Presario SR5100 - CPU fan failure / BIOS firmware update

Similar Questions

• Noise of Dell Studio XPS 9100 CPU fan failure CPU fan

  My Dell Studio XPS 9100 did a loud intermittent noise for a few months and then last week I got a CPU fan fault message while booting. I blew all the dust from the fan and I always get the CPU fan failure message. I finally got the system starts by placing a small fan blowing air into the funnel will CPU/processor fan.

  Alas, my warranty expired 2 weeks ago. I'm kicking myself contacting technical support a few months ago, when the problem started.

  I need to replace the fan. What parts need me, and where can I get them?

  Thanks much for the reply.

  Thank you. After being tossed a little I transferred to the sales and ordered a new CPU fan for a cost total which includes shipping and taxes of $42.25. Too bad it wasn't 2 weeks ago, then she would have been free.

  The seller said that I would not need thermal paste. Is this correct?

  Best regards

  Them

• CPU fan failure: Dell inspects the expedient to the customer before computers the they?

  After waiting 11 days which includes I believe a week in the production of my Tower, 17/11/2015 I finally received my new Inspiron Desktop Edition Gamer (Intel). I turned on the computer and guess what I saw on the screen "CPU Fan Failure".  So now, I have to return the tower to a Dell for a tech to fix the problem with the fan.

  Here's my question. Fact or not Dell inspect their product before they will deliver to their customers? Well, Dell has not delivered the product if a "CPU Fan Failure" had existed before shipment.

  Unfortunately things can occur in vessels too...

  Before send back you, open the case and check if the cable is correctly connected to the motherboard. The cable may have jumped out of the motherboard.

  Just unplug it and plug it back to the motherboard. If it's totally off the Board, you can go to the Support page for this exact model and look for the link at the top of this page for the manual. Most service manuals show a diagram of components/connectors on motherboard and CPU fan connector must be checked.

  If everything's fine, which solves the problem, so you won't have to send again.

• Error Cpu fan failure cannot Acess Bios Compaq Presario SR1315CL Help!

  I wanted to upgrade the processor. I have 2 extra cpu a Sempron 2500 + and an Athlon 64 3200 +.

  I asked for advice on the card of another (wrong place, laptops), but got some good advice.

  I decided to try the Athlon 64. After having removed the radiator and the fan and replace the cpu,

  I get the ERROR: CPU Fan has failed! PC will turn off automatically in a few seconds.

  PC service immediately to avoid damage to the PC.

  I tried the Sempron, same thing.

  I made sure that all the connections are good. The fan turned by the way... Works very well.

  I studied the error and and found advice to enter the bios by pressing F1 and adjustment

  the bios with the default settings. I can't get into the bios. I pressed on, F1, Del, and F10. F2 will enable

  to continue to start. The processor is listed as unknown to the station.

  So how can I access the Bios? I kill the PC?

  N ° you should have cleared CMOS before installing the CPU. The voltage and FSB settings are different on the Athlon 64.

  Remove CMOS battery and set the clear CMOS in position 2-3 then press and hold the power button to @15 seconds or more.

  Reinstall the original CPU back in to check that all is well.

  If all is well then update your BIOS to the most recent available such that he would have supported for processors more. The link is to the latest BIOS for your motherboard from the PC.

  Clear CMOS again, and then reinstall the Athlon64

• 500-210qe Pavilion: Pavilion 500-210qe: cpu fan not detected after update BIOS

  Pavilion 500-210qe started showing ' 511: cpu fan not detected; F1 = boot' message.  I checked the BIOS rev level and set to upgrade to the latest (80.13 FRIEND) but the problem persists.

  At startup, the cpu fan is not running, but after pressing F1.  Please notify.

  From the least expensive option, replace the cpu fan (which comes with the heat sink) has solved the problem.

• CPU fan failure

  I have a Compaq SR5510F and when turn it on, the error message: don't have a CPU fan.  I took off on the side of the processor, and two fans that I see are turning very well and one that is in the box also turns fine.  Is the CPU fan, one upstairs that you can not without disassemble everything?  What should I do?  Anyone else have this problem with this model?

  There are 3 fans in the SR5510F. The PSU (Power Supply) contains an extraction fan. The system fan is also an exhaust fan. The CPU fan is mounted on top of a metal radiator. The message "CPU fan has failed" is triggered by a sensor. The cause can be a dusty fan, or obstruct the fins of the heatsink or a fan that runs too slowly to dust.

  See this document

  

• HP dc7800: dc7800 BIOS & firmware update

  I have several dc7800 (SFF 2 & 1 CMT) I want to update BIOS and firmware so I can upgrade processors to support Q9400 processor I have sitting here. Can someone help me with the process of upgrading the BIOS and firmware?

  Hello:

  Now that section of the forum office pc working again, here is a link to a post resolved when I gave the same exact instructions to another Member of the forum and it worked as expected.  This being for the dc7700...

  http://h30434.www3.HP.com/T5/desktop-software-and-how-to-questions/invalid-processor-microcode-update/m-p/5399213#M62390

• Error: Failure of CPU fan

  The original motherboard was not on my Pavilion a6528p. I got fed up with accidents several blue screen whenever I started to use it. Once he ran for a while (an hour or two), he has generally kept running. Worked to try to eliminate the virus/malware (multiple programs found no no), the memory test (used memtest86 +, ran all night without fault), CPU test (Prime95 torture test used, ran all night without fail) decided to try another motherboard. Not able to find a new, so decided to take a chance on a used.

  The jury used (so far) has never crashed. It is therefore a good thing. However, every startup I get the message "ERROR: CPU fan failure! Press F2 to continue to start. "I believe that this message is incorrect because I ran Prime95 torture for hours test and the temperature of the Processor reported by CPUID HW Monitor program is around 52 degrees c for each carrot. When I run Prime95 torture test, the temperature of the CPU are much lower, around of 38 degrees C.

  The HP support document http://support.hp.com/us-en/document/c00013522 describes in detail by selecting Hardware Monitor in the Advanced BIOS menu. There is no choice in the latest version of the BIOS, I installed on the HP website, which identifies as BIOS Version/Date American Megatrends Inc. 5.43, 10/09/2009.
  
  Because the help document is incorrect and no help, someone has ideas how to eliminate this message CPU Fan has failed, what happens whenever I start the computer?

  JimK Hello,
  
  Not all BIOS versions have the same settings and you're right that your BIOS is not this setting. Looking at what the settings you have (http://goo.gl/1mCvq) there is no parameter, you can change even not to ignore the message.
  
  The motherboard doesn't like not the CPU fan that is currently installed, if the fan is not mounted in quick power enough, do not provide enough cooling, or is simply not sufficiently powered is unknown, nor can it be determined. You can try to unplug the CPU fan and reconnect to ensure a solid connection. Probably, you should be able to say that the CPU fan turns so you can figure out if she has no or not enough quickly.
  
  Your options after that are to
  1. process by pressing F2 at startup to work around the error
  2. try another fan for processor to see if you can get the motherboard like.

• Fan CPU T410 failures?

  So I replaced my fair share of fans of the T61 processor because of their disappearance, lock up and giving a fan error when starting.

  Now I begin to see a rash of new brand with T410 CPU fan failure.

  Show everyone in the biz to repair a growing trend of this? Or is it just me?

  
  

• Kaput CPU fan

  I need info about the CPU fan OK for my a6030n HP Pavilion with an ECS MCP61PM-HM nettle - GL8E motherboard.  Athlon 64 x 2 (B) 4800 + 2.5 GHz Socket AM2.  Just fan or radiator?  Message on screen is CPU and system fan failure.  The system is 7 years, but I can't afford a new.  Thank everyone in advance of aid =)

  Hello @Nana2004,

  I understand that you get the error CPU fan has failed on your HP Pavilion a6030n desktop PC. I provided you with the HP support document: error: CPU fan failure, who will provide you with steps to try before spending money on a fan that you may not need. In the case where you need to replace the heat sink search number is 5187-5704 and can be found in a Google search.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great weekend!

• Satellite P750 - after update BIOS CPU fan runs faster

  Hi all

  On my Satellite P750 (PSAY3A - 02L 001)

  Since I've updated my BIOS to version 2.40, I noticed that the CPU fan runs much faster then normal.

  Even more, when I go in options inside BIOS configuration, saving it comes up with "an invalid entry.

  Has anyone experienced this problem? Know a way to solve this problem?

  In General, old BIOS is not available when one is offered on Toshiba new download page.
  If you have older version of BIOS try to contact the nearest Toshiba service provider and ask for help. They have access to the database of Toshiba and can get the ld for you version.

  By the way: have you tried to change the power settings for the cooling method and less upgraded?
  This should reduce the activity of fan cooling.

• My slimline s5212y cpu fan seems to work fast constantly.is it an update of the bios for this?

  Hello

  I replaced the motherboard on a tower of s5212y slimline (the same Board of model). Everything works fine, but the cpu fan seems to work too quickly, constantly. Y at - it an update of the bios that fixes this?

  ICU wrote: Hi, I have replaced the motherboard on a tower of s5212y slimline (the same Board of model). Everything works fine, but the cpu fan seems to work too quickly, constantly. Y at - it an update of the bios that fixes this?

  Hello uti, I checked for an update of the BIOS of your system but could not locate a.

  You can try to reset the BIOS, either by removing the CMOS battery, or perform the jumper pin method.

  If you remove the CMOS battery, boot the system and enter the BIOS and reset the time, day, and year, save these settings and reboot the system.

• Workstation xw4600: upgrade CPU to Xeon X 3363 xw4600 - get error on POST firmware update

  Until classified Core 2 Duo 8400 3.0 Mhz CPU to Xeon X 3363 2.83 Mhz CPU using 'Sticker Mod' on X 3363.

  Works fine, but with an error at startup.

  Get this error on the POST:

  "1801 Microcode Update error-
  Missing or invalid processor update. Please
  Contact Hewlett - Packard Company for a new firmware
  Updated to support the new processor not. »

  The current version of BIOS is 1.34 which I think is the most recent.  How to upgrade the BIOS to the Stepping of the processor?

  Use a xw6600 or an update of the BIOS z400?

  I was able to get help on changing the Bios microcode for the Xeon x 3363 processor.

  Fans to run at normal speed now and start error "1801" disappeared.  Machine runs great!

• HP Pavilion DV6: at startup BIOS showing CPU fan has stopped working, but I checked the fan is in good condition

  Hello

  I bought my HP Pavilion dv6 laptop 2011 as it starts a is overheating, freezing windows with noisy fan sound etc... but now, on information in BIOS boot indicating that the CPU fan has stopped working so immediately, I checked that I couldn't hear any noise from fan and no symptoms as fan works so I disassembled my laptop and removed CPU cooler fan only. Simply with the help of the battery, I checked the CPU fan it is running perfectly alone. but it does not work with the laptop.

  Please help me and guide what is the cause of this problem and how to solve this problem.

  Gassab

  HI @Kartic

  Welcome to the HP Forums!

  This is a fantastic place to find answers and suggestions!
  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  How can I find my model number or product number?

  I understand that since you had the laptop he had an overheating problem with a loud fan noise that causes freeze it.

  Recently, you have received the message that the CPU fan has stopped working and you couldn't hear the rotation of the fan to the top.

  You have removed the fan and checked, but the fan works.  It is possible that the connection was not safe in Notepad.

  Here is a link to an overheating and Auto Shutdown problem troubleshooting.

  Have you checked for an update of the bios of your laptop. You have provided the series of laptop you have, but not the exact model, so I'm not able to check it for you.

  You can run the Wizard to help HPin order to facilitate this process.

  Like a bios update has the potential to cause damage, you can contact HP technical support using this procedure.

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  Here is a link to the guide to maintenance and Service Guide HP Pavilion dv6000 Notebook PC for your laptop.

  You can replace the thermal paste on the processor. Here is a link to a YouTube video on this process.

  How to apply thermal paste

  Good luck!

• Compaq Presario CQ5110Y: Compatibility of CPU fan

  After doing a little research, I have another question regarding the change of my CPU fan.

  An article I read said that I need to check the compatibility of the new fan that I use as a replacement for my fan CPU 7 year and liked because he must blow at the same speed as the original fan; otherwise, the BIOS may not recognize the fan.

  How can I find out if the new fan specifications are the same as the old one? I already bought a 80 mm fan, but I don't know if it's the right to be placed on the radiator.

  Thank you.

  Thanks for asking this question.  The simple answer is a program called CPUIDHWMonitor.