HP Probook s 4710 can't overclock. (Cannot acess BIOS settings)

Similar Questions

• Error Cpu fan failure cannot Acess Bios Compaq Presario SR1315CL Help!

  I wanted to upgrade the processor. I have 2 extra cpu a Sempron 2500 + and an Athlon 64 3200 +.

  I asked for advice on the card of another (wrong place, laptops), but got some good advice.

  I decided to try the Athlon 64. After having removed the radiator and the fan and replace the cpu,

  I get the ERROR: CPU Fan has failed! PC will turn off automatically in a few seconds.

  PC service immediately to avoid damage to the PC.

  I tried the Sempron, same thing.

  I made sure that all the connections are good. The fan turned by the way... Works very well.

  I studied the error and and found advice to enter the bios by pressing F1 and adjustment

  the bios with the default settings. I can't get into the bios. I pressed on, F1, Del, and F10. F2 will enable

  to continue to start. The processor is listed as unknown to the station.

  So how can I access the Bios? I kill the PC?

  N ° you should have cleared CMOS before installing the CPU. The voltage and FSB settings are different on the Athlon 64.

  Remove CMOS battery and set the clear CMOS in position 2-3 then press and hold the power button to @15 seconds or more.

  Reinstall the original CPU back in to check that all is well.

  If all is well then update your BIOS to the most recent available such that he would have supported for processors more. The link is to the latest BIOS for your motherboard from the PC.

  Clear CMOS again, and then reinstall the Athlon64

• Cannot Acess BIOS / Boot from a USB

  Hello

  I wanted to install the new Windows 8 version overview with a USB key, but can not start when the computer starts, I tried pressing esc,

  F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 even or remove but nothing happens, it just boot windows 7

  Can someone help me please?

  I run windows 7 32-bit

  HP Pavilion Notebook PC g6

  Thank you

  Hello

  Try the following.

  With the phone off, remove the USB key.  Press the Power button and immediately after, press on and hold the ESC key - if it launches the start menu?  If so, you should see the option to select the boot device (often f9 to display the start menu).

  Kind regards

  DP - K

• Cannot access BIOS for Sony Vaio VPCEH25EN

  Hello to all members of the community...

  Well, I have here the computer sony vaio laptop VPCEH25EN I tried evrerthing watched several videos...

  but I can't get into the BIOS settings...

  tried every combination of keys f1 to f12 alt del and help button but I cannot get into the BIOS menu...

  I think that the bios is locked actually, I want to install windows 32 bit currently there windows 7 64 bit...

  I also installed winbcd and tried to boot from usb it but it says no operating system found that the USB is DΘmarrer on my other laptop and desktop...

  the assist button does not have the option in the BIOS it has just 3 options...

  Start the recovery Wirard

  Tools

  Output...

  even more, I installed windows 10 64-bit on it and reboot into recovery of advance and there is no option to disable UEFI...

  Please tell me how to access bios on this laptop...

  I finally fixed it... Sony is a lame!

• HP ProBook s 4710: Bluetooth missing on HP ProBook 4710 s (Windows 7 64-bit) - Intel WiFi - Link 5100 AGN

  Hello

  I have a strange problem:

  I have two HP ProBook s 4710 here in front of me. The two "seems" to have the same hardware inside (I don't see any difference on the stickers in the back).

  I have install both of them with the same USB with Windows 7N 64-bit.

  After the installation is complete (no additional driver installed).

  the first bluetooth ProBook has

  the second bluetooth ProBook has NO!

  I checked the BIOS, every two active a bluetooth settings on both.

  WLAN works on both.

  On the first s I can also install the bluetooth drivers latest, on the second, I can't. Always the message occurred ("no device was detected. Make sure that... »).

  Device Manager indicates, the two ProBooks Intel WiFi - Link 5100 AGN, the first s also Bluetooth-device listed, the second of not.

  What the hell is going on here?

  Hello:

  It is very strange because the HP Wireless Assistant software is registered directly on the support page and driver 4710 under the solutions section.

  If this is the case, try the latest HP Connection Manager software which does the same thing the software assistant wireless.

  Here's the theory behind your dilemma (except radio BT died).

  This laptop once had the connection manager (since the software assistant Wireless does not) installed, and you can use this software to individually disable bluetooth or devices rather than using the wireless button wireless.

  I guess that for example, turn off the stereo bluetooth with the connection manager to save a small amount of battery power, which increases the time before having to recharge the battery.  But you can still use the wireless.

  The hardware button turns both off the coast.

  The big problem is...

  If none of these devices are turned off by the wireless assistant or the connection manager software and that you reinstall the operating system or to update or other, wireless or bluetooth devices do not appear in the Manager of devices as if they are dead or don't exist.

  And what makes this more puzzled, is that if you check the BIOS, you will see that they are present and active!

  The only way to make them work again, is to turn them on by using the Deputy Director or the wireless connection software.

  This is why it is absolutely essential to ensure that these devices have been turned on before you reinstall the operating system.

  For those people that upgrading to W10, none of these programs work on W10, so if the BT has been disabled, the user must return to W7, activate the bluetooth, uninstall the connection manager or the wireless assistant software, reboot, ensure that the device is always on and then upgrade to W10.

  Here is the link to the software of the support page for your laptop connection manager...

  FTP://ftp.HP.com/pub/SoftPaq/sp53001-53500/sp53394.exe

  If this doesn't work or the other, I suspect that the BT module does not work (all hardware failures).

• Increase the ram on my Probook s 4710.

  I'm looking to upgrade the ram on my Probook s 4710. When I look to the top of the record number VA024PA #ABG it says it can use DDR2 or DDR3. See http://h20195.www2.hp.com/V2/GetPDF.aspx/c01722937.pdf

  This doesn't sound right. I ran a program called CPU - Z and it says I have 2 x 2048 Mb DDR2 modules installed.

  Is it possible to use DDR3 RAM in this notebook?

  In addition, why my system properties shows that I have 2.96 GB or RAM?

  Thanking you in advance. John

  DDR3 is cheaper and faster, but the modules are different, so they don't go in your laptop. You should be able to run 8 gigs but 4 gig DDR2 modules are always expensive prety and I doubt that the upgrade would do a lot for you. You have 3 gigs usable due to the use of the video and also you probably have a 32-bit operating system. If you were going to try to run 8 GB, you must install 64-bit.

• can send but cannot receive messages on ipad with IOS new 9.3.2 waves I

  can send but cannot receive messages on ipad with IOS new 9.3.2 waves I

  1. make sure that the information entered in the transmission & reception area in settings - Messages is correct

  2. If so - settings - Messages - switch off

  Log settings - iCloud

  Do a forced reboot - after all open applications using the app Chooser - invoked by fast double pressing the home button and drag upwards on each app until it disappears from the screen.

  Meet the sleep/wake and home buttons down until you see the logo  - then release and allow normal start upward

  If you can't send or receive messages on your iPhone, iPad or iPod touch

• HP envy model m6k022dx: How can I overclock my laptop so that it will not overheat?

  My specs are:

  Summary
          Operating System
              Windows 10 Home 64-bit
          CPU
              AMD A4/A6/A8/A10    111 °C
              Richland 32nm Technology
          RAM
              6.00GB Dual-Channel DDR3 @ 672MHz (9-9-10-24)
          Motherboard
              Hewlett-Packard 1995 (Socket FT1)
          Graphics
              Generic PnP Monitor (1366x768@60Hz)
              768MB ATI AMD Radeon HD 8610G (HP)  57 °C
          Storage
              698GB Hitachi HGST HTS541075A9E680 SATA Disk Device (SATA)  35 °C
          Optical Drives
              No optical disk drives detected
          Audio
              Razer Surround Audio Controller
  

  I wonder what is a safe level of overclock my CPU or GPU and if it is still possible with my model.

  Hello

  No, you can't overclock your machine without breaking its BIOS and it's a big risk because it was blocked. I don't know how to break it and if I knew I wouldn't have you.

  Kind regards.

• I can see, but cannot import/open some files.

  I bought Lightroom 6 a few weeks ago. Summer helping another photographer to edit and she a LR5, beloved. I was editing wedding photos and doing great, until I arrived at the reception. I have a few folders of them since a couple of times, I changed the SD cards. On the first record of them, I can click/Open the first 42 photos, and then the rest I can see but cannot click. What could be the problem? Thank you!

  What do you mean by "do not click on '?

  You see the pictures in the import?

  You import directly from the camera?

  Have you tried another way to import (i.e. the copy on the desktop with the browser and import from there?

  What is the file type and the source (camera), your operating system?

• Cannot access pc settings and can not unlock the taskbar? (Windows 8)

  This morning I turned on my pc and noticed that the lock screen had changed, so I logged in and then I realized all my apps on the home screen had been removed even those provided with windows 8, such as news and sports, even the tile Office had gone. I finally managed to get on the desktop and everything blew my taskbar, so I tried to unlock it, but whenever I did it automatically locked again. Then, I found refreshing the pc would be a good idea, but I can't even on the pc settings. I opened to the top of the sidebar, then click on change pc settings, but absolutely nothing happens, can someone please help soon!

  Hello

  Thanks for the reply.

  I appreciate your efforts to solve the problem.

  I suggest you to check if the problem occurs in a new user account.

  Create a user account
  http://Windows.Microsoft.com/en-us/Windows-8/create-user-account

  If the problem does not exist in the new user account, you have damaged user profile. You can follow the procedure to resolve a corrupted profile.

  Copy old files to the new profile:

  a. go to C:\Users\Corrupted_Profile_Name\. The name of the profile will be the corrupted ProfileName.

  b. copyall files.

  c. Open Panel and the display of folder options uncheck Hide protected operating system files.

  d. navigate to C:\Users\Corrupted_Profile_Name and copy the Appdata folder.

  Note: Do not copy these three files. NtUser.dat, NtUser.ini, NtUser.log.

  e. navigateto C:\Users\New_Profile_Name\.

  f. Paste all files here.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Satellite Pro A300-1LG - cannot enter the BIOS settings

  For some time when I turn the notebook on the page where it appears the Toshiba logo are not displayed and I can't get into the BIOS.

  And put back two or three times and then reappear details.

  I tried to reinstall the BIOS, but the BIOS installation tells me that the version I installed is the existing one.

  Do you have any suggestions?

  + The message was edited: assignment has been translated.

  *@manona*
  Please post in English. This is a user to user community where the English language is required!

  (* 1) * my knowledge the CMOS battery is soldered to the motherboard and cannot be replaced like for example on desktop PC
  (* 2) * remove the CMOS battery would NOT reset the BIOS nor would be to remove the passwords.

  If I understand your problem, you are not able to access the BIOS, but you can start the laptop and the system. Is this correct?

  You have a kind of password (user / supervisor password?)

• HP ENVY Phoenix 860-000nd: cannot change bios Phoenix language - utility Configuration BIOS HP - HP ENVY 860-000nd

  Hello

  trying to change the language of the BIOS, the Bios HP Configuration utility, but get the error code 6 - access denied (failed due to permissions of the BIOS).

  BIOS version is vA0.08 THI.

  I can read (get) successfully, but cannot change any settings... tried to change other settings to no avail.

  What Miss me? Should I first set a password?

  Hi there @mucckki,

  Welcome to the Forums of HP Support!  I understand that you want to change the BIOS language on your system in current Dutch English.  I'm happy to help you with this.

  Was the Dutch language that the BIOS was set to out of the box or he later changed in Dutch?

  If original default systems was English, you can try to look at the motherboard of your system guide. HP and Compaq Desktop PCs - specifications of the motherboard, Thimphu. At the bottom of the page is an indicator for the riders for the BIOS and CMOS password. If your default language was English, you can use the jumper to clear the current CMOS settings, including language.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Cannot access BIOS on Satellite C875

  Hello

  I have a Sattelite C875 - 13L PSCBCE.
  I am running windows 8, and when I press the F2 key to start the computer, the computer starts Windows. I cannot access the Bios is only from windows 8 (settings > general...)
  I have another problem too, I can't turn off the option "open Panel - Power one. This option is enabled or not, the PC boots with the Panel open.

  Thank you very much for your answers.

  The complete stop next http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm and after to redo this laptop start and try to enter the BIOS settings.

• Cannot access bios after installing the video card

  I have a PC HP 800 G1 tour.  When I install an EVA GT 520 external video card I can access is no longer the first screen to get the bios unless I get out the video card.  I want to change the bios to use only the external card, or at least to see the initial splash screen, but cannot access it.  It is running windows 8.1.  I updated the bios to the lasest version and still the same.

  Hello:

  You may need to change some BIOS settings - even if you add an external video card...

  http://support.HP.com/us-en/document/c03653200

• ThinkPad E330 cannot enter BIOS/UEFI more

  Hey guys, I got a very annoying problem with my E330.

  He came without OS, so I put 8 Win on the preinstalled HARD drive. Then, I went out for one SSD and put Win 7 on it.
  (all UEFI mode)

  Since then I can not enter in the BIOS/UEFI more press either Enter or F1.
  Pressing enter gives me still a beep, but then Windows continues to load normally instead of view several options, like he used to do.

  And yes I am aware that I need a cold start to Win 8 to enter the UEFI

  The only way to access UEFI at this time is through charms-bar restarting 8 Win in UEFI thing.

  I tried to reflash the BIOS that does not of course because this is the same version, tried to remove the CMOS battery, that gave me an opportunity to enter the UEFI with F1 when he complained the date/hour of time.

  Switching to Legacy only brings me to an infinite PXE - something loop of the error, but I still cannot get into the BIOS.

  I tried pressing all combinations of keys Fn + F and without the Fn. Nothing works.

  I don't want to return the laptop, but it is a deal breaker for me if I can't Win 7 running on this subject with UEFI accessible.

  OK, the problem was solved with the help of the someotherguy of the user from the forum. It has detailed instructions.

  Looks like that install Win 7 mode UEFI corrupts the BIOS.