Error running 7 activation key Machine virtual parallels

Similar Questions

• Core i7 - both vmware and hyper V not running any X 64 Machine virtual (X 32 VM Client works on vmware Xp/vista) built on Windows Server 2008 X 64 basic

  The vmware and hyper V not running any X 64 Machine virtual (X 32 VM Client works on vmware Xp/vista) built on Windows Server 2008 X 64 Basic.

  Windows (pre install UI) error code install (0xc000035a) that the processor does not support X 64 Mode

  Any of that with core i7 system any help would be much appreciated, thanks

  -Software VMware Server 2.0.0 122956 - OR - VMware Workstation 6.5.1 126130 - OR- Microsoft Hyper V

  -Tried - BONE at BASE of MATERIAL AND the VM ENVIRONMENT

  X 64 Windows Server 2008 6001 - OR - X 64 Windows Server 2008 6002 - OR - X 64 Server Windows 7 6801

  System - Core i7 920 + X 58 (GA-EX58-UD5) + 6 GB DDR3 + OCZ SSD

  Intel Core i7 920 Webpage - http://www.intel.com/products/processor_number/chart/corei7.htm

  Gigabyte GA-EX58-UD5 - latest version of the Bios F3

  Web page - http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ClassValue=Motherboard & ProductID = 2958 & ProductName = GA-EX58-UD5

  Advanced features of MB Bios CPU - tried Both ON and OFF

  Hyper Threading - Threading 4 AND 8

  Intel Virtualization - ENABLE AND DISABLE

  Looked in the VM Bios as well

  6 GB DDR3 3X2GB 1600

  Please, see troubleshooting problems of Intel VT - x.

  Also note that you can not the role Hyper-V installed in the parent partition, if you want to run the VMware using VT products, as Hyper-V virtualizes the parent partition, but it only virtualizes the VT CPU features.

• Windows 7 not recognized as true after reinstalling on one machine virtual Parallels Desktop

  Hi all -

  I'm a Mac user running Windows 7 on my virtual machine (Parallels Desktop).  I did for years, even the upgrade to Windows 7 after using XP for a long time.
  Recently, I had a problem with the upgrade of Parallels Desktop, which could only be repaired by removing and then reinstalling the Virtual Machine Parallels.  This, of course, obliged me to reinstall all programs (including Windows 7).  Since I bought my Windows 7 and Office 2010 at Staples (Yes... not online or eBay copy here), I know that my copies are authentic and I used Winows 7 for the years leading up to this relocation.  I still have the original case, the disks and the sticker with the product key.  I used this key when I did the re-install and everything worked perfectly... until today when I turned on the virtual machine and he asked for me to enter the product key, say something (I'm sorry I didn't write that down) on the exhale.  I got my key, Windows 7 came out, but it is said that "this copy of Windows is not genuine" I get message "you can be a victim of software counterfeiting".  Once again... I bought full fare at Staples, so I do not know is not the case.
  Any suggestions?
  Thanks in advance for your help.

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Error: Running VMware ESX in a virtual machine requires the external virtual machine

  We are running ESX Vmware 5 on a virtual test in ESX 4.x environment and machine unable to start the virtual machine on Vmware ESX 5. with the following error.

  Error: -.

  Running on a virtual machine VMware ESX requires the external virtual machine is configured to run a VMware ESX guest operating system. You can not power on a virtual machine until the external virtual machine is reconfigured.

  We found after KB

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1030283

  Howerver, I'm not able to find the option

  1. Select the virtual machine that is running ESX.
  2. Go in VM > Settings.
  3. Click the Options tab.
  4. Select the General settings.
  5. Under Guest operating system , select VMware ESX.
  6. Click OK.

  We are not able to find this option in ESX 4, so we can run this VM.

  Please help urgently...

  Kind regards

  The log file looks good now.  However, it seems that ESX 4.0 is older than I remembered.  Please, add the following line to your ESX VM configuration file and try again:

  monitor_control.restrict_backdoor = TRUE

• Error in product activation key Windows 8 0xC0000022 / 0xC004F012 & more...

  Hello everyone.

  I've been running Windows 8 for almost a year now.  Authentic, active, copy no problem whatsoever.  So after some personal problems with security, last week, I did a factory re install my Windows 8 X 64 system with high hopes.

  All I get is the Windows Activation arise regularly, but when I try to activate Windows, error 0XC0000022 code appears. (PARAGRAPH 1).
  Tried to activate by phone, but I do not have Installation ID slui 4 being listening off too.

  Ran 'SLUI 3', product code entered, only to get "could not verify that key, then try another. (SS 2)

  Even tried as mentioned, SLUI 4, enter "Denmark" and new 0XC0000022 (SS-3), then a window with no installation ID

  

  

  

  So, after a lot of research and searching the Internet for a solution possible, I got to try some solutions without success.

  I tried to launch a recommended cmd

  sfc/scannow

  

  and this is what I have... online or not

  So I tried the next best thing I knew 'The MGADiag tool' only to be again disappointed by this screen

  

  and that's where he suddenly became chaotic, cause now, I got a new error then look up.

  Apparently, this problem occurs when some files in the update of Windows are missing, even if the update is downloaded and extracted successfully.

  "" So I quickly discovered a fix recommending'Troubleshooting Windows Update tool "fix Microsoft ' and tried, with a real outcome, for the first time since a started with that, a week ago. It looks like this

  

  Here I am through, Yes! Finally and I keept going on with the recommended steps, which mentioned a 'Refresh your PC without your files' so I did, only to be disappointed again 2 hours later... by (SS1) error 0xC0000022

  Without all the other tracks, so I started poking around in my control panel, just to be surprised by that too... What, my Windows is active, but not active? huh

  

  When it clearly States in 'view details of activation' ' NOT AVAILABLE ' a click later

  

  and yet once, click later on this page, I was tempted to look at the details "activation" that lead me to this screenshot for you guys

  

  Error code:

  0xC004F012

  The software Licensing Service reported that the call failed because the value of the entry key was not found.

  Now, this is where I get really confused, because now we have 3 error codes listed... and am honestly lose trust in all these solutions, but cela a seams to be the problem... It turns out that this error pops up when something is wrong with your 'Software Protection service' in Services.msc. So I checked out and Yes really enough...

  Software protection service does not work! explains that I come back with all the other services are in effect, including the activation of Windows associated with those. So start it leaves are we going?

  

  Access is denied? Hmm what a surprise. Pretty much identical to the previous error 0xC0000022. Which means normally is wrong with my permissions as access should not be denied... So I went to the next logical place... Properties to verify permissions and Yes, really everything is grey like this

  

  AHA I got through and I found myself quickly sppsvc.exe file in my Windows dic. and changed all the permissions for FULL CONTROL. Only to return to the exact same small screens.

  Now, here, I'm a week later, with a lot of knowledge, but no real results... really confused and embarrassed... So, I really hope that someone out there is smart enough to offer an adequate solution for this.

  PLEASE DON ' T BOTHER IF YOUR JUST SOME MOD WITH A USELESS FANCY COPY PASTE TO THE SHOW... I NEED HELP, NOT A FANCY FILLERS.

  OK, I don't usually answer and try to help, but as I spent so much time researching this issue after experiencing the same issue here, it will:

  This solution worked for me on Windows 7, it has not been tested on Windows 8, but it worked for me after I have tried all the same steps that the poster original, nothing helps.

  The problem is the Software Protection service, and is unable to start as you found it from the beginning.

  Step 1. Open an administrative command prompt.

  Step 2. Copy and paste the following command into your command prompt, and press to enter. This properly resets the permissions on the service:

  ICACLS % windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareProtectionPlatform/Grant, "BUILTIN\Administrators: (OI) (CI) (F)" "NT AUTHORITY\SYSTEM: (OI) (CI) (F)" ' NT Service\sppsvc: (OI) (CI)(R,W,D) "," NETWORK SERVICE: (OI) (CI) (F)»»»

  Step 3. Open Windows Explorer and navigate to %windir%\System32

  Step 4. Make sure you can see hidden and system files and folders.

  Step 5. Delete all the files/folders with the following name (you can move them to a folder to archive instead of delete them if you want to be sure):

  7B296FB0-376B-497e-B012-9C450E1B7327-5P-0.C7483456-A289-439d-8115-601632D005A0

  Step 6. In your Windows Explorer window, navigate to:

  %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareProtectionPlatform\

  Step 7. Tokens.dat and rename it tokens.bak

  Step 8. Try to start the Software Protection service. It should start successfully today. If he does then restart the computer and try to activate Windows again.

  Thanks to Craig Garland and Santosh Bennett for their positions on the Technet site on the Software Protection service which lead me to this response.

• Activation key is already in use error

  Dear members,

  I bought Win 8 online and installed on a laptop that I was using. Later, I formatted the hard drive of this laptop and sold and bought a new. When I tried to activate the engine on the new laptop, it gave error that your activation key is already used to activate. I know that my copy of windows to be used elsewhere. How can I activate my windows 8 on the new PC?

  Thanks for the reply, it is a retail purchase, I called the online support and they give me some numbers that I entered and windows has been activated.

• I installed windows 7 on a mac with boot camp and then used parallels to create a virtual machine to run windows inside Mac os10.6. Now he says I need to activate windows again, but he said I need a new activation key. Any ideas would be appreciated

  I installed windows 7 on a mac with boot camp and then used parallels to create a virtual machine to run windows inside Mac os10.6.  Now he says I need to activate windows again, but he said I need a new activation key.  Any ideas would be appreciated

  Yes, you must purchase a full license for the second installation of Windows 7 product key.  1 activation allows only one Windows 7 product key.  Apparently, you now have a second facility that requires a second product key. Carey Frisch

• Getting the error: the requested lookup key was not found in any active account activation context

  I can't run windows update. I get this error: the required search key not found in any active account activation context.

  I use XP.

  You are at least 6 months behind on updates to security critical. (Arrived Tuesday, 08 February, you'll be 7 months behind.)

  Your computer must NOT be connected to the internet (or any what local networks) in its current state. All your personal data (including passwords online banking & credit) must be considered at risk, if not already compromised.

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Follow the instructions in this post of mine in another forum (to-the-letter & in order!) to restore your computer to a State safe & functional: http://aumha.net/viewtopic.php?f=62&t=44636

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/xprepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Wish I had better news for you.  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• -Problem of activation Microsoft Office on new machine virtual Windows Vista

  I use a MacBook Pro on which I have just updated the Parallels Desktop virtual machine software.  This software has removed the earlier version (doesn't give me a notice, unfortunately, so my Office software deleted it from the virtual machine image).  Now, when I try to run office software in the virtual machine running Vista, I get a notice I need to activate the software.  When I try to activate online, I get a message that I've already activated all copies that I am allowed.  When I try to activate by phone, I'm going to "activate by phone" in the activation wizard, press the 'next' button, but then the activation wizard stops without giving me the phone number.  Help!

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Office.misc&lang=en&CR=us

  Discussions of general issues of the Office.

  They will help you with your office questions in the newsgroups Office above.

  See you soon.

  Mick Murphy - Microsoft partner

• How a machine virtual windows xp running on a system 32-bit windows 7 with Server 7.1.1 license

  Not too long ago, I bought a desktop computer with windows xp sp3.  I recently bought and installed a windows 7 32-bit operating system.

  I want to run a windows xp sp3 virtual machine in vmware workstation 7.1.1. What I have to buy an additional xp license or can I use the provided when the system was purchased orginall.  If so, how can I get the activation key?

  If someone has done this, any help would be appreciated.

  If Windows is supplied with the equipment, it is an OEM version. You are not allowed to install than on any other hardware (same virtual) than that, it was sold with.

  Check here: http://www.microsoft.com/About/Legal/EN/US/IntellectualProperty/UseTerms/Default.aspx

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• XP Pro error message "requested lookup key is not found in any active activation context" appears

  XP Pro error message "requested lookup key is not found in any active activation context" displayed when some Start Menu options are selected or whatever it is run from command run. IE will not start. Windows Update ran at the last stop, but site selection are not displayed. Tried to repair XP Pro upgrade disk. Reinstalled SP3. The IE7 installation fails during the installation of updates. Cannot find the Activation Assistant. Help!

  This should certainly guide you in the right direction http://forums.techguy.org/web-email/839381-solved-requested-lookup-key-not.html

• I am trying to change my product key and get a 0x800402c9 error when I run the product key Wizard

  Update product key

  I'm trying to change my product key and get a 0x800402c9 error when I run the product key Wizard, so I am unable to enter the product key

  You must acquire the recovery discs right from the manufacturer - if you're lucky, your office don't reinstall it properly and leave you with the recovery partition that would do the same job.

  Read your manual, on the recovery of the system and try the options there.

  If they do not work, you will need to contact it manufacturer and order a set of htem recovery disks.

• Activation after formatting problems. Has encountered an error that my product key is already in use.

  I bought Windows Vista Home Basic in April 2008. Order number: 1000831652. I have the electronic invoice and original original DVD. I had also activated my product then. Later, I installed SP1 and SP2, and regular updates.

  Three months ago I formatted my HDD and reinstalled Windows, SP1 and SP2. However, could not activate my windows. Error message says "PRODUCT KEY ALREADY IN USE. So I re-formated and reinstalled Windows - but received the same error message while activating. I repeated the format routine - install three times during the last three months, but the same result while activating - "PRODUCT KEY ALREADY in USE.

  I also tried activating by phone but no results there either. Kindly help me to activate and register my product.

  Kind regards

  Gopal Iyer

  Use the Activate by phone and speak to an operator.

  activation by telephone (call of the operator)
  Click the Start button
  in the search box, type
  SLUI 4
  and press the Enter key
  Follow the instructions, but when asked what service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you

• I encounter the error (can not open key: HKEY_local_machine32\software\microsoft\windows\currentversion\run...) during the installation of iTunes and QuickTime on my laptop.

  I encounter the error (can not open key: HKEY_local_machine32\software\microsoft\windows\currentversion\run...) when installing iTunes and QuickTime on my laptop (Windows 7, 64-bit operating system).  Tried to change the registry key to make sure that I had (full control) in the registry key main (HKEY_local_machine\software) and all of its subkeys (including \Wow6432Node and \Microsoft) and restarted my PC.  But I still get the same error message.  What Miss me?

  ORiginal title: HKEY_local_machine32\software\microsoft\windows\currentversion\run

  I tried all the advice support online from Apple without success.  Then I called Apple support and they want to charge me a fixed fee of $19.95 to Troubleshoot modifying registry keys with me.  I refused, and this is why I post this question on the Microsoft Forum.

  Did you follow this advice?

  "Did you download and save iTunes on the desktop > then right click > select run as administrator to install.

  And do you have displayed in iTunes community that is free to do?

  Ask the question in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

• Activation of Windows7 get error 0xc004c020 "the activation server reported that the Multiple Activation key has exceeded its limit."

  I installed Win7 Pro 64 - bit about 4 - 5 times with the same original key on the same computer, but now I have a problem; When I want to activate key, always error has occurred with this 0xC004C020 with description error Code: the activation server reported that the Multiple Activation key has exceeded its limit. How do I fix this problem?

  Hello

  Please find your resolution from this link: http://technet.microsoft.com/en-us/library/ff793399.aspx

  MAKs by design have a limited number of activations. Contact the Microsoft Activation call center.

  Hope that helps.

  Kind regards

  Joel