The required line not found in the INF.
I tried to install a webcam Logitech QuickCam® Communicate STX (x 64 compatible Vista) on my new Vista SP2 Home Premium 64 x machine. I received the following message is displayed after the installation of the material: "the required line was not found in the file INF." it does not say what the "required" line is just that it is not found. I downloaded the latest Logitech drivers, and it's the same thing. After much research and attempts to solve the problem with the advice of the Logitech, Microsoft, anyone frome one search on Google that had a suggestion, I bought a "LifeCam Cinema" model number 1393 brought home and follow-up instructions instalation - same as before. I downloaded the latestest microsoft drivers, uninstalled "LifeCam" then installed the latest drivers. The same thing happened again. Is someone can you please tell me what the "required" line is to. It seems not to be in any installation downloads.
Thanks for your suggestions.
Hi geojayhwak,
Post here your number for this logitech webcam p/n.
If you do not now where you can find it check this document: find the part number, model number and product code on your QuickCam Communicate STX
If you want to say thanks to someone just click on Vote as useful (i.e. under each avatar of the user).
If your issue is resolved, please indicate then your wire is with solution.
Tags: Windows
Similar Questions
-
His driver error - HDA bus driver is required and not found
Original title: I downloaded the audio driver for windows xp proffesional and when I install it it say had bus driver is required and not found what I need to do. Please can u help
the model of my Tower is hp compaq dc7800 cmt pc while using the software windows xp proffesional. downloaded the drivers from the hp site yet it say HDA IS REQUIRED AND not FOUND
Hello
Try these steps and check if that helps:
a. Click Start, click Control Panel and then double-click System.
b. click on the Hardware tab.
c. expand sound, video and game controllers.
d. double-click the sound card and then click on the driver tab.
e. click on uninstall the driver.
f. follow the Hardware Update Wizard to update the sound card driver.
Download and install the drivers from the links: ADI High-Definition (HD) Audio Driver for Microsoft Windows XP and 2000: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=3459240&prodNameId=3459243&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=vc-58778-1
-
HDA Audio Bus required and not found
Hello, I have an IBM T60 running on Windows XP Pro. I just deleted from my computer and noticed that the noise was gone. I currently have no audio device installed, according to the sound properties. I'm going to install the driver and rises an error, "HDA Audio Bus required and not found."
Help, please!
Hi Ricecommando,
You can follow the steps in this link and check if it helps.
Hope the helps of information. Please post back and we do know.
Concerning
Joel S
Microsoft Answers Support Engineer -
I try to install Oracle JDeveloper 12 c on Windows 7, but I get the error 'Property CMD' not found in autorun.inf, when I run the file directly.
If I run Oracle installer (as an administrator), I get the file "corrupted", but I think it is misleading.
Google search, this seems to always point to that here where it says
Previously, I had a compatibility issue when installing Oracle Developer (forms, Designer, reports and JDeveloper10g), I corrected as saying that must be run on Windows XP SP2, and that did the trick. But I don't see anything about compatibility via the google search for this problem.
When the exe file is run some tests pre - req gets run as 64-bit JVM and Swap space. The other machine may not have the pre - req.
-
iPhone backup fails with "required file not found."
Basics:
OS X 10.11.4. I have
iPhone 6 + ios 9.3.1
iTunes 12.3.3.17
Photos 1.5
Once I plugged my iPhone in my iMac (2010), I get the following message is displayed:
'Failed attempt to copy to the disk "Macintosh HD". Required folder cannot be found. »
The backup process seems to cling ' step 7: prepare copy items. "
I haven't moved my Photos or music from their default locations, libraries.
I see a lot of people have reported this problem, but no solutions.
Hi pmcgeary,
Please visit Apple support communities.
If the backup of your iPhone using iTunes is not finished, don't forget to try steps 1-2 and 4-6 in the following troubleshooting guide: If you can not make a backup of your iPhone, iPad, or iPod touch iTunes.
Sincerely.
-
"Bus Audio HDA required but not found" - need help
I upgraded my motherboard a while ago and it was working fine, but now it has malfunctioned and I sent it get checked and replaced (still in warranty)
I had to go back to my old temporarilly motherboard and as such I don't have driver disks, most work but my audio drivers do not work. I tried to get drivers on the motherboard (Lenovo) site and I downloaded who he says that I needed, but every time I try to install it I get the message of the title bar. I googled the problem and found a few places that suggested they had a fix for it, but they did not work. Is it possible that it does not work because I don't have Hi-Def audio and that's what he's looking for?
Hello
I suggest you access the link below: http://support.microsoft.com/kb/2519434
Also, install updated audio driver on the manufacturer's Web site, you can check the link for the steps below: how to manage devices in Windows XP: http://support.microsoft.com/kb/283658
-
Table not found but the data in the Table are available
Hello
I connected as SYS.
When it is placed below query in sql navigator, no line not found.
Select * from dba_objects where type_objet = 'TABLE' and object_name = 'GREM. "
But when placed under query, the rows are retrieved.
Select * from grem.
How is that possible?Hulk says:
It returns: SYNONYMSo, you have your answer. Now, you can issue:
column tbl format a79 select nvl2(table_owner,'"' || table_owner || '"."',null) || table_name || nvl2(db_link,'"@' || db_link,'"') tbl from dba_synonyms where synonym_name = 'GREM' / {code} and see what table synonym points to. SY.
-
Required, not found HDA Audio Bus driver. XP SP3
I run a computer custom made with Windows XP SP3. Under other devices with a yellow question mark is multimedia Audio Controller, through the PNP ID, I discovered it was Analog Devices ADI 198 x integrated Audio. I found a driver (not sure if it was good) and when I went to install the error "HDA Audio Bus Driver required and not found do not" pop up. There is no Bus Microsoft UAA HDA Audio driver also under system devices. I appreciate all the help you give me. It feels like I tried all the solutions, but I'm open for anything at this point. Thank you!
I appreciate your help theplectrum! I went to the Intel Web site to find a driver of Ethernet controller, so I ran the driver update utility. He found a driver of sound for me as well. I installed and rebooted and now I have sound!
-
L10 start problem - "SHDOCVW.dll is not found.
When I start my laptop there is a message 'SHDOCVW.dll is not found' instead of icons on the desktop and I can't use my laptop more. Please help me cause I'm new user only. Thank you to.
Hello
Check it please this page http://www.pcfixtool.com/dll-errors/2339/2/required-shdocvw-not-found.html
I hope this will help you understand what is happening. You can try to start the machine in safe mode by pressing F6, while the unit will start and try to install a new copy of the file manually. Check out this page http://www.ascentive.com/support/new/support_dll.phtml?dllname=shdocvw.dll
You will find a brief explanation how to do this.
Good luck!
-
The LifeCam Cinema hardware installation error
Tried to install Lifecam Cinema 3.0 but keep on receiving an error message "Required line was not found in the INF" - OS is Vista Home premium editionLifeCam installed on my laptop XP
Hi seuss460,
LifeCam software version 3.2 is available; Make sure you install the correct software for your hardware.
You can download software LifeCam here
Step 1: You can follow the steps mentioned in the article below
Troubleshoot installation of Intellipoint and IntelliType LifeCam software
http://support.Microsoft.com/kb/953691
Step 2: See also the steps mentioned in the article below
Troubleshoot failures to find the new LifeCam hardware
http://support.Microsoft.com/kb/929087
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Original title: Plustek OpticBook 3600 is not installed
Found new hardware wizard runs, but after scanning stops the disc from the manufacturer with the message ' year error occurred during the installation of the device.» The required section was not found in the INF"
PC system is homebuild which, in theory, exceed the minimum requirements of the system of manufacturers. Operating system is Windows XP Pro with Service Pack 3. The scanner is connected to the USB 2.0 card that is not separately powered, but installed in the PCI slot. I suspect that the problem lies in the PC rather than the scanner. but do not know what the problem is. Any help would be appreciated!
Hello
You can try the troubleshooting provided in the link below steps to fix the problem.You receive a "unable to install this hardware" or "an error has occurred during installation" error message when you try to install a PCI device
http://support.Microsoft.com/kb/841567
Note:
To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756
See also:
Error message: cannot install hardware. An error occurred during the Installation of the device
-
Original title: Media Player
Yesterday, I downloaded a song. Now my Windows Media Player will not play anything.
I get the same room whenever I try to start each song in my library:
Media usage rights acquisition
wmasf.MusicNet.com
A license is required to play the selected song or video. However, a license for this file is not found, has expired or has been altered. To obtain a license for this content, please visit the website or open the software application in which the file was uploaded originally. You need to connect or buy the song or the video.
I ran several diagnostic, and remedial programs, but nothing worked to get media player to work (without getting this popup Media Player and stop).
It seems to be a kind of malware that has damaged something in my windows media player. When I put "wmasf.musicnet.com" in the address line on explore, I get only the same message as the pop-up.
Anyone know how I can fix the media player and get rid of this problem?
Hello
I would suggest trying the following methods and check if it helps.
Method 1:
Run the troubleshooters in Windows Media Player and check if it helps.
Open the troubleshooting Windows Media Player settings Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Media-Player-Settings-troubleshooter
Open the troubleshooter in the Windows Media Player library:
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter
Method 2:
Try to reset the management of digital rights (DRM) and check if it helps.
Follow the steps to reset the DRM:
1. first of all, check that the hidden files and folders option is enabled.
To do this, follow these steps:a. start Windows Explorer. To do this, click Start, type userinit.exe in the Search box and press ENTER.
b. click on organize, and then click folder and Search Options.
c. click on the view tab.
d. click Advanced settings.
e. under hidden files and folders, click Show files and folders, clear the Hide protected operating system files (recommended) box and then click OK.
2. Locate the DRM folder on the computer.
In general, the DRM folder is located in the following location.
Note In these paths, drive represents the drive on which Windows is installed.
Windows 7 or Windows Vista.a. Windows 7 or Windows Vista versions x 86-based
drive: \ProgramData\Microsoft\Windows\DRMb. Windows 7 or Windows Vista versions x 64-based
drive: \ProgramData\Microsoft\Windows\DRM3 Rename the file DRM DRMbackup.
a. right click on the DRM folder and then click Rename.
b. type DRMbackup, and then press ENTER.
c. close Windows Explorer.
Warning: You must contact any third-party stores where you purchased music to reset the licenses for that music. If you copied CDs for protected Windows Media Audio files, the CD must be copied again.
For more information, see the following Microsoft article.
The Player Windows Media DRM: frequently asked questions:
http://Windows.Microsoft.com/en-us/Windows7/Windows-Media-Player-DRM-frequently-asked-questions
Hope the information is useful.
-
I can't do the importing CDs ITunes says "the required folder is not found."
Hi all
I have a windows laptop with no disk drive 10. I am using an external disc drive to import CDs into iTunes. Everytime I try, it will be important to a song, and then he said: ' year error occurred importing the song title. " required folder is not found. After that, he's trying to start the import again and asks me if I want to replace the etc... help of songs
Try to repair the security permissions for iTunes for Windows.
TT2
-
DDL required for the complete installation was not found. Error 1603. What should do? A link where to download the required DLL? Kindly help please.
I tried everything, but received the same message. Attached to the screenshot.
-
Whenever I have use SEARCH after STARTUP I get a message saying that a required file is missing, and that maybe I need to run the installation program. How can I retrieve the missing file and difficulty of RESEARCH?
Try this link:
"Error message:"a file that is required to run the search wizard is not found.
<>http://support.Microsoft.com/kb/319949 >HTH,
JW
Maybe you are looking for
-
B1 - A71 Bootloop and unable to factory reset
HelloI've known the partition error trying to pass, so I applied the patch Acer. Since then, I've been unable to boot.I tried the hard reset and even get into recovery to do a factory reset. Whenever I'm in recovery and select the options the Acer lo
-
How to synchronize HAVE with the meter?
Is it possible to syncronise HAVE and readings of CTR? I use a unit of M series and LabVIEW I created a task HAVE several entries with the CTR of a channel that serves as a measure of angular position. It is easy to make a measure of countinous store
-
How to empty the bin RECYCLER folder
Can someone tell me please how to empty the recycler bin folder? I know how to show hidden files and folders and uncheck Hide protected operating system files. However, the empty trash is grayed out. There is almost 4 GB so I not went. Any info w
-
Hello! I created a large number of files on my project, and I also use the Facebook SDK. Now, when you try to compile allways throw me this error: I/o Error: Cannot run program "jar": CreateProcess = 2 error I read in the forum that the problem is th
-
Save the changes to a presenter Video Express project.
It is not clear to me how to save changes to an existing project. I just spent some time annotating and prune a few clips and left for a meeting. When I came back to open the project again all previous work I did was gone.Is there a workflow I should