HP officejet 6500 AIO: printer error

Similar Questions

• HP officejet 6500 general printer error error (bed 0 x 61011) refer to the printer documentation

  My HP 6500 office jet suddenly decided to not print and gives me the following message is displayed:

  "error error general printer (bed 0 x 61011) refer to the printer documentation" I have no idea what this means, and don't know how to fix it. Can someone help me? Puleeese?

  Usually the 0 x 6 * point of errors to a carriage jam on the printer.  I will need to know the exact model of the 6500 Series printer you have to point you to the right measures to clear up this problem.  You have the model E709a, E709n, E710a or E710n of the 6500 Series?

• HP Officejet 6500 general Printer error cox610000f6

  Can anone tell me what an error message means COx610000f6 and if so, can it be fixed and how?

  Code 0x610000f6 is the sign of a carriage Jam. Please see the document located here for transport to unlock.

  Hope this helps, Bartman691.

• OfficeJet 6500 only prints the top of the page

  Have a problem with getting my Officejet 6500 to print the entire page.  Top of the body impression seems to be running on the top of the page, as if the paper was not inserted enough away early in the cycle of printing.  Became "paper mismatch" error message briefly, but that does not appear now.  To check the installation of the printer for proper paper size (8.5 "x 11").  Was printing normally until recently.  Uninstalled and reinstalled HP web page software.  Any suggestions?

  Problem seems to be resolved!

  The printing Assembly that fits into the back of the unit was not completely seated.  There is no warning generated unit that the Assembly was not in place, just erratic behavior and various messages like "out of paper" and jamming of paper.  I recommend that if you are having similar problems, that you check carefully that the back print Assembly is properly inserted into the machine.

  Kind regards

  sciencediver

• OfficeJet 6500 not print pdf files.

  I had this problem for a while and really need help.  My officejet 6500 not print pdf files. It gives me just a little "beep", gushes out a piece of paper and that's it!  Prints everything else very well.  Removed and installed Adobe updated software, but that did not help.

  I found that a McAfee application has been interfering and causes the error.  Removal of this application solves the problem.

• OfficeJet 6500 a print is more black

  It seems that I too was victim of the issue of "change the cartridge and cannot print.
  
  I changed the black cartridge, cleaned the heads several times and nothing.
  Print many pages of test - color... Black work does not work.
  
  I confirmed that the cartridge is properly ventilated.  I even checked to see if the filter to print screen

  head was clean (it was).   I don't really want to order a new printhead, if this isn't the issue and I don't want to

  to run out and buy a new printer.

  Worked perfectly to what I lack of ink this morning... help!

  Hi @crash218,

  Welcome to the HP Forums!

  I see that your HP Officejet 6500 a print is darker. I'm sorry to hear that, but happy to help!

  Please consult this guide, the printer prints blank Page or does not print black or color ink for the HP Officejet 6500 is e-all-in-One Printer Series.

  If this does not resolve the problem, please call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  I hope this helps!

• My Officejet 6500 E709a printer won't scan, it says "no opt. NUM.

  My Officejet 6500 E709a printer won't scan, it says "no opt. NUM.   I am trying to reinstall it but it says that the operating system is not correct. What to do?

  Hello

  Windows forums - Hardware & drivers-French / English

  http://answers.Microsoft.com/fr-FR/Windows/Forum/Hardware?tab=all&TM=1360356493819

  Don

• OfficeJet 6500 e709: printer carriage stuck far right - no. paper jams

  Hello community,

  Recently my carriage of the printer on my HP Officejet 6500 E709n simply ceased to pass on the right side. I turn on my printer and he came with a message of paper jam.

  I checked and traveled all Paper Jam troubleshooting steps and the steps to move the printer, nothing helps.   said videos and done all suggested steop nothing helps.

  The last thing I printed has 3 addresses on envelopes. I have placed all three envelopes in the tray at the top of a stack of paper that was already there. The first envelope print, while the second has picked up two envelopes - but printed on the top - except, I noticed the corner of the return address, although entirely in tact, had a small spot of ink. I replaced the third envelope and it printed fine.

  Please, can someone help me solve this problem?

  @JohnnyBones, welcome to the forums!

  I read your post about the question of jam of transport that you are facing with the Officejet 6500 Wireless printer. I understand that you have already tried the recommended troubleshooting guides, I posted below, does not.

  The following suggestion I have would be to ask to HP directly to see about having the printer repaired or replaced. If the issue was fixable, the troubleshooting steps should have helped!

  1. One "original jam: clear jam and press OK"message for HP Officejet and Photosmart all-in-One Series Printer.
  2. "A 'carriage jam' or ' 0X610000F6" message for HP Officejet 6500 (E709a) and 6500 wireless (E709n and E709q) all-in-One printers

  Join our technical support to the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  If you like my answer to your concern today, click on the thumb to the top below!

  Best wishes!

• MY HP OFFICEJET 6500 has PRINTS IN COLOR WHEN I SELECT BLACK & WHITE

  MY HP OFFICEJET 6500 ONLY PRINTS IN COLOR A. I USE CHROME BROWSER & WHEN I HIT CTRL-P WINDOWS PRINTING HAPPENS & I SELECT "PRINT IN BLACK & WHITE". PAGE SE SO COLORLESS TURNS, I CAN PRESS THE IMPRESSION OF CHROME, BUT MY PRINT PRINTER IS IN COLOR. HOW CAN IT BE CORRECTED SO THAT I HAVE THE ABILITY TO PRINT IN B & W.

  Hi AZGUY47,

  I'm happy that has managed to solve the problem for you, most of the time. Individual programs sometimes do not hold settings, if it is not set in the driver itself. If you have time, you can certainly try to check the updates of Chrome or uninstall/reinstall Chrome as well.

  If you feel that my previous post was a solution, would you be able to mark as one acceptable Solution to others with the same question can more easily find this post?

  Hope this helps, have a great weekend!

• OfficeJet 6500 has printed a full page of black streaks when copying

  My HP Officejet 6500 a prints a black page ridged when the copy of the glass or ADF. I cleaned the glass and ADF and got the same result. I can print the docs okay, it's just when I try to copy when I have the problem.

  That's the bad news, I didn't want to hear. The warranty expired 3 months ago.  (

• OfficeJet 6500: Officejet 6500 not printing not

  My Officejet 6500 will not print. It is in an error state. I loaded the new driver, uninstalled and installed the printer. He was going well until I installed Windows 10.  Someone at - it ideas?

  Well, this should allow you to print:

  1. If the printer is connected via a USB cable, remove it.
  2. Close any programs you have open.
  3. In your search type in printers bar and open devices and printers.
  4. Right click on all the icons in your printer listed.
  5. Click on remove the instrument.
  6. Repeat for all other icons of your printer listed.
  7. In your type of Services Research and open Component Services.
  8. On the left, click Services (Local).
  9. On the right, do a right-click on print spooler.
  10. Click on stop.
  11. Open your drive C:\, then Windows, System 32, coil, and printers.
  12. Delete everything in this folder.
  13. Return to the Component Services window.
  14. Right-click on print spooler.
  15. Click Start.

  Now, if you removed the USB cable, plug it. If this is not the case, go back to the devices and printers and click Add printer to add a new queue for your printer.

  Please let me know the results after following the above. If you are able to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• My HP OfficeJet 6500 wireless printer prints slowly with very long breaks during printing...

  I saw a very old post on this but no solution so I'll try a new position.

  Also, I'm not sure I'm even barking to the top of the tree on the right.

  My PC is running Windows 7 Ultimate 64-bit and is up-to-date with all the updates.

  Recently my Officejet 6500 a more printer E710n-z began to print very slow with long breaks and, in some cases, falling output and in other cases simply do not print.  If I print the various printer and cartridge of test pages from the printer itself, they have long breaks but seem to finally print correctly.  I've been playing with that try to circumvent the problem as long as I'm not really sure print the (from the front of the printer) are always correct.

  I uninstalled the printer and all its associated and software reinstalled using the latest download available on the HP support site, but it made no difference.

  After sanding my teeth to a measure of costly troubleshooting, I bought a set of completely new and installed HP cartridges.  Once again, no difference.

  You don't know if it is a herring or not but when I printed him using both iPrint from my iPhone, as well as the HP ePrint feature email, while still having the very long pause he eventually print a text message only correctly.

  Finally, on the first time I printed the properties/test page it printed the HP, logo, displayed while the ink was drying for what seemed like a minute ago, powered form to another page, delayed for awhile and then printed broadband nonsense, form fed once again, and after another long break printed what appeared to be the upper third or the word Windows.

  Sometimes when printing from the iPhone, it will display a low ink message - even if it has a new set of cartridges HP - and sometimes the PC displays an error saying: he can't communicate with the printer.  Can I still access the printer with the function of Windows printer or HP web access so clearly the wireless network connection is still viable.

  What do you think?  This old printer a year and a half has simply turned into an opportunity to mimic the famous scene copied from office space?  Or has someone else observed or experienced this and knows how I could solve this problem?

  Thanks in advance for help you what can offer?

  Howard

  Redmond, WA

  Thank you.  The article that you included was one of the first I found when I started researching this issue.  I also found articles on other uninstallation methods, as well as to remove and clean the printhead - everything I tried.

  Only, the printer is connected to the wireless network.  The power is connected directly to a wall outlet that I follow for the level of tension and the power used.

  The problem seems to be resolved now.  If she does not return to its recalcitrant ways in a few days, I will consider this closed.

  Here's what I did...

  I was trying to uninstall from the control panel.  I noticed that when I would get the ini file, read all entries in the menu 'Start' mistake had been removed, but immediately after recognizing the error it would make it back to the starting point and put everything back the way he found.  I tried to use the Task Manager to kill msiexe point of error, but it could still roll back.

  Then, for who knows what reason, I tried running uninstall directly from the menu start.  This time, when he stopped and I killed the uninstall process, he stayed collapsed.  I then used the Fusion driver to remove any HP printer drivers that followed RevoUninstaller Pro to find and remove all files followed by CCleaner to clean the registry and associated registry entries.  I'm not advertising or advocating, these are just the tools I've used.

  After a reboot, the printer seems to be [finally] completely gone.  I installed the software again and this time it seems like it should be and [so far at least] works properly as well.  I do not think that I messed up [voluntarily] with this printer because I bought a few years ago.  I don't know what caused it, but it seems that I had several instances of competitors or software drivers in layers.

  I made a clone of the disc and then tried again to uninstall the printer.  Even if it was just after a successful installation and a reboot he would always leave with the same error "Unable to read" in the same place.  The error code in the case where the file is the same as that used by other systems for "not enough contiguous disk space.  I have 384 GB free on a 1 TB drive and Norton reorganizes the disk every week so that the error number can be a distraction, but I have yet to find something better to inform me.  What initially may also be why the restore will not complete successfully or the other.

  Ah the joys of PC ownership.  You have to wonder how many PCs get retired every year simply because the owner has not been enough tech-savvy and pay someone else's expensive with no guarantee of success.

  Sigh...

• HP Officejet 6500 more: printer will not e-mail program scan

  My Officejet 6500 more will not scan to my e-mail program, Outlook Express, taken care of by Yahoo. I have re downloaded the HP print and installed software. Tried again to scan for "e-mail address as PDF", but get the error message "the HP Application scan was unable to save the file at the specified location"

  I use the upgrade of Win10 of Win7. The printer is connected to my cpmputer via a USB cable.

  Any suggestion would be appreciated.

  Thank you

  Thank you for your reply, I tried your suggestion, but it did not work and the reason was a driver error. I have re-installed the driver software of HP and so far that seems to have solved the problem! I guess time will tell. Thanks again for the help, much appreciated, this a great forum help those in need.

• OfficeJet 6500 a: printer

  OfficeJet 6500 a receives the print command but just Springs white pages.

  There the error messages on the screen? The printer will correctly do black or color copies?

  In the paper here troubleshooting steps can help solve the white pages on your Officejet 6500 printer printing.

• HP officejet 6500 a printer works with Mac Mountain Lion but scanner is not

  had a 10.6.8 imac and I used and scan with hp printer HP officejet 6500 a.

  Just got a mac mini 10.8.4 and the wizard migration used to move all my programs and information.

  The printer works just fine but the scanner does not work.  When I try to start the scan by pressing the printer screen it says computer no. detected as part of the message.

  If I click on the scanner icon on my dock it says

  HP Scanner 3 cannot be opened locks of Aproblem.  Check with the developer to make sure that HP Scan 3 works with this version of Mac OS X.  You may need to reinstall the application.  Don't forget to install the updates that are available for the application and OS X.  There is also a report I can click on and sent to apple.

  I got a free mini mac technical support - they helped me with the migration, and then a few days later, I called for what they help me with things that were not working as before.  All resolved but this.  They said contact that HP may be there is something that I can download to make the scanner work?  Hope I don't have to buy a new printer.

  Thanks for the tips .

  Hello

  Yes, go ahead and put this folder in the trash, I would also suggest restarting the Mac and repair disk permissions in order to avoid any possible permissions errors that can impact on the installation:

  Hello
  Follow the steps below to repair disk permissions:

  1. open the Applications folder.
  2. go to the Utilities folder.
  3. double-click on disk utility.
  4 Select the hard disk that contains the boot volume.
  5. go to the first aid tab and select Repair disk permissions.
  Note: This process may take several minutes depending on the Mac and the amount of the permissions that need to be repaired. The progress log shows when the process was completed.

  Once you have finished my steps above to reinstall the software.

  Shlomi