limit + "," + count + "," + add + "] for logger:" + loggerName);
  l.info ("open log file");
  
  I see the 'open log file' but never to see any other message of the breast journal. The "server.log" sees the messages, however.
  
  Any help will be greatly appreciated.
  
  Brett

  At one point, the internals of the LogManager/writer classes have been modified so that they maintain WeakReferences for child loggers. My guess is that your code is not keep a hard reference to the logger which you set up and it becomes garbage collector more later in time (and so do not have all future messages).