Error creating installation: NEITHER Variable Manager CDK_Validate_DistParts_2010.vi

Similar Questions

• "Not a valid error code" when you create a shared variable of data type custom

  I am trying to create a shared variable with a data type of a 2d double table. I created a custom control that contains a table with a numeric type for this 2d. Manager of distributed system v12 I select 'add a variable', then select 'of the custom control. Once select my control I get the following error: "invalid data type. You want to choose a different data type. Any advice as to why it doesn't work? Thank you.

  This seems to be recorded in the CAR #405941.  All this is a bit strange, but I'll try better possible workaround solutions I can.  I tested a large number of these myself, and here is what I found.

  1. make sure that the custom control you did was created in 2012 of LabVIEW or you save it in an earlier version.  If you save on an earlier version, you may also open the .ctl in LabVIEW 2012 and resave it (I needed to do).  I tried to create my own control in 2012, as well as save the control to a previous version, the two worked, but I don't end up with the same result (I don't understand this, but I wanted to mention it so that you know).

  2. it seems that you are able to make the variable shared by program by modifying the example of the community to adapt to your needs.  If you do not need to create many variables it may be the best option if it works for you.

  I would also try adding the variable of the LabVIEW project, you are working on that.  It wasn't a direct troubleshooting step but there are several ways of doing things in LabVIEW and, sometimes, one of them is working while the other does not.

  Edit: Example of community is here https://decibel.ni.com/content/docs/DOC-16863

• I'm trying to update Adobe Photoshop and I get the following error: extensions 6.0.8 Manager updated there wasn't an error of installation of this update. Quit and try again later. Error code: U44M1U5 Adobe Application Manager there was an error installin

  I'm trying to update Adobe Photoshop and I get the following error:

  The extensions 6.0.8 Manager updated there wasn't an error of installation of this update. Quit and try again later. Error code: U44M1U5 Adobe Application Manager there was an error of installation of this update. Quit and try again later. Error code: U44M1U5 Photoshop Camera Raw 9.1.1 (CS6) there is an error in the installation of this update. Quit and try again later. Error code: U44M1U5 Adobe Bridge CS6 5.0.2 update there was an error of installation of this update. Quit and try again later. Error code: U44M1U5 Adobe InfrastructureCS6 of CSXS there was an error of installation of this update. Quit and try again later. Error code: U44M1U5 Adobe Photoshop 13.0.1.3 there is an error in the installation of this update. Quit and try again later. Error code: U44M1U5 Adobe Bridge CS6 5.0.2 update there was an error of installation of this update. Quit and try again later. Error code: U44M1U5 Dynamic Link Media Server CS6 1.0.1 update there was an error of installation of this update. Quit and try again later. Error code: U44M1U5

  Any ideas?

  U44... Update error http://forums.adobe.com/thread/1289956 can help

• Error creating socket to host and port: EPM11:1433

  Hi intend to Experts,
  
  I try to configure EMP 11.1.2.1 (Planning)
  DBMS: SQL server 2005 (Express Edition)
  OS: 2008 R2 x 64
  
  
  I get the error message after providing credentials of RDBMS ' error creating socket to host and port: Reson EPM11:1433: connection refused: connect ".
  
  
  Help, please...
  
  
  Concerning
  Kumar

  You may need to enable tcp/ip

  SQL Server Express to listen on the named pipes and shared memory. With a default installation, you can not connect remotely to SQL Server Express. You'll need to enable TCP/IP and check if the firewall is enabled.

  To enable TCP/IP:
  On the start menu, choose all programs, point to Microsoft SQL Server 2005, point to Configuration Tools, and then click SQL Server Configuration Manager.

  Optionally, you can open the computer by right click on Desktop Manager then choosing manage. In computer management, expand Services and Applications, SQL Server Configuration Manager.

  Expand SQL Server 2005 Network Configuration, and then click protocols for InstanceName.

  In the list of protocols, right-click the protocol you want to enable and then click Enable.

  The icon for the Protocol change to indicate that the Protocol is enabled.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• LV 2011: Error 1334: Installation cannot find a file in data.cab

  I'm trying to create an installation using Setup LV2011. After a success, I test it on PC Windows 7 x 64 and I see this error during installation:

  Error 1334: The file: XYZ cannot be installed because the file is not found in the data.cab file... Continue?

  I check the data.cab file and see the file XYZ. The XYZ file is BAT file that I want to run after the installer is finished, or another file included in the installer.

  Any suggestions?

  Hello

  You run the patch f2? It is supposed to solve a known problem with the construction of large installers, it isn't you receive the error message, but it could be a side effect.

  I checked through the other problems for LabVIEW 2011 known, and I have not found something that seemed relevant. I also checked for corrective action requests and have not found those that mention the same problem.

  I have found some similar questions of LabVIEW 8.5, and in these cases, the culprit was a + in file names. You can check that the names of files in your error message exactly the names of files in the file data.cab. You can also try to change file names relevant to something very simple with only letters.

  I was wondering, are you will be able to include all the other files that do not throw errors, or each file that you try throws errors?

  If you wish to post your project, I would be happy to see if I can reproduce the error.

  Kind regards

  Luke B.

• Reference Dell D10S: Software 451dn Laserjet Pro 400 has error during installation.

  LaserJet works fine when plugged in to USB, but now moved to a place wireless. The software will not work.

  I tried install printer Win 10: "the pilot is not available.
  Tried to uninstall the universal printer driver, restart, reinstall the HP driver, error (without code).

  HP Print doctor can find the device downloads the latest version, but it crashes every time (error, no codes).

  Win 10 can see the printer... it is therefore in the range wireless.

  I tried all the software different packaging to win 10 on HP site... all get an error during installation.

  Here's what worked.  I downloaded the universal print driver from HP.  These installed to their default location.  Taking note of where they have installed.

  Then, 10 Windows, try installing the printer laserjet Pro 400.  "Missing drivers".<- this="" is="" an="" important="" step.=""  leave="" the="" printer="" icon="">

  Then go to control panel, small icons.  Device Manager.  Search for printers, find the Laserjet printers.
  Right-click and choose update drivers.  Do not update automatically.  Choose the manual option.

  Look for the universal printer driver.  Wait a minute... BOOM.  All right.  Printing of all wireless PC and laptop.

• Error creating Message Database

  When you try to run the WLCCA after installation I get this error.

  Error creating message database. Reload the database?

  I click Yes or no the same problem...

  Error creating message database. Contact development for steps to reproduce.

  Any help is appreciated, thanks!

  Hi Thomas

  You can ignore it. I do not understand DB XML for messages on the beta, so the application will generate if on the fly

  It should show only on the first load, then during subsequent runs, the file will be available, no more errors should be displayed

  I will include the file on future updates beta

  concerning

• Created installation media is not valid.

  Original title: the inserted media is not valid

  I found an error while I try to reset my win-8 pro...

  The inserted media is not valid... Make sure that you have inserted your support installation or windows recovery...
  . FYI... I don't have installation media, but I installed through upgrade online... later I found it on the control panel... There is an option to get the recovery...
  so started to create recovery media... inserted a cd and completed my recovery... Media Player so far, everything was fine... later I try to start to update in pc Configuration inserted my cd... once again, I found an error "the inserted media is not valid"...
  can someone help me... How to solve this problem...
  Thanks and greetings
  Vinoth

  Hi Vinoth,

  Thanks for posting this question in the Microsoft Community Forums.

  I see that you have created the installation media is recognized as invalid.

  I wish to inform you that CDs can serve as installation media. Only the DVD and the storage capacity of 4 GB pen drives to create installation media.

  Please answer this question so that we can better help you.

  Why do you refresh system?

  Follow this link to learn how to create installation media.

  How to create an installation media for a PC refresh or reset

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  Check out the following link to learn how to perform the update of the system.

  How to restore, refresh or reset your PC

  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  Please get back to us with the results.

  If you have questions about the Windows operating systems, please post them on this Forum. We are happy to help you.

• Looking for what software required for the Installation of Enterprise Manager

  Hi all

  I'm quite new to work with Enterprise Manager, previously used 11g Database Control, but never install Enterprise Manager (OEM). Now, due to the increase of the databases, I am planning to install OEM (Oracle Enterprise Manager) to list all the database (more than 20 Linux servers) in one place.

  I have read the documentation and still confused on what needs to be installed for the OEM. I intend to use OEM 12 c Release (12.1.0.4), my current databases are 11 GR 2 (11.2.0.4).

  Could you tell what I need to at the bottom of the list?

  1. OEM (12.1.0.4)
  2. Web logic Server (do I need that separately, or it will be installed with OEM)?
  3. OEM agent on all other 20 servers (I have to install a software on them? Please guide)
  4. A specific version of Java.

  Please guide me if I need any other software or plugin.

  I have already installed the oracle software and created a database by using the "Custom" option in DBCA. My server operating system is Linux 64 Bit for Enterprise Manager.

  Thanks in advance.

  Hello

  You need to control software for cloud 12 c OEM, software database (for creating repository) and software agent (for tracking targets on other hosts)

  Java Development Kit (JDK) 1.6.0.43.0 and Oracle WebLogic Server 11 g Release 1 (10.3.6) are installed by default with the installation of SGD 12 c, even if you have a possibility to install it separately if you want, but Oracle strongly recommends using the installation process of 12 c to install the JDK and Oracle WebLogic Server for use with Enterprise Manager 12 c.

  Here is the link for Enterprise Manager Cloud control 12 c Architecture

  http://docs.Oracle.com/CD/E24628_01/doc.121/e25353/overview.htm#EMCON112

  For 12 c WHO installation steps refer to

  http://docs.Oracle.com/CD/E24628_01/install.121/e22624/TOC.htm

  EM 12 c R2: How to Install Enterprise Manager Cloud Control 12.1.0.2 using a Graphics Mode (Doc ID 1488154.1)

  For installing the agent, see

  Installation of the Management Agents to help add host Wizard or EM CLI targets

  http://docs.Oracle.com/CD/E24628_01/install.121/e22624/install_agent.htm#EMBSC181

  Installing agents using other methods

  http://docs.Oracle.com/CD/E24628_01/install.121/e24089/part_installing_agent.htm#sthref323

  Download 12 c

  http://www.Oracle.com/technetwork/OEM/Enterprise-Manager/downloads/index.html

  Kind regards

  Rahul

• SEVERE: Error creating the repository

  Ugh, help, stayed in it for hours! I messed up my oracle dbconsole, and now service dbconsole itself disappeared! (I checked services.msc on my windows xp pro) I'm on oracle 11 g 2

  So I gave up and recreate repo em but got the error msg ff:

  C:\Documents and Settings\abigail > emca-rest create

  EMCA STARTED on 11 October 2013 05:17:51

  Configuration MS Assistant, Production of the Version 11.2.0.0.2

  Copyright (c) 2003, 2005, Oracle.  All rights reserved.

  Enter the following information:

  SID of the database: orcl

  Listener port number: 1521

  User SYS password:

  SYSMAN user password:

  Do you want to continue? [yes (Y) (N) /no]: y

  11 October 2013 05:18:08 oracle.sysman.emcp.util.EMCALogManager addLogFileInterna

  l

  WARNING: Adding file E:\app\abigail\cfgtoollogs\emca\SP2-0640 journal: not connected

  \emca_2013_10_11_05_17_51.log failed. Messages will not be saved in this file.

  11 October 2013 05:18:08 oracle.sysman.emcp.EMConfig perform

  INFO: This operation is currently logged in E:\app\abigail\cfgtoollogs\emca\SP2-0640

  : Not connected\emca_2013_10_11_05_17_51.log.

  11 October 2013 05:18:08 oracle.sysman.emcp.EMReposConfig createRepository

  INFO: Creation of the EM repository (this may take a while)...

  05:18:08 oracle.sysman.emcp.EMReposConfig rely on 11 October 2013

  SEVERE: Error creating the repository

  05:18:08 oracle.sysman.emcp.EMReposConfig rely on 11 October 2013

  NEWS: Check the log to E:\app\abigail\cfgtoollogs\emca\SP2-0640 file: no con

  nected\emca_repos_create_ < date > .log for more details.

  11 October 2013 05:18:08 oracle.sysman.emcp.EMConfig perform

  SEVERE: Error creating the repository

  Check the log to E:\app\abigail\cfgtoollogs\emca\SP2-0640 file: not connected

  \emca_2013_10_11_05_17_51.log for more details.

  Unable to complete the configuration. Check the log to E:\app\abigail\cf file

  gtoollogs\emca\SP2-0640: not connected\emca_2013_10_11_05_17_51.log for more det

  ails.

  My Log file

  CONFIG: queue E:\app\abigail\cfgtoollogs\emca\orcl\emca_repos_create_2013_10_11_05_13_56.log

  11 October 2013 05:13:56 oracle.sysman.emcp.EMReposConfig createRepository

  INFO: Creation of the EM repository (this may take a while)...

  11 October 2013 05:13:56 oracle.sysman.emcp.EMReposConfig createRepository

  CONFIG: ORA-20001: SYSMAN already exists...

  ORA-06512: at line 17 level

  oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-20001: SYSMAN already exists...

  ORA-06512: at line 17 level

  at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1655)

  at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeScript(SQLEngine.java:1005)

  at oracle.sysman.assistants.util.sqlEngine.SQLPlusEngine.executeScript(SQLPlusEngine.java:339)

  at oracle.sysman.assistants.util.sqlEngine.SQLPlusEngine.executeScript(SQLPlusEngine.java:380)

  at oracle.sysman.emcp.EMReposConfig.createRepository(EMReposConfig.java:511)

  at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:229)

  at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)

  at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)

  at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:590)

  at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1453)

  at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:574)

  at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:522)

  05:13:56 oracle.sysman.emcp.EMReposConfig rely on 11 October 2013

  SEVERE: Error creating the repository

  05:13:56 oracle.sysman.emcp.EMReposConfig rely on 11 October 2013

  NEWS: Check the log to E:\app\abigail\cfgtoollogs\emca\orcl\emca_repos_create_ file < date > .log for more details.

  11 October 2013 05:13:56 oracle.sysman.emcp.EMConfig perform

  SEVERE: Error creating the repository

  See the log file at E:\app\abigail\cfgtoollogs\emca\orcl\emca_2013_10_11_05_13_31.log for more details.

  11 October 2013 05:13:56 oracle.sysman.emcp.EMConfig perform

  CONFIG: Stack Trace:

  oracle.sysman.emcp.exception.EMConfigException: error creating the repository

  at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:241)

  at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)

  at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)

  at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:590)

  at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1453)

  at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:574)

  at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:522)

  11 October 2013 05:13:56 oracle.sysman.emcp.EMConfig restoreOuiLoc

  CONFIG: Restoration of oracle.installer.oui_loc to E:\app\abigail\product\11.2.0\dbhome_1\oui

  ALTER YOUR_TEMPORARY_TABLESAPCE add tempfile XXXXX reuse;

• Need help: error creating record

  Hi refugees,

  Gud morning...

  I get this error during the creation of the new record twice (for the first record, it works fine...)

  As master details page, I am Manager differently which... first of all I save the details of masters and while saving the level of detail, I will assingn the id of the header to the attribute display... when I create the first new record and save it works fine... but when I try to create a record more it shows error... This is the code... AMImpl

  It is showing the error in the createRecord() method only... it runs until the row.setNewRowState (Row.STATUS_INITIALIZED) after that only it is throwing error (assigning values for the attributes of display...) But for the first record it works fine...

  Please... give your valuable suggestions...

  ' Public Sub createRecord (pageContext OAPageContext, OAWebBean webBean)

  {

  saveMasterDtls (pageContext, webBean);

  String vunitid = pageContext.getParameter ("ctrlUnitId");

  String vapproval_id = pageContext.getParameter ("ctrlApprovalId");

  OAViewObject vo = getcapexApprovalHierarchyVO1();

  Try

  {

  String ctrl_headerId = null;

  Conn connection = (Connection) pageContext.getApplicationModule (webBean) .getOADBTransaction () .getJdbcConnection ();

  String query = "select header_id OF XXNH_CAPEX_APPROVALS where unit_id =: 1 and APPROVAL_id =: 2;

  PreparedStatement stmt = conn.prepareStatement (query);

  stmt = conn.prepareStatement (query);

  stmt.setString(1,vunitid);

  stmt.setString(2,vapproval_id);

  ResultSet rs = stmt.executeQuery ();

  RS = stmt.executeQuery ();

  While (RS. Next())

  {

  ctrl_headerId = rs.getString (1);

  System.out.println ("id of the header in all new record:" + ctrl_headerId);

  }

  If (! vo.isPreparedForExecution ())

  {

  searchRecords (pageContext, webBean);

  }

  Line line (Row) = vo.createRow ();

  vo.insertRow (row);

  row.setNewRowState (Row.STATUS_INITIALIZED);

  System.out.println ("before assigning values id...");

  vo.getCurrentRow () .setAttribute ("HeaderId", ctrl_headerId);

  vo.getCurrentRow () .setAttribute ("UserUnitId", vunitid);

  }

  catch (System.Exception e)

  {

  throw new OAException ("error creating record:" + OAException.ERROR, e);

  }

  }

  =======================

  ' Public Sub saveMasterDtls (pageContext OAPageContext, OAWebBean webBean)

  {

  / * checking already Masters details existed or not for unity & approval * /.

  System.out.println ("master dtls start");

  String v_unitid = pageContext.getParameter ("ctrlUnitId");

  String v_unitName = pageContext.getParameter ("ctrlUnitName");

  String v_approval_name = pageContext.getParameter ("ctrlApprovalName");

  String v_approval_id = pageContext.getParameter ("ctrlApprovalId");

  OAApplicationModule am = pageContext.getApplicationModule (webBean);

  int cnt = 0;

  Try

  {

  Connection pconn = (Connection) pageContext.getApplicationModule (webBean) .getOADBTransaction () .getJdbcConnection ();

  String pquery = "select count (*) FROM XXNH_CAPEX_APPROVALS where unit_id =: 1 and APPROVAL_id =: 2;

  PreparedStatement stmt = pconn.prepareStatement (pquery);

  stmt.setString(1,v_unitid);

  stmt.setString(2,v_approval_id);

  ResultSet rs = stmt.executeQuery ();

  While (RS. Next())

  {

  CNT = rs.getInt (1);

  }

  System.out.println ("count is:" + cnt);

  If (cnt == 0)

  {

  System.out.println ("If condition start");

  Tran OADBTransaction = getOADBTransaction();

  Number v_header_id;

  v_header_id = am.getSequenceValue ("XXNH_CAPEX_APPROVAL_SEQ");

  capexApprovalVOImpl vo = getcapexApprovalVO1();

  If (!) VO.isPreparedForExecution ())

  {

  vo.executeQuery ();

  }

  Line = vo.createRow ();

  row.setNewRowState (rank. STATUS_INITIALIZED);

  row.setAttribute ("UnitId", v_unitid);

  row.setAttribute ("UnitName", v_unitName);

  row.setAttribute ("ApprovalName", v_approval_name);

  row.setAttribute ("ApprovalId", v_approval_id);

  row.setAttribute ("HeaderId", v_header_id);

  vo.insertRow (row);

  getTransaction () .commit ();

  System.out.println ("unless condition end");

  }

  on the other

  {

  capexApprovalVOImpl vo = getcapexApprovalVO1();

  vo.executeEmptyRowSet ();

  }

  }

  catch (System.Exception e)

  {

  throw new OAException ("error in recording: master Dtls prepare Stmt query:" + OAException.ERROR, e);

  }

  }

  ============================================

  ' Public Sub searchRecords (pageContext OAPageContext, OAWebBean webBean)

  {

  String v_unitid = pageContext.getParameter ("ctrlUnitId");

  String v_approval_id = pageContext.getParameter ("ctrlApprovalId");

  OAViewObject vo = getcapexApprovalHierarchyVO1();

  vo.setMaxFetchSize(-1);

  vo.setWhereClause (null);

  vo.setWhereClauseParams (null);

  int v_header_id = 0;

  Try

  {

  Connection pconn = (Connection) pageContext.getApplicationModule (webBean) .getOADBTransaction () .getJdbcConnection ();

  String query = "select header_id from xxnh_capex_approvals, including 1 = 1 and = unit_id: 1 and APPROVAL_ID =: 2;

  PreparedStatement stmt = pconn.prepareStatement (query);

  stmt.setString(1,v_unitid);

  stmt.setString(2,v_approval_id);

  ResultSet rs = stmt.executeQuery ();

  While (RS. Next())

  {

  v_header_id = rs.getInt (1);

  vo.setWhereClause ("HEADER_ID =" + v_header_id);

  }

  vo.executeQuery ();

  }

  catch (System.Exception e)

  {

  throw new OAException ("error in query records...") Prepare the query Stmt: "+ OAException.ERROR, e);

  }

  }

  ============================================================

  Best regards and thanks,

  Jaya...

  Jaya,

  could you please check if the Id of the header is marked as primary key in database level or the level of the view object.

  Concerning

  GYAN

• Captivate 8 javascript error cannot find the variable cp

  I created a responsive project with Captivate 8 trial (windows).  The presentation will be to load and play locally, but when you go from a server, the presentation hangs on the preloader. He won't play in any browser. Safari on Mac Error Log shows the following errors:

  Cannot find variable cp

  Error	/Du file / line
  cpInit	index.html: line 17
  initializeCP	index.html: line 25
  constructDIVs	index.html: line 59
  (anonymous function)	index.html: line 71
  b	CPXHRLoader.js: line 37
  (anonymous function)	CPXHRLoader.js: line 37

  A patch would be appreciated to Adobe.  We are trying to launch a project of e-learning of Captivate on July 31, 2014.

  After reading blog after blog, I discovered the Captivate team changed the variable "cc" to "CP" in the API.  With the previous version of Captivate installed 7 caused the error for the variable javascript missing "cp".  Uninstall the previous version of Captivate and publish the presentation, once again resolved the conflict.

• 1603 fatal error during installation

  Hi all

  3 days ago, I had Adobe Creative Cloud with access to all the Creative Suite applications. After downloading Adobe Application Manager, I started downloads / installs each of the applications. Nearly half of them came in saying that "Installation is complete although some optional components failed to install correctly.

  After hitting the hyperlink to "more details", I get this:

  Exit code: 6

  Please see specific errors below for troubleshooting. For example, the ERROR:

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 3 (s)

  -Payload: Microsoft_VC90_CRT_x86 1.0.0.0 {08D2E121-7F6A-43EB-97FD-629B44903403}.

  ERROR: Error 1935.An error occurred during the installation of Assembly component {43CC1B37-B20C-3EBC-9C04-F809989E4FD3}. HRESULT: 0X8007054F.

  ERROR: Install payload MSI failed with the error: - 1603 Fatal error during installation.

  MSI error message: Error 1935.An error occurred during the installation of Assembly component {43CC1B37-B20C-3EBC-9C04-F809989E4FD3}. HRESULT: 0X8007054F.

  ERROR: installer of third party Microsoft_VC90_CRT_x86.msi payload failed with exit code: 1603

  -------------------------------------------------------------------------------------

  Two questions. What should I do from here to ensure that all facilities of the problem be rectified? And this error code is something minor or major?

  Thank you

  dropbear1990

  Errors ' Exit Code: 6, "" Exit Code: 7 ".

  Mylenium

• Hosting with Go Daddy - error creating folder //images

  I just tried to download my Muse 2.0 on GoDaddy site and saw this arror in point 60% complete.

  Error creating folder //images

  The tech to Go Daddy, said that their server recognizes all the names of folders with slash.

  

  Suggestions appreciated

  So, here's a solution that works...

  After viewing the site at the main directory HOST example... / host/45/37857485/html

  Go to the GoDaddy localize file manager html folder that your files are backed up to...

  Click the folder

  Select all the contect

  Click on move

  Choose the HTML (home folder)

  That all of your files will go to the desired destination.

• Unable to create the session variable after upgrade to 11g

  Hi all
  
  I've updated RPD 10g for the OBIEE 11g version. Everything works fine. I can access the data when I click Show data on the table in physics. But when I tried to create the initialization block to create the session variable, I was not able to select the connection pool. Anyone have any idea why is - this? I've updated RPD and catalog using OBIEE upgrade utility. There was no error. Analyze in dashboards work correctly.
  
  [http://imageshack.us/photo/my-images/7/56090083.png/]
  
  Thank you

  Hello

  Reference: http://sranka.wordpress.com/2011/06/02/unable-to-create-session-variable-using-obiee-11-1-1-5-admin-tool/

  Thank you
  Saichand.v