Windows XP hangs just at the login page (no user connects directly to the)

Similar Questions

• I use Windows 7 on a computer to which a printer is connected directly by a USB cable. I am able to print, but cannot find the printer when I run control/devices and printers Control Panel

  I use Windows 7 on a computer to which a printer is connected directly by a USB cable.  I am able to print, but cannot find the printer when I run control/devices and printers Control Panel. In fact, no devices appear at all.

  Can someone help me with this?

  Thank you.

  See http://www.winhelponline.com/blog/fix-devices-and-printers-completely-empty-windows-7/

  If this does not help, there is a very long thread here, which may include other suggestions--> http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/devices-and-printers-dialog-box-empty/353707a4-bcb0-4334-98bc-aab84747fecd?page=1

• Windows 7 firewall, just after the power rules

  Hello

  Setting up a private workgroup-to-peer network (not homegroup, no servers or domain) of several PC windows 7.  Have all network connections, defined as 'private' of networks.  At that time, the private firewall is disabled, and the Public firwall is enabled.  Administration tool using remote third 3rd RAdmin connect and control the PC.

  Strange behavior just after turn on/off the PC.  Can ping from one PC to another, but RAdmin tool fails to connect to a PC on just.  The 'Public' windows firewall log shows the RAdmin TCP packet dropped.  Once someone has logged on locally to the computer and then connected to the wide, the RAdmin packages are no longer considered (fell or permitted) by the Public firewall, and the RAdmin progam works great.

  I added a test rule to allow all TCP traffic through any firewall from any PC, any user, any port, etc. (essentially large open) and still have the problem where RAdmin specific TCP packets are lost by the Public firewall.

  I can get it to work by setting the 'incoming connections' for the Public firewall to 'Always allow', but is not an acceptable solution.

  I worked with the provider of 3rd party s/w (famatech) and they also have no idea why it works this way.

  Any ideas how the Windows 7 firewall works right after that the PC is on, but before the user login?  Any ideas how can I do an acceptable firewall rule which will be in force after powering on, but before that the user log?

  Thank you in advance for any help or any other ideas,

  Rick

  Answered my own question.  Found that a set Local GPO do not merge rules defined by the user.  When I moved the RAdmin rule throughout the local Group Policy object, problem goes away.

• Why pc does not start, and the windows logo hangs after installing the update?

  often, I can't start my computer after installing updates. I push the button the windows logo hangs and windows did not start so I manually press the button close. After I press the button again the Startup Repair tool appears so I can get the windows works normally. but happening permanently since buying the laptop 2 years ago, but not after every updates. It happens randomly.

  Hello

  Method 1:

  I suggest you to use the Windows Vista disc to perform a Startup Repair:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair

  Method 2:

  If the method above does not help then you can check the link below and check the troubleshooting steps to resolve the problem.

  http://support.Microsoft.com/kb/934540

• How can I start to debug when iOS package hangs just outside the compilation without debug mode?

  Hello

  I have an application that I'm migrates from the web to mobile, and I recently encountered a problem where it will crash on the charge, but _ONLY_ when they are packed for liberation as well as iOS.

  FOR EXAMPLE:

  1. for Android, works at

  -Emulator

  -USB debugging

  -release mode compilation

  2. for iOS, works in:

  -Emulator

  -fast compilation USB debugging

  -USB debugging standard compilation

  Doesn't work in:

  -compile ad hoc

  Initially, I thought it was because of loading SWF with ActionScript, but even after replacing these files with static JPEG, it always crashes.

  I commented all the traces, after another report by the forum that has listed the tracks as a problem with ad-hoc compile.

  I tried mobile bundle strings resources out of the sight of problem that these channels are not displayed in the view of problem (but do it somewhere else).

  In all cases, the result is the same:

  Discover loads then freezes before he gets far enough set navigatorContent property (declared in MXML) so it hangs just with no. visible labels.

  Have you tried a number of things to debug it and twenty minutes by compilation, there is a limit to how much I _can_ try, so, please, please, someone has an idea of where to look the potential problems that could be causing my application to fail?

  Thank you

  Gaius

  I have it.

  I used the Swiz (which is awesome, btw) framework and compilation of the library of Swiz rather that to use the CFC that I needed a change to the base, I forgot one of the metadata tags since the compiler args - for some reason, recovered by operating in any other mode of compilation, it crashed when running in release mode.

  G

• Windows 7 hangs for an hour up selecting a user in addition to comments

  I have a Dell N3050 which my last HD out crapped on new drive installed.

  After installing windows 7 with SP1 on a new hard drive of 1 t, I was able to connect to my users normally. But after I connected to the internet and installed the windows updates record on any newly created user, or old except for comments takes an hour to arrive.

  I tried the following and in safe mode starts normal. And also played start diagnosis and it passes without flaws.

  I tried step 2 clean boot and still have the same question. Have reloaded windows 7, 2 times with the same result ok until the updates of windows to the low load. Step 1

  1. reboot your computer.
  2. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  3. using the arrow keys, select the desired option of Mode safe.
  4. press the Enter key on your keyboard to start in safe mode of Windows 7.
  5. when Windows starts, you will be at a typical logon screen. Connect to your computer and Windows 7 goes into safe mode.
  6 do whatever tasks you need and when you are done, reboot to return to normal mode.
   
  If it works fine in safe mode try performing a clean boot in order to find the cause root.
  Step 2.
  You can try a method clean clean boot to find out which application is causing the problem.
  Clean clean boot.
  1. click on start, type msconfig in the search box and press ENTER.
  The user account control permission.
  If you are prompted for an administrator password or confirmation, type
  password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load starting points.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.
   
  If the problem is resolved to check what is the cause of the problem, referring to the link given below:
  http://support.Microsoft.com/kb/929135
   
  Also, you will need to uninstall and reinstall the software problem on your computer.

  
  Reset the computer to start as usual
   
  8. When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  9. click on start, type msconfig.exe in the start search box and press ENTER.
  10. If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
  11. When you are prompted to restart the computer, click on restart.
   
   

  Hi Ron,

  Thanks for posting on Microsoft Community.

  There may be several reasons such as the computer infected with a virus, drivers, conflicts with other programs, malicious software and memory, damaged user account, corrupt Windows system files or if you have made significant changes to hardware or software. As you've already tried in safe mode and the clean boot and don't you did not help. Please, try the methods below and see if it helps.

  Method 1:

  Try the procedure described in the following Microsoft Help article.

  http://support.Microsoft.com/kb/2681286

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. During these 10 days, it will remove all the files infected by the virus and records. I suggest you create a backup of your data, and then install Microsoft Safety Scanner.

   

  Method 2:

  Try the procedure described in the following Microsoft Help article. This issue may have caused due to corruption of the user profiles.

  http://Windows.Microsoft.com/en-us/Windows/fix-corrupted-user-profile#1TC=Windows-7

  I hope this information is useful. Please answer us with the State of the question, so that we can help you further.

• Windows xp locks just after the start

  It just started last night and today I got a call from someone calling themselves repair windows (come call of the India) and they state they know bad files have been downloaded on my PC one it needs repair - someone else has had this or know how I can stop what's happening, it starts and then once I got to the main screen of windows the pc just crashes.

  If you can not connect mode without fail, your next logical step would be to try the Recovery Console.  Once in the recovery console, you can try to perform a disk check where the problem is caused by a problem on your drive.  You must type a command like:
  CHKDSK C: /R

  "How to install and use the Recovery Console in Windows XP"
    <>http://support.Microsoft.com/kb/307654 >

  If this does not work, you can try to replace your registry to a backup files.  The best way to proceed is to boot from a bootable CD (I like to use floppies for Linux Live free like Knoppix, but there are other CD based on Windows, you can create such as Bart PE, UBCD4Winand Hirens ) then follow the General steps of KB307545 from part 2, step 6, using the interface graph normal user on your boot CD to move and copy files rather than the instructions of line of order in the article.

  Otherwise, you can use one of the above CD boot (or your install in another computer disc) to back up what files you can on a USB hard drive before reinstalling Windows.

  HTH,
  JW

• Windows XP hangs after installing the new drive hard & software

  My 20 GB hard drive was almost full and the computer (Dell GX240) has been slow, I installed a new 160 GB drive. After loading Windows XP, Linksys, McAfee, MS Office and MS Windows updates would crash randomly. Restart the system would allow him to run for a few minutes and then hang again.
  I reformatted the drive and partitioned to 80 GB and then reloaded all programs above with the same results.
  I reformatted back to 20 GB, loaded XP and Linksys and the same problem occurred.
  It seems that the internet has something to do with the problem.
  Any suggestions?

  "Wingnut555" wrote in message News: 6aac2f2a-ffb6-4a22-98e1-67417709eb6b...

  The drive of 20 GB that I removed to install the largest capacity disk has been reinstalled after the failure of a larger. I am currently running on the same pc and the old drive. I have another drive of 20 GB that had XP installed on it earlier. Thinking that I might try that one that I started to load some of my other programs operating and when I installed Office 2007 for household use and selected updates online blocked system shortly after. The problem is therefore not only on new facilities. The reader that I use currently a Office 2007 is installed and it works fine.

  What is the largest disk that will handle XP? I heard it's 137 GB, is it true? If I can make it work how would you recommend I have partition the drive of 160 GB?

  Thank you

  XP can handle drives of 1 TB to NTFS without problem - it's the motherboard on computers more elders who may have problems, that it is not compatible LBA.
  There is really no need to partition the disk, but I would tend to opt for about 60 GB for the operating system and 100 GB of data and then move the folder My Documents (using the option in its properties) of the data partition. This allows to separate the data and programs and means a lot less work if a reinstall is needed.
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• How can I get all research applications to open in a new tab and not the current window. I just downloaded the new FF8

  In my previous version of FF, whenever I did a search with any search results open in a new tab. Now with FF8, the results open up the active window that is really annoying. How can I get the search results to open in a new tab instead?
  I have Windows xp FF8

  You are welcome

  If you have changed the settings in the options to search for Google (http://www.google.com/preferences?hl=en) links should open in a new tab if you click on them. You can always Middle-click on a link to open the link in a new tab.

• 10 improvement of the Windows path hangs on "place the external storage and press OK.

  Hello

  This will be my first post on this forum.

  A couple of weeks ago, I bought a Toshiba SATELLITE CL10-B-103 for my son. The CL10-B-103 has installed Windows 8.1. Tonight I plan to make the installation of the Windows 10 upgrade because Windows 8.1 announced that he was ready for the upgrade.

  The trial progressed slowly but smooth and without problems until now... As the laptop is equipped with only an HD 32 GB the trial upgrade was informed that I had to stick a USB key. After that, the trial continues slowly but smoothly, but who did not question because I had all night. However after the first reboot of the system when he was about 60 or 66% of installation of process this error message showed: place the external storage and press OK. It's very strange since the key USB has been removed at all and was still in the system. It is strange, is that both the OK button as the Cancel button are not selectable. Without passing by the touchpad, not a tab or an entry.

  Some community online Windows 10 post mentions that, via the BIOS, the system must be initiated from this USB key. I tried to reboot the system with DEL, F2 or F8, but I couldn't get into the BIOS and wasn't able to change the boot sequence.

  After each "restart" the same error message appears. It does not matter that the USB is in it or not.

  So, my conclusion is that my CL10-B-103 is suspended/East in a loop. I don't know how to proceed.

  Please, I can really use some help.

  Thanks in advance.

  Because it seems that I can not only edit/change a message I am answering my own post now...

  The problem seems to be resolved. When I was able to use the touchpad I could push the OK butten and the upgrade product now.

• restart Windows homescreen befor (just past the loading screen)

  Help, please!

  As I said, windows restarts right after the loading screen, but this isn't the only problem after BIOS screen (first), my keyboard no longer works, so I can't choose to load bootable disc or choose Safe mode!
  now my pc restarts again and again! and I don't know what to do! Please help :(

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/308041#3

  It will be useful.

• Windows Vista hangs after choosing the identity of the connection. works well in safe mode

  I was able to start windows in safe mode, and then create a new connection profile.  However, Windows doesn't always starts normally.  Using the original profile causes the screen to go black after the "Welcome" screen  Using the new profile causes the screen to go to blue after the Welcome screen.  It's a laptop with nothing fixed.  everything seems to work fine in safe mode, so I think it's a matter of profile.  There is no restore points, so I can't use system restore.  Any thoughts?

  Bob J

  Hello Ripplemaker1,

  I have to agree. This sounds like it may be some kind of malware in game.

  I recommend you create a new thread in the forum security, privacy, and user accounts for this piece of the puzzle.

  Best regards

  Matthew_Ha

• How to display the login page after having connected the laptop WiFi

  Hello

  I checked into a hotel that offers Wifi access.

  The first day, I connected to the Wifi where I select the appropriate name of Wifi since connection manager and also enter the security key that was provided to me. The navigation was very good.

  But on the times later, once that I selected the name of Wifi is no longer is asking for the password. The report shows 'connected' (to correct Wifi Hotspot) but also says -online access Internet No.. (although the connection strength is 'Excellent').

  I have taken note of what happens sometimes when I connect to my Office Wifi as well. Sometimes, need not the password, he said still "connected" but also "no Internet access", and I'm not able to navigate.

  With the diagnosis has not helped.

  Y at - it a solution to the problem for example force Windows to display the password prompt.

  Thank you

  Sanjay

  Hello, Mr. Ray,.

  Thanks for posting your query in Microsoft Community.

  I understand that, even after be connected to the network once chosen, no internet is available. Generally, you are asked the password for the first time and the next time when you try to connect to the same WiFi network, it connects automatically without the password. However, there are several other reasons for not being able to access the internet thought that the device is connected to the same network successfully.

  I suggest to refer to the article below and check if the problem still persists.

  Wireless and wired network problems

  If the problem persists and you try to use the Wi - Fi connection in the hotel and office, this network would be connected to a domain or has administrator privileges. This is why I would recommend posting your query in the TechNet forums as your question would be better suited for IT Pro audience.

  Please post your question in the TechNet Forums.

• Windows live login page my profile picture used to be displayed, but now it of just the standard face icon by default, how do I get my rear profile picture?

  As I said in the title, on windows live login page my profile picture used to be displayed, but now it of just the standard face icon by default, how can I get my rear profile picture?

  Hi SteveWoodhead,

  Thank you for visiting the Microsoft answers community.

  The question you have posted is bound using Windows Live and would be better suited in the Center of Windows Live Help solutions. Please visit this link to find a community that will provide the support you want.

  Thank you!

• Windows 7, last user in the login screen and 'User', losses other accounts in the login page

  I am running Windows 7, it was a new installation. Since I set up my machine, I created 3 accounts in my system and in the login page I always had the possibility to choose one of these accounts.

  1 user 2 3

  Since last weekend, when I try to change username, I have just the last user who was logged and a "Different user" option (no image that it incidentally) where I need to type the name of the user who wants to go to and the password.

  Last known--> if another user select this--> I need to type the user name and password for the user newactive

  How to restore the possibility of having all my 3 available users in the form of connection with their photos?

  Thank you!!!

  I would like to use system restore to set up Windows in three days.