Error 1600 SCXI 200329

Similar Questions

• Error 200320: SCXI-1001 Chassis - Mod 1502

  Hello.

  I'll put a SCXI-1001 chassis with several modules, 3 of them 1502 with their 1314 terminal blocks for the first time. I used this chassis before reading temperatures and worked fine, so I'm sure that the problem is me.

  I get this error 200320 on simultaneous sample and hold trying to acquire data of deformation, but I think that the configuration is fine. I'm still fairly new to LabView and have tried to check the installation by the Express data acquisition module and MAX; but I get the same result.

  Please help me to implement as soon as possible, I need your knowledge.

  Thank you

  usuario

  Hi user,

  You can learn the development of LabVIEW applications and data acquisition as shown in the following links:

  http://digital.NI.com/public.nsf/allkb/7D5F60ADBFD9CDC2862572BA005DD96A?OpenDocument

  http://zone.NI.com/DevZone/CDA/tut/p/ID/2835

  The latest links explains what a global virtual channel and a task.

  Regarding the shunt calibration, you can consult the following links:

  http://digital.NI.com/public.nsf/allkb/8D81F07FBCCB6DA186256BE6000691B3?OpenDocument

  http://digital.NI.com/public.nsf/allkb/286AC9A8DC0B689986256C2C0064B183?OpenDocument

  http://zone.NI.com/DevZone/CDA/tut/p/ID/3642

  You can open a new thread and forum to do not mix topics, that's my advice.

  Kind regards

  Jesus.

• pilots and SCXI?

  Hello

  I have a SCXI-1000 chassis, with a 1100 unit, a unit of 1520 scxi and a 1600 scxi. Now when I connect, I get only a "USB not recognize unit."

  I installed 9.1 OR DAQmx and LabVIEW 9.01 32bits, need more? I have never tried to use before SCXI.

  I got Windows7 64 bit.

  Thanks in advance.

  For these devices, it is not currently planned to add support for 64-bit operating systems.  This is due to incompatibilities between these older devices USB design and implementation of USB in 64-bit version of Windows.

  Kind regards

• Cannot restore iPod 1st generation ispw file

  Hello

  I am on windows 10 and could not restore iPod touch 1st generation no matter what ispw file. I received the error 1600 and error 20. I tried to restore in DFU mode and recovery. Is the files I've tried damaged in any way, my iPod or iTunes? I tried this on several versions of iTunes to see if older is my device supported better. Any help would be great!

  Do not try and download ipsw from anywhere otherwise than through iTunes. You don't know what you have found. Also, check out this document to support for your error codes. Get help with iOS update and restore errors - Apple Support

  error 1600 is an error of USB, but error 20 is a hardware error. You may not be able to recover from this one, however follow the troubleshooting steps in the support document and try. Otherwise, you will need to make an appointment at the Genius Bar to the nearest Apple Store for assistance.

• Problem with a digital output in the information of an analog input

  Hello

  I use a SCXI-1000DC module with a module of the SCXI-1600, SCXI-1531 module and SCXI-1163 module to receive an analog of an accelerometer signal and a digital signal.
  I claim that the accelerometer is constantly monitored, and the output is on when I want to, by an impulse that I comand in labview.
  I use a rate 25 k and a 12, 5K samples per channel on DAQmx Timing.

  I notice in DAQmx read, if I put a sample of hight by channel, the output is not there when I want to, and if I put a few samples per channel, I exit when I want to, but the program seems to be slow with the passage of time. I don't know how I can solve this problem!

  I'm sorry for my English, and I hope you can help me.

  Thank you

  Silvia

  Hello Silvia,.

  If you ask a larger number of samples, the labview diagram will stay longer in the DAQmx Read function, so the while loop runs slowly, and the digital output is updated less often.

  I suggest that you use 2 separate while loops: one for the analog input and the other for digital output, so that each loop might run at a different speed.

  Best regards

• Error - 10401 with the SCXI-1600

  Hi all

  I have a system of aquistion of data based on the SCXI-1600 and already work with LV6.1 software and I want it to be used with LV12 improve.

  When I tried to record data using MAX I have, it works very well. but trying to save data in labVIEW with function "I acquire waveforms", it gives me error attached 10401.

  can someone help me solve this problem?

  Thanks in advance,

  Ahmed Elsayed

  This function is part of the outdated traditional DAQ driver and your image shows DAQmx is active for the device. You should carry all your code to use DAQmx. DAQmx was introduced with LabVIEW 7. If you choose to stay with the outdated driver, you will need to do a reset and switch drivers, but assistance will be limited.

• SCXI-1600 drivers

  Just discovered that 64-bit to the scxi 1600 drivers do not exist.  Place a service call to see if they are working on it.   Is there a third-party driver that I can buy?  It's really ridiculous.  Must use a 32-bit computer to make it work.  Really disappointed.

  What I understand, the device is unique and the design is old and not recommended for new designs. You can also request support on the exchange of ideas, but I would not hold much hope, unfortunately.

• SCXI-1600 is not communicating with MAX

  All-

  Maybe that someone else has come across this.  I have connected an SCXI-1600 module in an SCXI-1000 chassis to a computer with a USB cable.  I can not get NOR-MAX to recognize the device.  I ' v tried to restart and reconnect in different orders.  I traded with a well-known USB cable.  I even took it on another computer.  On the new computer, when I plugged it first of all, I have a message "new hardware found" Windows (XP) that the-1600 had been identified, but I still couldn't it appears in the tree, even if I tried to add devices manually.  I removed the other modules in the chassis and reconnect the - 1600, still no luck.  Any advice would be great!  Thank you.

  Reinstall the suite OR-DAQ solved the problem.  Didn't try it before posting because I had the same problem on several computers and so I thought of something else.  Please do not take into account post.  Thank you.

• How to replace the SCXI-1600?

  Since our IT obliges us to switch to Win7, 64-bit edition, our SCXI-1600 becomes unnecessary because there is no 64 bit driver (Sidenote: the device is still available in the online catalog without obvious by the lack of such a driver warning). in an another tread on this subject, Seth_B advise

  For example, the USB-6251 device mass termination that provides 5 x faster sampling with 7 x better accuracy, USB 2.0 transfer speeds of data transfer more reliable and is only about $300 more including the cable between the DAQ hardware and the SCXI chassis.

  I need more information - I don't understand how exactly who will replace the SCXI-1600 as a connection to the SCXI block, for me, it looks like an ordinary e/s USB device must connect directly to several types of e/s analog and digital through a CBS. What cable should I connect the chassis SCXI containing other maps, how she will turn upward in MAX - in short: I need to decide if the replacement is more trouble with respect to particular software rewriting labview and other efforts that fight OUR guys to keep the System 32 bits for this testbed.

  Hello MBohnet,

  To avoid work or acquisition of new equipment on your part then I would recommend against your IT Department to maintain 32-bit system.

  If you need to upgrade to Windows 7 64 bit then the 6251 is an option at your disposal to communicate and scanning information of you modules SCXI.

  There are steps for setting this up

  1. Remove the 1600 chassis.
  2. Fix a module SCXI-1349 in the back one of the SCXI modules. Then use an SH68-68-EPM cable (the cable is listed on the pricing for the device 6251 tab) to connect the SCXI-1349 module to the PCI-6251.
  3. Your configuration in Measurement & Automation Explorer would be alike in what concerns the addition of your device, but you will point to the 6251 as the digitizer.
  4. The quote above regarding the (5 x faster sampling rate) applies only when using the USB-6251 in parallel mode.
  5. You wouldn't have to make changes to code with switching on the material element.
  6. Also, if you are not connected to the USB take a look at the PCIe-6320 or PCIe-6341 with the SHC-68-68-EPM cable. They are less expensive than the USB-6251 housing alternatives.

  Kind regards

  Izzy O.

  Technical sales engineer

  National Instruments

  www.NI.com/support

• SCXI-1600 vs term of mass OR-6251 (SCXI-1000 chassis)

  I just need a mental health check using an SCXI-1600 instead of a NOR-6251 module.

  I have a SCXI-1000 chassis with 3 cards: (w/1300) module SCXI-1100, SCXI-1104 (w/1300) and SCXI-1126 (w/1327)

  I'm sampling 62 channels of these cards to 1200 samples per second, using LabVIEW 2011 on Win 7 (32 bit).

  We previously had a PCI-6040E to connect to the chassis, but we must move on to a USB interface.  I tried the 6251, but we have serious space and mounting issues since that a portable Setup.  I would use one SCXI-1600 module instead, but I'm afraid of all the severe warnings recommending a 6251 instead.  Are there problems I'll meet?  This seems to be such a basic configuration.

  The 1600 allows me to save space the 6251, its power supply and cable 68 pin linking the two.

  Hi CoryM,

  Since you are using Win 7 (32 bit), I plan no compatibility problems. We strongly encourage our customers to use the 6251 because it is a new product with more features, but if you need the SCXI-1600, that should be good as well. I hope this helps!

  Carisa - L.

• PCI-MIO-16-4 error 200329 after running a while

  I use a card PCI-MIO-16-4 for a combination signal generator and an oscilloscope for a student laboratory exercise.  I use ao0 to generate a variable frequency waveform (defined by the controls on the front panel) and ai6 to acquire the resulting signal.  To experience the two must be synchronized for the acquisition of scope starts simultaneously with the beginning of a generation analog.  Synchronization is performed using ctr0 in generation mode and set the same frequency as the analog output.  The meter output through rtsi0 for relaxation of beginning on the analog input.

  The application seems to work very well until the output frequency is changed "too quickly" while the analog input section will post 200329-error of the vi DAXmx Start Task.  After receiving this error, the computer must be restarted to resume operation of the Commission - even MAX panels will be simply repeat the same mistake on the analog inputs up to a reboot.

  If have tried the application on a Board of the USB-6221 BNC (using pfi9 to route the trigger start signal) and were unable to make the same error.

  It is on a computer running window 7 Enterprise sp1 with LabVIEW 2012 (32-bit) sp1 with the f5 patch installed.  DAQmx 9.6.2 has been installed for the original tests for both cards.  Installation DAQmx 9.8.0f0 does not change the behavior.  The PCI-MIO-16-4 passed the tests of the DAQ Diagnostic Utility 2.1.

  I tried using rtsi6 and rtsi0 as the routing without behavior change trigger signal.

  I have attached a stripped down version of the application that is always the problem.  There are 7 required files so that they are in a single .zip file.  With the frequency setting knob, it takes usually just a couple of "twists and turns" on the controller to cause the entry to the analog error.  The output of the DAQ Diagnostic Utility is also attached.

  Thanks for advice on what I can hurt in this application.

  The solution to the error:

  First attempt, the application had two structures of parallel events that have allowed the frequency be changed while there was also an acquisition that occur.  Modified to have a structure of single event so that the frequency changes may occur between acquisitions (risk of conflict Access Board?).  This made no difference to the error.  He would always get error-200329 after that the frequency has been changed several times.

  Discovered that just reset the jury would clear the error.  Considered catch the error and reset the jury whenever it happened.  Prefer something that will prevent the error from happening at all.

  Final solution was to erase the data acquisition task after each acquisition scan and reset.  It was only necessary erase the tasks of acquisition and not production jobs or a timer.  After several hours of change of frequency, amplitude and phase, no error had occurred.  I think that it has cured the problem.

  I now have two different copies of the application.  One is for use with the PCI-MIO-16-4 (new one that clears the task of acquisition after every scan) and one for use with the NI USB-6221, who uses still two parallel event structures, does never erase the task of acquiring and never shows the error when it is used with anything other than the PCI-MIO-16-4.

• Reading data SCXI-1600

  Hi Experts,

  I'm new to this interface SCXI. Kindly help me in the framework

  I'm developing an application that will be using the SCXI-1125 and SCXI-1600 controller module. In the application, I want to allow the user to configure the different tasks in the front panel.

  What are the necessary controls in the front panel to allow the user to configure the task

  How to read the data of the SCXI-1600,

  How to differentiate the eight channel data from 1125 SCXI thro SCXI-1600

  Thanks in advance

  True, you can't simulate the SCXI-1600. This means that you will not be able to run your code without the hardware. For simulation purposes, you can, however, use another device that would work in the same way for the SCXI-1600 in terms of triggering, resolution and the frequency of sampling.

  In regard to programming, would use it DAQmx as I'd mentioned. There is no specific examples for the SCXI-1600, but you really do not need them. The SCXI-1600 is basically a data acquisition module, which is located in a SCXI format with a USB connection. Your software is concerned, you will use DAQmx to read data from it. Then, take a look at DAQmx examples as data on data acquisition devices.

  Your task will define how many channels you will read. Since you are reading a mixture of measures (temperature, pressure and tension may be simple), you will need to decide whether to create separate tasks for each of these measures that are configured to be specific to this type of measure, or to create a task that reads simply all channels not adjusted values (i.e. raw tensions) and then put you in the scale of values in your code. If you open the example Finder and navigate through the input and output hardware tree-> DAQmx-> Analog measures you will see different categories for types of measure. Many of them have graphics.

  If you have not already done so, you can start here: http://zone.ni.com/devzone/cda/tut/p/id/3116

• Color LaserJet 1600: print error for Color LaserJet 1600 not solved with troubleshooting or relocation attempt

  I get an 'impression' error when trying to print any document. Have used the convenience store, who said that a print job has been blocked and that the authorized troubleshooter. Second attempt, same result. Attempt to uninstall printer but had received "implemented encountered abnormal program execution. Implementation will stop. "The next window: your printer may have been incorrectly installed, try to reinstall with the recommended settings. Got it but no change. Try "add/repair" printer with no solution. INFO: Color LaserJet 1600, PN # CB373A, Windows 7 Home Premium

  Hi Brenda6,

  When you reinstall the printer helps reinstall you by plugging the USB of the computer? Or are you downloading from the HP site? I recommend that you disconnect the printer from your computer by unplugging the USB or disconnect the connection without wire and then go to the HP support for HP Color LaserJet 1600 printer. Find your printer driver and reinstall.

  I hope this helps!

• HP PSC 1600: "Remove and check right cartridge" Error Message

  First had error message with a reremplie cartridge.  Could not see something wrong and could not erase message so bought a new cartridge.  It worked once or twice, now have the same message.  I have removed and replaced several times without success.   What I'm looking for? Have turned off printer for days, but when lit, same message comes.  I can't wait to go buy a cartridge if the same thing will happen.

  This document explains How to fix the errors of rejection cartridge with the printer. If after completing the document, you still have the same error, the printer must be replaced. You can contact the HP Support by clicking here and filling out the form below to see what options are available.

  Please let me know the results after following the above.

• When you use Firefox - loging in Yahoo mail - see account but then get error page said I less than 1024xx600 resolution - have new computer and set at 1600 x 900, cleared out background etc. but does the same thing - can connect w/chrome, but not firefox

  I don't know what else to say

  This can happen if you zoom in Yahoo mail websites.
  
  Yahoo uses a script to check the dimensions of the screen and zoom in a page affects the parameters width and height window and screen.

  Reset the zoom of page on pages that are causing problems.

  • View > Zoom > reset (Ctrl + 0 (zero); Cmd + 0 on Mac)
  • http://KB.mozillazine.org/Zoom_text_of_web_pages