error in the activation of the membership

Similar Questions

• I can print Microsoft Word and Excel documents, but I am not able to print from the web. I get an error message that says: "Activation - Code 20' - error"Printer Not Activated".

  Activate printer F4580

  I run Microsoft Vista.  I have a printer HP F4580.  I can print Microsoft Word and Excel documents, but I am not able to print from the web.  I get an error message that says: "Activation - Code 20' - error"Printer Not Activated".  What should I do to correct this?

  Hello

  ·          What browser do you use to connect to the Internet?

  The error may occur if the wrong printer is set as default, the printer driver printer is missing, or if there are conflicts in Device Manager.

  Step 1: Make sure that the desired printer is set as the default printer:

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

• Wake up the computer with Vista from standby mode, get error SL08-010 Activation exploit

  'Error SL08 - 010 Activation Exploit' is what was on my screen when I woke from my comp to sleep mode.  The small print at the bottom of the page says that if that has not been fixed that I wouldn't be able to use my Windows Vista without putting my computer at risk. How can I fix this prob?

  Hello

  see if this information in the thread below helps you

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/SL-08-010-activation-exploit-warninghow-to-solve/44149728-8e5d-E011-8dfc-68b599b31bf5

• Activation of Windows7 get error 0xc004c020 "the activation server reported that the Multiple Activation key has exceeded its limit."

  I installed Win7 Pro 64 - bit about 4 - 5 times with the same original key on the same computer, but now I have a problem; When I want to activate key, always error has occurred with this 0xC004C020 with description error Code: the activation server reported that the Multiple Activation key has exceeded its limit. How do I fix this problem?

  Hello

  Please find your resolution from this link: http://technet.microsoft.com/en-us/library/ff793399.aspx

  MAKs by design have a limited number of activations. Contact the Microsoft Activation call center.

  Hope that helps.

  Kind regards

  Joel

• How to deal with "error: check the activation.

  I have the 4.5 digital editions on my Windows 7. Download books on my reader Kobo was a battle of the day 1. Now, I get "error: check the activation. As suggested, I'm trying to allow out of my player in order to re - authorize but ADE refuses my password. Any help would be appreciated.

  Windows:

  Close all applications.

  Click Start > run.

  Open, type regedit in the text box and press ENTER. The Registry Editor opens.

  In the left pane of the registry editor, locate the following registry key: HKEY_CURRENT_USER\Software\Adobe\Adept

  Select the key of the follower.

  Choose file > export.

  In the export registry file dialog box, select the branch selected under export range. Enter a name and location for the backup registry key, and then click Save.

  Right click on the key to the follower, and then choose Remove.

  In the dialog box confirm the key deletion, click OK.

  Close the registry editor.

  Open Adobe Digital Editions and reauthorize.

  Macintosh:

  exit the Adobe Digital Editions software.

  Navigate to / Users / / Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash.

  If you use 10.7, see https://helpx.adobe.com/x-productkb/global/access-hidden-user-library-files.html

  Open Adobe Digital Editions and reauthorize.

• When you try to download a book from my library, I get the error message: error: check the activation.  What should I now please?

  When you try to download a book from my library, I get an error message: error, check activation.  What should I now please?

  Hi 7Philip1116,

  Using the Adobe Digital Editions software? If so, I suspect that you meet one of the known activation errors. Often, deactivation and reactivation (cmd-shift-D on Mac) or ctrl-shift-D Windows will solve the problem. Instructions step by step, but also other possible solutions are available here: Errors of Activation

  If it is not a question of Digital Editions or if the advice above do not resolve your problem, please respond with a few more details so that we can better solve the problems. What software Adobe are you use and the type of device/operating system? Can you provide a screenshot of the error? The specified item was not found.

  Best,

  Del

• ADE 4.5.126523 update / error message "error!" Check Activation"by borrowing books from the digital library on the web

  ADE Update 4.5.126523

  Error message " " Error! Check Activation" " by borrowing books of the Digital library on the web.

  Can't read my books borrowed ;-(((

  ADE I uninstalled and installed once again yesterday.

  Only http://fr.feedbooks.com/publicdomain on the link, I read the books!

  Adobe, solution Quick Please

  I found the answer thanks Nancy!

  See: https://forums.adobe.com/thread/2016296

  1. Close all applications.
  2. Click Start > run.
  3. Open, type regedit in the text box and press ENTER. The Registry Editor opens.
  4. In the left pane of the registry editor, locate the following registry key: HKEY_CURRENT_USER\Software\Adobe\Adept
  5. Select the key of the follower.
  6. Choose file > export.
  7. In the export registry file dialog box, select the branch selected under export range. Enter a name and location for the backup registry key, and then click Save.
  8. Right click on the key to the follower, and then choose Remove.
  9. In the dialog box confirm the key deletion, click OK.
  10. Close the registry editor.
  11. Open Adobe Digital Editions and reauthorize.

• I downloaded the latest version of the DNG Converter Camera Raw version 9.1.1 for windows. However, I get error install the update saying "error opening file for writing. Also on my help menu updates is not active?

  I downloaded the latest version of the DNG Converter Camera Raw version 9.1.1 for windows. However, I get error install the update saying "error opening file for writing. Also on my help menu updates is not active?

  If the installation program itself fails to open and run. Download it again maybe your current download is corrupted. Also, what OS you are using and you are an administrator with permission to install.

• Creating custom activity (service DSC)... but get errors during the startup of service in workbench

  Hello

  I have hands on development of the process. So I started to create a custom activity.

  I created an activity that takes input and gives a string after some calculations. But the program requires additional jar files that are included in the lib folder in my java project.

  I exported java project as a jar file and installed successfully in the workbench. But then that starts the component... get the error like:

  Caused by: java.lang.ClassNotFoundException: No. ClassLoaders found for: net.fortuna.ical4j.model.Date
  at org.jboss.mx.loading.LoadMgr3.beginLoadTask(LoadMgr3.java:212)
  at org.jboss.mx.loading.RepositoryClassLoader.loadClassImpl(RepositoryClassLoader.java:514)
  at org.jboss.mx.loading.RepositoryClassLoader.loadClass(RepositoryClassLoader.java:408)
  at java.lang.ClassLoader.loadClass (unknown Source)
  at org.ungoverned.moduleloader.ModuleClassLoader.findClass(ModuleClassLoader.java:291)
  at org.ungoverned.moduleloader.ModuleClassLoader.loadClass(ModuleClassLoader.java:164)
  at java.lang.ClassLoader.loadClass (unknown Source)
  at java.lang.ClassLoader.loadClassInternal (unknown Source)
  ... more than 117

  You will find a complete description of the error in the attachment. LC hope does not have the jars in the lib.

  Because of this error, I'm not able to go forward.

  I have to add / include the required jars in LC?

  Please guide me how to solve this error.

  Waiting for your response.

  Thank you

  Praveen

  Put the jar into the lib of the appserver folder is a way to get the class when running, but not all sites will let you do this because you simply put at the disposal of all works on the appserver.  In addition, now that you move your dsc to test to staging to production, you must remember to move the jar as well.

  The alternative is to include the jar in your DSC and referencing it in the classpath of node in the component.xml file.

  Just cash how the DSCs distributed it (adobe-remoteevents-dsc Watch 2 pots to the package root and both are referenced in the classpath of the component.xml.

  Jon

• can I use illustrator cc on different laptops as soon as I bought the membership

  an i use illustrator cc on different laptops, once I purchased the membership

  Hi Birdieblue,

  You should find the answer to your question in the sign out or turn off section of this page: error 'limit reached activation' or 'connection failed ' | Adobe products.

  I hope this helps.

  See you soon,.

  David

• While trying to install SP1a for Windows XP, the error is the following: server has not responded (Windows XP SP1a).

  Hello

  Recently, I reformatted and reinstalled windows XP on my old laptop. Looking to obtain service packs for it, I read that you need to start with SP1a... I did some research autour and many people are having the same problem, but nobody responded to the real problem. According to Microsoft, I install SP1a to install any other. The error is as follows: the server did not respond. If the server has been taken down or refuses connections. My internet connection remained active all attempts to access the server.
  Unless the information is wrong on the website, installation of SP3 won't fix it. All responses I've seen to this problem have been installing something you can't until you install first.
  Here is the link, in that it tries to connect:
  Connection to
  http://xpSP1.Microsoft.com/ISAPI/pstream3.dll/XP/SP1.USA.1106a.
  Here's the exact error:
  "The following error occurred during the installation of the Service Pack 1a attempted to download the files from the Service Pack 1 from the internet:
  The server did not respond. »
  Thank you.

  You should be able to download the Service Packs as a standalone installer at the following addresses:

  SP1a: <> http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=19751 >
  SP2 <> http://www.microsoft.com/download/en/details.aspx?id=28 >
  SP3 <> http://www.microsoft.com/download/en/details.aspx?id=24 >

  If you can not download to your computer, then use another machine to download the installation file and move it to your computer.

  You don't need to install SP1A.  XP Gold, you must install SP1A or SP2 before installing SP3.  I recommend that you start with SP2 and then SP3.

  "How to obtain the latest Service Packs for Windows XP"
    <>http://support.Microsoft.com/kb/322389 >

  HTH,
  JW

• 674SideBySide errors in the observer of events in 6 months

  In the windows event viewer, he recorded 674 sidebyside errors at the time of this post, and this computer is less than a year.  I got a lot of error messages and crashes over the last month or two, so I'll try to track down each only one error at a time, starting with those who have higher numbers.  All errors seem to be linked to the microsoft works, Installer, but I never touch microsoft works, and I can't find something that has listed as a start-up program.

  That's what said event viewer on each of them.

  Activation context generation failed for "C:\Windows\Installer\{67E03279-F703-408F-B4BF-46B5FC8D70CD}\WksWP.exe." Load Assembly msadctls, processorArchitecture = "x 86", type = "win32", version = "1.0.1801.0" was not found. Please use sxstrace.exe for detailed diagnosis.

  Activation context generation failed for "C:\Windows\Installer\{67E03279-F703-408F-B4BF-46B5FC8D70CD}\wksss.exe." Load Assembly msadctls, processorArchitecture = "x 86", type = "win32", version = "1.0.1801.0" was not found. Please use sxstrace.exe for detailed diagnosis.

  Activation context generation failed for "C:\Windows\Installer\{67E03279-F703-408F-B4BF-46B5FC8D70CD}\wksdb.exe." Load Assembly msadctls, processorArchitecture = "x 86", type = "win32", version = "1.0.1801.0" was not found. Please use sxstrace.exe for detailed diagnosis.

  Activation context generation failed for "C:\Windows\Installer\{67E03279-F703-408F-B4BF-46B5FC8D70CD}\WksCal.exe." Load Assembly msadctls, processorArchitecture = "x 86", type = "win32", version = "1.0.1801.0" was not found. Please use sxstrace.exe for detailed diagnosis.

  
  

  Its just these four, more and more, hundreds of times.

  
  

  Hello

  Open the prompt with administrator rights, and run the following command:

  SxsTrace Trace - logfile:SxsTrace.etl

  Now run the program that is causing the message. Back at the cmd prompt, press ENTER to generate the SxsTrace.etl. Now use the command to generate a text below in the format of output file.

  sxstrace Parse - logfile:SxSTrace.etl - outfile:SxSTrace.txt
   
  Through the generated text file should provide details on each of the loaded modules and links.

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Windows Vista firewall problems. Error 1068: The dependency service or group

  When I try to Active my windows firewall I get
  the following message appears:

  "Windows Firewall settings cannot be displayed because the associated.
  service is not running. You want to start the windows firewall service? »

  The yes/no option.

  If I clicked 'Yes', another message appears saying:

  "Windows cannot run the Windows Firewall service.

  Okay, so I'm trying to start this service. I looked at the service
  status and stopped her, so I guess it must be started, if I click on
  beginning. However, the message:

  «Cannot start service on local computer windows firewall.» Error 1068: The dependency service or group
  Could not start.

  What else can I do to access the windows firewall?

  Hi elcri

  My apologies to zero you answer you earlier since May 3.

  I have to assume that the problem is still there?

  Allows to check and see if the ICS Service is running or not (we want to disable it if it is enabled/running)

  Click Start
  In the box, type start search in services of
  List programs, right-click on service , and then click run as administrator
  Scroll down the list of Services until you come to (ICS) ICS

  Is it enabled or disabled?  If on, double-click top and change startup to off and stop the service.
  Reset

  I would like to know if this solves the problem or not - thanks Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows could not start the service on the Local Computer Security Center. Error 1068: The dependency service or group could not start

  I use Windows 7 Home Premium

  My windows Security Center cannot be started. I spent to the Microsoft Management Console and tried to launch security through Services Center, but when I do I get the following message is displayed:

  "Windows failed to start the service on the Local Computer Security Center.

  "Error 1068: the dependency service or group could not start"
  Help, please.
  Thank you.

  Hi Rohit Chettri ,

  (I am not good in English)

  I am trying no operation troubleshooting you mentioned. I have it set for myself.

  I clicked on something related to the denfence in the heart of the action and when I restarted my computer is off almost all services. I couldn't even connect to the internet

  I went to the Configuration System (msconfig)-> services-> active tab all services and restart. After that my computer works normally.

  In any case thanks a lot Rohit Chettri.

• The driver has detected an error of the Comptroller on \Device\Ide\IdePort3

  Hello

  I'll try to explain my problem as best as possible in chronological order then please bear with me.

  I have Windows 7 x 64.
  So last week my PC have been freezing every two days. Sometimes every day. Black screen during the games, navigation or doing any activity. Each window has frozen, the screen went black. ctrl alt del did not work no response to any entry, the only option was to restart.

  Once restarted, the system would freeze again almost immediately, and again after another reboot. Only solution was physically turn off the computer, turn off the power and wait.  After some time (5-10 min) I turn the power on and system worked very well.

  I went to the observer of events and found "the pilot detected an error of the Comptroller on \Device\Ide\IdePort3." It took place in a series starting with a per minute, then after a few minutes, two or three that occur within one minute, the frequency of this error would be gradually go back even to 10 per minute and that's where the system would freeze.

  Looking at the event viewer I thought, hold for a second I have 3 discs (Disk0 - new SSD, Disk1 - new HDD, Disk2 - old HDD) so maybe that ideport3 refers to the CDROM which I disconnected but the error has not disappeared.

  Check the BIOS settings and deleted everything that had no boot from the internal storage (so: floppy USB - disk, CDROM,)-which did not help either.

  In the Act of desperation, I unplugged my old disk (Disk2) for 6 days I have not known of IdePort3 errors and system will work very well.

  After 6 days, to my embarrassment, error returned.
  This is the story of the appearance of the error:

  10/05/2015 19:56 - after that, I unplugged old hdd
  16/05/2015-09:35
  16/05/2015 14:34
  16/05/2015 14:34
  16/05/2015 14:34
  16/05/2015 14:34
  16/05/2015 14:35
  16/05/2015 14:36
  16/05/2015 14:36
  16/05/2015 14:37
  16/05/2015 14:37
  16/05/2015 14:37
  16/05/2015-17:28
  16/05/2015-17:29
  16/05/2015-17:31
  16/05/2015-17:33
  16/05/2015-17:33
  16/05/2015-17:34
  16/05/2015-17:35
  16/05/2015-17:35
  16/05/2015-17:35
  16/05/2015-17:35
  16/05/2015-17:35
  16/05/2015-17:35
  16/05/2015-17:36
  16/05/2015-17:36
  16/05/2015-17:36
  16/05/2015-17:36
  16/05/2015-17:36
  16/05/2015-17:36
  16/05/2015-17:36
  16/05/2015-17:36
  16/05/2015-17:36
  16/05/2015-17:37 - after this system error stopped

  Here are the details of the error

  -
  -
   
    11
    2
    0
    0 x 80000000000000
   
    107016
    System
    Odin
   
   
  -
    \Device\Ide\IdePort3
    0000100001000000000000000B0004C004000000850100C00000000000000000000000000000000001000000000000000000000005100000
   
   
   
   
  Let me know if you all the news and thank you for your time in reading my number.

  I bought the card mother-GA-Z68X-UD3-B3 3 years ago. There can be no IDE ports. It has 6 SATA ports.

  Here an explanation somewhat losely formulated to work on the port that could be the culprit. Since you have 6 SATA ports, why not play the game of elimination with them?

• Unknown error in the network and sharing Center

  When I opened my network and sharing Center where the active networks would be just said

  'Unknown '.

  and

  "The account specified for this service is different from the account specified for other services running in the same process"

  If I open Services.msc and check the list of networks and Network Location Awareness service, both are on automatic and both connect as a network Service.

  Network list service does not work and does not give the error:

  Error 1079: The account specified for this service is different from the account specified for other services running in the same process

  I'm connected to my home network and have internet access and also a local access to other computers, it's just not appearing is not on the network and sharing Center.

  A result of this is that some of the metro apps don't report any internet connection and will not start. I currently now disconnected my microsoft account on the computer and use a local account, but the problem is still there.

  I also tried

  netsh winsock reset

  from an administrator command prompt but no change.

  Can anyone help?

  Hi Andrea,

  Please keep us updated.

  This can be shown because of missing or corrupted system files. This is why I would recommend running the System File Checker tool, which is a Windows utility that allows users to find corruptions in Windows system files and restore corrupted files.

  To do this, click Start, type command or cmd prompt in the Search box, right click invite, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  At the command prompt, type the following command and press ENTER:

  sfc/scannow

  Note: Do not close the command prompt window until the audit is completed 100%. The results of the analysis will be posted when this process is complete.

  I hope this helps. Please feel free to answer in the case where you are facing in the future other problems with Windows.