Error on my HP Officejet 5600 series printer

Similar Questions

• My HP Officejet 4300 Series printer is not printing-"printer error says"no connection to the computer.

  Original title: My HP Officejet 4300 Series printer not print

  The mistake of the printer says "no connection to the computer. The computer error says: "the printer is offline. All necessary cables are connected. What should I do?

  Hello

  Have you made changes on the computer before this problem?

  I suggest you try this method and check the status of the issue.

  Printer in Windows problems.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  You can also refer to:

  Resources for the resolution of the printer in Windows XP problems.

  http://support.Microsoft.com/kb/308028

• HP Officejet 4630 series: printing error

  Hello

  My printer was fine until 'Windows10 update 1607' has been downloaded on my desk a few days ago. Now every time I try to print anything for my computer. Status reports "error-printing".  I ran the trouble shooter print a test page, I printed a report of diagnosis of HP print and Scan doctor. Everything seems fine, but it always brings a printing error. So now I'm re-printing a document, it now says "printing" on the device, but it feels very, very slow, 10 minutes and it's still printing the first page. What can I do to fix this?

  Your help in this matter is much appreciated!

  Welcome to the community @BeeAnn HP

  I saw your post on the slow printing problem and wanted to do some of my own suggestions.

  You can try the following:

  1 reset the printer, then restart the computer. Make sure that the printer is connected directly to a wall outlet.

  Turn on the printer.

  With the printer, unplug the power cord at the back of the unit.

  Unplug the power cord from the wall outlet.

  Wait at least 15 seconds.

  Plug the power cord into the wall outlet.

  Reconnect the power cord to the back of the unit.

  If the printer does not by itself, press the Power button to turn it on.

  2 run printing scanning and Dr.

  3 try to make copies to see if they are too slow. If they are, then it's showing us that there is a problem with the hardware with the printer.

  4. Uninstall and reinstall the printer driver and software.

  Let me know how make you out!

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

• 5600 series printer ink level my speedometer stop working

  This use of the built-in work before the print job starts showing you how much ink

  This scale counter was in the black cartridge and color.

  This use of the built-in work before the print job starts showing you how much ink

  This scale counter was in the black cartridge and color.

  Hello

  You will have to contact HP support for this problem.

  Make sure you have the latest drivers and software for this device.

  Printers and multifunction:

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-002&h_lang=en&h_cc=us&h_product=18972&h_page=hpcom&cc=us&lang=en&h_client=S-A-R163-1

  You can also ask this question on the HP Support forums.

  Printers and all-in-one - HP Support Forum's:
  http://h30434.www3.HP.com/PSG/?category.ID=inkjet

  Or, contact HP support.

  Call Support and Service the customer of HP Officejet Pro 8500 has e-All-in-One Printer - A910a:
  http://h10025.www1.HP.com/ewfrf/wc/contacthp?cc=us&DLC=en&lang=en&LC=en&product=4083969&x=5&y=14

  Concerning

• I can't get my HP Officejet 4300 series printer to print. When I right click, it says 'offline', but it won't let me change it to "in line". "." Any suggestions? Thanks /.

  I can't get my HP Officejet 4300 printer to print.  When I right click, it says 'offline', but it won't let me change to "online".
  Any suggestions?  I feel I have tried everything. What happened in the past, however, if I "right click", I could change to "online".
  but now it won't.  What can I do else?

  Hello

  1. have there been recent changes to the computer before the show?

  Method 1: I suggest to follow the steps provided and check if it helps.

   http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02221706&cc=us&LC=en&DLC=en#N71

  Method 2: You can also try running the fix it from the link below.

  http://support.Microsoft.com/kb/2027593

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  Hope this information is useful.

• HP OFFICEJET 5600: UNABLE TO SCAN

  Can I print using my HP Officejet 5600. When I open the Solutions Center to scan or another function, it displays a printer I use not i.e. HP Officejet 5600 Series Fax. Please tell us how to change the setting for HP Officejet 5600 so that I can scan.  In the control panel to the correct printer is online and designated as the default.

  Hi there @Shirlene888 , welcome to the forums!

  I saw your post on your Solution Center showing that the fax driver and that you can not scan.

  I would say first of all that is running the print and scan doctor. This diagnostic tool will check for all the conflicts that could be the cause of the problem and try to fix them. Then try to scan and if the tool has problems, made me know what they are in your response.

  If the diagnostic tool has not fixed the issue scan, try to completely uninstall the printer software, restart the computer to complete uninstallation, then download and install the complete driver under the following link. You will need to select the mode of "5600" you have in the list: drivers & software

  Good luck!

• Pavilion 13 p111nrx2: Win10-upgrade, Null, Fax - HP Officejet 4630 series - error 0 x 80070490

  Win10-update, Null, Fax - HP Officejet 4630 series - error 0 x 80070490

  Every day or two, I get this Windows Update failed error (see above).

  Printer: HP 4630 all-in-one

  Computer: HP Pavilion 13 p111nrx2

  Model: E9L41UA

  Operating system: Windows 10

  64 bit

  I completely uninstalled the printer software and reinstalled and reset all my preferences in this regard.  Painful, but did not work.  Also printer keeps going offline and it is supposed to be a wireless printer.  Extremely frustrating to have a wireless printer which never seems to be wireless.

  Someone knows how can I fix the mistake of updating and/or the issue offline?

  Hello
  
  Thank you for using the HP Forums.

  1 start = > settings = > devices = >... . Click and REMOVE an INSTRUMENT: a) Officejet 4630 and b series) Null Fax Printer

  (2) uninstalled all components of 4630 Officejet series in the following order

  HP update

  Improvement of the product...

  Series Officejet 4630 help

  HP Officejet 4630 series based Device Software

  Law 3) clicking Start = > click on MANAGER of DEVICES = > (on my PC) printers = >... .clicked to highlight the Fax Null = > take action in the drop = > UNINSTALL

  (4) restarted my PC

  (5) installed the downloaded/saved full functionality of the HP printer

  (6) again restarted my PC, checked the DEVICE MANAGER (from selection right click Start) - FAX NULL is gone!, check the DEVICES of the SETTINGS (start = > settings), number, NULL, this time FAX - AND - the right HP Fax printer is now installed!

  (7) go ahead and look for the updates, my PC is now updated, no error should appear.

  Hope that helps!

• HP officejet 6500 general printer error error (bed 0 x 61011) refer to the printer documentation

  My HP 6500 office jet suddenly decided to not print and gives me the following message is displayed:

  "error error general printer (bed 0 x 61011) refer to the printer documentation" I have no idea what this means, and don't know how to fix it. Can someone help me? Puleeese?

  Usually the 0 x 6 * point of errors to a carriage jam on the printer.  I will need to know the exact model of the 6500 Series printer you have to point you to the right measures to clear up this problem.  You have the model E709a, E709n, E710a or E710n of the 6500 Series?

• Problem with windows vista, suddenly not to recognize a printer HP 5600 series that was printing correctly for 5 years

  Windows Vista Plug ' n Play does not recognize printer HP 5600 series. HP Solutions Center's says no HP devices detected. Using USP connect since the printer 5 years ago. Reinstalling drivers does not help. Installation with disc says printer is not connected (USB) to the computer, who she really is. Have tried all USB ports on the computer to see if plug ' n play would work. Any help in doing so. How can I solve this problem?

  Hello

  Uninstall and reinstall your printer by using the drivers and information on the HP website.

  Equip your model number of the printer for this information and troubleshooting for her.

  http://WWW8.HP.com/us/en/support-drivers.html

  Or ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/PSG/

  See you soon.

• HP Officejet 5600 all in one series

  since switching to Vista HP disc will not load in what do I do

  You sent a serial number of the printer, the printer not of real number.

  http://h20180.www2.HP.com/apps/lookup?h_lang=en&h_cc=us&cc=us&h_page=hpcom&lang=en&h_client=S-A-R163-1&h_pagetype=s-002&h_query=HP+OfficeJet+5600&submit.x=7&submit.y=6

  Uninstall the printer and its software > click on the link above to HP > find / click your printer model number > select operating system > find Vista drivers/software > download/install according to the instructions from HP.

  And make sure you also download critical updates, too.

  Any other problem, contact HP:

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?lc=en&DLC=en&cc=au

  Online 24/7 support for home and individual HP products

  See you soon.

  Mick Murphy - Microsoft partner

• OfficeJet Pro 8600 +. Error "there is a problem with the printer or the ink system... »

  OfficeJet Pro 8600 +.  Once we replaced the ink cartridges, our printer gives an error "there is a problem with the printer or the ink system.  Turn the printer off, then on.  If the problem persists, contact HP.  We've gone through the start/stop several times.  We also pulled back and ink cartridges in, in addition to taking the print head at.  I ran a diagnostic test download and it comes back with "unknown error (06).  Help, please!

  Thanks for your reply.  We exchanged all Costco ink cartridges and the printer seems to work very well at this point.  Yes, we did all of the print head and cartridge cleanings.  Nothing seemed to help.

• Cannot install the printer HP 5600 Series on Windows 8

  Original title: printer HP 5600 Series

  I have a HP all in a 5600 printer that would not load on a new computer with Windows 8.  I have to return the computer because I'm not buying a new printer?

  Check the HP Web site to determine if the 5600 is compatible (pilot) with Windows 8.

  Alison

• HP officejet 6500 AIO: printer error

  When I try to print from my computer it says that my printer is in error even if I used the HP print and scan the doctor and it solved my problem and I made several pages to test my computer very well, when I try to print from a web view, that it says printer is in error.  My daughter was here and print something from his phone and he printed that also cannot know why it gives me this error message

  I'm not sure what I did but it works now. I think I could have done what you suggested before that I'm yourr reasponse, in any case, it works for now. Thanks a lot for your answer

• OfficeJet 4630 cannot print from Word 2013

  Hello!

  I bought a printer all-in-one Officejet 4630 a few months ago, and all went well until a few days ago: all of a sudden, I was unable to print Word files (2013), or Notepad files ("the parameter is incorrect" message).

  Printing of PDF files and anything from the Web works fine.

  I did not make any significant changes to my computer or a printer.

  I am running Windows 8.1 on a HP Pavilion laptop.

  I tried to uninstall and reinstall the printer several times.

  I ran printing HP and doctor Scan, and it tells me to reinstall the device software, what I do, without result.

  I checked each forum help on the subject.

  Nothing works.

  Anyone, anywhere, has a solution to this problem?

  Hey @LadySteph12,

  Welcome to the Forums of HP Support!

  I understand that you get the error message "the parameter is incorrect" when you try to print Word and Notepad on your computer Windows 8.1 to your HP Officejet 4630 e-all-in-one printer. I would like to work with you today with the resolution of this problem. At this point, it is not a conflict of driver on your Windows computer.

  Step 1: Uninstall the drivers:

  In order to solve this problem, I will need you to have a nice clean slate to work with. So, I'll have you uninstall the drivers for your printer. To do this properly please follow the steps below.

  1. Open the Start on the computer screen by clicking the Windows button on the lower left corner of your screen or by selecting the Windows key on your keyboard to the right of the Ctrl key.
  2. Once your start screen is open, simply type programs and features
  3. Click on programs and features to open it
  4. Once the list of programs fills in the program programs and features, scroll down until you see 4630 Officejet full series or the base driver package and Uninstall it.
  5. Once your bundle of software and the printer driver is deleted, go to the next step.

  Step 2: Delete the Temp folder:

  1. Open your Start screen again by clicking the Windows button on the lower left corner of your screen or by selecting the Windows key on your keyboard to the right of the Ctrl key.
  2. Under your start screen, type run. Click Run to open it.
  3. In the run box, type %temp% , and then click OK
  4. In the Temp folder, select Ctrl + A at the same time on your keyboard to select everything in the folder. Select "delete" on your keyboard. No files and folders on your computer will be deleted. This only deletes temporary files. If a file is always be used by a program on your keyboard will rise pop to 'jump' the item.
  5. Once your temporary files are deleted, close the Temp folder.
  6. On your desktop, right-click on the recycling bin and left, click "empty recycle bin"

  Step 3: Reinstall the drivers:

  1. Please select the following link to download the appropriate drivers for your printer again: e-all-in-one HP Officejet 4630 Printer series full feature software and drivers
  2. Once downloaded, let the installation program to run
  3. Follow the instructions on the screen to reinstall your printer.

  If you need help with the reinstall, please see:

  Setting up the printer on a wireless network for the HP Officejet 4630

  Install the software of HP Print to a USB connection in Windows 8

  After reinstalling your printer, try printing from Word or Notepad. If the error "the parameter is incorrect" pop up once again, proceed to the next step.

  Step 4: Adding a driver replacing:

  1. Open the Start screen (by selecting the windows start button in the lower left corner or by selecting the "Windows" button at the bottom left of your keyboard to the left of the 'Ctrl' key
  2. In the start screen, type "devices and printers".
  3. If the option devices and printers automatically fills, click settings at the top right and then click on devices and printers.
  4. In the devices and printers folder right click on your Officejet 4630 and left click on printer properties
  5. Left click on the Advanced tab
  6. Left-click on new driver
  7. When the new window driver opens just hit 'next' until you see a list of manufacturers on the left and a list of Printers on the right.
  8. Select HP as the manufacturer on the left
  9. DeskJet 9800 select the printer on the right. If Deskjet 9800 is only select "Windows Update" at the bottom left and once the update has been completed, you will be able to select Deskjet 9800.
  10. After selecting Deskjet 9800 hit next complete the new driver Wizard
  11. Under the printer properties window, select 'Apply' but do not hit OK
  12. Select the general tab
  13. Rename your printer in HP Officejet 4630
  14. Click OK
  15. Finally, right click on your Officejet one 4630 more time and click on Printing Preferences
  16. Left click on the paper/quality tab
  17. Left click on the drop down menu 'Normal' for quality printing at the bottom right and change its normal fast
  18. Press apply and OK
  19. Then try to print from Notepad or Word.

  Please let me know if the steps I have provided to resolve your problem. Good luck!

• HP Officejet Pro 8600: Printing of custom formats

  I try to print my wedding invitations.  The documents are WORD documents and they are not your standard size models.  For example, one is 5.85x5.85 but when I print them I get the error of mixmatch.  How do I get my printer to use a custom paper size?  Will be a sad day if I can't print my invitations.

  Help, please.

  Alex

  [email protected]

  Hi @SouthernFried and welcome to the Forums of HP!

  I see you are having problems printing of your invitations. I'd be happy to try to help!

  I'm including a list of the formats supported for this printer paper:

  Specifications for series printer HP Officejet Pro 8600 e-All-in-One Series

  Also, I recommend the following on:

  Create paper formats in Windows 7, Windows 8, and Mac OS X

  Invitations, they have any kind of border on it pre printed?

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!