Reviews operations - the operation is not supported

Similar Questions

• Printer does not work on the Windows XP computer, get the error message like "an error occurred during port configuration. This operation is not supported.

  Original title: 1. printer stopped communicating with the computer. 2 port - associated configuration error?

  I have a big problem. All of a sudden my printer - AIO Photo964 said he cannot communicate with my computer. The printer works fine. I tried switching cables USB, all the trouble shooting suggestions, etc. etc. Nothing works and it makes no sense. I can't print anything. I thought it would be that I installed a Seagate external hard drive backup, then I uninstalled the program - no help. ITunes installed recently, because she had changed the printer default, changed back - no help. The USB cable is not tight in the printer (or both cables, I tried), but AFAIK it's not new (?) And when I try to configure the port, I get the error message "an error occurred during port configuration. This operation is not supported"I have no idea what it means.  Can someone help me with this? I have to return a new printer? The USB port on the printer is repairable if this is the problem? How will I know? Who would do that?

  Thanks, I'd appreciate any help.

  It is always useful to have the complete error message without paraphrase.

  It also helps to identify the version of Windows you have, including service pack.

  And it helps to give the manufacturer of the printer in addition to the model.  In your case, I guess you have a Dell printer.  I know that some Dell printers are rebadged Lexmarks, but I don't know if it's a.

  Why you try to configure the USB port?  It cannot be configured - you've discovered.  It's normal.

  It's quite strange that an iTunes installation would have had something to do with the printers.  What printer was made by default after installing iTunes?

  You say you have tried another USB cable.  Have you tried using a different USB port on the computer? Have you checked in the Device Manager (start > run > devmgmt.msc > OK) to see if there is all the warning icons in the category "controllers of Bus USB?

  I suggest you uninstall the printer software and driver completely and reinstall by following the directions in Its first Article.

  Don't skip step 4.  After step 4 and step 5, follow these steps:

  Important: If you have a Lexmark printer, skip the following

  Open a command prompt window (start > run > cmd > OK)
  type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  dependent on the spooler of sc config = RPCSS
  net start spooler
  output

  Note that there is no space before the = and there is a space after it.

  The Windows XP driver for the Dell Photo AIO 964 printer is here--> http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats/Product/dell-964?DriverId=R113115&FileId=2731111743&urlProductCode=False

• I just bought Windows 7 upgrade Windows Vista. I get the error message: operation is not supported on this platform. What should I do to get this latest version in my computer?

  The upgrade from Vista to Windows 7

  I just bought Windows 7 upgrade Windows Vista. I get the error message: operation is not supported on this platform. What should I do to get this latest version in my computer?

  Have you tried to do an upgrade installation or a custom installation?  A custom installation requires you to back up your files and settings with Windows Easy Transfer and then reinstall everything after installing the new.  If an update install does not install work, you need to do a custom.

  In addition, a Windows 7 Anytime Upgrade will not work and you get a message from a platform if you have bought a UA and tried to use it with Vista.  Vista upgrade requires a detail, a copy in the Windows 7 box.

• Linked clone failed: the operation is not supported on the object

  Hi all - I would appreciate help on a related clone operation that is a failure.

  I use Quest vWorkspace to create linked clone VM in my environment.  It integrates with virtual Center and creates from a VM snapshot parent according to normal related clones.  It has just stopped working and I am trying to track down the cause.  The task fails with the error message in the console of VMware vCenter: the operation is not supported on the object.

  The vCentre is 5.5 and esxi.  vWorkspace is v8.0 MR1.  The parent VM is located on an iSCSI datastore.  I tried to put the clones of destination on premises and warehouses of NFS data with the same result.  Unfortunately I can't (don't want really to) move the VM parent from the data store that I have of many VM related to this virtual machine.

  The failure message is a bit generic, so I looked on through the vmkernel.log and vpxa.log and it is an excerpt from the vpxa.log whereby it shows failed task 153.  Can someone please indicate something in the newspaper that had to be examined or another newspaper to look at?

  vWorkspace attached error and below:

  Linked clone has not CreateLinkedClone_Task of CloneVmLinked failed! Task of VMware CreateLinkedClone_Task status error - the operation is not supported on the object. -Call stacks-VmLinkedClone.VmLinkedCloneService.CloneVmLinked String vmInvPath, String strSnapshotMor, String strNewVmName, String strSysprep, ManagedObjectReference morFolder, ManagedObjectReference morResPool, ManagedObjectReference morHost, String strDatastoreName, Boolean bQuickPrep, String domainNameIP, String

  See attachments

  Thank you very much
  Wikus

  Additional accessories:

  • 
    Untitled picture.png

  Hello guys,.

  For those of you already on 5.5, I did a few tests these days. I did find a magic bullet yet as a single parameter that is sure to break but I came up with a workaround.

  I found that if my ESXi server was still on the 5.1, vWorkspace could deploy clones linked via vCenter 5.5 - it's only when the ESXi is also on 5.5 that you have a problem.

  If any of you have ESXi hosts still on 5.1, you can deploy there for now.

  In ESXi 5.x, it is easy to have an ESXi virtual machine. You might want to consider creating some virtual boxes ESXi to deploy on while the vworkspace dev team look at why it does not work.

  I know that this is not the best solution in the world, but it's better than no work around

  Thank you, Andrew.

• Error "operations is not supported on the object." when importing .ovf in the vCloud Director 5.5 machine

  I am trying to import a virtual machine (composed of three .mf, hard, .ovf files), when I try to download the VM, it gets downloaded 100% in the catalogs, but gives an error "Cannot create" as condition to the end and when I check the error in detail, it gives me that "operations is not supported on the object.". Checked the Virtaul Center, I get the same error that 'operations is not supported on the object."in the taskbar. Google it a lot but could not find a relevant solution.

  Just for the record I have DRS activated in full auto mode and only in the aggressive State.

  Can someone help me what I can do to remedy the problem.

  There are two parts to the upload.

  5.5 download dialog box represents the progression to the record of transfer vCloud Director of the FVO.  The download method is via the integration of Client plug-in (which uses the OVF tool).

  If the pop-up window can 100% success, I think that the element of the catalogue shows 50% and tries to download files to vCenter/ESXi as an import job.  If the import job fails, then you need to investigate the newspapers of vCenter/ESXi side for more details.

• Virtual and models - computers cannot move the VM in the folder "operation is not supported on the object."

  Hey everybody,

  We are running vSphere 4.0. During the whole period that we used vSphere, we use vApps and Resource Pools hosts and Clusters to organize and manage the virtual machines used by our production team and test. From what I understand, this can be semantically incorrect (see: http://virtualizationreview.com/blogs/everyday-virtualization/2010/10/vsphere-folder-organization.aspx). So, I've navigated to models and virtual computers, created in folders with permissions of the user and tried to move their respective VMs to their folders... and I get the following error:

  "The operation is not supported on the object."

  So, should I go on the resolution of this or to leave things as they are?

  What are your opinions?

  Is there a right or wrong way to manage VMs of the multiple users?

  Thank you for your time and help,

  Johnathan

  Avinash21,

  Thanks for the tip.

  Move the virtual machines of the TIME solved the problem.

  When I suggest them to the root of the host, I was able to move in a user folder.

  Thanks again,

  Johnathan

• vmrun return "this operation is not supported with the current permit.

  Hello

  I just installed the 5.1 esxi and I have 2 vm windows works well.

  I use the vSphere client to manage the hypervisor.

  I have not installed vCenter stuff, so it is just bare hypervisor os.

  When I ran the following:

  «vmrun t h 10.10.0.9:443 u vpxuser Pei xxx list esx»

  He returns with "this operation is not supported with the current permit.

  In fact, I have installed esxi5 on hypervisor licensing, do not know why I get this error message.

  Access the esxi5 through the sphere client works very well (I could create vm, take snapshots, etc.).

  Please let me know if I missed any steps. Thank you

  -antony

  Welcome to the community,

  with the free license of the hypervisor, access to vSphere API is restricted, which is most likely causing this issue. To unlock the API, you must have a paid license. Unless your host has already exceeded the 60-day evaluation period, you could try to revisit the evaluation mode to see if the command works as expected.

  André

• VixDiskLib_Cleanup always returns vixError (6) - the operation is not supported for the specified parameters

  Any ideas how we can determine what parameters it dislikes?  I am the appellant after VixDiskLib_Disconnect as recomment docs and using the same connection params struct I used with VixDiskLib_ConnectEx.

  Thank you

  -Ron

  UInt32 numCleanedUp = 0, numRemaining = 0;

  /= VDDK 1.1 header says connection spec should be null =/.

  connectParamsP - & gt; vmxSpec = (char *) NULL;

  vixError = VixDiskLib_Cleanup (connectParamsP, & numCleanedUp, & numRemaining);

  vixError (6) - the operation is not supported for the specified parameters

  Ron,

  I think that your connection is probably not use all transport advanced, in which case _Cleanup does nothing. If you connect without using advanced transport, cleaning returns 6 - there is nothing to clean up.

  Thank you

  Annick

• vmrun clone: "operation is not supported"?

  Hello

  I'm trying to clone a virtual machine using vmrun with vSphere/ESX4 by using the following command line:

  "C:\Program VMware VIX\vmrun.exe ' t h esx https://44.1.1.122/SDK u root password Pei clone '[datastore1] model 2003 Win/Win 2003 Template.vmx' "[datastore1] Win 2003 model-X/Win 2003 model - X.vmx" full

  but I get the error:

  Error: The operation is not supported

  What the operation is not supported? I've not seen anything that suggests that ESX4 does not support clone.

  Thanks advance.

  CC

  To be completely explicit:

  ESX supports the operation.

  However, the VIX API and vmrun do NOT support the operation against ESX. Cloning a VM is much more complicated in the vSphere environment that is in a workstation environment and of the VIX API current does not expose this complexity; for example, Clone in vSphere must know the folder in which to place the clone resulting.

• Unable to play video file error: Windows Media Player cannot play the file. The player might not support the file type or a required codec may not be installed on your computer

  Original title: Windows Media Player shows that the new codecs are required

  Original title: query codec and Media Player re

  Have used windows media player for many years on my dell. Usually to see the videos from Sony handycam. Just downloaded wmediaplayer and recent videos from Camcorder will not open one of the videos.

  The following message is displayed "Windows Media Player cannot play the file. The player might not support the file type or a required codec may not be installed on your computer. »

  As I have not changed anything helpful suggestions please.

  concerning

  The winemaker

  Hello

  1. What is the format of the video file?

  2. what operating system is installed on the computer?

  Method 1: Run the troubleshooter in Windows Media Player on Windows 7 settings:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: You can check if the file format of the music files are supported by Windows media player using the link below.

  Information on the types of media files that supports Windows Media Player

  Note: If you have tried to play the file type is included in this table, the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

  Method 3: In addition, you can also download & install the necessary codec to play the files.

  For more information, see: Codecs: frequently asked questions

  (For Windows Vista)

  WARNING of THIRD PARTY SOFTWARE: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information is useful.

• Init DirectDraw(), screen buffer to create Surface() - cannot create a DirectDraw Surface. Hardware closing - DDERR_NODIRECTDRAWHW - one game only DirectDraw object creation was attempted, but the driver did not support any hardware.

  Nancy Drew games - get this error message: Init DirectDraw(), screen buffer to create Surface() - cannot create a DirectDraw Surface. Hardware closing - DDERR_NODIRECTDRAWHW - one game only DirectDraw object creation was attempted, but the driver did not support any hardware.

  Any suggestions?

  Hi gkfuller,

  Have you followed the steps that I recommended above? If this isn't the case, please do and check the result.

  Step 1: Remove the game completely:

  If the above steps do not work, uninstall and reinstall the game should solve this problem.

  How to change or remove a program in Windows XP

  After you have uninstalled the game, check that all the game files have been removed from your computer. The remaining game files will be in one of the following locations (depending on the title of the game and your operating system):

  C:\Nancy drew
  C:\Program Files\Nancy Drew
  For XP: Folder 'My Documents' (C:\Documents and Settings\nom_utilisateur\Mes Documents)

  For more details, see: Impossible to uninstall using Add/Remove Programs

  Step 2: Reinstall the game

   

  To install the game manually, see the steps in the article below.

  http://www.herinteractive.com/CMS/FAQ/install-does-not-start-when-i-put-my-disc

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• iPhone 6 showing the accessory is not supported

  I have an iPhone 6 when I try to load it says that the accessory is not supported and I use the original cable Apple. I can not load unless I turn the iPhone to let in charge. I need someone help me to solve this

  Hello ibrahimfromregina,

  Thank you for using communities of Apple Support.

  I see that you get an error that the accessory is not supported load when you try to load your iPhone.  To help get this problem solved, I suggest that you run through the troubleshooting steps below.

  If an alert says that your accessory is not taken care of or certified

  These alerts can appear for several reasons: your iOS device could have a port of loading dirty or damaged, your loading accessory is defective, damaged or not certified by Apple or your USB charger is not designed to load devices.

  Follow these steps:

  1. Remove all debris from the charge on the bottom of your appliance socket.
  2. Restart your iOS device.
  3. Try another USB cable or charger.
  4. Make sure you have the latest version of iOS.
  5. Contact Apple to set up the servicesupport.

  Recharge your iPhone, iPad and iPod touch

  See you soon.

• ProBook 6440 b: cannot upgrade to Windows 10 - "The CPU is not supported" error message

  Hello everyone

  I have a HP ProBook 6440 b. CPU is intel core i7 M640. It is currently running Windows 7 64-bit edition. I'm trying to update to 10 Windows using Windows 10 Upgrade Wizard and it gives me error. It says "Windows 10 does not work on this PC. The CPU is not supported (NX). »

  Any help will be appreciated. Thanks in advance.

  Hello:

  I suggest that install you the upgrade from the DVD (authoring tool of your own from the link below - media Make).

  https://www.Microsoft.com/en-us/software-download/Windows10

  The DVD will bypass the hardware checks.

  Also, when you install W10 from the disk, skip verification of updates when you are prompted.

• 5132: "the format of the string is not supported.

  Hello

  I'm listening channels of my new USB-5132 on the disk at the same time, using the c# example "scope: live stream To Disk.  I entered "0:1" (without the quotes) in the channel name box.  The result is the error "the format of the string is not supported.  Is there another syntax or example that will allow me to broadcast two channels of 5132 on disk?

  Thank you

  Penny

  Hi Penny,

  Channel string syntax

  If you try an empty string or a string separated by commas (as in "0.1") do you still see this error?

  What version of NOR-SCOPE do you use?  You can find it in Measure & Automation Explorer under software.

  Also, I would be interested to know if you have other devices (besides the 5132) which show the same behavior.

  -Andrew

• niDMM.cs exception: "the device was not recognized. The device is not supported with this driver or version. »

  Hi all!

  I have a question about using a DMM (PXI-4065) with VStudio 2008 and Measurement Studio 2009.

  Because DMM are not always supported in .net, I downloaded niDMM.cs 3.0 wrapper of the web site of NOR.

  I also downloaded example c# measure DC Voltsto compare with my request.

  Both an example and my application fail trowing the exception [-1074118656] 'the device was not recognized.  The device is not supported with this driver or version. " class constructor is called.

  DMM = new InstrumentDriverInterop.Ivi.nidmm ("PXI3::12:INSTR", true, true);

  I guess it is function of device PXI!

  I also tried to use a VISA alias as "pippo" and then I tried to insert a device unexistent name. In any case the same exception was trown.

  NOR-DAQmx 8.9.5

  NOR-DMM 3.0.1

  NI-VISA 4.6.1

  NOR-MAX 4.6.2f1

  Roberto

  Hello Robson,

  Maybe you areusing an incorrect descriptor itrument, try please the instructions contained in the following document:

  KB 33A96PCW: receive error-1074118656 when running OR DMM screws

  Let me know if this might help.

  Best regards.