Error 0x8007045D when move/rename a file

Similar Questions

• Error 0x8007045D when opening a .rar file

  As I am trying to extract a .rar file... it hangs up and then said ' the request cannot be performed because of an i/o device error. (0x8007045D) '... I used and extract this file in particular several times before... but since yesterday its does not or extraction... what this means?... and how can I solve the problem and retrieve important files?

  Hello

  1. what applications do you use to extract the .rar file?

  2. How did you extract the file?

  Perform a disk check and see if it helps.

  Check a drive for errors (Windows 7)

  Warning of Chkdsk.

  Important: when running chkdsk on the drive hard if bad sectors are found on the hard drive, then chkdsk attempts to repair this sector. If no data is available while data may be lost.

  Hope this information helps.

• an error occurred trying to rename a file in the destination directory code 5

  When I try the installed software on this time its error getting
  ; an error occurred trying to rename a file in the destination directory code 5

  Hi Sissi,

  1. What is the full error message do you get?

  2. This only happens when you try to install a particular program?

  3. using the administrator account?

  Step 1:

  You can try to take ownership of the file or the folder and check.

  How to capture a file or a folder in Windows

  Step 2:

  I also suggest you temporarily disable the antivirus software third and firewall on the computer and check to see if that fixes the problem.

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.

  Note: Make sure that you enable the antivirus software, other security and firewall after the test programs.

• When you rename a file change the last timestamp consulted?

  I was in a heated debate with one of my instructors today associated with a test on the access timestamp question when you rename a file. Through my research and testing to rename a file via the command prompt, it does not appear that the process of renaming a file will change the date of that last file access. Access and modify times will change to the directory that contains the file, but not the file itself.  So my understanding is that it is not, however, my instructor insists that it is, can someone shed some light on this topic please?

  Reading material more - it's interesting.

  More information under:

  Windows NT keeps track of three stamps of time associated with files and directories. These three temporal are written in creation, last access, and last. When a file or directory is created, accessible or changed, Windows NT updates the appropriate time stamp.

  http://support.Microsoft.com/kb/148126/a

  NTFS uses the change log to track information on the added files, deleted and changed for each volume.

  http://TechNet.Microsoft.com/en-us/library/cc938919.aspx

  Working with file systems

  http://TechNet.Microsoft.com/en-us/library/bb457112.aspx

• When you rename a file highlights only the name and not the name extension.

  Hi all

  When I rename a file, it highlights only the name part of the file name and not the name extension.  I need the name of entire file highlighted when I rename a file.  Where is the setting to change this?

  Thank you

  Pete

  Hi Pete,.

  Engineers also writes a blog on why they made this change, but to prevent millions of calls to support technical questions "I renamed my file and now it no longer opens.
  It might be possible to change this behavior with editing the registry, but I couldn't immediately find a reference to such a value.
  However, I have a workaround.  I usually press F2 to rename a file (I'm a lover of keyboard, hate having to use the mouse).  So I click on F2, then if I need to select both file extension, I can make one of these:
  • Press Ctrl-A
    or
  • Press SHIFT - end

  I generally use the method of shift - end because it's closer where my fingers are already on the keyboard (I'm a lover of keyboard, but I'm too lazy).  Hope this helps at least a little.

• Error 0x8007045D when copying files from computer to external hard drive

  I am trying to copy some files from my drive HARD outside., but I get this error (error 0x8007045D: the request could not be performed because of an i/o device error).

  I run windows check disk on my external hard drive, I tried to run windows defrag, but it takes too Lowe and cancel (external HARD disk is 1 TB). I download a software defrag and defragmented my hard drive using fast (the software is O & O Defrag). I tried on another computer and got the same error. Is it a hardware problem. Y at - there any possibility to fix it. Thank you for helping

  Hello Nyfixen,

  1. have you changed the permission for the external hard drive or files you are trying to copy?

  2. you have all important data (files) stored on the external hard drive?

  3. are you able to copy the external hard drive to the computer?

  The Autorun.inf could not be a problem for that. It always seems to be a problem of permission for me. Some hard drives have a jumper on them for write protection. You should check the configuration of jumpers, thank you consult the manual that came with the hard drive for permissions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-know-before-applying-permissions-to-a-file-or-folder

  Format hard drive:

  Read this article for more information on this:

  http://Windows.Microsoft.com/en-us/Windows7/create-and-format-a-hard-disk-partition

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 0x8007045D when you try to install Windows Vista SP2

  Hello

  Currently I have Windows Vista SP1 and want to upgrade to service pack 2. When I try to do the update of Windows, I get "error (0x8007045d) Error_IO_DEVICE. I also tried to install it in safe mode, I get the same error message. After having traveled a bit on the internet, I found that it is probably because my HDD is damaged... so I run the chkdsk program...

  The chkdsk program stops at 16%... Step 4 of 5... When 85785 files off 300000something files are done... and it does nothing more. It keep running like this all night, it goes no further.

  Does anyone have any suggestions on what I need to do to successfully install Windows Vista SP2?

  Thanks for your help!

  OK, I started the computer with the Windows CD and I ran chkdsk /f at a command prompt.

  Chkdsk /f found errors it corrects.

  I ran Chkdsk/r... .he got stuck after scanning 85763 files... near the place, he would always get stuck (85785 files)... so I guess it's the same file that crashes chkdsk.

  The good news: I still have a functioning computer.

  The bad news is that I ran the SP2 from windows update in new safe mode and it didn't work... I'm still stuck with my problem.

  I have an extra hard drive... that I ordered from Dell for my girlfriend's computer, his computer died before she could use the player, but it is larger, then the drive of your computer and it is brand new... the only downside is that the player has been implemented for the computer of my girlfriend (pilots and other things) and does not work in my computer. I guess I'll try to format that drive to make it work in my computer... it should fix this and then bad SP2 remedial power very well.

  I guess I have no choice.

  I suggest to remove avg (uninstall) then try sfc/scannow then chkdsk /f several times. a few times, they need more going to make things more

  Microsoft security essentials is a better a v for not update couseing problems.

  You can allways put avg in the back.

  not having is not enouph to free space for temporary files can couse problems too.

• Is it possible to cancel when you rename a file?

  (1) music files moved to mobile phone (USB mass storage mode)

  (2) phone has the limitation on the characters of filename

  (3) changed a filename and the next thing I know, I have 25 files renamed "BB King & Claption - Riding With the King" (of course, each with [2], [3], etc. [4] annexed)

  (4) looked anywhere obvious for "UNDO" command (NO obvious!)

  (5) waste of time connect the [so-called] relevant search terms help... Nada!

  (6) could someone please direct me to the absolutely necessary UNDO function in this case, work with files in a folder!

  Thank you, in advance.

  There is a short window of opportunity to cancel action (move, rename, copy type) file in Windows Explorer or the windows folder using the Edition Menu (or by pressing Ctrl-Z).  You will see Cancel Rename as option for example.  Only the most recent file action is not achievable, so it is too late.

  It seems that you had several selected files when you made the name change. When you have several selections that Windows renamed it using the name that you enter and sequential numbers in square brackets.

• Error 3307 when build in Essbase file importing

  We have a build file based on the level of dimension, which is a CSV file with 5 fields and some 13 000 lines. When you import the file by using a load rule, we get 75 mistakes in the .err file. An excerpt from the .err file is as follows:
  
  \\Record #4242 - parent incorrect [G] member [G4S] (3307)
  C057038317, C057038317 - G4S, G4S, G, customer, customer group, other accounts
  \\Record #11502 - incorrect parent member [UG Ltd] (3307)
  C043678386, C043678386 - Ltd of UG, UG Ltd, U, customer, customer group, other accounts
  \\Record #11503 - wrong parent [U] member [UG Ltd] (3307)
  C044178034, C044178034 - Ltd of UG, UG Ltd, U, customer, customer group, other accounts
  
  
  I rechecked the existing members and there is no member of duplicate names / conflicts here. Please can anyone suggest what could be the problem? I found a similar to the below post, but it was not successful:
  
  Error of incorrect Parent during build Dimension type "add as a child of.

  This generally means that the Member has been added already sketch to another parent, that is before construction in the construction of dimension or dimension and in your dimension build you do not allow the parameters move members.
  For example your G4S member if you look in your plan, I bet you find (whether as a member name or alias) and its parent company is not 'G '.

• Receive error 5 when writing to a file

  Running Windows 7 and get this error 5 when trying to write to a file

  It seems such a simple thing, I used writing files on other projects without any problem but

  He does not play on the Win 7 machine (and another one)

  
  

• error 42 when creating a zip file

  Hello

  I get a 42 error when I try to create a zip file in Labview.  I am deploying to a PSC module.  I try to create the file, and then my loop will close a data file when it gets to 1 meg and add it to the .zip file open and open another file of data.

  I can't test the part until I can open a zipfile first.  Seems that I do not know how to specify a path? My way, that I use for the data file is "c:\k2XXXX.dat" with XXXX being the graduations to current.  And the zip that I use is "c:\K2data.zi" why does this job with creating zip file VI?  I use the vi path string.

  Thank you

  Hello Zener,

  Please contact National Instruments!  I've seen this error before when using the ZIP screws on a controller of the PSC.  Unfortunately, this error occurs because the ZIP screws are dependent on Windows and are not supported by the operating system in real time. We are working to make these changes to the range of functions in real time.  I'm sorry for the inconvenience.  If you do not need to use the ZIP screws, then you should be able to transfer the data to a host computer and then call the screw ZIP from here.  If you have other questions about this please just after them here and we will help you.  Have a great day!

• Runtime error 70 when trying to open files in the Office

  Original title: run-time error 70

  I get this error message whenever I try to open the files in the office. The files end up by open, but cannot open the subfolders of these folders. Even when you run the file as an administrator, do not open the subfolders. I tried everything to open the main folder as an administrator of the registry cleaning. I had my computer reformatted but only the C drive. Files were copied to drive D (which was not reformatted) on the desktop.

  Hi puzzledcommuter,

  ·         Did you do changes on the computer before the show?

  ·         What is the full error message?

  A runtime error is a software or hardware problem that prevents a program to function properly. Runtime errors could cause you to lose information in the file that you are using, causing errors in the file (corrupt the file) so that you cannot work with it, or prevent you from using a feature. Unlike stop errors, errors lead usually Windows or a program to stop working.

  Follow these methods.

  Method 1: Run the fixit of the article.

  Diagnose and repair Windows files and folders problems automatically

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Step 2: If the problem does not persist in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Reference: what is a runtime error?

• Error 0x8007045D when the Installation of Windows 7 Professional 64-bit

  I tried to reinstall windows 7 after installing my new mainboard Asus M5A97 THE R2.0, but the process stops at 1-2% and raises the 0x8007045D

  Error message. I quickly put in shape and repartitionated HARD drive. Still the same error. I tried again after formatting the HARD drive with partition wizard, low
  repartitionated once again, still getting error 0x8007045D.
  Also updated my bios, did chkdsk assistants / partition sector audit, which both say the HARD drive is fine, installed xubuntu and archlinux with no problem, reformatted and repartitioned once again, changed my SATA controller in the BIOS from AHCI to IDE, has released 1 RAM module, tried to win 7 64-bit Professional without SP1 and win 7 32 bit Prof. I ran the install disc in both UEFI and normal mode (of course with GPT table partition mode uefi and mbr in normal mode), tried to cables and SATA connectors, different and burnt and tried them all iso alone at least two times (with different programs).
  Installing Windows from USB Flash Drive also tried.
  I still get error 0x8007045D with each I try unique installation.
  System Specs:
  Motherboard: Asus M5A97 THE R2.0 with BIOS Version 1602
  Previous motherboard: Asrock N68C-S UCC
  RAM: 2x2gb DDR3 double channel 1333 MHz
  Graphics card: Gainward GeForce GTS 450 Nvidia
  HARD disk: Western Digital WDC WD10EALX-009BA0 1 TB
  CPU: AMD Athlon II X 4x3Ghz 4 640
  ODD: Optiarc DVD RW AD - 7260S
  Also interesting:
  When I try to erase the drive with diskpart after starting the installation disc, it also throws an IO error, but I don't know what to do about it.

  Wow, looks like you have almost tried everything to what is material.

  The cause for the error code is often a scratched or dirty facility...

  Since you've already tried to burn multiple ISOs, it could be your optical drive.

• Error 0x8007045D when copying to NAS

  Hello

  I recently created a NAS using NAS4Free. I formatted a hard drive and was copying on my files, however, once that works well for a few days it now gives me an error (see below) while trying to copy to a file. I tried to google the problem to find a solution, but I had no chance. Is that what I can do or is the hard drive (old) just died?
  "An unexpected error prevents you from copying the file. If you continue to receive this error, you can use the error code to search for help with this problem.
  "Error 0x8007045D: the request could not be preformed because of an i/o device error."
  Thanks for the help!

  Hi Chris_1989_A,

   

  Method-

  I wish you post your question in the TechNet Forums because it caters to an audience of it professionals.
  Check out the link-

  TechNet forums

  Hope this helps!

• Get an error message when download a m4a file in Vista Movie Maker

  Original title: I'm doing a filmmaker and it let me download music

  Im trying to download a m4a file and it used to work, I get an error message

  Im trying to download a m4a file and it used to work, I get an error message

  M4A is not supported by Windows Movie Maker.
  Google for a FREE audio converter. Convert m4a to wma or wav. Then reinsert in movie maker.
  Here is a link to one of the free Converter: AVS Audio Converter.
  http://www.AVS4YOU.com/AVS-audio-converter.aspx?type=GoogleAdWordsContent&gclid=CNKYucbuoqICFcl25Qodaw2Axg

  NOTE: There are many others on the web. Google for it and decide for yourself.

  t-4-2