Error loading specified c:\PROGRA~2\viwadefo\viwadefo.dll__The is not found module

Similar Questions

• svhost error: this application has failed to start because xul.dll not found. Reinstalling the application may fix this problem

  I got a message when I reboot my pc
  «svhost error: this application has failed to start because xul.dll not found.» Reinstalling the application may fix this problem.
  I need someone to help solve this problem.

  Let's see...

  I downloaded this zip file to see what was in it.  The version of the file in this download link xul.dll is approximately 2 years and version 1.9.0.14

  The version of the xul.dll of Firefox on my system (trying to keep up-to-date and all) is aged two weeks and version 5.0.

  I think I want to reinstall Firefox, but this isn't the Firefox forum.

• Error code 0 x 80070035 that the network path was not found.

  OT: error code 0 x 80070035
  My wife and I have 3 computers all running Win 7 64 bit. Two jobs and the third is a laptop. My desktop or laptop computer I can access any folder of each machine. However, when I try to click on my wife under 'Network' computer I get the message "Windows cannot access\\wife_desktop." When I click 'See details' it displays "error code 0 x 80070035. The network path was not found. "I'm running out of things to try.  I tried to use my desktop computer and notebook to help me check the installation on my wife's computer. I have updated owner and security settings in both car and system, as well as temporarily disable the firewall. Any suggestions would be greatly appreciated.

  Hello

  Method 1: Run the network troubleshooter and check out what he has to say.

  See the links below:
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
  http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters
  http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

  Make sure network discovery is enabled on the laptop computer, by default the State network discovery is disabled. If network discovery is off, please take the following steps to turn on.

  (a) click Start.
  (b) click on Control Panel.
  (c) click on network and sharing Center.
  (d) click on the arrow to drop down next to the network discovery.
  (e) click on the option, turn on network discovery.
  (f) click on apply.
  http://Windows.Microsoft.com/en-us/Windows7/enable-or-disable-network-discovery

  Method 2: The question can be caused also by your security program such an antivirus or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must activate new security that you was disabled programs.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off 
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  See the following link: http://social.technet.microsoft.com/Forums/nb-NO/w7itpronetworking/thread/028a3d13-f571-49e0-abe7-1ca61fb92082

• "Error while interacting with the scanner: the selected scanner was not found." Called brother and my MFC 7360N works very well with other programs to scan - only problem with Adobe Acrobat Pro 11.

  "Error while interacting with the scanner: the selected scanner was not found." Called brother and my MFC 7360N works very well with other programs to scan - only problem with Adobe Acrobat Pro 11.

  Hi davidd67669685,

  Please provide the exact point of the software & OS installed on your system. Also check if it is there any update available for the software after going through "help > check updates.

  Follow this thread to reset the Acrobat preferences:- How to reset preference settings in format Acrobat.

  You can check after connecting this scanner locally to the system if asked its connected on network & then look for the same thing.

  Please refer to this article:- of the troubleshooting tips for scanning questions when using Acrobat

  If the problem persists ask please check with another user account.

  Kind regards

  Christian

• Error loading specified C:\WINDOWS\ngrmpt.dll modual is not found

  I turn on laptop, windows starst upward, enter the password and login. Loading personal settings and when everything seems to charge to the top and ready to use, I get "error loading ngrmpt.dll C:\WINDOWS\ specified modual could not be found. I'm not that this will cause problems, but some downloads crash and things are generally slow (with laptop). Should I worry and can it be resolved? I want to sell this machine, so it is a mistake, I want to deal with. I tried various sought without success but also a few Microsoft ' difficulty his. " Thanks in advance for any input. B.

  Please read this:

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.

  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.

  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.

  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply turn off (uncheck the entry), reboot, and if the problem is resolved and things work normally and everything works fine, then delete the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  
  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  These comprehensive analyses can take some time, but you really need to run.  SAS will probably be just a bunch of Internet tracking cookies, but you can remove them.  Once you have done at least a full analysis, you can do quick scans in the future to save time and save the analyses complete for when you have more time or are really suspicious of an infection of the system.

  They can be uninstalled later if you wish.

  In 1985, there were 11 known computer viruses.  Today, there is more to 1, 122, 311 and the new threats are detected every day.  Always update your virus definitions before running a scan.

  Restart your computer and solve the outstanding issues.

• RUN DLL error loading C:\Users\Rahul\AppData\Roaming\zljirpe.dll__The specified module could not be found.

  I get the next message after starting my machine.

  RUN DLL error loading C:\Users\Rahul\AppData\Roaming\zljirpe.dll

  The specified module could not be found.

  PL. help me to remove this

  Rahul

  Hello

  Don't forget there is no program can detect or remove all malicious software, so you need to be thorough. Added easy
  to detect and remove malicious software is often accompanied by a much harder to detect and remove the payload. Do
  redundant and thorough work and then use the cleaning methods even if nothing was found. Better to be
  very careful now than to pay a high price later.

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Error loading C:\Users\Bo\AppData\Local\ukohixowe.dll is not a valid Win32 application

  Original title: ukohixowe.dll

  I have the following error message appears whenever I start Windows Vista:

  Error loading C:\Users\Bo\AppData\Local\ukohixowe.dll
  C:\Users\Bo\AppData\Local\ukohixowe.dll is not a valid Win32 application.
  In addition to the error message when my PC goes into mode 'sleep' & the monitor turns off, I am unable to wake up the screen saver.
  What is this error and how to fix it & the problem of monitor

  Hi Adrien,.

  According to the description, it seems that you are having problems with the startup error message and the computer doesn't wake up from its sleep.

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you perform the clean boot and check if the problem persists.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 3 of the article mentioned above.

  Method 2: Try the SFC (System File Checker) scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3: For the question about the computer is not waking from sleep, you may read the following article and check.

  A Windows Vista-based computer resumes the mode not sleep if you move or click a USB mouse as the computer is switch to sleep mode

   

  http://support.Microsoft.com/kb/930091

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Install the latest Firefox on Windows XP Embedded gives the error: "this application has failed to start because pdh.dll not found."

  I try to install the latest browser (normalized), sure I can the old computer of Windows XP Embedded. Hardware does not meet the 'recommended material' a Pentium 4 (it has a P3). I tried at first installation/bar of Firefox version 28, and that seemed to work well. Version 36 gives error that I said in the question. It is not essential that I run the * last * version of Firefox (the browser is ONLY used for an intranet application), but I would like to install the latest version that will work, and if there is a simple solution for this version, I want to explore that.

  Kind regards

   Gerrat
  

  Hi gerrat, it is probably best to use the version of esr firefox 31 in your case: https://www.mozilla.org/en-US/firefox/organizations/

• Since upgrading to FireFox 6, I can't start Firefox in Avast Sandbox - get the error "this application has failed to start because xul.dll not found." Firefox works well outside Avast Sandbox.

  The error box has the right
  Firefox.exe - Unable to locate component.
  He suggests reinstalling might fix the problem, but I've uninstalled and reinstalled firefox a number of times and no change.

  problem is Firefox works outside the sandbox avast, but inside the sandbox, xul.dll file is not found

  It is solved with these steps... some may be unnecessary
  (1) uninstalled Firefox
  (2) downloaded the latest version of FF (6.02) and installed
  (3) open the Avast user interface > extra Protection (in Avast v6) > Sandbox > Expert settings (button) > Web browsers > (in maintenance) "remove content" (button)
  (4) disconnected from Windows
  (5) connected and Firefox started in the sandbox

  It might be that the first 2 steps are not needed... but that's what I did and the problem was solved. As you can see in the screenshot, Firefox is virtualized successfully

• try to install itunes but get a win32 error message and ignore then an Apple Application Support is not found

  When I click on install to itunes, it goes very well until it will try to install it and then I get a weird error that the basis of this message is a win32 error. Then so I ignore this and itunes is able to be installed, but when I click on itunes, I get an Apple Application Support not found message! Eeek help someone!

  Hello

  1. What is the version of Windows installed on your computer? For example, Windows 7, Vista.
  2. have you done any software or hardware changes on your computer before this problem?
  3. What is the full win32 error message you get when installing itunes?
  4 is specific to the program the issue?
  
  Since we don't know the version of Windows installed on your computer, you can read the following general steps.
  
  I suggest you to bring to the version of Windows installed on your computer so that we can better help you.
  
  To work on the issue, refer to these methods.
  
  Method 1:
  
  Run the fixit from the link:
  
  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall
   
  Method 2:
  
  Refer to the steps from the link.
  Problem installing iTunes or QuickTime for Windows
  http://support.Apple.com/kb/HT1926
  NOTE: after you complete the steps suggested in the section (4) Disabling other incompatible software), you must start the computer in normal mode using these steps.
  For the Windows XP computer:
  a. from the Start menu, click run. A run (command prompt) window appears.
  b. type msconfig in the Open field , and then click OK. The utility of Configuration system opens.
  c. click on the tab general.
  d. Select the 'Normal startup' option.
  e. restart the computer.
   
  For Windows 7/Vista:
  a. from the Start menu, click all programs click Accessories.
  b. click run. A run (command prompt) window appears.
  c. type msconfig in the Open field , and then click OK.
  d. If Windows needs your permission to continue, click on continue. The utility of Configuration system opens.
  e. click the general tab.
  f. Select the 'Normal startup' option.
  g. restart the computer.
   
   

  In addition, you can also ask your question in the Apple discussion forums.

  https://discussions.Apple.com/community/iTunes

  Hope the information is useful.

• Then right-click on a program get error message in the PSD Shell extension resource file &#60; C_PsdRsDll &#62; not found

  Original title: lost file PSD Shell Extension

  When I right click on a program of an error box appears, PSD Shell extension resource file not found... What can I do to fix this?

  Hello

  1 does with a particular program, or with all programs?

  2. don't you make changes to the computer?

  3. What is the brand and model of the computer?

  Clean boot

  For the procedure to place the computer in a clean boot, open the site mentioned below

  http://support.microsoft.com/kb/929135.

  Note: to set the computer back to start normally, use the step 7 in the same link.

• -Pop-up message error when I start my computer: "TVAgent.exe - Entry Point not found".

  When I start my computer, the first message when I see my desktop is a pop up that says "TVAgent.exe - entry not found.» The procedure entry point not found PowerReadACValues in the dynamic library POWRPROF.dll. "I try to close it and it appears in the same as spot 10 times and then finally I can close it and it will not reappear. I tried a full sweep of the computer with Norton and it did not come with anything. All my programs and all seem to work fine right after, but I fear that there is something wrong. I am running Windows Vista.

  Hi Csiew42,

  Thank you for visiting Microsoft Answers.

  ·         Which version of Windows Vista is installed on your computer?
  ·         Remember to make changes to the computer recently?
  ·         Who is the manufacturer of your computer?

  I suggest to perform the clean boot and check if you get the error again. Clean boot will start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  (1) perform the clean boot (check the link to perform the clean boot).

  (2) enable half the services.

  (3) determine if the problem comes back.

  (4) enable half of the startup items.

  (5) determine if the problem comes back.

  (6) repeat the steps above until you discover which program or service is causing the problem.

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7: http://support.microsoft.com/kb/929135

  Hope the helps of information. Please post back and we do know.

  Kind regards
  Joel S

• Error when the appellation newly created folder: this item is not found

  Hello

  I found the thread when people are struggling to remove the folder.  However, I have the opposite problem.

  When I create a new folder, type to replace the name "New folder" and then on enter, I get this error:

  This item is not found

  It is no longer in C:\folder1\folder2.  Check the location of the item and try again.

  Two options: retry and cancel.

  I did Try Again and it works.

  How can I fix it?

  Thank you

  Found the thread with replies

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/renaming-folders-causes-item-not-found-error-in/e2cf38c7-9e77-4256-89DE-6308df53d5f9?page=1

• Cannot install HP recognition facial error files installation requirement visual c ++ ALT for 64_new is not found

  Original title: requirement visual c installation files + ALT to 64_new is not found

  I try to install HP face recognition for HP protect tools from my Elitebook 8560p and get an error for a C++ requirement.  It seems that I have all the possible C++ but not this one.  I have an I7 processor 500 GB hard drive if necessary.  Could someone please point me in the right direction.  I have C++ 2005 x 64 and x 86, C++ 2008 x 64 and x 86 and C++ 2010 x 64 and x 86.  I thought that maybe it was because it's a new computer and that he does not have to date and service packs again but worked right out of the box.  I reinstalled Windows Ultimate 64 that no chance.  Thank you!

  Hi kristophercline,

  In fact, it seems that HP software is not compatible with Windows 7 Ultimate.  Have a look here.  I would suggest contacting HP Support directly:

  http://WWW8.HP.com/us/en/support-drivers.html

  Thank you!

• Error loading C:\Users\kiebrea\AppData\Local\itavapupikepeqe.dll__The specified module could not be found.

  How can I reinstall the missing dll?

  ·                                You could have, or still are, infected by malware; and it could also be a starting top left him entry.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform quick scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configureAutoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner