error message "CC4-202-0000008" on Brother MFC-9130CW

Similar Questions

• Brother MFC-9130CW scanner no longer works with Windows 7

  My MFC-9130CW scanner stops inexplicably scans to my PC one day.  It worked great for several weeks but now, whenever I try to scan (either from the machine itself or the center of Brother on my computer), a generic "scanning failed" message appears.

  I contacted Brother support and they had me uninstall all software/drivers Brother and reinstall them, but I get the same error message when trying to scan.  IP address of the machine is valid, it is connected to our wireless network (I can print wireless) and I have even disabled the Windows Firewall (as support suggested brother).  Nothing works.  I am at a loss, because I have not changed anything that is related to my OS.

  The fact that you cannot scan even from the front Control Panel suggests that the machine has an internal problem that could fix only repairers specialist Brother or printer...

  There is a one year warranty on the machine. You should get it back to brother as soon as possible if the warranty is still good...

• Brother MFC-6520DW UK

  I just bought a Brother MFC-6520DW, but having problems using the features installed Control Center 4 or Paperporte. Comes with error message CC4-202-0000008 impossible to locate the PC, it is with a USB connection. I saw some answers to similar questions and have tried their responses, but can not solve. I am able to analyze through Control Panel devices but unfortunately this gives only a basic scan with no way of using PDF etc... Yes PC knows that the scanner is there and that can only be via USB connection I guess. Maybe it's not a problem of Windows 7, but maybe the Brother software. If I'm something contradictory by running a scanner Epson on the same PC?

  Any ideas would be welcome.

  Hello

  I'm happy to have helped. Sounds like you were doing a few very good troubleshooting!

  (If a response has been the solution please mark as 'response' or if it was useful)
  Please, mark it as "Found this useful - Me Too. Help others find the
  solutions to follow.)

  Move every day, go further

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Receive the error message"MFC-7860DW LAN is not found" when scanning

  Original title: printer all-in-one Brother MFC-7860DW after Windows update problem

  Shortly after that I installed an update through Windows for my Brother multifunction printer, I could not scan documents to my printer wireless to my Toshiba laptop.  I got an error message saying "MFC-7860DW LAN is not found."  Yet the wireless connection between the printer and the router is fine, and I can print from my computer very well also.  I did this for a long time so I have something had happened recently.  The update was allegedly from brother.  I spoke with the brother support and they gave me a way to scan the computer using Windows Fax & scan, but I really need to be able to make it from the printer itself.

  I have reset the PC to a restore point before that I did the update of Windows, and I uninstalled and reinstalled the software of the printer 3 times, including the connection with the wireless system, all without effect.  When I check the Brother Installation Diagnostics file, it shows that the scanner driver has no installation and connection.  All the other drivers installed correctly.

  Any ideas how to install my scanner driver?  Thank you!

  Try Ronald ron's response

  Altho, reg cleaner ccleaner can erase valid entries reg sometimes. So, I don't know if I would use that

• Brother MFC-7340 - DRUM ERROR

  I put a new cartridge in Brother printer MFC-7340 drum. As soon as I insert the drum into the printer, the message 'error drum - see Troubleshooting and Routine Maintenance chapter in user's Guide '. This message is displayed regardless if I put the ' old/used' or 'new' cartridge into the drum and insert it in the printer... it is still the same message and do not print!

  The user guide does not seem to respond to this "drum error". I would be happy to receive a response to this situation.

  Thank you in advance!

  Tony

  Hi Tony,.

  Following error messages continue to appear if the drum counter was not reset when you replace the drum with a new one.

  I suggest you try the procedure described in the article and see if it helps.

  http://welcome.solutions.brother.com/BSC/public/us/us_ot/en/FAQ/FAQ/000000/002800/000037/faq002837_000.html?reg=us&prod=mfc7340_us_as&c=us_ot&lang=en#other-FAQs

  If the problem persists, I suggest you to contact brother Support for assistance.

  http://www.brother-USA.com/support/custserv.aspx

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Brother MFC-J615W prints & scans through wireless computer, but not the printer itself, error tw006 comes up, how to fix this?

  I tried for several days to get my Brother MFC-J615W do wireless...  I am able to print and scan from the computer but not scan from the device MFC-J615W

  I have:
  Brother MFC-J615W all-in-One
  Windows 7 Home Premium 64-bit
  McAfee Security Center
  Cisco Linksys e2000 router wireless
  I have installed:
  Full driver & software package of brothers website
  ScanSoft Paperport 11SE (scanning software) from the CD provided with the MFC-J615W...
  I tried to scan to Paperport and Control Center 3, but I get the following on my computer when I push the scan button on my printer itself unit...
  Control Center 3-2 errors:
  "Unable to connect to the device.  -If the device is OFF, turn on the device. -Check the I / F cable connection between the device and your computer.  -If the device works on the other post, wait until the task is completed. [TW006]
  "Unable to scan.  Please try to scan the image, once again, if the error occurs again, please reboot your computer and then try to start a new search.  (CC-205-03031f04) "
  PaperPort error: "No Scanner" the default parser is not attached.  Please attach your default scanner or click on the "Select" button to choose another scanner.
  _____________________________
  I can't do anything else in the Control Center 3 but I tried to select the scanner itself in Paperport, which is ' TWAIN: TW - Brother MFC - J615W LAN' a when I hit the scan on the printer, it defines one then the same scan by default to "WIA" error comes again.  Moreover, there is also a ' WIA: Brother MFC - J615W LAN' option in available in Paperport scanners.  The WIA option does not work when I scan in paperport, TWAIN but makes...
  _________________________________________
  I first tried to install the drivers from the CD, but it does work very well so I uninstalled and did a system restore to before that I installed everything...
  Can someone help me?
  Thank you...
  Jesse

  Hello

  1. you receive the error message only when you scan directly from the Brother MFC-J615W printer?

  2. are you able to scan or print from the computer to which the printer is connected?

  If the problem occurs only when you try directly scan at the printer, then I would suggest that you contact the support of brother about the question.

  http://www.brother-USA.com/support/

• I received an error message after installation encyclopedia British and this application cannot be open.showing the "Startup MFC application has stopped working". How can I solve this problem?

  I received an error message after the installation of Encyclopedia Britannica and this application cannot be open.showing the "Startup MFC application has stopped working". How can I fix this?

  Hello

  always check the compatibility of vista programs on the link below

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  If a program is compatible with vista you can try right click on the setup.exe and then by selecting run as administrator to install it

  It is not compatible with vista, you can try running it in a previous operating system mode

  This does not work for all programs

  read the information below

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  ____________________________________________________________

  and read this information MS, too

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-the-program-compatibility-Wizard

• DIFx Driver Package install error = 536870141 when you try to install the MFL-ProSuite for a Brother MFC-J870DW printer all in one

  Hi everyone, I have read the various issues pertaining to the Brother software and the IS052 error that I got also.

  I spoke with brother two times and they tell me that I'm missing a driver and if I sent the error message DIFx Driver Package install error = 536870141 to Microsoft, they would be able to provide me with the driver I need.  Brother also had me try to install from the disk and also on their site and I got the same error.

  I am a home user, so not very technical when it comes to drivers, etc..  I know that you need.  So please don't you technique on me.  I have been messing around with this now for almost 2 weeks and can that copy and print.  I can't scan or fax due to this error when you try to install the software.

  I have the disk with the drivers on what I did when we first got the computer.

  I use Windows 7 64-bit.  I really need help so I hope that there is someone who can solve this problem.

  Thank you very much

  Judy F.

  SW Florida - USA

  Karthik, sorry it took me so long to answer.  I hate it when people do that to me then again I am sorry.

  After trying your suggestions, nothing seemed to work so I asked my son who is a type of systems to help me.  I he provided with suggestions and error message, etc..  He read about all this and then remote connected my suburb.

  He renamed the errorlog and then tried to reinstall the Brother software and got the error.  He was then able to read this file was causing the error without reading through the tone of the error messages.  It turns out that there is a file that brother was looking for in one place, but it was in another.  He copied to where brother was looking for her, has done a reboot, loaded the software without problem.

  I am now scanning and everything works as it should.

  So maybe it's the same problem that others causing a problem.  If they can get the steps to find the error Log, look at the error message that is created in the error log, which will tell them what brother file cannot find and then go from there.

  I don't think I could have done myself, but he knew where to look for such things, and I don't have.

  Thanks again for all the help I got from this forum.

  Judy F.  (a happy user of printer Brother)

• 2203 error message when you try to reinstall the brother printer driver

  deleated Avast to install Microsoft security essentials and lost my 4 for my Brother printer service center.  When I try to reload the software for the printer 2203 error message comes up saying there is a problem with Microsoft Visual C++ 2005.  any thoughts?

  Hello

  Follow the instructions in the Amrita 'Reset permissions'

  Run Windows Update > Search updates

  Install all the C++ Redistributable packages

  Resave msiexec (Windows Installer)

  Press Windows key + R

  Type msiexec /Unregister

  Press Ok

  Press Windows key + R

  Type msiexec/regserver

• Brother MFC - J475DW 1006 printer drivers error

  Original title: Brother MFC-J475DW printer drivers

  Cannot install the CD drivers get error error installation of the DIFxDriver Package 1006

  Never use a printer installation disc to install windows drivers 8. The disks are obsolete. You get victory 8 drivers and software of brother. If there is no drivers for win 8, you can try to win 7 drivers and install in compatibility mode. If there is none of these, buy a new printer. Printers are good markets - ink is the profit machine.

• I downloaded for brother's keeper genealogy software and got the error message comdlg32.ocx is not properly registered a file is missing or invalid

  I tried the following:

  -J' downloaded comdlg32.ocx from a source linked and registered successfully in c:\windows\system32. Restarted. Tried to open the program and got the same error message.

  -Uninstalled program. Downloaded again with mozilla set to run as administrator, rebooted, got the same error.

  -Recorded in system32 times Comdlg32.ocx and the folder of the program in c:\program files, set to run as administrator, program can always put the error message.

  -Tried to set the compatibility to Windows XP program, get the same error.

  -Tried to set compatibility to run as administrator.

  The program will run in Mode without failure. I'm just an average user and I'm frustrated to the point of tears. Can you please help? Thank you.

  Thank you very much for the help.  I solved the problem by uninstalling the software and then create an admin login.  I logged in as admin and downloaded the software, installed, then it worked fine.

• Brother MFC-7820N update fails with error 80070490

  Original title: Brother MFC-7820N failed update

  Apparently, I have to use the construct in Windows 8 pilots for the Brother MFC-7820n (connected via a network). I can print fine, but cannot scan. None of the drivers of brother works for the installation of the scanner. After talking with brother, they said I should use Windows Update to get the latest drivers. I tried this several times, but the update fails with 80070490. Any ideas?

  Original title: Brother MFC-7820N failed update

  Apparently, I have to use the construct in Windows 8 pilots for the Brother MFC-7820n (connected via a network). I can print fine, but cannot scan. None of the drivers of brother works for the installation of the scanner. After talking with brother, they said I should use Windows Update to get the latest drivers. I tried this several times, but the update fails with 80070490. Any ideas?

  According to brother Tech Support, brother does not support scanning or PC to Fax printers MFC (connected Ethernet) network.  Here is a direct quote to support Brother on 24/11/12:

  «Currently we have everything planned out a complete set of MFL Pro Suite software (Control Center, send/receive PC - Fax, etc.).» Scan of the MFC
  on a network connection is not supported by the built-in support to
  Windows 8 operating system. "

• Brother MFC 7820N does not work after upgrade to El Capitan

  I installed my OS to El Capitan. My multifunction Brother MFC 7820N printer was working perfectly before the upgrade. Now, I get an error message indicating that the printer is not connected, even though it is. He is unresponsive to the print command, and I can't find new compatible drivers on the Brother site. Any suggestions?

  If you haven't already done so, try to reset the printing system.

  Reset the printing system - OS X El Capitan

  You may be able to find a driver here.

  Gimp - Print

  HPIJS for Mac OS X

• I have a new Tower (Windows XP [6et7]), but I can't get my Brother printer to install/work. It is a Brother MFC-420CN purchsed 2006.

  EJE

  I have a new Tower, but I can't get my Brother old Multi-funtion machine to install.

  work (MFC-420CN).  I can not even find a free driver.

  EJE

  Hello

  • What happens when you try to install it?
  • You receive an error message when installing it?

  I suggest that you try to install the drivers make this link:
  http://welcome.solutions.brother.com/BSC/public/us/us_ot/en/model_top/colormfc/mfc420cn_us.html?reg=us&c=us_ot&lang=en&prod=mfc420cn_us

• Troubleshooting installation printer driver on the computer. error message: "the arguments are invalid.

  I recently purchased a Brother (MFC-J265W) all-in-one printer that has a wireless capability.  I finished configuring wireless from the machine, however when I tried to install the printer drivers by using the CD-ROM, the installation failed because an error message indicates that "arguments are invalid".  I contacted brother customer service and they said it's a matter of Microsoft.

  A few details:

  I use Microsoft XP Home edition 32 bit SP2. It came installed on my laptop (Acer).

  I've uninstalled and reinstalled the driver several times, but I get the error message.

  I tried to download and install the latest driver from the Brother Web site, but I still get the error message.

  Specifications (in the manual and on the Windows website), the printer IS compatible with Windows XP.

  I would like to know how to solve this problem and also to understand what means the error message.

  Thank you

  When a hardware vendor says "It's a problem of Microsoft", without providing further details, you can be sure that you talk with a person of lazy tech support who wants to end the call and does not know how to solve your problem.

  I suggest that you completely uninstall some pieces of the printer driver and the associated software are already installed using the directions here: Article 1.  Then, disconnect your computer from the Internet, run your antivirus application disable (disable realtime protection) and install the printer as if you planned it or connected to the computer via the USB port, but do not connect the USB cable until you are prompted to do so.

  If you successfully installed printer as a USB printer, converting the wireless connection should be reasonably simple :-).

  If the above procedure doesn't help, especially if you get the same error, return brother support and request that escalating the issue until you find someone who can help you.