Error message "device error - sense Code (6-28-00).

Try to burn a project composed of MP4 video files (about 2 1/2 hours in length) and when it reaches about 97%, I have this message "Device error - Code detection (6-28-00) - no loan average exchange" and then first elements 9 processes in order to burn a perfect DVD with menus and everything.  Any ideas?

SenseCode errors are often caused by hardware problems with a multi-lecteur (burner) and can be perhaps old firmware in the Multi-lecteur, or connection problems on the network, between the Multi-Player and the operating system. I would first check the updates of the firmware of the mfgr of the multi-lecteur. Web site. Don't forget to read the instructions for "flashing" the ROM with updates firmware - VERY IMPORTANT - follow these instructions to the letter!

They can also be caused by problems of blank media, like bad blank media, non - RW media, which has already been used or RW, which has not erased.

What brand and type of blank media are you using?

Good luck

Hunt

Tags: Premiere

Similar Questions

  • Device error - sense Code (5-26-00)?

    Hello world...

    Another problem with PrE8.01.  I got this error code: "device error - sense Code (5-26-00) - invalid field in parameter list - general" after media coding and compilation of burn on the disc.  I have a dvd/bluray pioneer (new) engraver who worked before (not with PrE8).  Any suggestion please?

    Ben

    I asked questions and made recommendations in your other thread, so I won't repeat them here.

    For your burning problem:

    1. Looking for an update of the firmware of your player. You described the machine as good as new, it might well be exceeded.
    2. What brand of media you try to burn on?
    3. To a DVD, use the option "burn on the record. This ends?
    4. Play the video (from step 3) in a DVD player software (VLC is good and free if you do not). This play OK?
    5. Burn the file on a DVD using a burning tool stand-a-only (ImgBurn is good and free if you do not). Make sure that you burn not higher than x 4 speed. The burn ends? He plays on a DVD player connected to a TV?

    Post back with your answers please.

    See you soon,.
    --
    Neale
    Insanity is hereditary, get you your children

  • IDT high definition audio CODEC. Error: the device cannot start (code 10)

    Original title: IDT high definition audio CODEC

    My Dell Latitude D620 has no sound control or (other than the system beep) volume, the volume control buttons do not work. When I uninstall and reinstall the IDT, I get an error message - "device cannot start (code 10).» Help!

    Hello

    1. have you done any change in software on the computer lately?
    2. What is the brand and the model number of the sound card?

    Method 1.
    Follow the procedure step by step in the article below and check.
    No sound in Windows
    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

    Method 2.
    If the problem persists, follow the steps listed in the article below and check.
    How to troubleshoot sound problems in Windows XP
    http://support.Microsoft.com/kb/307918
    Note: You can visit the website of the manufacturer of the computer to get the latest drivers for Windows XP and install it.
    I hope this helps.

    See also: related errors Description 10 Code that generates the Device Manager in Windows on computers
    http://support.Microsoft.com/kb/943104

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • sense code 43e02

    Authoring of disc in Encore.  I got this error:

    "Still could not complete the operation due to a hardware error (sense code 43e02).  Contact the manufacturer of the hardware for more information. »

    I have a machine ADK Media

    Intel i7 - 3770 k cpu @3. 50 GHz

    32.0 GB OF RAM

    64-bit operating system

    I'm burning Phillips + R double layer

    I opened again as administrator

    I tried to burn it on the slowest speed

    I tried to burn a small project to a disc single layer and got the same error.

    rebooted and tried to create the new project with one of the same files - error

    created an image disk successfully

    I am running CS6

    Help

    > successfully created a disk image

    Use the FREE http://www.imgburn.com/index.php?act=download to save files or folders or ISO on DVD or BluRay drive (send the author a PayPal donation if you like his program)

    When you write on the disk with Imgburn, use speed SLOWEST possible setting, so your burner has the best chance to create "good, well trained" laser drill holes... Since no DVD drive is required to read a burned disc, have a 'good' after a try to white high quality will help

    Use Taiyo Yuden simple layer or layer two Verbatim or Falcon Pro for layer two printable inkjet

  • Installation of driver with PXI-8360 error "this device cannot start - Code 10"

    While trying to install PXI-6541 to the PXI-1036 chassi with controller PXI 8360 [express-8360 side laptop], the error message "this device cannot start [Code 10]" laptop is Lenovo T60 with the latest version of the BIOS

    Thank you

    Manu

    Sounds great Manu,

    I also followed on that for you, then you should be getting approval sometimes today.

    I hope for the best

  • I can print Microsoft Word and Excel documents, but I am not able to print from the web. I get an error message that says: "Activation - Code 20' - error"Printer Not Activated".

    Activate printer F4580

    I run Microsoft Vista.  I have a printer HP F4580.  I can print Microsoft Word and Excel documents, but I am not able to print from the web.  I get an error message that says: "Activation - Code 20' - error"Printer Not Activated".  What should I do to correct this?

    Hello

    ·          What browser do you use to connect to the Internet?

    The error may occur if the wrong printer is set as default, the printer driver printer is missing, or if there are conflicts in Device Manager.

    Step 1: Make sure that the desired printer is set as the default printer:

    http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  • I'm trying to send some files to an external drive but error message: device i/o error.

    I have an external drive that is used only for embroidery designs. I am trying to send a few folders on the drive but get the I/O device error message. What should I do to fix the error?

    Original title: error message: device i/o error.

    It may be a cable, a system problem or failure of the HD.  You have saved the data?

    You can test the drive by running chkdsk /f as indicated below

    A CHKDSK F: /R

    CHKDSK WARNING: while running chkdsk on the drive if bad sectors are found when chkdsk attempts to repair this sector all the data available in this area may be lost.

    Run CHKDSK/r/f of a high (run as administrator) command prompt.

    Do this for each hard drive on your system.

    When he tells you, he cannot do at the moment – and ask you if you do not want to do it at the next reset - answer Y (for Yes) and press ENTER.

    Then restart and let the test to run.

    It may take some time for him to run, but keep an occasional eye on it to see if it generates errors.

    http://www.howtogeek.com/HOWTO/Windows-Vista/Guide-to-using-check-disk-in-Windows-Vista/

    See "CHKDSK LogFile' below to verify the test results.

    B Elevated Command Prompt:

    Click on start and type "cmd.exe" (without the quotes)

    At the top of the search box, right-click on Cmd.exe and select "Run as Administrator"

    C CHKDSK LogFile:

    Click Start and type "eventvwr.msc" (without the quotes) and press enter

    Expand the topic the Windows logs, and then select the Application log file entry.

    Double-click the Source column heading.

    Scroll down the list until you find the entrance to Chkdsk (wininit for Win7) (winlogon for XP).

    Copy / paste the results in your next post.

  • I am trying to download the trial version of DC Pro and at the end of the installation get an error message indicating an invalid code has been provided - what should I do?

    What should I do when I get an error message relating to a code not valid when you try to download DC Pro?

    you don't need a code/serial number to install a trial version.

    Available downloadable Setup files:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  • I can't reactivate my e-reader with my existing Adobe ID and password which are both correct. I alwayss get the message "the server activation Code error: E_AUTH_NOT_READY" what kind of problem is this and what is more important, how can I resolve it quic

    I can't reactivate my e-reader with my existing Adobe ID and password which are both correct. I alwayss get the message "the server activation Code error: E_AUTH_NOT_READY" what kind of problem is this and what is more important, how can I resolve it quickly. I'm on vacation and you want to read. Thanks for the quick response.

    Yes, actually I talk about digital editions. Do you know how to solve the problem, as stated in my first mail of Digital Editions? Thank you for your kind cooperation.

  • Solved: Error 0x80072ee2 Code and problem of invalid key when the key is invalid

    The problem with computer problems, it's that they can lose a huge amount of time trying to find the right solution that actually works.
    The reason why I created this issue and the solution is because I don't think that anyone allowed to solve the problem and I don't have the time to answer each question.

    Maybe the administrator can warn everyone and copy the message to the response section wherever it is, thank you.

    This solution is the one that actually worked properly and should work fine for 99% of all non only; 0x80072EE2 but key issues not valid genuine key is used.

    I don't remember if it was before I ran the Windows 7 disc or after completing what I got the following error message
    "Windows Activation error Code: 0x80072EE2.

    1)< show="" me="" other="" ways="" to="" activate="">
    2)< use="" the="" automated="" phone="" system="">
    3)< check="" nearest="" location="" (country)="">< next="">
    4)< telephone="" toll-free="" telephone="" number="">
    (A)< option:="" 1="">
    (B)< #="">
    (C) enter the activation number into each box when asked to do so
    1: after entering the right number in each box-< #="">
    2: If you no more; don't remember the exact number you placed in the area or you place
    wrong number
    It is easy to replace (edit) the wrong number and continue.

    BEFORE YOU INSTALL OR REPAIR WINDOWS 7 OR ANY OPERATING SYSTEM *.
    SOFTWARE BACKUP ALWAYS 1 PREFERABLY ON AN EXTERNAL HARD DRIVE *.
    BUT, OF COURSE, YOU CAN USE USB DRIVES OR DVD RECORDABLE RECORD... *.

    Install or repair Windows 7 (in my case, Home Premium 64 bit OEM but the similar method should be used for other windows): -.

    (1) insert my OEM of Windows 7 Home Premium 64 bit disc in my drive (in my case E:\ Drive BD - ROM combo
    -You probably D:\ DVD burner)
    ((2) IF the disc runs automatically and then go to 3) below
    (A) if the disc does not automatically
    1: Start (red, yellow, green, blue & flag (icon) in a circle) in the lower left corner of the screen
    in the taskbar
    2: select it (left click on the mouse button)-computer-select the drive (device with removable storage).
    you put the Windows disk in
    3, select the drive-Yes (if displayed) user account control
    (3) Windows 7 (Windows Installer) is displayed
    (A)< install="" now="">
    (B) install Windows - Get important updates for installation appears
    1:< go="" online="" to="" get="" the="" latest="" for="" installation="" (recommended)...="">
    2: I left checked (selected) the box, which refers, "I want to help improve the windows installation.
    -Useless - do not trust MS & partners - MS should provide free assistance
    especially when their software created problems in the first place.
    3: check the, "accept the terms of the license" (automatically without reading).
    because you have no choice if you want to use.
    4:< next="">
    5: "which type of installation do you want?
    A: I chose < upgrade=""> -because if it solves the problem it would save a lot of time.
    B: custom (Advanced) - to only use as a last resort and after backup all data and applications programs.
    -It is easy to format and install Windows 7 and other operating systems.
    -The main problem is, (the huge amount of time)
    find and restore all; drivers, applications (programs), emails.
    (C) to continue to follow the Wizard (information/instructions)
    (4) I followed the wizard - to give accurate information to reinstall Windows 7, but I received an error message
    -J' have probably first uninstall Windows 7.
    -NB! If you upgrade all software from a previous version do not remove the previous version
    unless directed to do, because he needs evidence that a previous version exists.
    -If you install a full version of a software, it's usually best to uninstall the previous version
    before installing the new version.

    Hope that this record many people losing large amounts of time, I did.

    Before I forget, every time (including recently) I asked for Activation of the aid staff
    They told me to contact Microsoft (MS) Technical Department
    (even to resolve this error: 0x80072EE2, which is a problem of Activation).

    Therefore, I would never check for MS and partners to obtain automatically the information from my computer.
    Occasionally, I'll send messages manually when asked.

    Solved: Error 0x80072ee2 Code and

    The key problem of invalid when key is valid

     

    The problem with computer problems, is that they can lose a huge amount of time

    try to find the right solution that actually works.

    Why I created this issue and the solution is because I don't think that no matter what

    No one helped to solve the problem, and I don't have the time to answer each question.

    Maybe the admin can warn everyone and copy the message to the response section

    wherever it is, thank you.

    This solution is the only one that actually worked properly and

    should work fine for 99% of all and not only;

    0x80072EE2 but key issues not valid genuine key is used.

    I don't remember if it was before I ran the Windows 7 disc or

    After completing what I got the following error message
    "Windows Activation error Code: 0x80072EE2.

    1)< show="" me="" other="" ways="" to="" activate="">
    2)< use="" the="" automated="" phone="" system="">
    3)< check="" nearest="" location="" (country)="">< next="">
    4)< telephone="" toll-free="" telephone="" number="">
    (A)< option:="" 1="">
    (B)< #="">
    (C) enter the activation number into each box when asked to do so
    1: after entering the right number in each box-< #="">
    2: If you no more; do not remember the correct number

    who has placed you in the box or you put the wrong number
    It is easy to replace (edit) the wrong number and continue.

    BEFORE INSTALL OR REPAIR - WINDOWS 7 OR ANY OPERATING SYSTEM
    ALWAYS 1 BACKUP SOFTWARE. PREFERENCE-HDD EXTERNAL

    BUT, YOU CAN USE A USB DRIVE OR RECORDING ON RECORDABLE DVD DISCS...

    Install or repair Windows 7 (in my case, Home Premium 64 bit OEM)

    but, the same method should be used for other windows):-

    (1) insert my OEM of Windows 7 Home Premium 64 bit disc in my drive

    (in my case E:\ BD - ROM combo drive - you probably D:\ DVD burner)
    ((2) if the disc runs automatically and then go to 3) below
    (A) if the disc does not automatically
    1: Start (red, yellow, green, blue & flag (icon) in a circle)

    in the lower left corner of the screen on the task bar
    2: select it (left click on the mouse button)-computer-select the drive

    (Device with removable storage), you put the Windows disk in
    3, select the drive-Yes (if displayed) user account control
    (3) Windows 7 (Windows Installer) is displayed
    (A)< install="" now="">

    1: after you place Windows in the drive do not touch keyboard keys

    while restarting the computer (once it has been shut down

    Just enter the password to log back on and ignore the error messages
    (B) install Windows - Get important updates for installation appears
    1:< go="" online="" to="" get="" the="" latest="" for="" installation="" (recommended)...="">
    2: I left checked (selected) the box, which means,.

    "I want to help improve the windows installation.
    -Useless - do not trust MS & partners - MS should provide free assistance
    especially when their software created problems in the first place.
    3: check the, "accept the terms of the license" (automatically without reading).
    because you have no choice if you want to use.
    4:< next="">
    5: "which type of installation do you want?
    A: I chose< upgrade="">

    -Because if it solves the problem it would save a lot of time.
    B: custom (Advanced)

    N ' use as a last resort and after backup all data and applications programs.
    -It is easy to format and install Windows 7 and other operating systems.
    -The main problem is, (the huge amount of time)
    find and restore all; drivers, applications (programs), emails.
    (C) to continue to follow the Wizard (information/instructions)
    (4) I followed the wizard - to give accurate information to reinstall Windows 7,

    but I got an error message.
    -J' have probably first uninstall Windows 7.
    -NB! If you upgrade all software from a previous version

    do not delete the previous version unless told to do so,

    because he needs proof that there is a previous version.
    -If you install a full version of a software, it's usually best to uninstall - previous version
    before installing the new version.

    Hope this save many people lost large amounts of time that I lost.

    Before I forget, every time (including recently) I asked for Activation of the aid staff
    They told me to contact Microsoft (MS) Technical Department
    (even to resolve this error: 0x80072EE2, which is a problem of Activation - I couldn't believe it).

    Therefore, I would never check for MS and partners

    for the information automatically to my computer.
    But, sometimes I send messages manually when asked.

    MS have done at least millions of people that help the MS, but still

    MS refuses to provide Support Free Chat in the world.

    -How much profit is MS wants to do,

    especially in situations when in fact MS software causes problems.

    To save space the administrator can delete previous versions of courrupted.

    I only hope that the conversion software does not change the format of this version too.

  • Windows Update has failed. "Error found: Code 8007001F Windows Update encountered an unknown error." _

    RALink - network - 802.11n/b/g Wireless LAN USB 2.0 Mini adapter 379ko

    Windows Update has failed. "Error found: Code 8007001F Windows Update encountered an unknown error."

    I bought a wifi USB adapter and it is a driver windows 7 available on the manufacturer's website. RALink

    http://eng.ralinktech.com.tw/support.php?s=1

    My computer is a HP P6110f desktop computer. It came with a Vista 64 OS which I've upgraded to a Windows 7 Home Premium.

    I tried to install all kinds of different ways but were not able to make it work.

    Disconnect all other devices driver/software uninstalled and reinstalled all plugging adapter in each computer startup I tried port USB with adapter connected and also connect after windows load discharged from all applications running, including firewall and anti-virus

    Can you please help me solve this problem? I consider myself quite computer but I'm completely puzzled here.

    http://social.answers.Microsoft.com/forums/en-us/category/Windows7
    Windows 7 discussion groups

    They may be able to help in obtaining the wifi USB adapter to work.

    8007001F (a device attached to the system is not functioning) TaurArian [MVP] 2005-2010-implementation to date of Services

  • KB978601 and kb979309 update failed: error 800b0100 code

    Windows Update says that I need these two updates of security, but it cannot install them. I can install all other updates but these two. It just says 'update failed' and gives me the error 800b0100 code. Anyone know if it is a general problem or if it's just my computer?

    Windows Update says that I need these two updates of security, but it cannot install them. I can install all other updates but these two. It just says 'update failed' and gives me the error 800b0100 code. Anyone know if it is a general problem or if it's just my computer?

    A general problem? N ° If it is Vista or Windows 7, see: Windows Update, error 800b0100

    If the system is running Windows 2000, Windows XP, or Windows Server 2003, see: error message when you try to use Microsoft Update or Windows Update Web sites to install updates: '0x800B0100'

    You may find that you can download save manually, and then install the updatesKB978601 KB979309 first, then then and who can fix the error. You can download the two updates from the Microsoft Download Center. Don't forget to download the update for specific version of Windows and the architecture that the system is running. EX: If it is Vista 32 bit, then take the 32-bit version of Vista. If it's Windows 7, 64-bit, then download and save the 64-bit version.

    MowGreen Services update - consumer safety

  • Update error 80072EFE code

    error 80072EFE code when you try to update and nod32 messages popping up saying that it blocks web sites.

    Hi hermenegildogildoshine,

    1. did you of recent changes on the computer?

    2 do you have installed on the computer ESET security software?

    The error 80072EFE occur perhaps caused by one of the following problems:

    (a) applications or processes that interfere with Internet communications

    (b) problems of resource on your computer

    (c) a strong activity on the Internet

    (d) recoverable database errors

    See the below Microsoft article and try the steps mentioned, check if it works.

    You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

    http://support.Microsoft.com/kb/836941

    The error of nod32, you would receive if ESET security software blocks Web sites.

    I suggest that you check in the ESET security software to unblock websites.

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Vista SP2 Installation fails (error 800706BE Code) via Windows Update

    I am running Windows Vista Business (32-bit) SP1 and I noticed that Vista SP2 is available for download by manually checking in Windows Update last night.  After having seen that it is a large download (more), I started the download, left my PC and left the House.  When I got home, my screensaver was away and when I attamped my password to disable the screen saver and see where I was in the process of updating, my password did not work.  Then I did a hard reboot but then could not connect under my admin user account.  I've then logged in as my wife (standard user - no password) and went to Windows Update where I noticed that the SP2 for Vista Installation fails (error 800706BE Code).  I spent most of last night and all today so far tried to solve this problem.  There are several problems here... When I click on "Install" in Windows Update, I get a message of "is not necessary: 1 update" (even when I look in the installed updates it says that the update failed).  If it is not necessary, then why is it listed as an important update that must be installed?  Endless loop... In addition, I'm not a password reset for my connection because I have a password saved on a flash drive.  Then I tried using all the older passwords that I remembered and none worked.  Shift caps lock was not on either.  I've logged in as my wife, went to the Microsoft Download page and eventually find the link to download the standalone version of SP2 Vsita, but after downloading the massive file, I didn't have the right to install it because I can not connect as an adminstator!

    (sigh) Can someone please help with this?  Thank you

    Naveen,

    Thank you very much for your suggestions!  Your suggestion of restarting, press F8 and choose "repair your computer" worked.  I was able to do a system restore and I chose a date where my old password was still in use (I had just been invited to change a few days before I tried to download Vista SP2).  In addition to losing my cookies and automatically complete IE8 - everything is back to normal.  I have not yet tried a 2nd try to SP2, and I'm very hesitant to do it now!

    Thank you once again!

  • Error 0x8024002D code

    It says I need a disc to install a windows service pack 3 office xp update. Why? When I bought my laptop, everything has been pre-loaded.  I tried to download for about a month and get error 0x8024002D code.

    Hi Cindi,

    There seems to be a problem with Windows Update.

    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows XP

    Error message when you try to install updates on the Microsoft Update or Windows Update Web site: "0x8024002D".
    http://support.Microsoft.com/kb/958041

    Good day!

Maybe you are looking for