Error handling... Users or roles?

Similar Questions

• tmboot: CMDTUX_CAT:827: ERROR: fatal error occurred; launch the user error handler

  I'm familiar with Oracle databases, but still learning my way around PeopleSoft administration.

  After validating the connection information of database with sqlplus from the same platform, psadmin application server start command generated an error message in the console.

  tmboot: CMDTUX_CAT:827: ERROR: fatal error occurred; launch the user error handler

  After the attempt failed to start the 8.49 application server, the journal entries were:

  PSAPPSRV.55837058 (0) [28/09/15 09:30:31] (4) the Configuration of server settings: {Journal

  Ging level = 5, sql trace = 12319, mask of trace sql client = 12319, peoplecode trace = 0,

  mask trace client PC = 4095, timeout = 300, County recycling = 2000, max such svc fail

  ures = 2, ORACLE, database name database type of == 'DBXX', database server = ", id = user

  'PXXXXX', connect id is "CXXXXXX"}

  ...

  PSAPPSRV.55837058 (0) [28/09/15 09:30:32] (1) GenMessageBox (0, 0, M): If the database

  gnon: could not sign database DBXX with user PXXXXX.

  PSAPPSRV.55837058 (0) [09:30:32 ago] (0) 28/09/15 start the server failed

  PSWATCHSRV.6685110 (0) [28/09/15 09:30:33] closing

  PSADMIN.58196170 (0) [28/09/15 09:30:39] (0) attempt to end on the dbxx field boot

  While the connectivity of sqlplus had tested OK from a client, PeopleSoft Signon pside.exe two levels on the same client Windows resulted in Invalid User ID and password for the access code.

  The psaccessprfl table had been updated with the connection of data validated by using a platform application server dms shell script.

  The area has been configured using the application server platform psadmin.  UserId, UserPswd, ConnectID and ConnectPswd had been entered and verified.  Passwords have been encrypted by the suite.

  The psoprdefn table showed correct SYMBOLICID uppercase and ACCTLOCK is zero on behalf of PXXXXX.

  The psaccessprfl table showed too correct SYMBOLICID.

  The psdbowner table showed the DBNAME and OWNERID both uppercase.

  The values encrypted in the database matched other environments on the same server platform.

  Why app server not sign to the Oracle database?

  Using the pscfg.exe, Manager of the Windows client configuration utility, I selected the 5 first checkboxes dialog SQL Trace on the left side of the tab of the Trace, I entered the name and location of the trace people tools to create and store the output of client sessions on the same tab.  Then tried another connection to the database, using the pside.exe utility.  The text resulting in the newly created text file showed the last executed statement was a select on the table psdbowner.  I removed my trace entries using pscfg.exe to stop tracing.

  Using the information provided by the last executed statement, I ran a request and discovered that the length (dbname) for the value of the column in the psdbowner table was one character longer than the expected value.

  After update the column value by removing the end interval, the utility psadmin on the server worked without error.

• Unable to Boot PeopleSoft area (PIA)-> CMDTUX_CAT:827: ERROR: fatal error occurred; launch the user error handler

  As I start my custom domain name (HC92), I get the following:
  

  exec PSWATCHSRV EI o '.\LOGS\stdout' '.\LOGS\stderr' - A - ID - 54217 d TESTSERV s PSWATCHSRV: process id = 1636... Has begun.

  exec PSAPPSRV '.\LOGS\stdout' EI '.\LOGS\stderr'[email protected] s PSAPPSRV d o: process id = 2656... Has begun.

  exec PSAPPSRV '.\LOGS\stdout' EI '.\LOGS\stderr'[email protected] s PSAPPSRV d o: process id = 2644... Has begun.

  exec PSSAMSRV o '.\LOGS\stdout"e".\LOGS\stderr"- A – d s PSSAMSRV TESTSERV: process id = 2832... Has begun.

  exec PSSAMSRV o '.\LOGS\stdout"e".\LOGS\stderr"- A – d s PSSAMSRV TESTSERV: process id = 2692... Has begun.

  exec PSANALYTICSRV o '.\LOGS\stdout"e".\LOGS\stderr"- A – d s PSANALYTICSRV TESTSERV: process id = 2448... Has begun.

  exec PSANALYTICSRV o '.\LOGS\stdout"e".\LOGS\stderr"- A – d s PSANALYTICSRV TESTSERV: process id = 496... Has begun.

  exec PSANALYTICSRV o '.\LOGS\stdout"e".\LOGS\stderr"- A – d s PSANALYTICSRV TESTSERV: process id = 2964... Has begun.

  exec PSRENSRV o '.\LOGS\stdout"e".\LOGS\stderr"- A – d s PSRENSRV TESTSERV: process id 2356 =... Has begun.

  exec PSMONITORSRV EI o '.\LOGS\stdout' '.\LOGS\stderr' - A - ID - 54217 d TESTSERV s PSMONITORSRV: process id = 1056... Has begun.

  exec JSL o '.\LOGS\stdout"e".\LOGS\stderr"- A – n //PSOFT_PC:9000 m 5 - M7-I have 5-j ANY - x 40 s 10 - c 1000000 w JSH: failed.

  tmboot: CMDTUX_CAT:827: ERROR: fatal error occurred; launch the user error handler

  tmshutdown - qy

  ==============ERROR!================

  Try to start met domain errors! See TUXEDO log for more details.

  ==============ERROR!================

  ----------------------------

  Domain LOG FILE

  ----------------------------

  PSADMIN.1088 (0) [2015-01 - 13 T 17: 06:34.774] (0) attempt to Begin priming on domain HC92

  PSAPPSRV.2656 (0) [2015-01 - 13 T 17: 06:46.056] (0) PeopleTools version 8.54 (Windows) from. Tuxedo server is APPSRV 99/2

  PSAPPSRV.2656 (0) [2015-01 - 13 T 17: 06:46.056] (3) detected time zone is Pacific SA Daylight saving time

  PSAPPSRV.2656 (0) [2015-01 - 13 T 17: 06:46.134] (0) used Cache Directory: C:\PS _CFG_HOME\appserv\HC92\CACHE\PSAPPSRV_2\

  PSAPPSRV.2656 (0) [2015-01 - 13 T 17: 06:47.056] (2) App Server host lag is DB + 0 0:00:00 (ORACLE PSHRDMO)

  PSAPPSRV.2656 (0) [2015-01 - 13 T 17: 06:51.196] (0) server started

  
  

  PSAPPSRV.2644 (0) [2015-01 - 13 T 17: 06:51.603] (0) PeopleTools version 8.54 (Windows) from. Tuxedo server is APPSRV 99/1

  PSAPPSRV.2644 (0) [2015-01 - 13 T 17: 06:51.603] (3) detected time zone is Pacific SA Daylight saving time

  PSAPPSRV.2644 (0) [2015-01 - 13 T 17: 06:51.665] (0) used Cache Directory: C:\PS _CFG_HOME\appserv\HC92\CACHE\PSAPPSRV_1\

  PSAPPSRV.2644 (0) [2015-01 - 13 T 17: 06:51.837] (2) App Server host lag is DB + 0 0:00:00 (ORACLE PSHRDMO)

  PSAPPSRV.2644 (0) [2015-01 - 13 T 17: 06:52.415] (0) server started

  
  

  PSSAMSRV.2832 (0) [2015-01 - 13 T 17: 06:52.728] (0) PeopleTools version 8.54 (Windows) from. Tuxedo server is APPSRV 99/101

  PSSAMSRV.2832 (0) [2015-01 - 13 T 17: 06:52.728] (3) detected time zone is Pacific SA Daylight saving time

  PSSAMSRV.2832 (0) [2015-01 - 13 T 17: 06:52.790] (0) used Cache Directory: C:\PS _CFG_HOME\appserv\HC92\CACHE\PSSAMSRV_101\

  PSSAMSRV.2832 (0) [2015-01 - 13 T 17: 06:53.087] (0) server started

  
  

  PSSAMSRV.2692 (0) [2015-01 - 13 T 17: 06:53.415] (0) PeopleTools version 8.54 (Windows) from. Tuxedo server is APPSRV 99/100

  PSSAMSRV.2692 (0) [2015-01 - 13 T 17: 06:53.415] (3) detected time zone is Pacific SA Daylight saving time

  PSSAMSRV.2692 (0) [2015-01 - 13 T 17: 06:53.493] (0) used Cache Directory: C:\PS _CFG_HOME\appserv\HC92\CACHE\PSSAMSRV_100\

  PSSAMSRV.2692 (0) [2015-01 - 13 T 17: 06:53.806] (0) server started

  
  

  PSRENSRV.2356 [2015-01 - 13 T 17: 06:56.743] (0) st PeopleTools version 8.54 (Windows) arting . Tuxedo server is RENGRP 92/101

  PSRENSRV.2356 [2015-01 - 13 T 17: 06:56.759] (3) switch to the new log file * C:\PS_CFG_H OME\appserv\HC92\LOGS\PSRENSRV_0113.LOG *

  
  

  PSADMIN.1088 (0) [2015-01 - 13 T 17: 07:13.698] (0) attempt to end HC92 field boot

  * C:\PS_CFG_HOME\appserv\HC92\LOGS\PSRENSRV_0113.LOG *.

  -Begin PSRENSRV boot-

  PSRENSRV.2356 (0) [2015-01 - 13 T 17: 06:57.273] (3) (NET.113): RenRequest customer service request succeeded

  PSRENSRV.2356 (0) [2015-01 - 13 T 17: 06:57.843] (3) (NET.113): RenRequest customer service request succeeded

  2356.2708 [2015-01 - 13 T 17: 07:02.075] (WARN) nsmain: off the server immediately asked

  ----------------------------

  SMOKING LOG FILE

  ----------------------------

  170634.PSOFT_PC! PSADMIN.1088: Start the start on domain HC92 attempt

  170639.PSOFT_PC! tmadmin.556.2400.-2: TMADMIN_CAT:1330: INFO: command: start - a

  170641.PSOFT_PC! tmboot.2392.2544.-2: 13/01/2015: Tuxedo Version 12.1.3.0.0_VS201 0, 64-bit

  170641.PSOFT_PC! tmboot.2392.2544.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is to t to 120 seconds

  170641.PSOFT_PC! tmboot.2392.2544.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected

  
  

  170643.PSOFT_PC! BBL.2340.1680.0: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64-bit, Patch level (none)

  170643.PSOFT_PC! BBL.2340.1680.0: LIBTUX_CAT:262: INFO: Standard master boot

  
  

  170645.PSOFT_PC! tmboot.1488.2464.-2: 13/01/2015: Tuxedo Version 12.1.3.0.0_VS201 0, 64-bit

  170645.PSOFT_PC! tmboot.1488.2464.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is to t to 120 seconds

  170645.PSOFT_PC! tmboot.1488.2464.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected

  
  

  170645.PSOFT_PC! PSWATCHSRV.1636.2816.-2: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64-bit

  170645.PSOFT_PC! PSWATCHSRV.1636.2816-2: LIBTUX_CAT:262: INFO: Standard main starting

  
  

  170645.PSOFT_PC! PSAPPSRV.2656.592.0: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64-bit

  170645.PSOFT_PC! PSAPPSRV.2656.592.0: LIBTUX_CAT:262: INFO: Standard main starting

  170651.PSOFT_PC! PSAPPSRV.2644.2804.0: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64-bit

  170651.PSOFT_PC! PSAPPSRV.2644.2804.0: LIBTUX_CAT:262: INFO: main starti Standardng

  170652.PSOFT_PC! PSSAMSRV.2832.2208.0: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64-bit

  170652.PSOFT_PC! PSSAMSRV.2832.2208.0: LIBTUX_CAT:262: INFO: main starti Standardng

  170653.PSOFT_PC! PSSAMSRV.2692.2668.0: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64-bit

  170653.PSOFT_PC! PSSAMSRV.2692.2668.0: LIBTUX_CAT:262: INFO: main starti Standardng

  
  

  170653.PSOFT_PC! PSANALYTICSRV.2448.2180.0: 13/01/2015: Tuxedo Version 12.1.3.0.0_VS2010, 64-bit

  170653.PSOFT_PC! PSANALYTICSRV.2448.2180.0: LIBTUX_CAT:262: INFO: main s Standardtarting

  170654.PSOFT_PC! PSANALYTICSRV.496.2476.0: 13/01/2015: Tuxedo Version 12.1.3.0.0_VS2010, 64-bit

  170654.PSOFT_PC! PSANALYTICSRV.496.2476.0: LIBTUX_CAT:262: INFO: Standard main stsurglace

  170655.PSOFT_PC! PSANALYTICSRV.2964.1536.0: 13/01/2015: Tuxedo Version 12.1.3.0.0_VS2010, 64-bit

  170655.PSOFT_PC! PSANALYTICSRV.2964.1536.0: LIBTUX_CAT:262: INFO: main s Standardtarting

  
  

  170656.PSOFT_PC! PSRENSRV.2356.2708.-2: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64-bit

  170656.PSOFT_PC! PSRENSRV.2356.2708-2: LIBTUX_CAT:262: INFO: key start Standarding

  
  

  170658.PSOFT_PC! PSMONITORSRV.1056.2212.-2: 13/01/2015: Tuxedo Version 12.1.3.0.0_VS2010, 64-bit

  170658.PSOFT_PC! PSMONITORSRV.1056.2212-2: LIBTUX_CAT:262: INFO: main s Standardtarting

  
  

  170658.PSOFT_PC! JSL.640.904.0: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64 -bit

  170658.PSOFT_PC! JSL.640.904.0: LIBTUX_CAT:262: INFO: Standard master boot

  170658.PSOFT_PC! JSL.640.904.0: INFO: version JOLT Jolt 12.1.1.0 Oracle Listener

  170659.PSOFT_PC! JSL.640.904.0: JOLT_CAT:1568: "INFO: threshold of Compression is tot-1000000 '

  170659.PSOFT_PC! JSL.640.904.0: JOLT_CAT:1242: ' ERROR: Bad Internet type listning address provided: //PSOFT_PC:9000 '

  170659.PSOFT_PC! JSL.640.904.0: LIBTUX_CAT:250: ERROR: tpsvrinit() failed

  
  

  170659.PSOFT_PC! tmboot.1488.2464.-2: CMDTUX_CAT:825: ERROR: process to PSOFT JSL _Pc failed with / t tperrno (TPESYSTEM - internal system error)

  170659.PSOFT_PC! tmboot.1488.2464.-2: tmboot: CMDTUX_CAT:827: ERROR: fatal error met, launch the user error handler

  
  

  170710.PSOFT_PC! BBL.2340.1680.0: CMDTUX_CAT:26: INFO: The BBL out of system

  
  

  170713.PSOFT_PC! PSADMIN.1088End attempt to boot on domain HC92

  -------------------------------------------------------------

  SETTINGS FOR THE DOMAIN

  ------------------------------------------------------------

  ----------------------------------------------

  Menu quick access - configure area: HC92

  ----------------------------------------------

  Characteristic parameters

  ==========                                 ==========

  (1) pub/Sub servers: No. 17) DBNAME: [PSHRDMO]

  (Server 2) Quick: No. 18) DBTYPE: [ORACLE]

  (Query servers 3): No. 19) user name: [PS]

  ((4) shock: Yes 20) UserPswd: [PS]

  ((5) Jolt relay: No. 21) Networkid: [TESTSERV]

  ((6) WSL: No. 22) AddToPATH: [C:\app\psoft\product\11.2.0\dbhome_1\BIN]

  (PC 7 debugger): No. 23) ConnectID: [people]

  (Event notification 8): Yes 24) ConnectPswd: [people]

  [(Serveurs de 9) MCF: No. 25) DomainConnectPswd:]

  (10 assembler) Perf: No. 26) Port of WSL: [7000]

  ((11) Analytics servers: Yes 27) JSL Port: [9000]

  (Bridge 12) areas: No. 28) Port of JRAD: [9100]

  (13) the server events: No.

  Actions

  =========

  (14) load config as shown

  (15) custom configuration

  (16) the settings of the environment

  (h) aid for this menu

  (q) to return to the previous menu

  TIP: Enter 17 to change DBNAME, then 14 to load

  Enter the selection (1-28, h or q):

  --------------------------------------------------------------

  ENVIRONMENT SETTINGS

  --------------------------------------------------------------

  C:\Users\psoft > set

  ALLUSERSPROFILE = C:\programdata

  APPDATA = C:\Users\psoft\AppData\Roaming

  CommonProgramFiles = c: files

  CommonProgramFiles (x 86) = c: Program Files (x 86) \Common Files

  CommonProgramW6432 = c: files

  COMPUTERNAME = PSOFT_PC

  ComSpec=C:\Windows\system32\cmd.exe

  FP_NO_HOST_CHECK = NO

  HOMEDRIVE = C:

  HOMEPATH = \Users\psoft

  JAVA_HOME = C:\Program Files\Java\jdk1.8.0_25

  JAVA_OPTS = "" - Dcom.sun.xml.namespace.QName.useCompatibleSerialVersionUID = 1.0 - Xms32 m - Xmx64m " "

  LOCALAPPDATA = C:\Users\psoft\AppData\Local

  LOGONSERVER = \\PSOFT_PC

  NUMBER_OF_PROCESSORS = 2

  OS = Windows_NT

  Path = C:\Program Files\Java\jdk1.8.0_25\bin

  ; C:\app\psoft\product\11.2.0\dbhome_1\bin

  ; C:\app\psoft\product\11.2.0\dbhome_2\bin

  ; C:\Windows\System32; C:\Windows

  ; C:\windows\System32\Wbem

  ; C:\Windows\system32\WindowsPowerShell\v1.0\

  ; C:\app\tuxedo\tuxedo12.1.3.0.0_VS2010\bin

  ; C:\app\tuxedo\tuxedo12.1.3.0.0_VS2010\jre\bin\server

  ; C:\app\tuxedo\tuxedo12.1.3.0.0_VS2010\jre\bin

  PATHEXT = .COM; EXE;. BEATS;. CMD;. VBS;. VBE;. JS;. JSE;. WSF;. WSH;. MSC

  PROCESSOR_ARCHITECTURE = AMD64

  PROCESSOR_IDENTIFIER = Intel64 family 6 model 58 Stepping 9 GenuineIntel

  PROCESSOR_LEVEL = 6

  PROCESSOR_REVISION = 3 a 09

  ProgramData = ProgramData

  ProgramFiles = c: Program Files

  ProgramFiles (x 86) = c: Program Files (x 86)

  ProgramW6432 = C:\Program Files

  PROMPT = $P$ G

  PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\

  PS_APP_HOME = C:\HC9.2

  PS_CFG_HOME = C:\PS_CFG_HOME

  PS_HOME = C:\PT8.54

  PUBLIC = C:\Users\Public

  SESSION = Console

  SystemDrive = C:

  SystemRoot = C:\Windows

  TEMP = C:\Users\psoft\AppData\Local\Temp

  TMP = C:\Users\psoft\AppData\Local\Temp

  TUXDIR=C:\app\tuxedo\tuxedo12.1.3.0.0_VS2010

  USERDOMAIN = PSOFT_PC

  USERNAME = psoft

  USERPROFILE = C:\Users\psoft

  windir = C:\Windows

  windows_tracing_flags = 3

  windows_tracing_logfile=C:\BVTBin\Tests\installpackage\csilogfile.log

  _JAVA_OPTIONS =-Xmx512M

  Found this post:

  ISNAT_CAT:1242: ERROR: Bad Internet type of listening address

  "The problem has been resolved after that I changed my name from ZEMEROV_A to ZEMEROV computer.

  Hyphens are not allowed for regular internet names. The only Microsoft DNS server

  allows hyphens. Obviously TUXEDO checks the internal Web address syntax.

  But I don't know why my IP (10.57.70.246) has failed.

  In any case, the issue is resolved. Make sure that TUXEDO documentation recommends-

  When using the name of the server host you talk server. This is case and sensitive syntax. »

  Where as: I changed my host name of psoft_pc to psoftpc and I changed the same on TNSNAMES and everything worked without problems.

  I'll mark this issue is resolved.

  Thank you.

• Error handling and the basic flow data

  Hello

  I'm learning the basic error data and flow management. The seal is a simple VI to implement this.

  How do I implement this code to display an error.

  Thank you.

  You must assign a value of your choice for the cluster of error - in errors generated by the LabVIEW functions, error is already assigned/etc, but to find user customized errors, the user must assign values.  Just make sure you do not use the same error values that LabVIEW uses for predefined errors. If you do a search for error codes, you will be able to find this error varies from code - so pick something that is not already used.

  And Yes - using an error handler would be a simple way to accomplish what you're trying to do. This error handler will appear a message error only if your feature will remain smooth.

  -DP

  BatchTest Corp.

  NEITHER Alliance Partner

• Return 200 status Code error handler

  Greetings,

  I have a section of my site assigned to be a "Error Handler", but when a user is brought to this page, the status code is a 200. As you can imagine, this has the potential to cause a lot of problems for processes that are based on work status codes.

  I found the following solution on another site, indicating to put that code Idoc Script at the top of the Page Template:

  <!-$setValue ("#local", "ssChangeHTTPHeader", "true") - >

  Unfortunately, doing the above does not work. Am I missing something?

  Any help is appreciated. Thank you!

  Josh

  I'm sure there's an easy solution here, but I can't find it on my box.

  Using Apache as a front end? They you could use mod_rewrite to redirect to a 404 page if a specific header exists in the answer. If you could put this on your error page:

  And then you have this in your Apache config file:

  RewriteCond% {HTTP:HTTP_FOUR_OH_FOURED}

  RewriteRule. * /not/ - found.htm [R = 404, L]

  More available here:

  mod_rewrite - Apache HTTP Version 2.4 Server

• Error: The user is not synchronized in the LDAP directory.

  Hello

  I have observed that the users imported via the load utility to bulk IOM does not get incorporated into the OID (as the configuration via LDAPSync). Additionally, when you try to change a users in the identity Console give me the following error message:

  IAM-2050243: process Orchestration with id 5436, failed with the IAM-3010059 error message: change failed because the user TSEMMENS is not synchronized with the LDAP directory.

  I need a manual task for this? or is it a mistake?

  Thank you

  Hello

  Because users are not present OID, so during change it will throw the error.

  Try running the following Scheduler:

  LDAPSync Post allow provision users to LDAP
  

  E.7 Provisioning of users and roles created before enabling the LDAP LDAP synchronization

  If you create users and roles in Oracle Identity Manager deployment without LDAP synchronization and decide later activate the LDAP synchronization, then the users and roles created prior to activation of the LDAP synchronization must be synchronized with LDAP after activation. The commissioning of the users, roles, the role memberships and hierarchy, role of LDAP is obtained by these regular positions predefined LDAP:

  • LDAPSync Post allow provision users to LDAP
  • LDAPSync Post Enable provision roles to LDAP
  • LDAPSync Post Enable provision of roles for LDAP group memberships
  • LDAPSync Post Select available role hierarchy in LDAP

  Allowing a LDAP synchronization in Oracle Identity Manager - 11g Release 2 (11.1.2.2.0)

  We'll see if it creates the entry in OID.

  ~ J

• ORA-01917: user or role ' OPS$ MSMIT110 ' does not exist

  Hi all

  I have a user OPS$ msmit110 in my database KONQ. I want to revoke create session privilege from this account. But when I try, I get error ORA-01917 same account already exists in the database. Here are the details:

  
  

  Konq > select name, open_mode from v$ database;

  NAME OPEN_MODE

  --------- ----------

  KONQ READ WRITE

  Konq > select username, account_status, profile from dba_users where username = ' OPS$ msmit110 ";

  USERNAME ACCOUNT_STATUS PROFILE

  ------------------------------ -------------------------------- ------------------------------

  OPS$ msmit110 OPEN ENDUSER_PROFILE

  Konq > select the BENEFICIARY, the PRIVILEGE of dba_sys_privs where DEALER = ' OPS$ msmit110 ";

  HOLDER OF PRIVILEGE

  ------------------------------ ----------------------------------------

  OPS$ msmit110 CREATE SESSION

  Konq > revoke create session to OPS$ msmit110;

  Revoke create session to OPS$ msmit110

  *

  ERROR on line 1:

  ORA-01917: user or role ' OPS$ MSMIT110 ' does not exist

  Please let me know the reason behind it and please help how can I solve this problem.

  Kind regards

  Michel

  > revoke create session to OPS$ msmit110;

  not as above but as below

  Revoke create session of "OPS$ msmit110";

• 12 c: ORA-65049: creating local user or role is not permitted in the CBD$ ROOT

  Last night, I installed Oracle 12 c on OEL 6.4. See Oracle Spatial installation and graph 12 c on OEL 6.4 .

  Today, I tried to create a test user following a syntax which worked for 11g but I got a permission error.

  $ sqlplus sys as sysdba

  SQL * more: Production of the version 12.1.0.1.0 Wed Jun 26 07:08:11 2013

  Copyright (c) 1982, 2013, Oracle.  All rights reserved.

  Enter the password:

  Connected to:

  Database Oracle 12 c Enterprise Edition Release 12.1.0.1.0 - 64 bit Production

  With the options of partitioning, OLAP, advanced analytics and Real Application Testing

  SQL > GIVING DBA, CONNECT, RESOURCE to STEVE IDENTIFIED BY dbl-secret-pwd;

  GRANT DBA, CONNECT, RESOURCE to STEVE IDENTIFIED BY dbl-secret-pwd

  *

  ERROR on line 1:

  ORA-65049: creating local user or role is not permitted in CBD$ ROOT

  Any ideas why I get this error in 12 c?

  Hello

  Its new, so I think that you must first create the PDB (plugable DB), then you can create user as part of the PDB not covered by the CBD (DB container),

• BI Apps 11.1.1.7: Regional coordinating unit failed to create DEV_DW user or role

  Hello
  
  I install the Oracle BI Applications 11.1.1.7 on Linux OS. While running the utility BI Apps RCU, after you select the components of Oracle BI Application and tablespaces and clicking Next, I get an error message: ORA-01917: user or role DEV_DW does not exist. I would like to mention that the dmp files have been copied to a globally accessible folder writable on the machine hosting the database server. Anyone faced with a similar question? Please let me know a workaround.
  
  Best regards
  Karamba.

  The database version is not a problem. We need to make it sufficient disk space to accommodate the set tablespace size. The error message is misleading, but then on checking space, disk and allocation of the smaller sizes for tablespaces the problem has been resolved.

• upgrade from 3.2 to 4.1 - error handling for the unavailable database links

  Hello
  
  I have a 3.2-> upgrade problem 4.1 associated with error handling for the damaged database links.
  
  I have a conditional button Exists on a page that contains a SQL query to related tables. However, for 10 minutes every day where the target of the link database becomes a cold backup, the query fails. In the apex 3.2 old, I just had an error within the region where the button is located but otherwise, the page was still visible:
  
  "Is not valid/not exists condition: ORA-02068: following a serious error of MYDBLINK ORA-01034: ORACLE not available ORA-27101: there is no shared memory realm."
  
  However, in the apex 4.1.0.00.32 I get the following unhandled error and click 'OK' brings me to the edit page when logged in as a developer.
  
  that is, the page cannot run at all so that the links to the database fail to this one area.
  
  Treatment of error condition.
  ORA-12518: TNS:listener could not hand off client connection
  Technical information (only visible for developers):
  is_internal_error: true
  apex_error_code: APEX. CONDITION. UNHANDLED_ERROR
  ora_sqlcode:-12518
  ora_sqlerrm: ORA-12518: TNS:listener could not hand off client connection
  Component.type: APEX_APPLICATION_PAGE_REGIONS
  Component.ID: 4
  Component.Name: alerts today
  error_backtrace:
  ORA-06512: at "SYS." WWV_DBMS_SQL', line 1041
  ORA-06512: at "APEX_040100.WWV_FLOW_DYNAMIC_EXEC", line 687
  ORA-06512: at "APEX_040100.WWV_FLOW_CONDITIONS", line 272
  
  Users generally see this:
  
  Treatment of error condition.
  ORA-01034: ORACLE not available ORA-02063: preceding the line of MYDBLINK
  
  by clicking on 'OK' takes the user to another page, don't know how the Summit decides that, but not a concern at the moment.
  
  I did a search and read the http://www.inside-oracle-apex.com/apex-4-1-error-handling-improvements-part-1/ page, but the new apex error handling is not clear to me, and I don't know if the apex_error_handling_example provided on this page would be applicable to this situation.

  Hello

  It was my fault, I forgot that the code will be compiled on the fly which already fails if the table/view of deletion is not accessible. Nice that you found yourself workaround.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• What is your strategy to find errors that are not triggered by the WebService error handler?

  Is there a way to underride the default functionality of WebService.as? I can't find the source code in the SDK, so I guess that this part of Flex is not Open Source.
  
  I find that the use of Web services there are many errors that potentially happen that I can't capture in the user interface. Alternatively, let me rephrase, I couldn't find a way to capture in the user interface.
  
  For example, the error message "Unable to load the WSDL" following occurs. Now, I could probably design a strategy all about check that the connection is still alive and these, but then I saw the other errors that occur in the WebService base classes that are all asynchronous licensees.
  
  Is it possible to add a default handler than capures these types of errors? (They aren't catches by FaultHandlers).
  
  I can't have a user interface that displays the large white box to end-users with a stack trace. Thank you.
  
  [FaultString = "Unable to load the WSDL" RPC error faultCode = "Server.NoServicesInWSDL" faultDetail = "no < wsdl:service > element in WSDL to." "]
  to mx.rpc.wsdl::WSDL/getService() [E:\dev\flex_3_beta3\sdk\frameworks\projects\rpc\src\mx\rpc \wsdl\WSDL.as:256]
  to mx.rpc.wsdl::WSDL/getPort() [E:\dev\flex_3_beta3\sdk\frameworks\projects\rpc\src\mx\rpc\ws dl\WSDL.as:182]
  to mx.rpc.soap::WebService/ http://www.adobe.com/2006/flex/mx/internal:wsdlHandler () [E:\dev\flex_3_beta3\sdk\framewor ks\projects\rpc\src\mx\rpc\soap\WebService.as:267 ]
  at flash.events::EventDispatcher/dispatchEventFunction()
  at flash.events::EventDispatcher/dispatchEvent()
  to mx.rpc.wsdl::WSDLLoader/checkLoadsOutstanding() [E:\dev\flex_3_beta3\sdk\frameworks\projec ts\rpc\src\mx\rpc\wsdl\WSDLLoader.as:195]
  to mx.rpc.wsdl::WSDLLoader/resultHandler() [E:\dev\flex_3_beta3\sdk\frameworks\projects\rpc\s rc\mx\rpc\wsdl\WSDLLoader.as:173]
  at flash.events::EventDispatcher/dispatchEventFunction()
  at flash.events::EventDispatcher/dispatchEvent()
  to mx.rpc::AbstractInvoker / http://www.adobe.com/2006/flex/mx/internal:dispatchRpcEvent () [E:\dev\flex_3_beta3\sdk\fra meworks\projects\rpc\src\mx\rpc\AbstractInvoker.as:175 ]
  to mx.rpc::AbstractInvoker / http://www.adobe.com/2006/flex/mx/internal:resultHandler () [E:\dev\flex_3_beta3\sdk\framew orks\projects\rpc\src\mx\rpc\AbstractInvoker.as:198 ]
  at mx.rpc::Responder/result() [E:\dev\flex_3_beta3\sdk\frameworks\projects\rpc\src\mx\rpc\Res ponder.as:48]
  at mx.rpc::AsyncRequest/acknowledge() [E:\dev\flex_3_beta3\sdk\frameworks\projects\rpc\src\mx \rpc\AsyncRequest.as:81]
  to DirectHTTPMessageResponder / completeHandler ([E:\dev\flex_3_beta3\sdk\frameworks\projects\ rpc\src\mx\messaging\channels\DirectHTTPChannel.as:387])
  at flash.events::EventDispatcher/dispatchEventFunction()
  at flash.events::EventDispatcher/dispatchEvent()
  at flash.net::URLLoader/onComplete()
  

  I discovered the programmers, that when I do not use the debug version of the player that those mistakes should properly propagate to the error handler.

• Yahoo solution DNS error handler

  I tried to go through all the things I could find after searching it upward. Most links, pages (for example, my Bank) and same plugin page is just finish on this DNS sokution yahoo error handler. It happened after the most recent update, and it really bothers me. more than 50% of the time, I have to change to another browser just because of this.

  Hello, randomn, you probably have an extension that modifies searchers, try Firefox Safe Mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Mac: Hold the option key during the startup of Firefox.

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

  Thank you

• Receive a DNS Solution Yahoo error handler Page and some pages are not displayed

  I recently downloaded the Stuffit Expander and since then Firefox has not been the same. I get a DNS Error Handler Solution Yahoo page, when I do a search sometimes. And now, some pages don't display even for me when they should. How can I get rid of this thing of Yahoo (in simple terms please)? Thank you!

  You can have an unwanted extension that modifies researchers. Try this:

  Disable all non-essential or unrecognized extensions on page modules. Either:

  • Command + shift + a
  • Tools menu > Modules

  In the left column, click Extensions. Then, when in doubt, turn off. (Or if it is obviously the badware, delete).

  Typically, a link will appear above at least an extension disabled to restart Firefox. You can complete your work on the tab and click one of the links in the last step.

  Who help me?

  Note that when you search from the address bar of Firefox, searches that contain no spaces are checked as possible (e.g., intranet or my.web.server) server names. Most of the servers DNS don't report just "no server" and Firefox bounces the query to Google. However, some DNS servers say Firefox, they found the site and display the search results. This could be what you see. If it is new, maybe your DNS servers have been changed? (Don't know how to check on Mac).

• I can't open my Dungeon of docs word any error message "user lacks access privileges.

  I can't open my imported word docs Dungeon receive an error message 'user lacks access privileges' ideas of what she may be contacting Apple and they tried a lot of things and tell Microsoft that the docs are corrupt and nothing wrong with the word 2016.

  More info, please.

  When you say that it is "any word docs", do you mean another user on the same Mac, another Mac, an earlier version of Mac OS X, an earlier version of Word, another type of computer, from another type processor, or something else?

  These documents are currently stored in your Documents folder, into another directory user on an external drive, on a server, or elsewhere?

  You do it on El Capitan? What version of 10.11.x?

  Your copy of the word 2016 is perfectly up to date?

• find errors returned by the error handler simple vi

  When running the application in the development environment and after the application of the error handler code, I found would be Manager of simple errors that VI is a few errors which I do not know where on the block diagram the source code. Is it possible to find it?

  Kind regards

  I think I have strength to my self more clear in my post earlier. So here's the explanation:

  I have a few variant to the data functions in the while loop of a block diagram. When I now run my code after the implementation of the code of error handler I get errors. One of the ways I could think now to find which variant of function data is wired content type incorrect data is to run the vi Analyzer and find in the report generated by the vi Analyzer.

  Lets see how it goes.