erasure of the computer to start again

Similar Questions

• I already turn to the backup car but the computer make them again, why?

  I already turn to the backup car but the computer make them again, why? He made my hard drive full... If I have to delete it after a while... How to stop this thing?

  Hello

  What backup program utility do you use?

  Meanwhile, refer to this link:

  http://Windows.Microsoft.com/en-in/Windows-Vista/back-up-and-restore-frequently-asked-questions

  However if you are using Windows Backup, then try to turn off shadow copy of Volume and check if the problem reappears. It manages and implements Volume Shadow copies used for backup purposes and others. If this service is stopped, shadow copies will be unavailable for backup and the backup may fail. If this service is disabled, any services that explicitly depend on will fail to start.

  Steps to follow:

  a. Click Start, type services and press to enter.
  b. Locate the "Volume Shadow Copy" service and right click and click on "Stop".
  c. close the windows Services.

  Please come back with more information.

• The best words can't be removed permanently. He must have installed a hidden file that creates the add on every time the computer is started.

  I inadvertently allowed the best words to add to install for Firefox. It's annoying adds and sometimes links to malware. It can be disabled or removed from a session and become non-functional after you restart Firefox, but whenever the computer is started, it reappears. I guess it must be a file hidden somewhere that re - installs the add-in on each time the computer is started. Does anyone know how to permanently delete it?

  Hello HLT44, try to run a full scan of your system with security tools like the free version of malwarebytes and adwcleaner.

  Fix Firefox problems caused by malicious software

• Error BIOHD-2 but the computer works normally again

  My HP, p6310y had problems starting recently, so I did the f9 diagnostics start upward and received the biohd-2 error message. After the diagnosis, the computer could start without a problem. Went looking for a specific diagnosis to the HD for my HD-WDC-WD10EADS65M2BxScSI - and after long and short scans - several times, everything going on.  But there are still some problems, although most of the time the computer is able to stop a reboot without any problem. Some issues are: freezes or no bootable partition found. But once more, after F9 running diagnostic, I am able to restart the computer and able to do what I have to do without any problem. I have removed important information from hard drive and have a new hard drive waiting to replace the old. The hard drive is really the issue here, or is there something else wrong?

  Other important info

  Operating system: Win 7 64-bit home premium

  No virus found during the analysis

  All other system controls are normal

  The only way to cure a bad mother with this problem should it of bin and get a usable by all the other hardware.  Here is an example: http://www.amazon.com/M5A78L-M-LX-PLUS-Micro-Motherboard/dp/B005WUUFBW

  Not much on the expense and it should accept all the other materials.  Remember you should do an investigative research to make sure it will fit in the case wherever you have, etc.  Also, the Windows 7 OEM will not like the new motherboard and will require a key retail.

  You can get a new office at this time of the year for a reasonable price, then look at this aspect, too.

• Windows didn't prepare the computer to start the next phase of installation

  Hey I get the error "windows has no prepare the computer to start the next phase of installation" during the installation of vista and Windows 7, I use xp professional I would like to mention that a few days ago, I company vista works well, so I thought I should update to the win 7 but since that day I have my receive this error message and also I could not install vista  , the specifications of the system are: optima PC with motherboard 2.8 GHz intel and intel 865GLC inside the processor 2.8 GHz, 1 GB ram, 160 GB HDD
  PLEASE please help me I lost so much time, but all in vain :(: @.
  I also tried msconfig utility chkdsk, but she shows that its fine and also unplugged all other additional devices in the connection only the mouse and keybard but no American (e):
  PLEASE SOMEONE HELP ME

  Hello

  These are forums for vista for home pc users

  you use enterprise

  Try the vista it pro forums

  http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro/

• Cannot install Windows 7 "Windows didn't prepare the computer to start the next phase of the installation." to install Windows, restart the application.

  Original title: Installation of Windows 7.

  I tried to install Windows 7 (clean install from XP and reveived the following message is displayed:)

  Windows didn't prepare the computer to start the next phase of the installation.  to install Windows, restart the application.

  I restarted my PC, anti anti-virus disabled (as advised) and still get the error message.

  According to the Upgrade Advisor Windows 7 my PC is compatible.

  Any ideas?

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• Get 'no scanners were detected. If a scanner is installed, make sure that it is turned on and connected to the computer and try again. "

  Original title: Windows Fax & Scan

  Hello, I just bought a new printer (Canon MG2450), and every time I try to scan something an error comes out.

  The error that says:

  No scanners were detected. If a scanner is installed, make sure that it is turned on and connected to the computer and try again. For more information about adding or troubleshooting scanners, see Help and Support.

  the printer is powered on and connected. I tried searching the Internet and I tried the TWAIN_32 and everything is good.

  What can I do?

  Daniel Capelle

  The scanner came with a CD to install the software?  Some more recent does not come with a CD, you must go to the Canon Website and you get the software.

• Download "Windows didn't prepare the computer to start the next phase of the installation during installation of Windows7.

  When installing windows7 in the second phase, it gives error such as ' Windows has not to prepare the computer to start in the next phase of installation.to install Windows, restart the installation. " It comes at the end of 50% of the extraction of windows.

  How you attempt installation?

  You are upgrading from a previous version of Windows?

  Are there devices non-essential attached to the system as a external hard drive or USB key?

  If so, try to disconnect them, they might interfere with installation.

  Could you give your full system specs?

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

• How to reset the computer to start the boot minimum troubleshooting.

  I posted this screenshot because I have no idea what can be the maximum size of a question and I thought I have copy paste this but I to Sir's life saw the question so I did this. Additional information that could help. This is my task manager open resource monitor and windows firewall not wanting to tk starts. And I have windows updates where I chose to update (I try to deny each update.) And so far I've checked that I have 482,5 MB of updates of windows that say I should put to date. (apperently 130 important and 10 optional) in addition apperently my computer don't think that I am administrator I do not understand when I'm the only profile on the computer.

  Hello

  In response to the information provided by you, please try to follow the methods and check them off below if this can help,

  Step 1: Scan of Sfc.

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  Follow the steps below to perform a scan of the SFC.

  1. press the Windows key + X key.

  2. Select prompt (admin).

  3 type the following command:

  Sfc/scannow

  Step 2: Clean boot.

  Make your systemclean boot State helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  https://support.Microsoft.com/en-us/KB/929135

   

  WARNING: After troubleshooting, refer to the section «How to reset the computer to start normally after a boot minimum troubleshooting»

  Please let us know if the problem is resolved or you need additional assistance.

  Thank you.

• CS5 install Fail: installation met an error(-1) during installation. If please restart the computer and try again.

  Running CC of Photoshop and Lightroom CC on a MacBook Pro (with CS5/Adobe Bridge).

  Adobe Bridge broke so I uninstalled the full program of CS5 and when I try to reinstall from the CD, I get the dreaded installation met an error(-1) during installation. If please restart the computer and try again. "message.

  Have not been able to find a solution for the moment. Any help would be greatly appreciated,

  Thank you!

  [Duplicate message deleted... post the same question more than once is confusing... MOD]

  [This is an open forum, not a direct line to Adobe support... you have to wait a response]

  Maybe it's a fake because of Mac El Capitan and OLD programs error

  This information is a MUST to install old programs on Mac El Capitan

  -You can't get the same error message, but these two links will help with older programs

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  FAQ on the Mac 10-11 https://forums.adobe.com/thread/1979303

• I tried several times to set up an email account with Thunderbird, but the next time I start the computer and start Thunderbird, no account is displayed.

  I bought a new desktop PC with Win 8.1 and installed Firefox and Thunderbird.
  Then, I tried to set up the e-mail account manually (in IMAP) following the instructions here: https://support-en.upc-cablecom.ch/app/answers/detail/a_id/22 , but can't set the mail server outgoing smtp correctly (I could receive mail but not send them). Subsequently, I deleted this account. Then, I started the automatic mail with UPC Cablecom under the http://www.upc-cablecom.ch/content/dam/www-upc-cablecom-ch/Support/executables/upc-cablecom-email-assistant.exe link tool and he did successfully set up the account, however, because a POP3 server account. As I was not happy with it, I deleted the server of incoming POP3 mail (and lost the e-mails received, of course...) and retried a manual installation. In doing so, I got an e-mail account IMAP incoming more two outgoing SMTP server (comparing them, I also understand the configuration error that I had done the first time). I then deleted the manual as SMTP server the automatically the installation server worked correctly.
  In this context, accepting them and sending E-mail worked OK. However, the next time I started the computer, the e-mail account disappeared and Thunderbird was asked to set up a new account again. I have successfully set up manually once more, but the same problem resurfaced at the next startup, the e-mail account was gone...!

  Thank you in advance for your help!
  Maxonce

  Verify which profile is used.

  AppMenu button - help - troubleshooting - profile directory - Open Directory information

  Your profile folder should open in Windows Explorer. What is the location of the profile?

  Restart your computer and repeat the steps above. The profile folder has changed?

• XP start screen flashes then restarts the computer (usually start in any mode, restarts just instantly)

  Hello

  My xp computer has stopped working completely for some unknown reason. Last Friday I took my girls login Thinkpoint virus successfully. Nobody is using the computer since then when my daughter connected today it froze after a bit of use. It restarted, and now it won't start at all. It shows the BIOS loading but then flashes the screen and loading XP restarts. If I try to reboot safe mode or use the last known good config that the computer still does not start XP.

  I already did the following:

  Check disk

  Bootcfg/Repair

  System recovery (the one where you will install a new XP (with OS CD started from) but hitting R instead)

  I am at a loss about what to do in addition to do a format/reinstall. There is no document import on this computer, but it would be better to do not reinstall.

  P.S. It's a Dell Precision 390. And he has a strange video card, DVI dual nVidia Quadro NVS 285. Ive never seen anything else like before.

  Thank you

  Hello

  (a) you can follow this link to perform a manual system restore & verify if you are able to start correctly on the desktop.

  How do I recover from a corrupted registry that prevents Windows XP startup

  (b) If you are able to boot to the desktop, you can run virus scan anonline again from the link below. If you have antivirus software installed on your computer, please install the latest update of the software to make it work properly.

  http://OneCare.live.com/site/en-NZ/default.htm?mkt=en-NZ

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have two versions of the same book on my iphone and ipad.  I want the same book, so I can study on each device.  I tried to remove the books and start again.  It does not work.  Help.

  I have two versions of the same book on my iphone and ipad, which are not synchronized with the other.  I want the same book on each device, so I can study on one or the other.  I tried to remove the books on my phone, ipad & itunes and start again.  It does not work.  Help.

  Hello david.hogan87,

  Thanks for posting about what is happening. If I understand you correctly, you have a book you want on your iPhone and iPad, but neither is synchronizing correctly to have both.

  Have you checked every device to confirm that the same identifier Apple is signed all three?

  iPhone and iPad: head to settings > iTunes and App Store

  iTunes: on a Mac, it's under account or installed depending on the version of iTunes store.  On a PC, it is also under account, and if you don't see the menu bar, click on the triangle in the upper left corner to view the Bar Menu or CTRL + B on the keyboard.

  If all 3 have the same signed Apple ID, post the version of iOS and iTunes for all three devices here, please.

  Best regards.

• Can't access google when the computer is started to the top

  I get a page that covers the entire screen which is red and won't let me see the google search box

  I sent a response which says that it has been corrected, but when I turned off the computer and restarted the screen was covered with the same red box.
  There is a box that appears saying compatible Audit Add ons, but it goes and comes very quickly, with nothing to stop it or click it.
  Help
  Mike

  Try to rename or delete the file prefs.js and possible prefs - numbered # .js and a user.js file possible to restore the values all default prefs.

  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/Resetting_preferences

  Create a new profile as a test to see if your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but make sure not to copy corrupted files.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  Try to start the computer in safe mode Windows with network support (on the startup screen, press F8) as a test to see if that helps.

• I bought an iPhone from a person, but they are always saved in their iCloud and iTunes, the person doesn't remember their password and now I can't get my hands on them. I want to erase the phone and start again

  How can I clear my phone and start again.

  (I bought the phone from someone else), but they are always stored in their icloud

  Must remove their account. This is the only way and there is no work around. No one else can help you.