Similar Questions

• OSStatus error = - 5000

  I am trying to build a disk image in CS6 again, but everytime I try, it gives me the error message "error OSStatus = - 5000". I searched and found other errors "OSStatus", but not this one. Does anyone have an idea why I would get this and how to fix it? It is a time sensitive issue, so I'd really appreciate any input.

  Thank you!

  Ah, nevermind! I thought of it on my own, haha. However, I'll leave this message for everyone who may have this problem. The solution is that I tried to build the disc image on an external drive. Apparently, you are not allowed to do. Which makes sense. Its fair. In any case, I hope this helps someone.

  Note: If anyone cares to explain why you are unable to do, be interested to know

• Error 5000: The class 'Particle' must subclass 'flash.display.MovieClip' because it is linked to a symbol in the library of this type.

  Running Flash CS3, I looked at the tutorial from lynda.com on strengthening the systems of particles in ActionScript 3.0 to create a few sparks shooting in an animation.  I'm stuck to what I think is a point really basic, but I can't seem to cross it.  Basically, all I'm doing at this point is to create a class called particle (that I'll learn to do things that the particles to make a little later) bind it to a MovieClip on the stage in my .fla file and use the function to update the particle to move it around the stage in a way defined in the instance (so I can later give properties of different movement to) each as an instance generated the MC).  I know there are easier ways to accomplish my basic task without loading an external module, but this seems to makes it so I have to hurt something very simple, that I can't see so I thought I'd post the code here and see what I'm missing.

  I start with a file called Particle.as in the same folder as my file Test.fla Spark.

  In Particle.as, I have the following code:

  package
  {
  import flash.display. *;
  
  Particles/public class extends MovieClip
  {
  public xVelocity:Number;
  public yVelocity:Number;
  
  public void Particle()
  {
  xVelocity = 0;
  yVelocity = 0;
  }
  
  public void update (): void
  {
  This.x += xVelocity;
  This.y += yVelocity.
  
  }
  }
  }

  So, I declare that all the particles are built with no movement, but if they are explicitly granted an x or y velocity, they will pass by there a lot when updating the instance function is called in the timeline panel.

  Then in my file Test.fla spark, I have a small shape in a MovieClip called Spark.  In the properties of binding of spark, I chose to export for ActionScript and export in first frame.  The class is called Spark and the Base class is the particle.  For testing purposes, I dropped an instance on the stage and called spark.  Then in the layer actions in the first image (the timeline is just the spark layer and the layer actions, a long frame each with no "stop();" so it should run forever), I have included the following code:

  spark.xVelocity = 5;
  spark.yVelocity = - 1;

  function updateSpark(event:Event):void
  {
  Spark.Update ();
  }

  addEventListener (Event.ENTER_FRAME, updateSpark);

  Is what it seems that this should be on every Flash ENTER_FRAME should call updateSpark, which is a function that handles the event update() for the instance of the spark which is a movieclip instance that has an update event that moves x and y of the position of their relative velocity variables.  It seems simple enough to me, but when I ctrl-enter to test the movie, I get the following compiler 3 errors:

  Particle.As line 1: 5000: the class 'Particle' must subclass 'flash.display.MovieClip' because it is linked to a symbol in the library of this type.

  Particle.As line 7:1071: syntax error: expected a keyword (for example function definition) after the public attribute, not xVelocity.

  Particle.As line 7:1084: Syntax error: expecting rightbrace before the semicolon.

  Since I imported flash.display. * and declares the class public particle so it extends MovieClip I have no idea why I get this error of 5000.  I see this issue come up a lot when searching Google and forums, but none of the resolutions that I could find have suggested an approach that applies to me or solve the problem.

  Any help to fix this would be appreciated.  I enclose a zip of the FLA a files as described above in case there is something in the settings of publication that I messed up inadvertently.  In addition, if you can get this to compile without error, then the problem may be due to my Flash CS3 Pro install which will result in the problem isn't with my code and start looking at me in a different direction.

  Thank you

  Scott

  Yes, 'var '.

• In the iTunes application, which means error (-5000) and is there a fix... attempt to sync ipod

  Attempt to synchronize iPod and nothing is synchronization

  Hi WoodySB,

  Thanks for posting in Microsoft Communities. The problem description, I understand that you are unable to sync iPod with the iTunes App. provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         He has already worked?

  ·         What is the full error message?

  Follow these methods.

  Method 1: Uninstall and reinstall the iTunes application.

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  For more information, please see this article.

  iTunes: Possible iTunes Store errors

  If the problem persists, contact Apple support for help and additional information.

  http://support.Apple.com/kb/HE57

  Thank you.

• Try to download already bought the hardware, I get the error 5105 and 5113

  Hi all

  I bought an album in store for listening offline about 8 months ago. However, my USB backup broke down (where I had stored a copy). I wanted to download the album once again (on PC, Windows, through account > purchases > library, album was here with the cloud of download bit in a corner), but when I clicked on the download button, I got error 5105. Can someone tell me what this means and how I can fix this problem?

  In addition, the album is still present in my library, but it is not getting synced on my iPod (iPod Shuffle, 2 GB 1.0.3), or I can't play. I either get the message that I need to connect to Apple music to listen to it (which I am already at this stage, it should be available both offline) or I get error code 5113. Help?

  I had Windows 10 & latest version of iTunes (12.4.3.1). Not very well what to do now.

  These threads can help:

  Latest version of iTunes present error 5105

  If you see error - 5000, - 69, 13010, or 13014 when you synchronize the music in iTunes - Apple Support

• synchronization session could start the ios 10.02

  Can someone help me out here?

  I restored my phone 2 times and yet I see the same error message. "" sync session could start "I can't drag and drop songs

  Hi there tarakfrombangalore,

  Thank you for bringing your question about the issues you are experiencing syncing your iPhone to iTunes for the Community Support from Apple.  It is super convenient to sync your favorite songs on your iPhone and it does not work can get in the way that for sure.  I'm happy to help you today.

  This article refers to the various errors that you encounter, but it has some good tips:

  If you see error - 5000, - 69 and 13010 13014 when you synchronize the music in iTunes

  Best wishes!

• Used to synchronize some songs!

  When I sync all my music on my iPhone and it shows that all my music is synchronized, yet some of the songs do not show... for example, any song of Sting will not be displayed on my phone even though it is synchronized on my iPhone when I check through the computer! I can only find the song if I search by name, but it will not appear on the section artist, album or song so if im surfing for what I want to hear, I'm not going to find it. I even tried with my old iPod classic and get the same problem!

  And Yes, any music that is not displayed is bought on iTunes.

  Hello faysalals,

  I understand that, although it seems to sync, music that you tried to synchronize your iPhone and iPod seems to be synchronization on without all the metadata. While the title of the article in the link below may cause it to appear irrelevant, the detailed steps it contains can help restore your ability to properly synchronize all your music.

  If you see error - 5000, - 69 and 13010 13014 when you synchronize the music in iTunes
  https://support.Apple.com/en-us/HT205922

• Vise to install 1008:9,-5000 access denied error installation Vocalizer for Logic 9

  I get the error:

  1008:9,-5000 access denied error

  As I am installing of Sonivox Vocalizer. It is a plugin for Logic 9.

  I traced down on the threads here that it's a common problem with the vise Installer application that many use to install their software, so they do not install for the same reason. Apparently the cause of changes in security in mac OS.

  How manually set privileges TEMPORARILY so that I can get this software to be installed from the installation disc?

  P.S. I already do not clean install (only admin), updated, then disk utility used to repair permissions and that it was not fixed.

  The system version: OS X 10.9.5 (13F1712)

  Kernel version: Darwin 13.4.0

  Model name: MacBook Pro

  Model identifier: MacBookPro11, 3

  Processor name: Intel Core i7

  Processor speed: 2.8 GHz

  Number of processors: 1

  Total number of Cores: 4

  (By heart) L2 Cache: 256 KB

  L3 Cache: 6 MB

  Memory: 16 GB

  Only suggestion I've seen who could work is to understand what files they are manually and selectively instal time machine. Don't know what files choose so what makes a very hit or miss solution and I would rather understand how to change the permissions.

  Emailed to Sonivox support more than a week: no answer, so I post here.

  Model name: MacBook P

  L3 Cache: 6 MB

  Memory: 16 GB

  Reset user - file property See post by Linc Davis

  You may need to restore the permissions on your user account. To do this, start on your recovery partition (hold down the command and R during startup) and open Terminal from the Utilities menu. In the Terminal, type: 'resetpassword' (without the), press return, and then select the admin user. You do not have to reset your password. Click the icon of your Mac hard drive at the top. In the list box below, select the user account that has problems. At the bottom of the window, you will see a box labeled restore Home Directory permissions and ACLs. Click the button to reset there. The process takes a few minutes. When you're finished, restart.

  Fix the permissions of the user

• DesignJet 5000 'CHANGE printhead 2516' customer error said

  On a DJ, customer 5000 (sold the plotter to him a week ago) has used a printhead light cyan #83 for a week. Now says he gets 'CHANGE printheads 2516' error (it may indicate more precisely "replace 2516", but not sure "). Before use, the print head has been sitting 2 years however not sealed with masking tape on the nozzles and only had 17 ml shot from there. I installed and was surprised to see that it seemed to work very well and has about 1 1/2 weeks. I noticed that it weighed about 2-3 grams less than the other print heads (about 35.2 gm while others weigh about 37, 5-38 + gm or two, but it seemed to work fine.) I have purged the tubes until I installed print heads. All others are new.

  I am aware that the relocation and cleanup can possibly contact may be in order, but wonder if I am missing other opportunities that may be obvious to others.

  Thank you.

  Paul

  Hello

  If you clean the print head and still does not ink, you may have to replace it.

  Other cases, I have seen defective cartridges or tubes providing no ink in the print head causes this problem. I hope this isn't the case.

  Best regards

  Mike G

• My computer crashes. Find "MPSampleSubmission error (event ID: 5000)" in Event Viewer.

  Hi all..

  I found my PC always hang...

  I always need to restart the PC, and able to operate back then...

  blocking problem is interminted...

  I couldn't estimate when going to breed to hang...

  then I found that there my event log, have many error message as below show...

  Event type: error
  Event source: MPSampleSubmission
  Event category: no
  Event ID: 5000
  Date: 23/08/2011
  Time: 14:50:48
  User: n/a
  Computer: VISION-1
  Description:
  The description for event ID (5000) in Source (MPSampleSubmission) cannot be found. The local computer may not have the information necessary registry or message DLL files to display messages from a remote computer. You may be able to use the option/auxsource = flag to retrieve this description; For more information, see Help and Support. The following information is part of the event: mptelemetry, 8024402C, endsearch, search, 2.1.6805.0, mpsigdwn.dll, 2.1.6805.0, antimalware from microsoft (bcf43643-a118-4432-aede-d861fcbcfcde), ZERO, ZERO, ZERO.
  Data:
  0000: 00 70 00 74 00 65 00 m.p.t.e 6 d.
  0008: 6 00 65 00 6 c 00 65 00 l.e.m.e d.
  0010: 74 00 72 00 79 00 2 c 00 t.r.y.,.
  0018: 20 00 38 00 30 00 32 00.8.0.2.
  0020: 34 00 34 00 30 00 32 00 4.4.0.2.
  0028: 63 00 00 20 00 65 00 2 c c.,. . e.
  0030: 6F 00 64 00 73 00 65 00 n.d.s.e.
  0038: 61 00 72 00 63 00 68 00 a.r.c.h.
  0040: 2 C 00 20 00 73 00 65 00. . OS.
  0048: 61 00 72 00 63 00 68 00 a.r.c.h.
  2nd 0050: 00 20 00 32 00 00 2 c,. .2...
  2nd 00 00 36 00 38 00 1 0058:31... 6.8.
  0060: 30 00 35 00 2nd 00 30 00 0.5... 0.
  0068: 2 c 00 20 00 6 d 00 70 00. . m.p.
  0070: 73 00 69 00 67 00 64 00 s.i.g.d.
  0078:77 00 6F 00 2nd 00 64 00 w.n.... d.
  0080: 6 c 00 6 c 00 2 c 00 20 00 l.l.. .
  0088:32 00 2e 00 31 00 2nd 00 2... 1...
  0090: 36 00 38 00 30 00 35 00 6.8.0.5.
  0098: 2nd 00 30 00 2 c 00 20 00... 0,. .
  00 a 0: 6 d 00 69 00 63 00 72 00 m.i.c.r.
  00a 8: 6f 00 73 00 6f 00 66 00 o.s.o.f.
  00b 0: 74 00 20 00 61 00 6F 00 t... a.n.
  00b 8: 74 00 69 00 6 d 00 61 00 t.i.m.a.
  00C 0: l.w.a.r. 6 c 00 77 00 61 00 72 00
  00C 8: 65 00 20 00 28 00 62 00 e... (. b.
  00D 0: 63 00 66 00 34 00 33 00 c.f.4.3.
  00D 8:36 00 34 00 33 00 - 6.4.3 00 2d.
  00e0: 61 00 31 00 31 00 38 00 a.1.1.8.
  00E8: 2d 00 34 00 34 00 33 00 -.4.4.3.
  00f0: 32 00 2d 00 61 00 65 00 2.-. a.e..
  00f8: 64 00 65 00 2d 00 64 00. d.e - .d.
  0100: 38 00 36 00 31 00 66 00 8.6.1.f.
  0108: 63 00 62 00 63 00 66 00 c.b.c.f.
  (0110: 63 00 64 00 65 00 29 00 c).
  0118: 00 20 00 2 c 4th 00 49 00,. . N.I.
  0120: 4 c 00 2 c 00 20 00 4 00 L.,. . N.
  0128:49 00 4 c 00 20 00 4e 00 I.L.. N.
  0130:49 00 4 c 00 0D 00 0 to 00 IL...

  Can someone let me know what it is... ??

  is it cause my PC always locks... ??

  Please advice...

  Thank you..

  Hi sookchan,

  ·         Have you checked the problem in safe mode?

  This event is generated when the client Forefront Endpoint Protection (FEP) cannot get updates from Windows Server Update Services (WSUS) or the Internet. This problem may be caused by the WinHTTP proxy settings.

  You can see the B method among the Advanced troubleshooting methods in this article.

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

• My computer says that it has more than 5000 errors and I have to pay to fix them.

  My computer shows that I have more than 5000 errors... I download 'Free'... but after showing how many mistakes I have... so I have to buy remove them... Anything FREE available to remove these errors with?

  original title: maintenance cleaning disc my computer reports that I have more than 5000 errors

  You may be victim of scare ware by malicious registry, cleaning of retail sites.

  In addition, it is unclear if when you run an analysis, the downloaded site ware hostage on your system.

  Try running a system restore point to restore the hive of the registry to a functional State before you run the malware analysis.

  Thereafter, be sure to run a full scan with your anti virus program.

  However update your antivirus with the lates virus definitions since the system restore may have restored an old list of virus definitions.

  If everything looks correct and normal now, then install and run inoculate, then "spybot" your system.

  It will update your windows with a list of bad sites to avoid.

  and don't forget to update and run spybot regularly.

• Error: LifeCam.exe - the exception unknown software exception (0xe0434f4d) occurred in the application at location 0x7c812afb when trying to install Microsoft Lifecam HD-5000

  Original title: application with microsoft lifecam hd-5000 error.  My operating system is XP Sp3.

  I tried to download it from the microsoft site and I have the same problem.  After installation, I click on the lifecam 5000 and I get the following message:

  "LifeCam.exe - the exception unknown software exception (0xe0434f4d) occurred in the application at location 0x7c812afb.

  If I anwser or not it then closes.  How can I fix this problem?

  Hi ChristopherBell,

  I recommend contacting Microsoft Hardware support for assistance.

  
  Reference: Troubleshooting

  Hope the helps of information.

• Cannot install LifeCam HD-5000 on Windows XP - error "Setup cannot continue because an unexpected error has occurred."

  Original title: 953691

  Installation of webcam LifeCam HD-5000. I'm on Windows XP and you get to halfway through the installation and error message came through. Three times so far.

  Error message reads

  The installation cannot continue because an unexpected error has occurred

  http / / microsoft.com//kb/953691 support

  Any suggestions?

  Hello

  ·        Have you tried the steps mentioned in the article KB 953691?

  ·        What service pack is installed on your Windows XP system and version, 32-bit or 64-bit, what has?

  If you have not tried the steps mentioned in the article then, I suggest you try the steps and let know us if the problem is solved or not.

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

  http://support.Microsoft.com/kb/953691

  If you use Windows XP 64-bit, then the LifeCam HD-5000 is not compatible.

  http://www.Microsoft.com/hardware/digitalcommunication/ProductDetails.aspx?pid=019&active_tab=systemRequirements

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Microsolf lifeCam VX-5000 gives an error

  I just put on Microsoft LifecamVX-5000, it starts and then an error message comes from Microsoft saying that LifeCam .exe has encountered a problem and needs to close. I have unstahll and then put it on again and again. I check had everything, even a race and it's not red flag, I am running Xp and have updated my updates.
  Thank you

  Hello joylinky,

  Go to the website for Lifecam and download the last software update to get the latest drivers.

  http://www.Microsoft.com/hardware/download/DownloadResult.aspx?category=ice&type=LifeCam&name=RKA-00001&OS=XPSP2x64&lang=en

  I hope this helps.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Error message: Microsoft HD-5000 is not in need. INF installation Webcam

  Webcam installation problems

  Hello

  I am trying to install a webcam on my Windows Vista Home Premium 32 bit. I think I should also mention that I bought this laptop from a friend, a year or two ago, and I decided to reformat it for Windows Vista Home Premium a month ago. Back to the problem. I load the installation disc and everything installs until the time of the pilot. When it starts to install the driver, it encounters an error. He said to me (as for example Microsoft HD-5000 webcam) "Microsoft HD-5000 is not in need. INF' or something in that sense. This message has jumped to 3 different webcams I tried to install. I even went further and purchased the HD-6000 for notebooks and still does not work.

  -J' have tried going to the manufacturer's website and install the latest version of the software and still the same problem.

  -J' also tried to go to Device Manager and trying to update the driver. and still the same message.

  -J' even tried to find the driver I install and same thing.

  Someone help me please install this webcam! I try to webcam friend which is 800 miles!

  Please someone HELP!

  Hi Kosh Vorlon,

  1. What is the version of the operating system installed on your computer (32 or 64 bit)?

  2. have you checked the webcam on another Windows Vista computer?

  3. you get error codes?

  Step 1: First of all, try to check the webcam on another computer and check if it works.

  Step 2: You can also try a create a new user account and check if you can connect:

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.