Error of Mountmgr.sys after trying to install XP

Similar Questions

• error A 80071, 90 - after trying to install security updates, the PC reboots but cannot configure Windows

  Try to download security updates, but after restarting the computer it says it can't reconfigure windows?

  Hello

  I also have this problem with the error code A 80071, 90 now on a total of 13 edits. Number of KB include: KB2731847, KB2705219, KB2722913, KB2647753

  I tried several times, I've used Fixit to http://support.microsoft.com/kb/836941 , who reports that he found and fixed two problems, yet when I try another day the same error is there.

  Any suggestions what to do?

  Operating system: windows 7 x 64

• STOP STOP 0x0000008e error error messages appear after trying to install Windows XP on the new drive

  Original title: Stop error 0x0000008e error displayed after trying to install Windows XP on the new drive

  STOP 0x0000008e error. Also setupdd.sys - address F740DFEA base at F73EC000, Datestamp41107c8f. After trying to install Windows XP on a new hard drive. Never been in the BIOS. A bit afraid to change much, but it is said that the caching and shadowing should be turned off and boot into Safe Mode, but I cannot get Safe Mode because there is no OS on the drive. Also, he wants to know if I want to install Windows XP to a partition on the disk. I looked at other readers, and there is a partition, so I think I should. Any information would be appreciated. "Just an old fart."

  Hello

  See the following article: error message "STOP 0x0000008e" during the installation of Windows XP

• After trying to install word printer epsom has not stopped workung - uninstalled but stll not working not

  After trying to install a printer, Epsom SX130, on Windows 7, WORD has stopped working - have tried uninstall & restore but still cannot use WORD. After paying only £ 65.00 to restore the office, I'm very unhappy. It is the only document that we need to print, others may be sent by e-mail, but now I can't even open Word documents to use as attachments to an email. I'm totally desperate, do we buy a 'small' I wonder. More than 60 years, when I started it, maybe I was just too old or it's Windows 7 just make my / our life uncomfortable for us to update: Please keep in mind, I'm very, very, ridiculous with computers. We have done with a drive by the way if that makes a difference & downloaded an update. If the answer is "not compatible" that's fine, I can make documents on the old computer, BUT need words for emails: i.e. repeat orders etc. which are vital to our system of new physicians.

  Am totally fed up now...

  Hello

  1. what version of Microsoft Office are you using?

  2. you receive an error message when you start Microsoft Office Word?

  You can perform the system restore the computer to the date when the changes were made not (before the date where Microsoft Office was working fine).

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

   

  NOTE: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  For further assistance on the question, you can post your query in Microsoft Office community:

  Microsoft Office community

  http://answers.Microsoft.com/en-us/Office/Forum/Office_2007

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Tecra S11 BSOD after trying to install BIOS v3.1

  Tecra S11 BSOD after trying to install BIOS v3.1

  I have reinstalled all utility fingerprint successfully. After that I tried to install the new BIOS v3.1, but I got the BSOD
  Win 7 pro
  Where can I find the minidump to see what file that are the problem?

  C/windows/minidump folder is empty.

  Hello

  Do you get the BSOD during the BIOS update procedure?
  Are you using the Windows operating system preinstalled Toshiba? or did you install your own system?

  If you have installed your system, then you should check that the VAP is installed as well.

  Also, I found this info about the update to the BIOS:

  + Attention! +

  + Please close all applications before running the update. +

  + At the end of this process, the computer will be restarted in order to update the EC. +
  + While updating the CE, the screen will not appear and the power LED etc can blink. +
  + The computer may restart several times. There is no abnormal behavior. +
  + Please wait until the computer is restarted fully. +

• Error code received 646 when trying to install update KB981715

  Error code reveived 646 when trying to install update KB981715.  If the automatic update is enabled, why should I even receive an answer?

  Common problem. Download the updated Office and install it manually.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=D5135DEE-5B41-4C05-9483-A82045C8F4F5&displaylang=en

  Save it to a location on your hard drive, you can find and then manually install it.

  TaurArian [MVP] 2005-2010 - Update Services

• C:\Windows\system32\sfc.dll is the error message I receive while trying to install a game on a DVD.

  When I close the error message the game window tries to install then I get a file closing message installation failure.     Setup.exe bad Image C:\Windows\system32\sfc.dll

  Probably, you need perform the repair facility, see this link http://www.sevenforums.com/tutorials/3413-repair-install.html

• win xp sp3 restart after trying to install edimax ps-1216u for printer laserjet p1102

  win xp sp3 restart after trying to install edimax ps-1216u for printer laserjet p1102
  I have the printer installed that tried to install edimax ps-1216u and when it tries to install the printer, the computer restarts

  Problem solved! I have disabled smart installation with SIUttility for this computer. I have manually installed the printer by adding the port tcp/ip standard and all is ok now.

• After trying to install the updates. my computer is now stuck in constant reboot mode while showing "Configuring updates 3 of 3 0%, do not turn off your computer.

  Visa update problem

  After trying to install the updates.  my computer is now stuck in constant reboot mode while showing "Configuring updates 3 of 3 0%, do not turn off your computer.  I tried to follow the instructions provided here because it seemed to be the same problem.  But when I restart and hold down the F8 key so I can boot into safe mode, I tried selecting safe mode and I get the same results, and I tried again by selecting the option 'Disable automatic reboot' which seems to be an option on the same page with the option of safe mode.  Whatever it is, the same message comes back and I can never get to where I can see my desktop to click 'start '.  I can't get out of this cycle.  I installed the update because it said I needed to install it.

  *************************************************************************************************************************************************

  Turn off your computer by holding the power button for about 20 seconds.
   
  Start your computer in safe mode: press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears
   
  Disable the automatic restart in the event of system failure:
   
  • Click Start
  • Click on Control Panel
  • Click on system and Maintenance link.
  • Click on the system link
  • In the left pane, click Advanced system settings
  • Locate the startup and recovery area, click the settings button.
  • In the startup and recovery window, uncheck the box next to automatically restart.
  • Click OK in the startup and recovery window
  • Click OK in the System Properties window
  • Close the system window
   
  After that... While STAYING in safe mode I do a system restore and maybe try a manual install of the update later.
   
  For the sake of space I refer you to the article about how to proceed.
   
  System restore
  http://windowshelp.Microsoft.com/Windows/en-us/help/9f6d755a-74bb-4A7D-A625-d762dd8e79e51033.mspx
   
  Windows updates: http://windowshelp.microsoft.com/Windows/en-US/Help/8f259118-0d61-4c7a-8c56-24987e87a8171033.mspx
   
  Please let us know if this solution works for you

  Theresa
  Microsoft Answers Support Engineer

  Hello

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• After trying to install a specific program, I get this appcrash, check the event log,

  * Original title: app Crash

  In general, I store my programs on a USB key. I've never had a problem installing or running

  install them on my computuer using windows 7 home edition 64-bit.

  Lately after trying to install a specific program, I get this appcrash, check the event log.

  It seems to say that the file for this installation is damaged, but how can this be since the installation has worked before?

  Get corrupted - it happens.  Jump drives die all the time.  You might be able to reformat (erase) and get more life out of it, or you can get a new USB, install again and use it until it is damaged again.

  Average life of a disk is 5.2 years, but just like people, many drive die younger and many die older. You never know what will be yours.

• After trying to install updates error 80070643 # appears

  Continue to receive the error code 80070643 # after attempting to install updates. Update for microsoft Net Framework 4. Have tried several times to update with

  without success.

  Windows Update error 80070643 http://windowshelp.microsoft.com/Windows/en-US/Help/e5304fc1-9264-4d97-9c35-3c3ad167e1701033.mspx>

  UTC/GMT is 16:48 Thursday, September 1, 2011

• Error 800b0100 code after trying to install KB2416470

  I tried to install this update of security for some time now. I tried to install the analysis TOOL and I still have this problem. Also, I rebooted the computer and tried to cut the firewall so to download. Always down. Whats up with that?

  I guess I'll mention that I have a Windows Vista HP laptop X 86 - based PC still ruin on the Service Pack 2 due to this update has failed.

  LaurainFlorida,

  First, configure the computer to start in minimum mode - How to solve a problem by performing a boot in Windows Vista or in Windows 7

  NOTE: in the Clean boot state all the 3rd party firewall will be disabled. Make sure that the native Vista firewall is now activated by clicking on the start ORB, in the Start Search field type in the fire. Under, click on Windows Firewall to ensure that the programs that he is now.

  When you have restarted, it as a clean boot, click the round of departure.
  In the field type to find in the programs.
  Under programs, click programs and features
  Click once on the Microsoft .NET Framework 3.5 SP1.
  In the Menu bar, just above the list of programs, click Uninstall/Change. Accept the UAC prompt.

  Wait for the window to load and then make a mark next to repair, then click the next button.
  If the repair operation is successful, Cancel the boot minimal steps nowand restart the computer.

  Download and Save KB2416470.
  Security Update for Microsoft .NET Framework 3.5 Service Pack 1, Windows Vista Service Pack 2 and Windows Server 2008 Service Pack 2
  Because it is the correct update for your computer, click the button download next Windows6. 0-KB2416470-x 86.msu .

  When the download is complete, close all open programs, applications and browsers.
  Now install Windows6. 0-KB2416470-x 86.msu
  Restart the system, if you are prompted to.

  If the failure of the repair operation, you must uninstall Microsoft .NET Framework 3.5 SP1, reboot, then download and Save .
  Microsoft .NET Framework 3.5 Service Pack 1

  Suggest that you leave the computer in clean boot configuration when you do the above.
  After that .NET Framework 3.5 SP1 installs, Cancel the Clean boot as follows.

  After you restart the system, updates for the .NET Framework 3.5 SP1 should be revived to him through Windows updates.
  If all goes well, they will install now.

  MowGreen
  Expert in Windows IT Pro - consumer safety

  * - 343-* FDNY
  NEVER FORGOTTEN

• Error 43 then he was trying to install Adobe Creative cloud after cloud was not able to connect and access or update applications.

  Mac OS X on iMac 10.10.5 5 k that has Creative Cloud apps since last year.  I used AdobeCreativeCloudCleanerTool to clean all Adobe applications and am still having the same problem.  NEED HELP!

  _______________________________

  We encountered the following problems:

  Setup could not copy a critical file.  Please try

  install again.  (Error code: 43)

  _______________________________

  I tried to manually delete the files, it is stated in the Adobe support: code 43 error when you install Adobe Creative Cloud

  I also tried to install under a new admin user account.

  Hello

  Please try

  Code 43 error when you install Adobe Creative Cloud

  Concerning

  Kuldeep

• Cannot start Windows after trying to install the Vista SP2

  I just tried to install Vista SP2 and now whenever I try to turn on the cpu it gives me a blue screen and restarts. It does allow me to start in SafeMode either. In addition, it seems to be impossible to find my restore points. I was able to stop the screen using the F8 menu and it gives me this error on the blue screen

  STOP: 0X0000007E (0XC0000005, 0X81C223BB, 0X803998F4, 0X803995F0)

  For some reason, when I go to the cmd prompt to advanced troubleshooting guide, I can do, he says that I am the X and not the C drive, if that has something to do with my restore points does not.

  I tried to get the menu of the restoration on C manually through C:\windows\system32\restore\, but nothing was there.

  Any help would be appreciated. I will not lose rather all my data in a reformat.

  Thank you
  Matt

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you installed SP2?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  
  0X0000007E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
  A system thread threw an exception who did not catch the error handler. There are several individual causes for this problem, including the hardware incompatibility, service driver or defective peripheral system or software problems. Check (EventVwr.msc) event viewer for more information.
  
  Source: http://aumha.org/a/stop.php#0x7e

  
  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:
  
  0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred. [emphasis]
  
  Source & more: http://msdn.microsoft.com/en-gb/library/ms795746.aspx

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; ( Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error in line ACPI while trying to install Windows 7 on DELL inspiron N4050

  Hey guys. I have Dell inspiron N4050, I was trying to install a new copy of Windows 7 Ultimate and after installing, it rebooted I get a screen blue error which reads: a problem has been detected and windows has shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: the BIOS in this system is not fully ACPI-compatible. Contact your system provider for an updated BIOS. Technical information:

  STOP: 0X000000A5 (0X0000001D, 0X00000000, 0X00000000)

  If it shows nothing there hardware related issues.