Error loading Essbase Studio

Similar Questions

• Drill thru report error test Essbase studio

  Hi all
  
  Drill thru report Essbase studio produced the below error: impossible to retrieve the drill to the result.
  
  Error in the select statement. Line = 2466.
  Error in the execution of the query. Check the query and try again.
  Cannot execute an SQL query
  ORA-01791: not a SELECTed expression
  
  No idea I'm able to test some of the dimensions, but this error is coming up for a few dimensiosns... I checked all the joins between the dimensions and facts... all right.
  
  Thank you
  Praveen

  I suggest to look at the logs to see if you can find the generated SQL statements or to rent the values being passed. then you can start to debug the issue

• Error loading Essbase Integration Services 11.1.1.3 - ASO unicode

  Hello
  
  I am trying to create a unicode ASO using Essbase Integration Services 11.1.1.3 application, but when I run the data loading I got the following error:
  
  "ERROR: global application Type of storage may not be application that supports unicode.
  
  Someone know how I can get beyond this error?
  
  Thank you!

  It is a known problem in the Version of EIS 11.1.1.3 and is set in EIA 11.1.2.1

• Essbase Studio Configuration error

  Hello

  I installed 11.1.2.3 on a Windows 2003 vritualbox image using Oracle Express as a DB... Everything works well except the Essbase studio service stops after 10 seconds.

  • My diagnostic reports is unique back red section follows:

  Validate the connection to the server of Essbase Studio

  Error: The network communication with the server failed. Check your network connection and try again.

  Recommended action: start the application.

  • My server.log (E:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\EssbaseStudio\server.log) shows the following message:

  
  

  [2014 01-25 T 19: 48:04.980 + 01:00] [hyperion] [NOTIFICATION] [] [com.hyperion.cp.config] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] [SRC_CLASS: com.hyperion.cp.config.RegistryManager] [SRC_METHOD: getProperties] configuration of server Studio properties are extracted from the register of the Oracle.

  [2014 01-25 T 19: 48:05.089 + 01:00] [hyperion] [NOTIFICATION] [] [com.hyperion.cp.config] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] [SRC_CLASS: com.hyperion.cp.config.PropertyManager] [SRC_METHOD: loadProperties] server configuration file: E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseStudio\Server\server.properties.

  [2014 01-25 T 19: 48:05.136 + 01:00] [hyperion] [NOTIFICATION] [ESSSTD-183054] [com.hyperion.cp.server] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] [SRC_CLASS: com.hyperion.cp.server.ServerMain] [SRC_METHOD: initServer] Logger configuration file: E:\Oracle\Middleware\user_projects\epmsystem1\BPMS\bin\logging.xml.

  [2014 01-25 T 19: 48:05.136 + 01:00] [hyperion] [NOTIFICATION] [ESSSTD-183044] [com.hyperion.cp.server] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] [SRC_CLASS: com.hyperion.cp.server.ServerMain] [SRC_METHOD: initServer] switch.

  [2014 01-25 T 19: 48:05.136 + 01:00] [hyperion] [NOTIFICATION] [ESSSTD-183045] [com.hyperion.cp.server] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] [SRC_CLASS: com.hyperion.cp.server.ServerMain] [SRC_METHOD: initServer] Oracle Essbase Studio Server. The version 11.1.2.3.000, Build 4386, March 26, 2013. Copyright © 2008-2013, Oracle. All rights reserved

  [2014 01-25 T 19: 48:06.636 + 01:00] [EPMAUDITCLIENT] [NOTIFICATION] [EPMAUDClient-11002] [oracle. EPMAUDITCLIENT] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] wrong enable state of the customer

  [2014 01-25 T 19: 48:06.667 + 01:00] [EPMAUDITCLIENT] [NOTIFICATION] [EPMAUDClient-11000] [oracle. EPMAUDITCLIENT] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] Audit Client has been created for the product HUB - 11.1.2.0

  [2014 01-25 T 19: 48:20.480 + 01:00] [hyperion] [WARNING] [ESSSTD-144002] [com.hyperion.cp.driver.util] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] [SRC_CLASS: com.hyperion.cp.driver.util.DriverClassLoader] [SRC_METHOD: < init >] could not load the driver for sap.

  [2014 01-25 T 19: 48:20.480 + 01:00] [hyperion] [WARNING] [ESSSTD-144002] [com.hyperion.cp.driver.util] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] [SRC_CLASS: com.hyperion.cp.driver.util.DriverClassLoader] [SRC_METHOD: < init >] could not load the driver for teradata.

  [2014 01-25 T 19: 48:20.480 + 01:00] [hyperion] [WARNING] [ESSSTD-144002] [com.hyperion.cp.driver.util] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] [SRC_CLASS: com.hyperion.cp.driver.util.DriverClassLoader] [SRC_METHOD: < init >] could not load the driver for netezza.

  [2014 01-25 T 19: 48:21.183 + 01:00] [hyperion] [ERROR] [ESSSTD-043002] [com.hyperion.cp.catalog] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] [SRC_CLASS: com.hyperion.cp.catalog.Catalog] [SRC_METHOD: initialize] Catalog.CannotInitializeStorage = Cannot initialize catalog storage. Make sure that the server.properties file contains the correct information. [[

  com.hyperion.cp.catalog.exceptions.CatalogInitializationException: catalog. CatalogInitializationException.StorageInitializationFailure

  at com.hyperion.cp.catalog.storage.StorageFactory.getStorageInstance(StorageFactory.java:252)

  at com.hyperion.cp.catalog.transaction.TransactionManager.initialize(TransactionManager.java:64)

  at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:106)

  at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:198)

  to com.hyperion.cp.catalog.Catalog. < clinit > (Catalog.java:81)

  at java.lang.Class.forName0 (Native Method)

  at java.lang.Class.forName(Class.java:169)

  at com.hyperion.cp.catalog.CatalogInitializer.run(CatalogInitializer.java:71)

  to com.hyperion.cp.server.RequestListener$ SystemTask.run (RequestListener.java:1507)

  at com.hyperion.cp.server.RequestListener.runSystemTask(RequestListener.java:233)

  at com.hyperion.cp.server.RequestListener.init(RequestListener.java:174)

  at com.hyperion.cp.server.ServerMain.initServer(ServerMain.java:214)

  at com.hyperion.cp.server.ServerMain.main(ServerMain.java:296)

  Caused by: java.lang.reflect.InvocationTargetException

  at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)

  at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)

  at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)

  at java.lang.reflect.Constructor.newInstance(Constructor.java:513)

  at com.hyperion.cp.catalog.storage.StorageFactory.getStorageInstance(StorageFactory.java:246)

  ... 12 more

  Caused by: com.hyperion.cp.catalog.exceptions.CatalogInitializationException: the database 'SYSTEM' does not contain the tables in the catalogue of Studio. Please check the value of the "catalog.db" parameter in the server.properties file.

  at com.hyperion.cp.catalog.storage.StorageEngine.validateSignature(StorageEngine.java:151)

  to com.hyperion.cp.catalog.storage.StorageEngine. < init > (StorageEngine.java:95)

  at com.hyperion

  • If I watch the server.properties for Studio (E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseStudio\Server\server.properties) file then it is empty, except a headerline saying enties here are used to override the settings?
  • I rerun the EPM system configurator, but that made no difference.

  Anyone have any idea that I could do to fix this?

  Thanks in advance

  Erik

  In 11.1.2.3 the server.properties moved into the registry:

  11.1.2.3 version, Essbase Studio following server properties are stored in the registry of Oracle Hyperion Shared Services:

  • server.css.URL
  • Catalog.URL
  • Catalog.Password
  • server.httpPort
  • Catalog.UserName
  • Catalog.DB
  • transport.port
  • server.hss.bpmApplication
  • Server.DataFile.dir

  "The 'SYSTEM' database contains no Studio catalog tables. Check the value of the "catalog.db" parameter in the server.properties file. »< i="" wouldnt="" recommend="" using="" the="" system="" user="" for="" the="">

  See you soon

  John

  http://John-Goodwin.blogspot.com/

  
  

  
  

• Receive error message when you connect to a Hyperion Essbase Studio 11.1.2

  Hi all
  I searched the forum trying to find an answer to my problem without success. Thanks in advance for any help you can provide.
  
  When you try to connect to Essbase Studio Client, you receive an error "connection with Essbase Studio Server error: network error ', in the details of the tab of this popup is"network communication with the server failed. Check your network connection and try again.
  "Connection refused: connect". I found that this usually means that the Essbase Studio Service is not running. 11.1.2 Hyperion Essbase Studio is installed as a service. I don't know if this is the case in previous environments.
  
  The windows service is running and running and I also try to start from the start menu and it doesn't seem to be errors. But when I look at the logs of start-up, that's what I find.
  
  
  [2010-08-17 T 15: 29:15.457 - 07:00] [hyperion] [WARNING] [ESSSTD-144002] [com.hyperion.cp.driver.util] [host: ethype-dev] [nwaddr: 192.168.35.235] [tid: 10] [user name: System] [ecid: disabled, 0] [SRC_CLASS: com.hyperion.cp.driver.util.DriverClassLoader] [SRC_METHOD: < init >] [arg: sap] could not load the driver for sap.
  [2010-08-17 T 15: 29:15.457 - 07:00] [hyperion] [WARNING] [ESSSTD-144002] [com.hyperion.cp.driver.util] [host: ethype-dev] [nwaddr: 192.168.35.235] [tid: 10] [user name: System] [ecid: disabled, 0] [SRC_CLASS: com.hyperion.cp.driver.util.DriverClassLoader] [SRC_METHOD: < init >] [arg: teradata] could not load the driver for teradata.
  [2010-08-17 T 15: 29:15.473 - 07:00] [hyperion] [WARNING] [ESSSTD-144002] [com.hyperion.cp.driver.util] [host: ethype-dev] [nwaddr: 192.168.35.235] [tid: 10] [user name: System] [ecid: disabled, 0] [SRC_CLASS: com.hyperion.cp.driver.util.DriverClassLoader] [SRC_METHOD: < init >] [arg: netezza] could not load the driver for netezza.
  [2010-08-17 T 15: 29:15.707 - 07:00] [hyperion] * _ [ERROR] [ESSSTD-043002] [com.hyperion.cp.catalog] [host: ethype-dev] [nwaddr: 192.168.35.235] [tid: 10] [user name: System] [ecid: disabled, 0] [SRC_CLASS: com.hyperion.cp.catalog.Catalog] [SRC_METHOD: initialize] Catalog.CannotInitializeStorage = Cannot initialize catalog storage. Make sure that the server.properties file contains the correct information. [[_*
  com.hyperion.cp.catalog.exceptions.CatalogInitializationException: catalog. CatalogInitializationException.StorageInitializationFailure
  at com.hyperion.cp.catalog.storage.StorageFactory.getStorageInstance(StorageFactory.java:221)
  at com.hyperion.cp.catalog.transaction.TransactionManager.initialize(TransactionManager.java:64)
  at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:100)
  at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:166)
  to com.hyperion.cp.catalog.Catalog. < init > (Catalog.java:87)
  to com.hyperion.cp.catalog.Catalog. < clinit > (Catalog.java:75)
  at java.lang.Class.forName0 (Native Method)
  at java.lang.Class.forName(Class.java:169)
  at com.hyperion.cp.catalog.CatalogInitializer.run(CatalogInitializer.java:63)
  to com.hyperion.cp.server.RequestListener$ SystemTask.run (RequestListener.java:1303)
  at com.hyperion.cp.server.RequestListener.runSystemTask(RequestListener.java:168)
  to com.hyperion.cp.server.RequestListener. < init > (RequestListener.java:130)
  at com.hyperion.cp.server.ServerMain.initServer(ServerMain.java:192)
  at com.hyperion.cp.server.ServerMain.main(ServerMain.java:260)
  Caused by: java.lang.reflect.InvocationTargetException
  at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)
  at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
  at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
  at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
  at com.hyperion.cp.catalog.storage.StorageFactory.getStorageInstance(StorageFactory.java:215)
  ... 13 more
  Caused by: com.hyperion.cp.catalog.exceptions.CatalogInitializationException: the 'hstudio_dev.hypsql' database does not contain the tables in the catalogue of Studio. Please check the value of the "catalog.db" parameter in the server.properties file. _
  at com.hyperion.cp.catalog.storage.StorageEngine.validateSignature(StorageEngine.java:136)
  to com.hyperion.cp.catalog.storage.StorageEngine. < init > (StorageEngine.java:86)
  to com.hyperion.cp.catalog.storage.SQLStorageEngine. < init > (SQLStorageEngine.java:20)
  ... 18 more
  
  ]]
  
  I opened the server.properties file located under the E:\Oracle\Middleware\user_projects\epmsystem1\BPMS\bpms1\bin directory, and everything seems to be OK here. Here below.
  
  #
  #Tue August 17-14:45:43 PDT 2010
  Catalog.autoinit = true
  Catalog.UserName = hypsql
  transport.Port = 5300
  Catalog.URL=sqlserver\://ethype-SQL.Sierra.local\:1433
  Catalog.Password=69tVGsObffmeWaFX0LB2tA\=\=
  Catalog.DB = hstudio_dev.hypsql
  server.hss.bpmApplication=BPM\:77538
  
  I tried out the "-" in the server names and the name of DB without help, I tried to put quotes around the "hstudio_dev.hypsql" with no luck, and I tried to connect to a database that had no '-' inside. I also followed the steps described by the support for the same question in 11.1.1.x which you enter in the DB > Security > schema > add a new schema/user, create the user and the owner of the schema, etc. It also did not help.
  
  This is a new installation and everything else is fine to connect to DB, default user hypsql DB is the DB hstudio_dev. I installed in different environments, and this same problem happening in both environments. Please let me know if you have any questions, thank you for your time and your help.
  
  Also, I realize in the DB and I see that a lot of tables in fact were created then it will connect at least during Setup. I've also reconfigured several times without success on different from the DB and always new/clean the DB. and the hypsql of the user is a DBO for this DB. It's DB SQL 2005, Windows 2003 servers.
  
  Published by: 789316 on August 18, 2010 11:07
  
  Published by: 789316 on August 18, 2010 11:10
  
  Published by: 789316 on August 18, 2010 11:13
  
  Published by: 789316 on August 18, 2010 11:21

  You seem to be two people now, but you

  Catalog.DB = hstudio_dev.hypsql

  If the implementation is the same wouldn't

  Catalog.DB = hstudio_dev.dbo

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Error in access with Essbase Studio Console

  We get the error to connect with Essbase Studio Console.
  
  "children for Root." Reason: Name of unknown package 'extraction '. Line = 1. »
  
  This is a new installation.
  
  E.M.P. 11.1.2.2

  Hello

  During the installation of Essbase Studio only, ess_es_server.jar and ess_japi.jar are missing. If you install Essbase and Studio, they have not disappeared.

  This is due to the new bug 14232814 - in the COURSE of the INSTALLATION ONLY STUDIO SOME. NOT INSTALLED JAR FILES

  Try the following:

  Stop Essbase Studio
  copy the files in EPMSystem11R1\common\EssbaseJavaAPI\11.1.2.0\lib
  ess_es_server.jar
  ess_japi.jar
  If the folder does not exist, create it.

  1. stop essbase Studio.
  2 remove the tables in relational database
  3 paintings to recreate.
  4. start Essbase Studio.

  Scripts to let fall & recreate the catalog located under
  oracle\middleware\EPMSystem11R1\products\Essbase\EssbaseStudio\Server\database\common\db_name

  It could be that useful...

  KosuruS
  PS: If the above information is useful, mark :)

• Start error Essbase Studio

  Hi all
  
  I am very new to hyperion. I installed services, essbase and planning foundation and configured them. Then I installed essbase studio via EssbaseStudioConsole and started the system to help start the EPM system. When I run EPM System diagnosis, is everything except for this error:
  
  ESS FAILED: connection of Essbase Studio Essbase Studio server validation
  Error: The network communication with the server failed. Check your network connection and try again.
  Recommended action: application startup
  1 second
  
  What could cause such a mistake? I'm looking for what things in the environment that Essbase Studio depends on, but could not find one.
  
  Any help is very appreciated,
  
  Zain

  You need to check the server.properties for correct syntax to connect to Oracle, the file will be in /user_projects//BPM/BPM/bin

  If you use the name of the service Oracle syntax is

  Catalog.URL=oracle\://host\:port/OracleServiceName

  If you use the SID Oracle syntax is

  Catalog.URL=oracle\://host\:port\:sid

  If you make any changes, restart the service of Studio.

  Also, it looks like you use the schema system is that correct?
  "The 'System' database contains no tables of the catalog Studio."

  You shouldn't really use the diagram of the system and create one for the Studio.

  John
  http://John-Goodwin.blogspot.com/

• Essbase Studio error

  I am emptying everything that I don't use in the metadata browser. I am trying to remove something, but then I get this error:
  
  Mistake to destroy the declaration. Row = 143.
  
  Table of relationship refers to non-existent object. Report the error to Technical Support.
  
  Is there something in the backend db Essbase Studio to be removed?

  I had happen to 11.1.1.X Studio where I removed the artifacts that were used. It pipes the database completely. There really is an order you ERA to remove things. Basically, reverse order that they were created. With the help of the lineage is a good way to check where we use artifacts. 11.1.2.1 had much better to check see if oyu can delete everything first.

  At this point, I recommend restoring a backup system tables

• Essbase Studio Error (1021001): could not establish a connection with SQL data

  Hello.
  
  I try to deploy a cube Essbase Studio but I get the error: "* Error (1021001): could not establish connection to the SQL database server."
  
  My environment is Linux 5, Oracle 11 g and EMP 11.1.1.2. Database Oracle and Essbase has been installed with different users. The .bash_profile to hypadmin user (i.e. install Essbase) I put the following variables
  
  ORACLE_BASE=/U01/app/OracleDB/product/11.1.0
  ORACLE_HOME = $ORACLE_BASE/db_1
  LD_LIBRARY_PATH = / usr/X11R6/lib: $ORACLE_HOME/lib: $LD_LIBRARY_PATH
  ORACLE_HOSTNAME = DevBi.sigfe2
  PATH = $ORACLE_HOME/bin: $ORACLE_HOME/jdk/bin: $ORACLE_HOME/bin: / sbin: $ORACLE_HOME/opmn/bin: $PATH
  ORACLE_SID = orcl
  JAVA_HOME=/U01/app/InstallFiles/JDK1.5.0_19
  
  
  In my pc (windows xp), I can open the Essbase Studio console, the connection to the Oracle server, get the tables and create a minischema of measures and hierarchies (I can see the preview of hierarchies). I also can create cubes with EAS and can connect with MAXSHELL to essbase.
  
  When I try to deploy the cube of Essbaes Studio there get the error ' Error (1021001): failed to establish connection to SQL Database Server.
  
  The Essbase Studio log file says:
  
  + 12: 40:16 24/07/09 (admin-1) NEWS beginning hierarchical creation in the database "5.4.0.41:1423.POC_ESS. POC_ESS1 '... +»
  + 12: 40:16 24/07/09 (admin-1) FINA signed on Essbase by CSS token "5.4.0.41:1423" successfully... +.
  + 12: 40:16 24/07/09 (admin-1) building INFO Start dimension 'DM_CIUDADES'... +.
  + 12: 40:16 24/07/09 (admin-1) MAS FINA start creating rule file... +.
  + 12: 40:16 24/07/09 (admin-1) INFO SQL statement was created and implemented rule /home/hypadmin/hyperion/products/Essbase/EssbaseStudio/Server/./ess_japihome/data/DM_CIU.rul"+ file «»
  + 12: 40:16 24/07/09 INFO (admin-1) the query is "SELECT (CONCAT ("reg_", CAST (cp_105." ((ID_REGIONPADRE' AS VARCHAR2 (1000))) as 'REGION_PADRE', (CONCAT ("reg_", CAST (cp_105. (("' Be ' AS VARCHAR2 (1000))) as 'REGION_HIJO', cp_105. "' DE_REGION ' as 'REGION_HIJO. Defaults to"GO"POC ". "" Cp_105 ORDER BY DM_REGIONES_ESS3 cp_105. "" CSA DE_NIVEL ', cp_105. "" CSA ID_REGIONPADRE ', cp_105. "' BE ' ASC ' + '.
  + 12: INFO file 40:16 24/07/09 (admin-1) rule has been created and saved as "/home/hypadmin/hyperion/products/Essbase/EssbaseStudio/Server/./ess_japihome/data/DM_CIU.rul"+ ".
  + 12: 40:16 24/07/09 (admin-1) FINA Essbase starts to add members to DM_CIUDADES dimensioin based on the rules file. +
  + 12: 40:16 24/07/09 (admin-1) ADVERTENCIA (1021001): error al set conexion con el servidor SQL databases. Check out el registro for more information. +
  + 12: 40:16 24/07/09 (admin-1) ADVERTENCIA essbaseDriver.FailedToBuildDimensionException +.
  + 12: unexpected exception SERIOUS cubes from 24/07/09 (admin-1) 40:16 + EssbaseExport to be deployed
  -Exception-
  com.hyperion.cp.datasources.export.essbase.EssbaseDriverException: could not deploy Essbase cube
  ....
  
  
  Thank you for everyone who has an idea to help me solve this problem.
  
  A.S.

  Hello

  If you type database SID lowercase, try entering ITO uppercase. Strange, but my colleagues and I encounter this behavior several times.

• Essbase Studio impossible to 'Examining the sample data' in the Oracle DB Data Source

  E.M.P. version 11.1.2.3.500

  Oracle DB 11.2.0.4

  on Windows 2008R2

  I created a user DB ESSTBC with the following user privileges

  CREATE SESSION, CREATE TABLE, CREATE TRIGGER, CREATE TYPE, CREATE VIEW

  This is my first attempt on the Essbase Studio, so I executed the following scripts as the user ESSTBC to create the TBC tables and load the data

  tbc_create_oracle. SQL

  tbc_sampledata. SQL

  I am able to connect with ESSTBC and select the tables all loaded and made sure the data is loaded correctly

  Then in the Studio of Essbase, I created a data source, which I can list all the tables in the schema ESSTBC in 'Data Source Navigator'. I also managed to create a Minischema by joining the tables SALES, SCENARIO, and MEASURES.

  However, in "Data Source Navigator" when I select "SCENARIO", right click and select "View Sample Data", I am able to pull data from the table. that is the table with all the names of columns grid but no data. No error messages were shown in "Messages to the Console.

  Back to Developer SQL and connect the same DB as ESSTBC, I have no problem do a "SELECT * SCRIPT;" and recover all the data of the table without a problem.

  I proceed creating dimensions elements then a hierarchy of "SCENARIO". But again when I try to get a glimpse of the hierarchy has got an empty tree. Apparently, there's something wrong,

  No matter what mark on what I missed?

  Thank you very much.

  Problem solved. The cause being my stupidity ruin a access DB. I can see examples of data without changing anything in Essbase Studio after you change the DB user rights.

• Essbase studio connection problem

  Hi all
  
  I am trying to login with admin/password for Essbase Studio but it is in error. (Invalid identifying information).
  
  But I can't connect to EAS, IST and planning etc... with admin/password.
  
  Please let me know the solution.
  
  Thank you
  Alain

  prathap_k wrote:
  We noticed an error in the log files...

  Port '5300' is already in use; another instance of the server may already be running on this computer
  SEVERE server has encountered a fatal error and stops

  Updated the server.properties file and added an entry:
  transport.port = 3000

  restart the studio should have solved the problem, but it still didn't.

  Get an error

  ATTENTION could not load the driver for sap
  11:14:55 10/15/09 (System) SEVERE cannot load the connector for Teradata
  11:14:55 10/15/09 (System) WARNING could not load the driver for teradata
  11:14:55 10/15/09 (System) WARNING could not load the driver for mysql
  11:14:55 10/15/09 (System) WARNING could not load the driver for netezza

  Please let me know the solution.

  Thank you
  Alain

  Hello

  You must only change the port if you are sure that there is something else running on port 5300, if you say Studio has worked in the past and you have installed any other product so it wouldn't Studio using this port.

  Some of these messages that you post are standard warning messages.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Deploy Essbase Studio Cube

  Hi all
  
  
  
  I have a model in Essbase Studio to work well, when I deploy using the Essbase Studio console can load data and dimensions to the Essbase cube. I use the server property in the server.properties (essbase studio) file. If I use server.essbase.streamingCubeBuilding = false, Essbase Studio show Console a mistake on deploy processes
  
  
  
  I need to make a script to load the data and dimensions but I have these problems:
  
  
  
  1 - the rule created by Essbase Studio files does not work when I use it with EAS or MaxL. I get this error
  
  
  
  {+ \[DRIVER={DataDirect 5.2 oracle Wire Protocol}; Host = 5.4.0.41; Port = 1521; SID = orcl; UID =...; PWD =...; ArraySize = 1000000;]. +
  [[+... \[HY000] == > \[\[DataDirect]\[ODBC lib] ODBCINST. INI is not available in the directory indicated by the ODBCINST environment variable (or the current user's HOME directory), and therefore cannot be made connections without DSN.] +
  
  
  
  ODBC.ini is configured correctly, I can built files from rules of EAS and this work very well.
  
  
  
  2 - MaxL "deployment" does not and displays this error: error BPM: Parse error near by; ...
  
  
  
  I use this code:
  
  
  
  deploy the outline of the "POC_2_Model" model with the option
  incremental_load update all the
  preserve all data
  using the connection "POC_ESS".
  on the writing of error by default.
  
  Where
  -POC_2_Model is the name of the Essbase model in Essbase Studio
  -POC_ESS is the name of Essbase Studio relational database connection.
  
  
  
  I followed the syntax explained in the technical documentation for Oracle Essbase ([http://download.oracle.com/docs/cd/E12825_01/epm.111/esb_techref/maxl_deploy.htm])
  
  
  
  
  
  Anyone has an idea on why I can't use the rules files created by Essbase Studio Console? and why to deploy MaxL does not work?
  
  
  
  Thanks in advance.
  
  
  
  A.S.

  I think it is the documentation which is false, no doubt will be updated in the next release, well I hope it will be.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Maxl Essbase Studio deployment cube

  Hello
  
  I created a Cube Essbase with Essbase Studio. Everything works fine.
  Now I want to plan the deployment of cube (generate contour and load data). I tried to use the maxl deploy like it's statement explained the technical reference to Essbase.
  
  I used the following statement to delete the database and build the outline:
  
  deploy the outline of the model MyModelName with delete_database login admin option identified by password on host localhost.
  
  But everything I got this error message: "error BPM: Parse error near;"
  
  The syntax of my statement should be the same as in the documentation... but I think that is missing a few points as the application name and the database name?
  
  Thanks for the tips!

  Hello

  I also had problems with this. The documentation is not "what it takes for this command. The following example should work:

  deploy the outline of the 'TbcStudioModel' option incremental_load model updated that all preserve data connection 'admin' identified by 'password' on the host 'epmv11112' to database 'TcbStudi' application 'Studio' connect 'epmv11112 ';

  Gee

• Error loading data ASO loading it via Maxl

  Hi team,

  I have a huge data file and I am trying to load it in cube ASO. I did manually with the loading rules file. To automate the same, I wrote a maxl as below and get error like "Server queries will fail with the error code [1003086].

  Error unexpected essbase 1013295 '.»

  MAXL Query:

  change the 'app' database.' Cube' initialize load_buffer with buffer_id 1; Statement executed successfully

  import the "app" database.' Cube' data_file Server data ' / home/hypadmin/Oracle/Middleware/user_projects/epmsystem2/EssbaseServer/essbaseserver1/app/abc/abccube/Dataload.tx ' using Server rules_file 'load.rul' to load_buffer with buffer_id 1 error write to ' / home/hypadmin/Oracle/Middleware/user_projects/epmsystem2/EssbaseServer/essbaseserver1/app/abc/abccube/exp_16thAug.err ';

  "Queries to the server fails with error code [1003086].

  "Error unexpected essbase 1013295.

  import the database 'app'.' Cube' load_buffer with buffer_id data 1;  Statement executed successfully.

  
  

  Increasingly, I have another request.

  
  

  ASO, can I use the same OSI query to load the data as below without use of buffer.

  
  

  import the database 'app'.' Cube' database server of data_file ' / home/hypadmin/Oracle/Middleware/user_projects/epmsystem2/EssbaseServer/essbaseserver1/app/abc/abccube/Dataload.txt ' using the rules_file server 'Load.rul' error writing to ' / home/hypadmin/Oracle/Middleware/user_projects/epmsystem2/EssbaseServer/essbaseserver1/app/abc/abccube/exp_16thAug.err ';

  
  

  Thanks in advance
  

  
  

  
  

  
  

  
  

  Ah, as you had indicated the full path of the data file, I thought earlier that you run on the Essbase server. That's why I asked to omit the keyword "server."

  The right way to do it, if the execution of script on the local computer:

  (1) copy the data to the local computer and talk about the path of the script. In this case you don't need to use the keyword "server."

  (2) use the keyword 'server' and not to mention all the way, just the file name. I'm a little rusty on this point, because I have not used this option in ages, but I think that the file must be in the database directory (which is what you have), the directory of the application (abc), or under the ARBORPATH (.../essbaseserver1/app/)

  Andy

• Deployment of Application EPMA error (cube Essbase BSO)

  Hello

  I'm trying to deploy the EPMA application & I get the following error:

  Success.

  \\Record #8797 - error adding dynamic calc Member % deep property sales (3320)
  \\Record #8797 - no time dimension defined
  Statistical accounts + S T Stat Reps + X T % deep sales ~ X F E T ' \"5500"-> \"YearTotal\"/\"Sales\"-> \"YearTotal\ ';"    % of sales turnover %
  \\Record #8799 - error adding dynamic calc Member Margin_Inc % property (3320)
  \\Record #8799 - no time dimension defined
  Stat accounts + S T Stat Reps X T Margin_Inc % + X A E T '\"Margin\"/ \"Sales\ '; »

  I'm tagging the account member % deep sales & Margin_Inc % as average of TB, if I set this to none, I do not get these errors and what deploys without errors. Post deployment if I go to the main lines and try to assign average TB directly in EA I am able to do it without any errors.

  I'm on EPMA 11.1.2.1, this error is not involved in the planning application but in cube Essbase BSO EPMA

  Any thoughts?

  Thank you.

  Sorry - reread your post and follows it is an EPMA BSO app, does not intend.  You can try placing the period before dimension the dimension account in order and see if it deploys?  I know that's not ideal, but just as a test.  You can read the end of this possibly related post:

  Re: Essbase Studio - hierarchy of measures

  Thank you

  Jon