Start error Essbase Studio

Similar Questions

• Essbase Studio 11.1.2.3 version service menu drop-down

  Hi gurus,

  I have a version of the 11.1.2.3 on Windows Server 2008 R2 environment, and whenever I start the Essbase Studio Service it just stops.

  I found the following at EventViewer:

  The description for event ID 0 in source HyS9EssbaseStudio_epmsystem1 is not found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  If the event is on another computer, the display information had to be saved with the event.

  The following information has been included in the event:

  Java Virtual Machine has finished with a code 1, the service is stopped.

  the message resource is present, but the message is not in the string/message table

  Anyone know what this means and what is the origin of this service?

  Thanks in advance,

  Concerning

  Hello!

  I found the problem. The password DB Essbase Studio has been exceeded (as you can see in the newspaper Essbase Studio below):

  [2014 01-16 T 09: 41:23.448 - 02:00] [hyperion] [NOTIFICATION] [] [com.hyperion.cp.config] [host: RJ1 - 2 K 8-BI-P06] [nwaddr: 172.16.0.5] [tid: 10] [user name: System] [ecid: 0000KEQqivqFw0G6yzuXMG1IpwLR000001, 0] [SRC_CLASS: com.hyperion.cp.config.RegistryManager] [SRC_METHOD: getProperties] as configuracao servidor Studio sao recuperadas propriedades do registro Oracle.

  [2014 01-16 T 09: 41:23.461 - 02:00] [hyperion] [NOTIFICATION] [] [com.hyperion.cp.config] [host: RJ1 - 2 K 8-BI-P06] [nwaddr: 172.16.0.5] [tid: 10] [user name: System] [ecid: 0000KEQqivqFw0G6yzuXMG1IpwLR000001, 0] [SRC_CLASS: com.hyperion.cp.config.PropertyManager] [SRC_METHOD: loadProperties] land of configuracao server: C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseStudio\Server\server.properties.

  [2014 01-16 T 09: 41:23.481 - 02:00] [hyperion] [NOTIFICATION] [ESSSTD-183054] [com.hyperion.cp.server] [host: RJ1 - 2 K 8-BI-P06] [nwaddr: 172.16.0.5] [tid: 10] [user name: System] [ecid: 0000KEQqivqFw0G6yzuXMG1IpwLR000001, 0] [SRC_CLASS: com.hyperion.cp.server.ServerMain] [SRC_METHOD: initServer] recorder configuracao maintains: C:\Oracle\Middleware\user_projects\epmsystem1\BPMS\bin\logging.xml.

  [2014 01-16 T 09: 41:23.482 - 02:00] [hyperion] [NOTIFICATION] [ESSSTD-183044] [com.hyperion.cp.server] [host: RJ1 - 2 K 8-BI-P06] [nwaddr: 172.16.0.5] [tid: 10] [user name: System] [ecid: 0000KEQqivqFw0G6yzuXMG1IpwLR000001, 0] [SRC_CLASS: com.hyperion.cp.server.ServerMain] [SRC_METHOD: initServer] Inicializando.

  [2014 01-16 T 09: 41:23.484 - 02:00] [hyperion] [NOTIFICATION] [ESSSTD-183045] [com.hyperion.cp.server] [host: RJ1 - 2 K 8-BI-P06] [nwaddr: 172.16.0.5] [tid: 10] [user name: System] [ecid: 0000KEQqivqFw0G6yzuXMG1IpwLR000001, 0] [SRC_CLASS: com.hyperion.cp.server.ServerMain] [SRC_METHOD: initServer] Oracle Essbase Studio Server. The version 11.1.2.3.000, Build 4386, March 26, 2013. Copyright © 2008-2013, Oracle. All rights reserved

  [2014 01-16 T 09: 41:26.179 - 02:00] [EPMAUDITCLIENT] [NOTIFICATION] [EPMAUDClient-11002] [oracle. EPMAUDITCLIENT] [host: RJ1 - 2 K 8-BI-P06] [nwaddr: 172.16.0.5] [tid: 10] [user name: System] [ecid: 0000KEQqivqFw0G6yzuXMG1IpwLR000001, 0] false Ativado client status

  [2014 01-16 T 09: 41:26.191 - 02:00] [EPMAUDITCLIENT] [NOTIFICATION] [EPMAUDClient-11000] [oracle. EPMAUDITCLIENT] [host: RJ1 - 2 K 8-BI-P06] [nwaddr: 172.16.0.5] [tid: 10] [user name: System] [ecid: 0000KEQqivqFw0G6yzuXMG1IpwLR000001, 0] O client of titular faith criado para o produto HUB - 11.1.2.0

  [2014 01-16 T 09: 41:27.138 - 02:00] [hyperion] [WARNING] [ESSSTD-144002] [com.hyperion.cp.driver.util] [host: RJ1 - 2 K 8-BI-P06] [nwaddr: 172.16.0.5] [tid: 10] [user name: System] [ecid: 0000KEQqivqFw0G6yzuXMG1IpwLR000001, 0] [SRC_CLASS: com.hyperion.cp.driver.util.DriverClassLoader] [SRC_METHOD: ] Falha ao para carregar sap pilot.

  [2014 01-16 T 09: 41:27.151 - 02:00] [hyperion] [WARNING] [ESSSTD-144002] [com.hyperion.cp.driver.util] [host: RJ1 - 2 K 8-BI-P06] [nwaddr: 172.16.0.5] [tid: 10] [user name: System] [ecid: 0000KEQqivqFw0G6yzuXMG1IpwLR000001, 0] [SRC_CLASS: com.hyperion.cp.driver.util.DriverClassLoader] [SRC_METHOD: ] Falha ao carregar driver para teradata.

  [2014 01-16 T 09: 41:27.157 - 02:00] [hyperion] [WARNING] [ESSSTD-144002] [com.hyperion.cp.driver.util] [host: RJ1 - 2 K 8-BI-P06] [nwaddr: 172.16.0.5] [tid: 10] [user name: System] [ecid: 0000KEQqivqFw0G6yzuXMG1IpwLR000001, 0] [SRC_CLASS: com.hyperion.cp.driver.util.DriverClassLoader] [SRC_METHOD: ] Falha ao carregar driver para netezza.

  [2014 01-16 T 09: 41:27.252 - 02:00] [hyperion] [ERROR] [ESSSTD-145015] [com.hyperion.cp.driver] [host: RJ1 - 2 K 8-BI-P06] [nwaddr: 172.16.0.5] [tid: 10] [user name: System] [ecid: 0000KEQqivqFw0G6yzuXMG1IpwLR000001, 0] [SRC_CLASS: com.hyperion.cp.driver.adapters.sql.oracle.OracleConnection] [SRC_METHOD: createSQLConnection] e possible estabelecer conexao com o servidor não Oracle: ORA-28001: the password has expired [[ ]]

  .

  ]]

  [2014 01-16 T 09: 41:27.304 - 02:00] [hyperion] [ERROR] [ESSSTD-145015] [com.hyperion.cp.driver] [host: RJ1 - 2 K 8-BI-P06] [nwaddr: 172.16.0.5] [tid: 10] [user name: System] [ecid: 0000KEQqivqFw0G6yzuXMG1IpwLR000001, 0] [SRC_CLASS: com.hyperion.cp.driver.adapters.sql.oracle.OracleConnection] [SRC_METHOD: createSQLConnection] e possible estabelecer conexao com o servidor não Oracle: ORA-28001: the password has expired [[ ]]

  .

  ]]

  [2014 01-16 T 09: 41:27.306 - 02:00] [hyperion] [ERROR] [ESSSTD-043002] [com.hyperion.cp.catalog] [host: RJ1 - 2 K 8-BI-P06] [nwaddr: 172.16.0.5] [tid: 10] [user name: System] [ecid: 0000KEQqivqFw0G6yzuXMG1IpwLR000001, 0] [SRC_CLASS: com.hyperion.cp.catalog.Catalog] [SRC_METHOD: initialize] Catalog.CannotInitializeStorage = Nao e o armazenamento catalogo initialize possible. Verifique se o land server.properties contemporary have information corretas. [[

  com.hyperion.cp.catalog.exceptions.CatalogInitializationException: Nao e initialize o armazenamento dados mechanism possible.

  at com.hyperion.cp.catalog.storage.StorageFactory.initialize(StorageFactory.java:91)

  at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:104)

  at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:198)

  to com.hyperion.cp.catalog.Catalog. (Catalog.java:81)

  at java.lang.Class.forName0 (Native Method)

  at java.lang.Class.forName(Class.java:169)

  at com.hyperion.cp.catalog.CatalogInitializer.run(CatalogInitializer.java:71)

  to com.hyperion.cp.server.RequestListener$ SystemTask.run (RequestListener.java:1507)

  at com.hyperion.cp.server.RequestListener.runSystemTask(RequestListener.java:233)

  at com.hyperion.cp.server.RequestListener.init(RequestListener.java:174)

  at com.hyperion.cp.server.ServerMain.initServer(ServerMain.java:214)

  at com.hyperion.cp.server.ServerMain.main(ServerMain.java:296)

  Caused by: com.hyperion.cp.driver.util.DriverConnectionException: Nao e possible estabelecer conexao com o servidor Oracle.

  at com.hyperion.cp.driver.adapters.sql.oracle.OracleConnection.createSQLConnection(OracleConnection.java:297)

  to com.hyperion.cp.driver.adapters.sql.SQLConnection$ ConnectionPool. (SQLConnection.java:1229)

  at com.hyperion.cp.driver.adapters.sql.SQLConnection.construct(SQLConnection.java:450)

  at com.hyperion.cp.driver.ConnectionManager.getConnection(ConnectionManager.java:113)

  at com.hyperion.cp.driver.DriverEngine.getConnection(DriverEngine.java:60)

  at com.hyperion.cp.server.QueueableTask.setMetadataConnection(QueueableTask.java:53)

  at com.hyperion.cp.catalog.storage.StorageFactory.initialize(StorageFactory.java:73)

  ... 11 more

  Caused by: java.sql.SQLException: ORA-28001: the password has expired

  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)

  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:397)

  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:389)

  at oracle.jdbc.driver.T4CTTIfun.processError(T4CTTIfun.java:689)

  at oracle.jdbc.driver.T4CTTIoauthenticate.processError(T4CTTIoauthenticate.java:455)

  at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)

  at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)

  at oracle.jdbc.driver.T4CTTIoauthenticate.doOAUTH(T4CTTIoauthenticate.java:387)

  at oracle.jdbc.driver.T4CTTIoauthenticate.doOAUTH(T4CTTIoauthenticate.java:814)

  at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:418)

  to oracle.jdbc.driver.PhysicalConnection. (PhysicalConnection.java:678)

  to oracle.jdbc.driver.T4CConnection. (T4CConnection.java:234)

  at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:34)

  at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:567)

  at java.sql.DriverManager.getConnection(DriverManager.java:582)

  at java.sql.DriverManager.getConnection(DriverManager.java:154)

  at com.hyperion.cp.driver.adapters.sql.oracle.OracleConnection.createSQLConnection(OracleConnection.java:280)

  ... more than 17

  ]]

  After having found this user to the DB Server service started without any error.

  Thank you all for your time.

  Kind regards

  Alvaro

• Essbase Studio Configuration error

  Hello

  I installed 11.1.2.3 on a Windows 2003 vritualbox image using Oracle Express as a DB... Everything works well except the Essbase studio service stops after 10 seconds.

  • My diagnostic reports is unique back red section follows:

  Validate the connection to the server of Essbase Studio

  Error: The network communication with the server failed. Check your network connection and try again.

  Recommended action: start the application.

  • My server.log (E:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\EssbaseStudio\server.log) shows the following message:

  
  

  [2014 01-25 T 19: 48:04.980 + 01:00] [hyperion] [NOTIFICATION] [] [com.hyperion.cp.config] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] [SRC_CLASS: com.hyperion.cp.config.RegistryManager] [SRC_METHOD: getProperties] configuration of server Studio properties are extracted from the register of the Oracle.

  [2014 01-25 T 19: 48:05.089 + 01:00] [hyperion] [NOTIFICATION] [] [com.hyperion.cp.config] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] [SRC_CLASS: com.hyperion.cp.config.PropertyManager] [SRC_METHOD: loadProperties] server configuration file: E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseStudio\Server\server.properties.

  [2014 01-25 T 19: 48:05.136 + 01:00] [hyperion] [NOTIFICATION] [ESSSTD-183054] [com.hyperion.cp.server] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] [SRC_CLASS: com.hyperion.cp.server.ServerMain] [SRC_METHOD: initServer] Logger configuration file: E:\Oracle\Middleware\user_projects\epmsystem1\BPMS\bin\logging.xml.

  [2014 01-25 T 19: 48:05.136 + 01:00] [hyperion] [NOTIFICATION] [ESSSTD-183044] [com.hyperion.cp.server] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] [SRC_CLASS: com.hyperion.cp.server.ServerMain] [SRC_METHOD: initServer] switch.

  [2014 01-25 T 19: 48:05.136 + 01:00] [hyperion] [NOTIFICATION] [ESSSTD-183045] [com.hyperion.cp.server] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] [SRC_CLASS: com.hyperion.cp.server.ServerMain] [SRC_METHOD: initServer] Oracle Essbase Studio Server. The version 11.1.2.3.000, Build 4386, March 26, 2013. Copyright © 2008-2013, Oracle. All rights reserved

  [2014 01-25 T 19: 48:06.636 + 01:00] [EPMAUDITCLIENT] [NOTIFICATION] [EPMAUDClient-11002] [oracle. EPMAUDITCLIENT] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] wrong enable state of the customer

  [2014 01-25 T 19: 48:06.667 + 01:00] [EPMAUDITCLIENT] [NOTIFICATION] [EPMAUDClient-11000] [oracle. EPMAUDITCLIENT] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] Audit Client has been created for the product HUB - 11.1.2.0

  [2014 01-25 T 19: 48:20.480 + 01:00] [hyperion] [WARNING] [ESSSTD-144002] [com.hyperion.cp.driver.util] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] [SRC_CLASS: com.hyperion.cp.driver.util.DriverClassLoader] [SRC_METHOD: < init >] could not load the driver for sap.

  [2014 01-25 T 19: 48:20.480 + 01:00] [hyperion] [WARNING] [ESSSTD-144002] [com.hyperion.cp.driver.util] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] [SRC_CLASS: com.hyperion.cp.driver.util.DriverClassLoader] [SRC_METHOD: < init >] could not load the driver for teradata.

  [2014 01-25 T 19: 48:20.480 + 01:00] [hyperion] [WARNING] [ESSSTD-144002] [com.hyperion.cp.driver.util] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] [SRC_CLASS: com.hyperion.cp.driver.util.DriverClassLoader] [SRC_METHOD: < init >] could not load the driver for netezza.

  [2014 01-25 T 19: 48:21.183 + 01:00] [hyperion] [ERROR] [ESSSTD-043002] [com.hyperion.cp.catalog] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] [SRC_CLASS: com.hyperion.cp.catalog.Catalog] [SRC_METHOD: initialize] Catalog.CannotInitializeStorage = Cannot initialize catalog storage. Make sure that the server.properties file contains the correct information. [[

  com.hyperion.cp.catalog.exceptions.CatalogInitializationException: catalog. CatalogInitializationException.StorageInitializationFailure

  at com.hyperion.cp.catalog.storage.StorageFactory.getStorageInstance(StorageFactory.java:252)

  at com.hyperion.cp.catalog.transaction.TransactionManager.initialize(TransactionManager.java:64)

  at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:106)

  at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:198)

  to com.hyperion.cp.catalog.Catalog. < clinit > (Catalog.java:81)

  at java.lang.Class.forName0 (Native Method)

  at java.lang.Class.forName(Class.java:169)

  at com.hyperion.cp.catalog.CatalogInitializer.run(CatalogInitializer.java:71)

  to com.hyperion.cp.server.RequestListener$ SystemTask.run (RequestListener.java:1507)

  at com.hyperion.cp.server.RequestListener.runSystemTask(RequestListener.java:233)

  at com.hyperion.cp.server.RequestListener.init(RequestListener.java:174)

  at com.hyperion.cp.server.ServerMain.initServer(ServerMain.java:214)

  at com.hyperion.cp.server.ServerMain.main(ServerMain.java:296)

  Caused by: java.lang.reflect.InvocationTargetException

  at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)

  at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)

  at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)

  at java.lang.reflect.Constructor.newInstance(Constructor.java:513)

  at com.hyperion.cp.catalog.storage.StorageFactory.getStorageInstance(StorageFactory.java:246)

  ... 12 more

  Caused by: com.hyperion.cp.catalog.exceptions.CatalogInitializationException: the database 'SYSTEM' does not contain the tables in the catalogue of Studio. Please check the value of the "catalog.db" parameter in the server.properties file.

  at com.hyperion.cp.catalog.storage.StorageEngine.validateSignature(StorageEngine.java:151)

  to com.hyperion.cp.catalog.storage.StorageEngine. < init > (StorageEngine.java:95)

  at com.hyperion

  • If I watch the server.properties for Studio (E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseStudio\Server\server.properties) file then it is empty, except a headerline saying enties here are used to override the settings?
  • I rerun the EPM system configurator, but that made no difference.

  Anyone have any idea that I could do to fix this?

  Thanks in advance

  Erik

  In 11.1.2.3 the server.properties moved into the registry:

  11.1.2.3 version, Essbase Studio following server properties are stored in the registry of Oracle Hyperion Shared Services:

  • server.css.URL
  • Catalog.URL
  • Catalog.Password
  • server.httpPort
  • Catalog.UserName
  • Catalog.DB
  • transport.port
  • server.hss.bpmApplication
  • Server.DataFile.dir

  "The 'SYSTEM' database contains no Studio catalog tables. Check the value of the "catalog.db" parameter in the server.properties file. »< i="" wouldnt="" recommend="" using="" the="" system="" user="" for="" the="">

  See you soon

  John

  http://John-Goodwin.blogspot.com/

  
  

  
  

• Error in access with Essbase Studio Console

  We get the error to connect with Essbase Studio Console.
  
  "children for Root." Reason: Name of unknown package 'extraction '. Line = 1. »
  
  This is a new installation.
  
  E.M.P. 11.1.2.2

  Hello

  During the installation of Essbase Studio only, ess_es_server.jar and ess_japi.jar are missing. If you install Essbase and Studio, they have not disappeared.

  This is due to the new bug 14232814 - in the COURSE of the INSTALLATION ONLY STUDIO SOME. NOT INSTALLED JAR FILES

  Try the following:

  Stop Essbase Studio
  copy the files in EPMSystem11R1\common\EssbaseJavaAPI\11.1.2.0\lib
  ess_es_server.jar
  ess_japi.jar
  If the folder does not exist, create it.

  1. stop essbase Studio.
  2 remove the tables in relational database
  3 paintings to recreate.
  4. start Essbase Studio.

  Scripts to let fall & recreate the catalog located under
  oracle\middleware\EPMSystem11R1\products\Essbase\EssbaseStudio\Server\database\common\db_name

  It could be that useful...

  KosuruS
  PS: If the above information is useful, mark :)

• Drill thru report error test Essbase studio

  Hi all
  
  Drill thru report Essbase studio produced the below error: impossible to retrieve the drill to the result.
  
  Error in the select statement. Line = 2466.
  Error in the execution of the query. Check the query and try again.
  Cannot execute an SQL query
  ORA-01791: not a SELECTed expression
  
  No idea I'm able to test some of the dimensions, but this error is coming up for a few dimensiosns... I checked all the joins between the dimensions and facts... all right.
  
  Thank you
  Praveen

  I suggest to look at the logs to see if you can find the generated SQL statements or to rent the values being passed. then you can start to debug the issue

• Receive error message when you connect to a Hyperion Essbase Studio 11.1.2

  Hi all
  I searched the forum trying to find an answer to my problem without success. Thanks in advance for any help you can provide.
  
  When you try to connect to Essbase Studio Client, you receive an error "connection with Essbase Studio Server error: network error ', in the details of the tab of this popup is"network communication with the server failed. Check your network connection and try again.
  "Connection refused: connect". I found that this usually means that the Essbase Studio Service is not running. 11.1.2 Hyperion Essbase Studio is installed as a service. I don't know if this is the case in previous environments.
  
  The windows service is running and running and I also try to start from the start menu and it doesn't seem to be errors. But when I look at the logs of start-up, that's what I find.
  
  
  [2010-08-17 T 15: 29:15.457 - 07:00] [hyperion] [WARNING] [ESSSTD-144002] [com.hyperion.cp.driver.util] [host: ethype-dev] [nwaddr: 192.168.35.235] [tid: 10] [user name: System] [ecid: disabled, 0] [SRC_CLASS: com.hyperion.cp.driver.util.DriverClassLoader] [SRC_METHOD: < init >] [arg: sap] could not load the driver for sap.
  [2010-08-17 T 15: 29:15.457 - 07:00] [hyperion] [WARNING] [ESSSTD-144002] [com.hyperion.cp.driver.util] [host: ethype-dev] [nwaddr: 192.168.35.235] [tid: 10] [user name: System] [ecid: disabled, 0] [SRC_CLASS: com.hyperion.cp.driver.util.DriverClassLoader] [SRC_METHOD: < init >] [arg: teradata] could not load the driver for teradata.
  [2010-08-17 T 15: 29:15.473 - 07:00] [hyperion] [WARNING] [ESSSTD-144002] [com.hyperion.cp.driver.util] [host: ethype-dev] [nwaddr: 192.168.35.235] [tid: 10] [user name: System] [ecid: disabled, 0] [SRC_CLASS: com.hyperion.cp.driver.util.DriverClassLoader] [SRC_METHOD: < init >] [arg: netezza] could not load the driver for netezza.
  [2010-08-17 T 15: 29:15.707 - 07:00] [hyperion] * _ [ERROR] [ESSSTD-043002] [com.hyperion.cp.catalog] [host: ethype-dev] [nwaddr: 192.168.35.235] [tid: 10] [user name: System] [ecid: disabled, 0] [SRC_CLASS: com.hyperion.cp.catalog.Catalog] [SRC_METHOD: initialize] Catalog.CannotInitializeStorage = Cannot initialize catalog storage. Make sure that the server.properties file contains the correct information. [[_*
  com.hyperion.cp.catalog.exceptions.CatalogInitializationException: catalog. CatalogInitializationException.StorageInitializationFailure
  at com.hyperion.cp.catalog.storage.StorageFactory.getStorageInstance(StorageFactory.java:221)
  at com.hyperion.cp.catalog.transaction.TransactionManager.initialize(TransactionManager.java:64)
  at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:100)
  at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:166)
  to com.hyperion.cp.catalog.Catalog. < init > (Catalog.java:87)
  to com.hyperion.cp.catalog.Catalog. < clinit > (Catalog.java:75)
  at java.lang.Class.forName0 (Native Method)
  at java.lang.Class.forName(Class.java:169)
  at com.hyperion.cp.catalog.CatalogInitializer.run(CatalogInitializer.java:63)
  to com.hyperion.cp.server.RequestListener$ SystemTask.run (RequestListener.java:1303)
  at com.hyperion.cp.server.RequestListener.runSystemTask(RequestListener.java:168)
  to com.hyperion.cp.server.RequestListener. < init > (RequestListener.java:130)
  at com.hyperion.cp.server.ServerMain.initServer(ServerMain.java:192)
  at com.hyperion.cp.server.ServerMain.main(ServerMain.java:260)
  Caused by: java.lang.reflect.InvocationTargetException
  at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)
  at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
  at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
  at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
  at com.hyperion.cp.catalog.storage.StorageFactory.getStorageInstance(StorageFactory.java:215)
  ... 13 more
  Caused by: com.hyperion.cp.catalog.exceptions.CatalogInitializationException: the 'hstudio_dev.hypsql' database does not contain the tables in the catalogue of Studio. Please check the value of the "catalog.db" parameter in the server.properties file. _
  at com.hyperion.cp.catalog.storage.StorageEngine.validateSignature(StorageEngine.java:136)
  to com.hyperion.cp.catalog.storage.StorageEngine. < init > (StorageEngine.java:86)
  to com.hyperion.cp.catalog.storage.SQLStorageEngine. < init > (SQLStorageEngine.java:20)
  ... 18 more
  
  ]]
  
  I opened the server.properties file located under the E:\Oracle\Middleware\user_projects\epmsystem1\BPMS\bpms1\bin directory, and everything seems to be OK here. Here below.
  
  #
  #Tue August 17-14:45:43 PDT 2010
  Catalog.autoinit = true
  Catalog.UserName = hypsql
  transport.Port = 5300
  Catalog.URL=sqlserver\://ethype-SQL.Sierra.local\:1433
  Catalog.Password=69tVGsObffmeWaFX0LB2tA\=\=
  Catalog.DB = hstudio_dev.hypsql
  server.hss.bpmApplication=BPM\:77538
  
  I tried out the "-" in the server names and the name of DB without help, I tried to put quotes around the "hstudio_dev.hypsql" with no luck, and I tried to connect to a database that had no '-' inside. I also followed the steps described by the support for the same question in 11.1.1.x which you enter in the DB > Security > schema > add a new schema/user, create the user and the owner of the schema, etc. It also did not help.
  
  This is a new installation and everything else is fine to connect to DB, default user hypsql DB is the DB hstudio_dev. I installed in different environments, and this same problem happening in both environments. Please let me know if you have any questions, thank you for your time and your help.
  
  Also, I realize in the DB and I see that a lot of tables in fact were created then it will connect at least during Setup. I've also reconfigured several times without success on different from the DB and always new/clean the DB. and the hypsql of the user is a DBO for this DB. It's DB SQL 2005, Windows 2003 servers.
  
  Published by: 789316 on August 18, 2010 11:07
  
  Published by: 789316 on August 18, 2010 11:10
  
  Published by: 789316 on August 18, 2010 11:13
  
  Published by: 789316 on August 18, 2010 11:21

  You seem to be two people now, but you

  Catalog.DB = hstudio_dev.hypsql

  If the implementation is the same wouldn't

  Catalog.DB = hstudio_dev.dbo

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Essbase Studio Error (1021001): could not establish a connection with SQL data

  Hello.
  
  I try to deploy a cube Essbase Studio but I get the error: "* Error (1021001): could not establish connection to the SQL database server."
  
  My environment is Linux 5, Oracle 11 g and EMP 11.1.1.2. Database Oracle and Essbase has been installed with different users. The .bash_profile to hypadmin user (i.e. install Essbase) I put the following variables
  
  ORACLE_BASE=/U01/app/OracleDB/product/11.1.0
  ORACLE_HOME = $ORACLE_BASE/db_1
  LD_LIBRARY_PATH = / usr/X11R6/lib: $ORACLE_HOME/lib: $LD_LIBRARY_PATH
  ORACLE_HOSTNAME = DevBi.sigfe2
  PATH = $ORACLE_HOME/bin: $ORACLE_HOME/jdk/bin: $ORACLE_HOME/bin: / sbin: $ORACLE_HOME/opmn/bin: $PATH
  ORACLE_SID = orcl
  JAVA_HOME=/U01/app/InstallFiles/JDK1.5.0_19
  
  
  In my pc (windows xp), I can open the Essbase Studio console, the connection to the Oracle server, get the tables and create a minischema of measures and hierarchies (I can see the preview of hierarchies). I also can create cubes with EAS and can connect with MAXSHELL to essbase.
  
  When I try to deploy the cube of Essbaes Studio there get the error ' Error (1021001): failed to establish connection to SQL Database Server.
  
  The Essbase Studio log file says:
  
  + 12: 40:16 24/07/09 (admin-1) NEWS beginning hierarchical creation in the database "5.4.0.41:1423.POC_ESS. POC_ESS1 '... +»
  + 12: 40:16 24/07/09 (admin-1) FINA signed on Essbase by CSS token "5.4.0.41:1423" successfully... +.
  + 12: 40:16 24/07/09 (admin-1) building INFO Start dimension 'DM_CIUDADES'... +.
  + 12: 40:16 24/07/09 (admin-1) MAS FINA start creating rule file... +.
  + 12: 40:16 24/07/09 (admin-1) INFO SQL statement was created and implemented rule /home/hypadmin/hyperion/products/Essbase/EssbaseStudio/Server/./ess_japihome/data/DM_CIU.rul"+ file «»
  + 12: 40:16 24/07/09 INFO (admin-1) the query is "SELECT (CONCAT ("reg_", CAST (cp_105." ((ID_REGIONPADRE' AS VARCHAR2 (1000))) as 'REGION_PADRE', (CONCAT ("reg_", CAST (cp_105. (("' Be ' AS VARCHAR2 (1000))) as 'REGION_HIJO', cp_105. "' DE_REGION ' as 'REGION_HIJO. Defaults to"GO"POC ". "" Cp_105 ORDER BY DM_REGIONES_ESS3 cp_105. "" CSA DE_NIVEL ', cp_105. "" CSA ID_REGIONPADRE ', cp_105. "' BE ' ASC ' + '.
  + 12: INFO file 40:16 24/07/09 (admin-1) rule has been created and saved as "/home/hypadmin/hyperion/products/Essbase/EssbaseStudio/Server/./ess_japihome/data/DM_CIU.rul"+ ".
  + 12: 40:16 24/07/09 (admin-1) FINA Essbase starts to add members to DM_CIUDADES dimensioin based on the rules file. +
  + 12: 40:16 24/07/09 (admin-1) ADVERTENCIA (1021001): error al set conexion con el servidor SQL databases. Check out el registro for more information. +
  + 12: 40:16 24/07/09 (admin-1) ADVERTENCIA essbaseDriver.FailedToBuildDimensionException +.
  + 12: unexpected exception SERIOUS cubes from 24/07/09 (admin-1) 40:16 + EssbaseExport to be deployed
  -Exception-
  com.hyperion.cp.datasources.export.essbase.EssbaseDriverException: could not deploy Essbase cube
  ....
  
  
  Thank you for everyone who has an idea to help me solve this problem.
  
  A.S.

  Hello

  If you type database SID lowercase, try entering ITO uppercase. Strange, but my colleagues and I encounter this behavior several times.

• Essbase Studio - Server start failure

  Installed EMP 11.1 on Oracle. Initially installed Essbase Studio under the same user/tablespace as all components of the EMP. The Essbase Studio Server startup fails with the error message had permissions to initialize the catalog. As it appeared that he was trying to initialize the tables under the user, I created a separate user for Studio and set up the database again.
  
  Server starts now in making it past the catalog initialization but fails with a message "SEVERE ServerMain.failedToLoadSystemPackage".
  
  I have reviewed all the available logs and found no errors during installation or configuration and product log does not much to do. If you have any ideas on where I can look for more information or if you have installed 11.1 Essbase Studio on Windows Server 2003 can fall back you a post? I would like to compare some of the files, directories, and material properties.
  
  Thank you
  Kathy

  You can also first try to delete and re-create the user created for the catalog of Studio. Looks like the catalogue do not get properly initialized. If it does not, and then view the log file, and we can take a look.

  Thank you
  Aneel

• "Error 1002097 Unable to Load database" when starting an Essbase application.

  Hello the Essbase Experts,
  
  I am getting error below when starting an Essbase Application:
  
  "Error 1002097 Unable to Load database".
  
  An excerpt from the journal of Essbase applications:
  
  [2012-04 - 04T 14: 14:03.816 - 19:14] [RPP] [MSS-6] [ERROR] [32]] [ecid:1333566842161, 0] [tid:2058170128] impossible to lock the file
  
  [SID/essbase/user_projects/epmsystem/EssbaseServer/essbaseserver1/app/RPA/RPA/RPA.esm]. Essbase will try again after a short
  
  delay.
  
  [2012-04 - 04T 14: 14:04.821 - 19:14] [RPP] [MSS-5] [ERROR] [32]] [ecid:1333566842161, 0] [tid:2058170128] impossible to lock the file
  
  [SID/essbase/user_projects/epmsystem/EssbaseServer/essbaseserver1/app/RPA/RPA/RPA.esm]. Please make sure that other processes are not
  
  access Essbase files while Essbase server is running.
  
  [2012-04 - 04T 14: 14:04.821 - 19:14] [RPP] [MBR-89] [WARNING] [1] [] [ecid:1333566842161, 0] [tid:2058170128] cannot open
  
  [SID/essbase/user_projects/epmsystem/EssbaseServer/essbaseserver1/app/RPA/RPA/RPA.esm] for the database
  [RPP] [2012-04 - 04T 14: 14:04.821 - 19:14] [RPP] [SVR-97] [ERROR] [32]]
  [ecid:1333566842161, 0] [tid:2058170128] Unable to load the database [RPP]
  [2012-04 - 04T 14: 14:04.821 - 19:14] [RPP] [SVR-97] [ERROR] [32]]
  
  [ecid:1333566842161, 0] [tid:2058170128] Unable to load the database]
  [2012-04 - 04T 14: 14:04.835 - 19:14] [RPP] [SVR-97] [ERROR] [32]]
  
  [ecid:1333566842161, 0] [tid:2058170128] Unable to load the database]
  
  Please sugest pointers to start the application.
  
  Thank you
  KK

  usually when I see this error it means that a backup process put a lock on the file. The only way I iknow to clear, it is to restart the server (not the service, but the entire server)

• Essbase Studio error

  I am emptying everything that I don't use in the metadata browser. I am trying to remove something, but then I get this error:
  
  Mistake to destroy the declaration. Row = 143.
  
  Table of relationship refers to non-existent object. Report the error to Technical Support.
  
  Is there something in the backend db Essbase Studio to be removed?

  I had happen to 11.1.1.X Studio where I removed the artifacts that were used. It pipes the database completely. There really is an order you ERA to remove things. Basically, reverse order that they were created. With the help of the lineage is a good way to check where we use artifacts. 11.1.2.1 had much better to check see if oyu can delete everything first.

  At this point, I recommend restoring a backup system tables

• Error loading Essbase Studio

  Hi all
  
  I am trying to create a cube Essbase Studio v11.1.2. Its showing successful deployment with warnings... but when you try to view the data in the EA indicating his error msg
  
  Cannot run view cube
  Malfunction: Essbase
  
  I followed the link below to fix the problem.
  
  Essbase studio deployment error message
  
  I can find a rule of load with the name of the database and able to open it.
  Here, I can only see column dimension and the measure without data.
  
  Please tell me what to do next to display the data in the EA?
  
  
  Thanks in advance...
  
  Lolita

  I'll assume this BSO as you did, what you've done now is built, the hiearchies and data loaded Level0, now you need to aggregate these data at higher levels, in the OSI world, this is done generally by using a calc script that you can grow in the EA.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Essbase Studio Console cannot connect remotely to Essbase Studio Server

  Hey all,.
  
  I could use some help with Essbase Studio... I installed Essbase in distributed environment (Studio, Integration Services, and Essbase Server are installed on the same machine). Now, correct me if I'm wrong, I'm starting Essbase Studio Console, when you are prompted, I should enter the server name (address) Essbase Studio Server where, as a result, the machine mentioned above. It works fine, when it's done in client tier installed on this machine, but I can't seem to log on remotely (from another place), the error is: network communication with the server failed. Check your network connection and try again.
  Connection timed out: connect
  All advice? Thanks in advance.

  The studio console can be located anywhere and connect to studio server, if the server of the studio is definitely up and running, it could be a firewall issue, make sure that the ports of studio are certainly open.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Essbase studio startup

  Hi all
  
  I installed 11.1.1.3 on win2003 server. It works very well.
  
  When I opened the Essbase studio Console with from Studio Server manually every time it's show error
  
  Error connecting to Essbase Studio Server
  Reason network error-
  
  Please let me know how to start Essbase studio without starting Studio Server each time.
  
  Thank you
  Alain

  Hello

  The essbase studio server must be started before you can use the client, the client connections to the server studio.

  It's the equivalent of saying why can not I use customer EAS without starting the application server in Regional service.

  You can also set a studio as a windows service, have a read here

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Annex Essbase Studio to the Unix server - can previously enter us command in the Maxl Shell deploy?

  Hello

  I have essbase studio, where cubes are deployed manually on a regular basis to the EAS. Now, we intend to automate it, and our Essbase Studio and Essbase sitting on UNIX. I know that we can call the 'startMAXL.sh' of UNIX shell, but I was wondering, if I automate that, I pre-home/pre-store can do the command deploy somewhere in the script that calls startMAXL.sh and runs this command?

  My new shell script is:

  #! / bin/sh

  echo "the sript is about to invoke an another MAXL shell"

  pathToShell = ' / dataobi/.../bin/ '.

  chmod a + x $pathToShell "startMAXL.sh"

  SH $pathToShell "startMAXL.sh"

  When I run this script, it takes directly to the MAXL > tab and waits for the deploy command to enter. But instead, can he take the deploy command directly starting from somewhere and run it automatically?

  Please help me.

  Thank you

  Gibot.

  You can save the command deploy the Deployment Wizard (or create it manually), then in your shell script that calls startMaxL.sh to add the path and name of your file MaxL after him.

• Essbase Studio impossible to 'Examining the sample data' in the Oracle DB Data Source

  E.M.P. version 11.1.2.3.500

  Oracle DB 11.2.0.4

  on Windows 2008R2

  I created a user DB ESSTBC with the following user privileges

  CREATE SESSION, CREATE TABLE, CREATE TRIGGER, CREATE TYPE, CREATE VIEW

  This is my first attempt on the Essbase Studio, so I executed the following scripts as the user ESSTBC to create the TBC tables and load the data

  tbc_create_oracle. SQL

  tbc_sampledata. SQL

  I am able to connect with ESSTBC and select the tables all loaded and made sure the data is loaded correctly

  Then in the Studio of Essbase, I created a data source, which I can list all the tables in the schema ESSTBC in 'Data Source Navigator'. I also managed to create a Minischema by joining the tables SALES, SCENARIO, and MEASURES.

  However, in "Data Source Navigator" when I select "SCENARIO", right click and select "View Sample Data", I am able to pull data from the table. that is the table with all the names of columns grid but no data. No error messages were shown in "Messages to the Console.

  Back to Developer SQL and connect the same DB as ESSTBC, I have no problem do a "SELECT * SCRIPT;" and recover all the data of the table without a problem.

  I proceed creating dimensions elements then a hierarchy of "SCENARIO". But again when I try to get a glimpse of the hierarchy has got an empty tree. Apparently, there's something wrong,

  No matter what mark on what I missed?

  Thank you very much.

  Problem solved. The cause being my stupidity ruin a access DB. I can see examples of data without changing anything in Essbase Studio after you change the DB user rights.